Search NASA⌕ Search

SEARCH · Search NASA

Results for “plane strain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unconventional spin-orbit torques from sputtered MoTe 2 films

Materials with strong spin-orbit coupling and low crystalline symmetry are promising for generating large unconventional spin-orbit torques (SOTs), such as in-plane fieldlike (FL) torques and out-of-plane dampinglike (DL) torques, which can effectively manipulate and deterministically switch an out-of-plane magnetization without the need for additional external in-plane magnetic fields. Here, we report SOTs generated by magnetron-sputtered 1⁢T' MoTe 2 /Permalloy (Py; Ni 80 ⁢Fe 20 )/MgO heterostructures using both spin-torque ferromagnetic resonance (ST-FMR) and second harmonic Hall measurements. We observed unconventional FL and DL torques in our samples due to spins polarized normal to the interface of MoTe 2 and Py layers, and studied the influence of crystallographic order and MoTe 2 layer thickness on the SOTs. By comparing the Raman spectra of 1⁢T' MoTe 2 samples prepared in different ways, we found a tensile strain in sputtered MoTe 2 films, which might further enhance the generation of unconventional torques by reducing the symmetry of 1⁢T' MoTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Direct measurement of the thermal expansion coefficient of epitaxial WSe 2 by four-dimensional scanning transmission electron microscopy

Current reports of thermal expansion coefficients (TEC) of two-dimensional (2D) materials show large discrepancies that span orders of magnitude. Determining the TEC of any 2D material remains difficult due to approaches involving indirect measurement of samples that are atomically thin and optically transparent. We demonstrate a methodology to address this discrepancy and directly measure TEC of nominally monolayer epitaxial WSe 2 using four-dimensional scanning transmission electron microscopy (4D-STEM). Experimentally, WSe 2 from metal-organic chemical vapor deposition (MOCVD) was heated through a temperature range of 18- 564 °C using a barrel-style heating sample holder to observe temperature-induced structural changes without additional alterations or destruction of the sample. By combining 4D-STEM measurements with quantitative structural analysis, the thermal expansion coefficient of nominally monolayer polycrystalline epitaxial 2D WSe 2 was determined to be (3.5 ± 0.9) × 10 -6 K -1 and (5.7 ± 2) × 10 -5 K -1 for the in- and out-of-plane TEC, respectively, and (3.6 ± 0.2) × 10 -5 K -1 for the unit cell volume TEC, in good agreement with historically determined values for bulk crystals.

2D materials↗
DOE OSTI2023

Flexible Vanadium Dioxide Photodetectors for Visible to Longwave Infrared Detection at Room Temperature

Abstract Flexible optoelectronics is a rapidly growing field, with a wide range of potential applications. From wearable sensors to bendable solar cells, curved displays, and curved focal plane arrays, the possibilities are endless. The criticality of flexible photodetectors for many of these applications is acknowledged, however, devices that are demonstrated thus far are limited in their spectral range. In this study, flexible photodetectors are demonstrated using a VO x nanoparticle ink, with an extremely broad operating wavelength range of 0.4 to 20 µm. This ink is synthesized using a simple and scalable wet‐chemical process. These photodetectors operate at room temperature and exhibit minimal variance in performance even when bent at angles of up to 100 ° at a bend radius of 6.4 mm. In addition, rigorous strain testing of 100 bend and release cycles revealed a photoresponse with a standard deviation of only 0.55%. This combination of mechanical flexibility, wide spectral response, and ease of fabrication makes these devices highly desirable for a wide range of applications, including low‐cost wearable sensors and hyperspectral imaging systems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

General Approach to Solving Spin Moiré Superstructures

Recently, a host of exciting magnetic textures such as topologically protected skyrmion lattices has been discovered in several bulk metallic lanthanide compounds. In addition to hosting skyrmion phases, a hallmark of this class of materials is the appearance of numerous spin textures characterized by superposition of multiple magnetic modulations: spin moiré superlattices. In order to understand the multitude of complex phases often present in these materials, we require a general-purpose experimental and theoretical framework. Here, we demonstrate such an approach in EuAg4⁢Sb2 by comprehensively characterizing and modeling its three complex zero-field magnetic textures. Systematic symmetry-breaking experiments using uniaxial strain determine that the ground-state incommensurate magnetic phase (ICM1) is single 𝑞, meaning the magnetic moments modulate along one magnetic propagation vector. In contrast, ICM2 and ICM3 are both double 𝑞, meaning they are formed from the superposition of two sinusoidal spin modulations, i.e., spin moiré superlattices. Further, through application of polarized small-angle neutron scattering and spherical neutron polarimetry, we demonstrate that ICM1 is a single-𝑞 cycloid and ICM2 and ICM3 are double-𝑞 vortex lattices. Despite the quasi-two-dimensional nature of EuAg4⁢Sb2, the modulations propagate out of the ab plane, leading to a shift of the spin texture between triangular lattice planes. Further, the ICM3 to ICM2 transition includes an unusual 45° rotation of the magnetic vortex lattice. Motivated by the coexistence of such drastically different phases in this compound, we conclude by developing a phenomenological model that sheds light on the energetic origins of these varied phases. Our experimental probes and theoretical modeling definitively characterize three different and tunable phases in one material and provide insight for the design of topological spin-texture materials.

Neves, Paul [Massachusetts Institute of Technology↗
DOE OSTI2021

Complexity of deformation mechanism in neutron-irradiated 304L austenitic stainless steel at microstructural scale

The deformation mechanisms of neutron-irradiated 304 L stainless steel have been investigated using the in-situ electron backscattered diffraction (EBSD) technique. To decipher the role of irradiation, a detailed analysis was performed on irradiated miniature samples and compared with nonirradiated samples. Furthermore, at three levels of engineering strain, —0.0%, 4.8%, and 14.5%—microstructural features as well as EBSD were recorded at the identical location during in-situ deformation testing. Post-mortem analysis of the EBSD data revealed that the neutron-irradiated samples had higher fractions of the slip bands even at low amounts of deformation. Along with the slip bands, the neutron-irradiated sample showed the twins and martensitic phase formed almost parallel to the slip bands. In addition, the image results also indicated that the formation of twins and phases associated with the slip bands. A detailed mechanistic understanding has been investigated to identify the (111)γ planes orientation with respect to the loading direction associated with the formation of twins and martensite. The newly formed deformation twins and martensite were also found to maintain this relationship when they existed together.

304L austenitic stainless steel↗
DOE OSTI2025

Single-crystalline orthorhombic GdAlGe as a rare-earth magnetic Dirac nodal-line metal

Crystal engineering is a method for discovering new quantum materials and phases, which may be achieved using external pressure or strain. Chemical pressure is unique in that it generates internal pressure perpetually to the lattice. As an example, GdAlSi from the rare-earth (𝑅) 𝑅⁢Al⁢𝑋 (𝑋=Si or Ge) family of Weyl semimetals is considered. Replacing Si with the larger isovalent element Ge creates sufficiently large chemical pressure to induce a structural transition from the tetragonal structure of GdAlSi, compatible with a Weyl semimetallic state, to an orthorhombic phase in GdAlGe, resulting in an inversion-symmetry-protected nodal-line metal. We find that GdAlGe hosts an antiferromagnetic ground state with two successive orderings, at 𝑇 N ⁢1=35K and 𝑇 N ⁢2=30K. In-plane isothermal magnetization shows a magnetic field induced metamagnetic transition at 6.2 T for 2 K. Furthermore, electron-hole compensation gives rise to a large magnetoresistance of ∼100% at 2 K and 14 T. Angle-resolved photoemission spectroscopy measurements and density functional theory calculations reveal a Dirac-like linear band dispersion over an exceptionally large energy range of ∼1.5eV with a high Fermi velocity of ∼10 6 m/s, a rare feature not observed in any magnetic topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Engineering of Exciton Spatial Distribution in CdS Nanoplatelets

Zinc-blende CdS nanoplatelets with atomically flat and very large {100} basal planes terminated solely by one type of element (either Cd or S atoms) are synthesized. Optical spectroscopy, X-ray diffraction, X-ray absorption, and transmission electron microscopy confirm that the surface structures of newly developed S-terminated CdS nanoplatelets are at least as well-defined as the original Cd-terminated nanoplatelets. Band gaps of the nanoplatelets are found to depend on not only the quantum-confined dimension (thickness) but also the nature of the surface termination. The facet structure dictates the packing of the ligands (carboxylate for Cd-terminated nanoplatelets and alkyl for S-terminated nanoplatelets), which causes a difference in the lattice strain and significantly affects the optical spectral width. Experimental and theoretical results reveal that engineering the exciton spatial distribution by the tailored synthesis of semiconductor nanocrystals with a precisely controlled surface structure is fully possible, which should open a new door for delivering the long-promised potential of semiconductor nanocrystals.

Cadmium sulfide↗
DOE OSTI2024

Quantum octets in high mobility pentagonal two-dimensional PdSe 2

Two-dimensional (2D) materials have drawn immense interests in scientific and technological communities, owing to their extraordinary properties and their tunability by gating, proximity, strain and external fields. For electronic applications, an ideal 2D material would have high mobility, air stability, sizable band gap, and be compatible with large scale synthesis. Here we demonstrate air stable field effect transistors using atomically thin few-layer PdSe 2 sheets that are sandwiched between hexagonal BN (hBN), with large saturation current > 350 μA/μm, and high field effect mobilities of ~ 700 and 10,000 cm 2 /Vs at 300 K and 2 K, respectively. At low temperatures, magnetotransport studies reveal unique octets in quantum oscillations that persist at all densities, arising from 2-fold spin and 4-fold valley degeneracies, which can be broken by in-plane and out-of-plane magnetic fields toward quantum Hall spin and orbital ferromagnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

IACMI Project 4.2: Thermoplastic Composite Development for Wind Turbine Blades

(Section 5.1) Composites made from Arkema’s Elium® thermoplastic resin and Johns Manville fiberglass were researched during this project for applications in wind blade manufacturing. A techno-economic model was developed to model this wind blade manufacturing process using these materials in place of traditional composites made with thermoset resin. This model was based on manufacturing a 61.5-meter wind blade, which showed a 4.7% reduction in wind blade cost as compared traditional thermoset materials. These cost savings were not from the thermoplastic material costing less than traditional thermoset materials, but rather from decreased capital costs, faster cycle times and reduced energy requirements and labor costs. (Section 5.2) An infusion and curing model was developed for thermoplastic composite wind blades using PAM-RTM. The primary goal was to demonstrate the infusion simulation for the Elium® resin system on a 13-meter wind blade. Additionally, the exotherm temperature was predicted and compared to measurements, which showed model results within 10% of actual measurements. (Section 5.3) Composite laminate panels and composite sandwich panels with a balsa core were produced; specimens were cut and characterized. Similar composite specimens were made with Elium® thermoplastic resin and Hexion thermoset epoxy (RIMR135/RIMH1366) to enable comparisons between these resin systems. The static test methods included: tensile, compression, in-plane shear, interlaminar shear, flexural, sandwich core shear flexure, and single cantilever beam tests for sandwich beams. Fatigue testing at room temperature was completed to composite laminate panels at a stress ratio of R=0.1 and R=10. In addition, fatigue testing to laminate panels was completed at -30°C, and at room temperature after conditioning specimens at 70°C and 90% relative humidity. Overall, mechanical test results from Elium® composites are similar to epoxy composites. (Section 5.4) Elium composite panels were produced with intentional defects such as voids and nonwetting of fibers to begin to understand performance sensitivity to defects. A thermal digital image correlation (TDIC) method provides high spatial resolution strain field at elevated temperatures and can be used to identify defective regions within composite panels. Flexural modulus differences of 21% were seen between defect and non-defect panels. Other Elium® composite panels were forced to be defective by boiling the resin after infusion, which created voids throughout the composite laminate. X-ray computed tomography scanning was used to view the internal structure of the defect panels. Defect panels had a significant reduction in fatigue life as compared to baseline panels produced without intentional defects. (Section 5.5) Lap shear specimens were fabricated to compare the lap shear strength of an off-the-shelf adhesive (Plexus MA590) and two new adhesives developed by Arkema (Bostik SAF30 90 and Bostik SAF30 120). ISO standard 4587:2003 was used to standardize the testing method and sample fabrication. Lap shear specimens were made at 1mm, 3mm, and 10mm thicknesses. The Bostik adhesive lap shear test results were similar to Plexus for all thicknesses. (Section 5.6) Fiber-reinforced polymer (FRP) composites are typically used in high-performance applications (e.g., aerospace), and their expansion into high-volume industries (e.g. consumer automotive and wind turbine blade manufacturer or similar) is hindered by their cost and a lack of efficient manufacturing techniques. Monitoring the curing process of these composites during manufacturing can improve the efficiency of the process, and therefore reduce the manufacturing cost. Cure monitoring techniques were developed that use probabilistic estimation methods and surface temperature measurements made using infrared cameras. These techniques enable real-time monitoring of the infusion process to locate manufacturing flaws, and they can, potentially, estimate residual stresses in the part. Their commercialization will help facilitate expansion of FRP composites in high-volume industries. (Section 5.7) A 13-meter composite wind blade was produced with Elium® resin and Johns Manville fiberglass; this blade was made with VARTM processing similar to how megawatt-scale wind blades are currently manufactured, but no post-mold heating was used for this thermoplastic composite blade. The wind blade underwent full-scale validation for static loading (4-different load orientations) and flapwise fatigue loading to simulate 20-years of operational loads. The thermoplastic composite wind blade withstood the loading without any noted issues and performed similar to results from a previous full-scale validation to an equivalent epoxy composite wind blade produced with the same blade molds. (Section 5.8) A study was conducted to determine the feasibility of recycling composite wind turbine blade components fabricated with glass fiber reinforced Elium® thermoplastic resin. Dissolution, which is a process unique to thermoplastic matrices, allows recovery of both the polymer matrix and full-length glass fibers, while maintaining their stiffness and strength throughout the recovery process. The economics of recycling is favorable if 50% of the glass fiber is recovered and resold for a process of $\$$ 0.28/kg, and 90% of the resin is recovered and resold at a price of $\$$ 2.50/kg.(Section 10) Recommendations are outlined for commercializing thermoplastic resin for composite wind blade production, in addition to recommended areas for future research.

17 WIND ENERGY↗
DOE OSTI2026

Observation of a Goldstone mode in the broken helix by time-resolved optical polarimetry

Magnets with isotropic easy-plane symmetry host Goldstone modes that can be leveraged for efficient spin transport. Here, we present a time-resolved optical polarimetry technique that allows us to detect and characterize such low-frequency modes, and use it to observe the Goldstone mode in the multi-Q broken helix phase of EuIn2As2. The strength of our technique comes from the ability to distinguish between nematic and magnetization dynamics in order to yield information about the mode structure, in addition to its frequency. We find that the nearly uniform spin precession characteristic of a Goldstone mode is realized only when a small magnetic field is used to unpin the broken helix from local strain generated during crystal growth. In this regime, the mode frequency scales linearly with the applied field due to the ground state C2z symmetry of the broken helix. Our work shows how optical polarimetry can be used to study the Goldstone modes of complex magnets.

Liebman-Peláez, A↗
DOE OSTI2023

Geomechanical in situ testing of fault reactivation in argillite repositories

Abstract. Pressurization of natural faults as a result of repository-induced effects can lead to their reactivation and permeability generation in case such features are present near disposal tunnels. Potential driving forces for such pressurization are the temperature increase caused by heat-producing high-level radioactive waste and the generation of hydrogen and other gases due to corrosion of engineered materials. We are primarily concerned about pressurization and fault activation in host rocks and faults that have very low natural permeability for pore pressure increases to dissipate, such as the argillite rocks currently investigated in Switzerland, France and other countries. This presentation discusses a series of in situ experiments of fault activation by fluid injection conducted in the argillite rock (Opalinus clay) at the Mont Terri underground research laboratory in Switzerland. A multi-model monitoring test bed was installed at Mont Terri that includes distributed fiber optics for strain, temperature, and acoustics; local fault pore pressure and three-dimensional displacement sensors; active seismic imaging; and passive seismic monitoring. The fault experiments (and their subsequent analysis via hydromechanical modeling) provide a new fundamental understanding of the coupling between pore pressure, fault deformation and permeability generation as a function of time and allow exploring how seismic and aseismic events may impact the integrity of faulted argillite host rock. Our experimental observations demonstrate that significant flow (and transport) can occur along the initially impermeable argillite fault when rupture is activated. However, the fault permeability decreases to almost its pre-activation value when fluid injection ceases and fluid pressure drops. Dilatant slip on the fault plane alone does not explain the observed increase in fault permeability; pressure-induced fault opening also plays a role, favored by the softness of the shale along with the fact that the structure of the fault zone prevents fluids from diffusing into the adjacent damage zone. Rupture initiation and permeability generation is initially aseismic, associated only with an increase in noise level and emerging tremors. Micro-earthquakes are initiated later in the experiments and typically occur away from the fluid-pressurized area. Hydromechanical models show that stress transferred from the initial aseismic deformation can build up to stress criticality and later induce seismic rupture. After presenting the experimental results, we will close the presentation with an outlook to future experimental campaigns using the fault test bed at Mont Terri. We are currently planning a controlled thermal stimulation of the fault, where instead of fluid injection as a trigger mechanism we will heat up the nearby rock volume and measure potential effects on fault stability. Lessons learned from our past and future experiments will help inform the safety assessment of geologic disposal in argillite host rock.

Birkholzer, Jens T.↗
DOE OSTI2022

Transitions in the morphology and critical stresses of gliding dislocations in multiprincipal element alloys

Refractory multiprincipal element alloys (MPEAs) are promising material candidates for high-temperature, high-strength applications. However, their deformation mechanisms, particularly at the dislocation scale, are unusual compared to those of conventional alloys, making it challenging to understand the origin of their high strength. Here, using an atomistically informed phase-field dislocation dynamics model, we study transitions in the morphology and critical stresses of long gliding screw dislocations over extended distances in a refractory MPEA. The model MPEA crystal accounts for the atomic-scale fluctuations in chemical composition across the glide planes via spatially correlated lattice energies and for the differences in glide resistances between screw and edge dislocations of unit length. Here, we show that the dislocation moves in a stop-start motion, alternating between wavy morphology in free flight and nearly recovered straight screw orientation in full arrest. The periods of wavy glide are due to variable kink-pair formation and migration rates along the length, where portions with higher rates glide more quickly. The critical stress to initiate motion corresponds to the stress required to form and migrate a kink pair at the weakest region along the length of the dislocation. Heterogeneity in lattice energy leads to variability in the local stress-strain response and to a strain hardening-like response, in which the critical stress to reactivate glide increases with glide distance. Statistical assessment of hundreds of realizations of dislocations indicates that the amount of hardening directly scales with the dispersion in underlying lattice energy.

3-dimensional systems↗
DOE OSTI2022

Effects of thin metal contacts on few-layer van der Waals ferrielectric CuInP 2 S 6

Out-of-plane polarized ferroelectric materials in a capacitive structure provide a key component for several technological applications. Furthermore, two-dimensional materials are expected to aid in the quest for both ultrathin and flexible electronics. Of the various two-dimensional ferroelectrics with out-of-plane polarization, CuInP 2 S 6 is special in that the Cu atoms are highly mobile and it has been shown to possess both low- and high-polarization states. Here, using density-functional-theory calculations, we explore the stabilization of the ferroelectric state for several prototypical metal contacts (Gr, Ni, Cu, Au, and Ag). In all cases, we find that the ferroelectric state can be stabilized at fewer layers than in the freestanding case. For all of the considered conventional metal contacts, we also find the existence of a quasi-ferroelectric state that stabilizes a polar phase for thicknesses greater than two layers of CIPS. In the cases of Au and Ag, interfacial alignment and strain can be used to stabilize ferroelectricity at the bilayer limit. Furthermore, we find that the strength of the interaction between the contact and CuInP 2 S 6 also leads to stabilization of the high-polarization state when ferroelectricity is stabilized. Lastly, energy-barrier calculations show that the system is still switchable in the presence of contact doping from the metal contacts.

2D materials↗
DOE OSTI2024

Scanning electrochemical probe microscopy investigation of two-dimensional materials

Research interests in two-dimensional (2D) materials have seen exponential growth owing to their unique and fascinating properties. The highly exposed lattice planes coupled with tunable electronic states of 2D materials have created manifold opportunities in the design of new platforms for energy conversion and sensing applications. Still, challenges in understanding the electrochemical (EC) characteristics of these materials arise from the complexity of both intrinsic and extrinsic heterogeneities that can obscure structure–activity correlations. Scanning EC probe microscopic investigations offer unique benefits in disclosing local EC reactivities at the nanoscale level that are otherwise inaccessible with macroscale methods. This review summarizes recent progress in applying techniques of scanning EC microscopy (SECM) and scanning EC cell microscopy (SECCM) to obtain distinctive insights into the fundamentals of 2D electrodes. We showcase the capabilities of EC microscopies in addressing the roles of defects, thickness, environments, strain, phase, stacking, and many other aspects in the heterogeneous electron transfer, ion transport, electrocatalysis, and photoelectrochemistry of representative 2D materials and their derivatives. Perspectives for the advantages, challenges, and future opportunities of scanning EC probe microscopy investigation of 2D structures are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Abrupt orthorhombic relaxation in compressively strained ultrathin SrRuO 3 films

Lattice structure can dictate electronic and magnetic properties of a material. Especially, reconstruction at a surface or heterointerface can create properties that are fundamentally different from those of the corresponding bulk material. In this work, we have investigated the lattice structure on the surface and in the thin films of epitaxial SrRuO 3 with the film thickness up to 22 pseudo-cubic unit cells (u.c.), using the combination of surface sensitive low energy electron diffraction and bulk sensitive scanning transmission electron microscopy. Our analysis indicates that, in contrast to many perovskite oxides, the RuO6 tilt and rotational distortions appear even in single unit cell SrRuO 3 thin films on cubic SrTiO 3 , while the full relaxation to the bulk-like orthorhombic structures takes 3-4 u.c. from the interface for thicker films. Yet the TiO 6 octahedra of the substrate near the interface with SrRuO 3 films show no sign of distortion, unlike those near the interface with CaRuO 3 films. Two orthogonal in-plane rotated structural domains are identified. These octahedral distortions are essential for the understanding of the thickness dependent transport and magnetism in ultrathin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Evaluation of Two-Dimensional to One-Dimensional Site Response for Idaho National Laboratory

We perform two-dimensional (2D) site response analyses accounting for spatial variability of soil properties and subsurface geometry of the Eastern Snake River Plane (ESRP), and quantify their effects on ground surface motion relative to one-dimensional (1D) site response analyses at the Idaho National Laboratory (INL). We first present the development of random field idealizations of the repeated basalt lava flows, heterogeneously inter-layered with sediments, from seismic velocity data collected over four decades in the ESRP. Using realizations of the stochastic fields mapped on 2D deterministic finite element models, we perform 2D viscoelastic and equivalent-linear wave propagation simulations, and quantify the mean and variance of site response aggravation factors, defined as the response spectral ratio of 2D to 1D analyses on the ground surface. Results are shown to be insensitive to the constitutive material behavior considered here, for strains induced by rock outcrop peak ground acceleration (PGA) as high as 0.7g: viscoelastic and equivalent-linear analyses predict peak mean 2D/1D aggravation factor 1.05 at period T=0.075 sec (i.e. the 2D response spectrum is 5% higher than the corresponding 1D at that period, on average), which corresponds to the wavelength of the horizontal correlation length of the random field (50m). For periods longer than the fundamental period of the site (here, T 1 =0.3125 sec), the propagating wavelengths are too long to be affected by the 1D site response and the aggravation factor becomes equal to 1. The standard deviation of the natural logarithms of the 2D/1D aggravation factors is ~0.15 for periods shorter than the fundamental period of the site, and decays thereafter at a steady rate.

58 GEOSCIENCES↗
DOE OSTI2025

Optomechanical Tuning of Second Harmonic Generation Anisotropy in Janus MoSSe/MoS 2 Heterostructures

Symmetry breaking in van der Waals materials enables the realization of quantum states and advanced device functionalities. Janus transition-metal dichalcogenides (TMDs) exhibit distinctive nonlinear optical properties due to their broken out-of-plane mirror symmetry. However, the dynamic control of second harmonic generation (SHG) anisotropy and resonance behavior via optical excitation remains elusive. Here, in this work, we investigate the SHG response of Janus MoSSe/MoS 2 heterostructures with 2H and 3R stackings. We can tune the SHG response by varying the incident photon wavelength from 800 to 1000 nm, which shows a resonance-dependent enhancement in intensity and a deviation from 6-fold symmetry, indicating wavelength-dependent anisotropy. The ratio between maximum and minimum intensity in the armchair directions, associated with the SHG anisotropy, reaches a value of 1.73 at the excitation wavelength of 1000 nm. Group theory analysis and first-principles calculations reveal that the observed anisotropy arises from optically induced strain. Our findings highlight the role of symmetry breaking and optical resonance contributing to the optomechanical tuning of SHG anisotropy, offering opportunities for developing Janus TMD-based photonic devices for frequency conversion, light generation, and optical switching.

Janus transition metal dichalcogenides↗
DOE OSTI2026

Small Molecule Inhibitor-Modulated Al 2 O 3 Atomic Layer Deposition on Monolayer MoS 2 for Controlled Nucleation

The integration of ultrathin dielectrics on two-dimensional (2D) semiconductors is essential for advancing beyond-Si electronics. However, the intrinsic inertness of van der Waals 2D basal planes remains a primary bottleneck to achieving uniform dielectric nucleation and growth. Here, in this study, we introduce a small molecule inhibitor (SMI)-modulated thermal atomic layer deposition (ALD) strategy, exemplified by aluminum oxide (Al 2 O 3 ) ALD on monolayer molybdenum disulfide (1L MoS 2 ) with acetic acid (HAc) SMI. The ABC-type sequence comprises HAc inhibitor (A), trimethylaluminum (TMA) precursor (B), and deionized H 2 O coreactant (C). In situ quartz crystal microbalance (QCM) studies reveal robust HAc adsorption on Al 2 O 3 and suppression of subsequent oxide growth on HAc-passivated surfaces. When applied to 1L MoS 2 , this inhibitory pathway enables HAc to selectively passivate nascent Al 2 O 3 nuclei formed on the MoS 2 surface, limiting their three-dimensional (3D) island coarsening and redirecting precursor adsorption toward the uncovered basal plane. Consequently, nearly continuous ultrathin (∼1.5 nm) Al 2 O 3 films are achieved on 1L MoS 2 with markedly improved uniformity compared to standard Al 2 O 3 ALD using TMA and H 2 O, as validated by atomic force microscopy (AFM), cross-sectional scanning transmission electron microscopy (STEM), and energy-dispersive X-ray spectroscopy (EDS). Density functional theory (DFT) calculations further provide atomistic insight into HAc-modulated Al 2 O 3 nucleation, corroborating the energetic preference of HAc for Al 2 O 3 over MoS 2 and attenuated TMA adsorption on HAc-passivated surfaces. Spatially resolved Raman spectroscopy also confirms that the HAc-modulated process preserves the structural integrity of 1L MoS 2 , with only minimal strain and doping perturbations observed after dielectric deposition. This SMI-modulated approach offers a broadly applicable framework for controlling ALD nucleation across various inhibitors, ALD chemistries, and 2D materials, opening opportunities for reliable dielectric integration in next-generation nanoelectronics.

36 MATERIALS SCIENCE↗