Search NASA⌕ Search

SEARCH · Search NASA

Results for “preforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

The Microstructure and Hardness of Hot Dip Galvanized Steel During Wire Drawing

The steel wire samples are hot-dip-galvanized. The zinc coating is preformed using the standard method. To recognize the behavior of the zinc coated steel wire during the submission to deformation, the wire samples are drawn on a machine designed for this aim and then investigated. In this research is represented the phase structure of the zinc coated samples. Afterwards the thickness of the layer and the hardness of the hot-dip galvanized steel depending on the drawing is represented.

36 MATERIALS SCIENCE↗

STUDY OF AGING EFFECTS IN 2205 DUPLEX STAINLESS STEEL USING THERMOELECTRIC POWER MEASUREMENT

Thermoelectric power (TEP) measurements have been used as an effective method for evaluating the metallurgical state of various alloys. In the steel industry, some fabrication processes promote phase transformation and second phase precipitations which affect the material properties. Assessment of mechanical properties is critical in order to ensure quality of components. This work was conducted in order to evaluate the influence of the aging state of 2205 duplex stainless steel on TEP values. Commercial 2205 duplex steel was isothermally aged at 650 deg. C 700 deg. C and 900 deg. C at different aging times. TEP measurement technique was applied as a non destructive assessment technique to characterize the aging kinetics of the aged 2205 duplex stainless steel, hardness Rockwell (RC) and Charpy impact test were preformed to observe the effect of aging time on the specimens. Metallographic analysis was used to monitor phase transformation and sigma phase precipitation caused by the spinodal decomposition process of ferrite into secondary austenite and sigma phase. Results indicate that that the TEP is sensitive to gradual microstructural changes produced by the aging treatments.

36 MATERIALS SCIENCE↗

Numerical Modeling of Heat Transfer and Flow in Low Power Arcjet Thruster

Modeling studies are preformed to investigate the plasma and heat transfer characteristics of a low power argon arcjet thruster. Computed temperature, velocity, static pressure, and Mach number distribution in arcjet thruster under typical operating condition are presented in this paper. It shows that the performance data from numerical modeling results are basically consistent with the experimental measured values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

4{omega} Thomson scattering probe for high-density plasma characterization at Titan

In preparation for the upcoming experiments on the Titan laser at the Jupiter Laser Facility, a new Thomson scattering system has been designed and implemented. This system allows electron temperature and density measurements in a high-density regime (n{sub e}>10{sup 21} cm{sup -3}). A 263 nm probe has been demonstrated to produce a total energy of 15 J at 4{omega}(263 nm) in a 1 ns square pulse with a focal spot size of 100 {mu}m. This probe has been used for imaging Thomson scattering of the ion feature. The goal of this study is to investigate the heating of a preformed plasma by a short-pulse heater beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interaction of high contrast laser pulse with foam-attached target

Interactions of high contrast laser pulses with foam-attached targets are investigated via particle-in-cell simulations in order to enhance the energy coupling from laser to plasmas. A foam layer whose mass density is much lower than that of the solid state is used for controlling the plasma density distribution of the laser irradiation region with the aid of the high contrast laser pulses, which are by contrast with the expanding profile of preformed plasmas which are inevitably generated by the irradiation of the low contrast laser pulses. The ionization process plays a role in the laser and foam interaction, which results in the formation of periodic structure of ion charge density. The bulk electrons inside the foam layer are heated by the laser pulse, which results in the generation of abundant MeV electrons and higher energy coupling from laser to plasma. These features are utilized for laser ion acceleration by using a foam-attached thin foil target. It is shown that the laser accelerated ion energy is enhanced by properly choosing the foam parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stark Profiles In Plasmas Interacting With A Strong Oscillatory Quasi-Monochromatic Electric Field

This paper presents an advanced analysis of the spectroscopic signatures of the interaction of a strong oscillating Quasi-monochromatic Electric Field (QEF), generated by a high-power short-pulse laser, with a preformed laser-produced plasma. The computation of a synthetic spectrum emitted by such plasmas requires the calculation of the Stark line shape in the presence of a QEF and the evaluation of the QEF intensity profile throughout the line of sight in the plasma. As for the Stark profiles in hot dense plasmas submitted to a strong QEF, they are calculated using the so-called Floquet-Liouville formalism. In this formalism, the Liouville space, usually used for the calculation of Stark profiles in dense plasmas, and the Floquet theory, developed to solve time-periodic problems, have been joined together to solve the time-dependent Liouville equation. A second kind of simulations involving Particle-In-Cell PIC kinetic simulations is required for the calculation of the QEF inhomogeneous intensity and the exotic features exhibited in the spectroscopic diagnostic. The global synthetic profile is obtained integrating all individual contributions for every time and location in the plasma. Finally, a spectroscopic analysis of the experimental Al He {beta} line is performed using the tools presented in this work. The spectroscopic signatures of the QEF show up as prominent satellites, non symmetrical with respect to the unperturbed line and distinguishable from the di-electronic satellites.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acceleration of Electrons in Modulated Plasma Channels with Radially Polarized Laser Pulses

Two highly versatile experimental techniques are demonstrated for making preformed plasma waveguides with periodic structure capable of supporting the propagation of ultra-intense femtosecond laser pulses. These waveguides were made in hydrogen, nitrogen and argon plasmas with a length of 15 mm and modulation period as short as 35 {mu}m. Simulations show that these guides allow direct laser acceleration of electrons, achieving gradients of 80 MV/cm and 10 MV/cm for laser pulse powers of 1.9 TW and 30 GW, respectively. We also demonstrate a technique for making the required radially polarized pulses.

43 PARTICLE ACCELERATORS↗

Finite Element Modeling of a Non-Isothermal Superplastic-Like Forming Process

Conventional superplastic forming (SPF) has been modified to increase the productivity and reduce some of the drawbacks, such as high forming temperature and high percentage thinning, to suit the automotive industries. One of the modifications was to combine between the conventional SPF and the use of a mechanical preformed blank to form the non-superplastic grade aluminum alloy (AA5083-O). The requirement of high temperature usually results in microstructural defects during forming process. In this paper, finite element modeling was adopted to investigate the superplastic-like forming process using the non-isothermal heating system. In the simulation, two phases (mechanical pre-forming and gas blow for ming) of the process were conducted under different temperatures, where the material was mechanically drawn into the die cavity at 200 deg. C in the first phase, and it formed with gas pressure applied at a global temperature increasing from 400 deg. C to 500 deg. C. Because of the non-isothermal heating of material, it was found that it had enough ductility to flow more easily in the specific zones (die corners and radius). Additionally, FEM results showed that a better formed part can be obtained by the increasing temperature forming, compared to the stable temperature phase.

36 MATERIALS SCIENCE↗

Simulation of Forming and Wrinkling of Textile Composite Reinforcements

Because of the very weak textile bending stiffness, wrinkles are frequent during composite reinforcement forming. The simulation of the shape of these wrinkles during the forming process permits to verify there is no wrinkle in the useful part of the preform. In this paper the role of tensions, in-plane shear and bending rigidities in wrinkling development are analyzed. In-plane shear plays a main role for onset of wrinkles in double-curved shape forming but wrinkling is a global phenomenon depending on all strains and stiffnesses and on boundary conditions. The bending stiffness mainly determines the shape of the wrinkles and a membrane approach it is not sufficient to simulate wrinkles.

36 MATERIALS SCIENCE↗

Wakefield effects and solitary waves of an intense short laser pulse propagation in a plasma channel

In the presence of relativistic and channel-coupling nonlinearity and wakefield effects, the propagation characteristics and solitary waves of an intense short laser pulse in a preformed plasma channel are investigated. The evolution equation of the laser spot size is derived by using variational technique, the initial laser and plasma parameters for propagation with constant spot size, periodic defocusing and focusing oscillations, and solitary waves are identified. For illustration, some numerical results are also presented. It is found that the laser focusing is enhanced by the wakefield effects that result in a significant reduced focusing power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Properties of a capillary discharge-produced argon plasma waveguide for shorter wavelength source application

We report the operation of a discharge-produced argon (Ar) plasma waveguide in an alumina (Al{sub 2}O{sub 3}) capillary to guide a 10{sup 16}-W/cm{sup 2} ultrashort laser pulse for shorter wavelength light sources at high repetition rate operation. The electron density in the plasma channel was measured to be 1 x 10{sup 18} cm{sup -3}. Modeling with a one-dimensional magnetrohydrodynamic code was used to evaluate the degree of ionization of Ar in the preformed plasma channel. The observed spectrum of the laser pulse after propagation in the argon plasma waveguide was not modified and was well reproduced by a particle in cell simulation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An initial assessment of three-dimensional polar direct drive capsule asymmetries for implosions at the National Ignition Facility

The National Ignition Facility (NIF) provides a unique opportunity to study implosion physics with nuclear yield. The use of polar direct drive (PDD) [A. M. Cok, R. S. Craxton, and P. W. McKenty, Phys. Plasmas 15, 082705 (2008)] provides a simple platform for the experimental studies without expensive optics upgrades to NIF. To determine the optimum PDD laser pointing geometry on NIF and provide a baseline for validating inertial confinement fusion codes against experiments for symmetric and asymmetric implosions, computer simulations using the 3D radiation-hydrodynamics code hydra[M. M. Marinak, R. E. Tipton, O. L. Landen, T. J. Murphy, P. Amendt, S. W. Haan, S. P. Hatchett, C. J. Keane, R. McEachern, and R. Wallace, Phys. Plasmas 3, 2070 (1996)] were preformed. The upper hemisphere of a DT-filled CH capsule was imploded by 96 NIF beams in a PDD configuration. Asymmetries in both polar and equatorial directions around the capsule were observed, with the former dominating the latter. Analysis of the simulation results indicates that the lack of symmetry in the initial power density profile (during the first 200 ps of the implosion) is a primary cause of late-time asymmetry in the implosion as well as decreased yield. By adjusting the laser pointings, the symmetry and total neutron yield were improved. Simulations with dropped quads (four of the NIF laser system's 192 beamlines) without repointing worsen the overall symmetry by a factor of 10 (with respect to rms radial variation around the capsule) and reduce neutron yield by a factor of 2. Both of these degraded implosion characteristics are restored by azimuthal repointing of the remaining quads.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasi-matched propagation of ultra-short, intense laser pulses in plasma channels

The propagation of an ultrashort and relativistically intense laser pulse in a preformed plasma channel is investigated. The nonlinear paraxial wave equation describing the laser propagation in the plasma is solved both analytically and numerically. For any arbitrary temporal laser pulse profile with a given power (less then the critical power for self-focusing) and any prescribed transverse density profile in the channel, we determine the laser intensity distribution along the pulse ensuring quasi-matched propagation, neglecting non-paraxial effects. For the case of a Gaussian laser with an initially uniform spot throughout the pulse, we determine the optimal channel depth that minimizes laser evolution (e.g., minimizes spot size oscillations). The analytical and semi-analytical results obtained for both cases in the weakly relativistic regime are presented and validated through comparison with numerical simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Programmably structured plasma waveguide for development of table-top photon and particle sources

Programmable fabrication of longitudinal spatial structures in an optically preformed plasma waveguide in a gas jet was achieved, by using laser machining with a liquid-crystal spatial light modulator as the pattern mask. Fabrication of periodic structures with a minimal period of 200 {mu}m and density-ramp structures with a minimal slope length of 100 {mu}m was attained. The technique is useful for the optimization of various laser-plasma-based photon and particle sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Self-proton/ion radiography of laser-produced proton/ion beam from thin foil targets

Protons and multicharged ions generated from high-intensity laser interactions with thin foil targets have been studied with a 100 TW laser system. Protons/ions with energies up to 10 MeV are accelerated either from the front or the rear surface of the target material. We have observed for the first time that the protons/ions accelerated from the front surface of the target, in a direction opposite to the laser propagation direction, are turned around and pulled back to the rear surface, in the laser propagation direction. This proton/ion beam is able to create a self-radiograph of the target and glass stalk holding the target itself recorded through the radiochromic film stack. This unique result indicates strong long-living (ns time scale) magnetic fields present in the laser-produced plasma, which are extremely important in energy transport during the intense laser irradiation. The magnetic field from laser main pulse expands rapidly in the preformed plasma to rotate the laser produced protons. Radiation hydrodynamic simulations and ray tracing found that the magnetic field created by the amplified spontaneous emission prepulse is not sufficient to explain the particle trajectories, but the additional field created by the main pulse interaction estimated from particle-in-cell simulation is able to change the particle trajectories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ablation driven by hot electrons generated during the ignitor laser pulse in shock ignition

An analytical model for the ablation driven by hot electrons is presented. The hot electrons are assumed to be generated during the high intensity laser spike used to produce the ignitor shock wave in the shock ignition driven inertial fusion concept, and to carry on the absorbed laser energy in its totality. Efficient energy coupling requires to keep the critical surface sufficiently close to the ablation front and this goal can be achieved for high laser intensities provided that the laser wavelength is short enough. Scaling laws for the ablation pressure and the other relevant magnitudes of the ablation cloud are found in terms of the laser and target parameters. The effect of the preformed plasma assembled by the compression pulse, previous to the ignitor, is also discussed. It is found that a minimum ratio between the compression and the ignitor pulses would be necessary for the adequate matching of the corresponding scale lengths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatiotemporal evolution of ponderomotive electron heating in axially inhomogeneous collisionless plasma

We investigate the spatiotemporal focusing dynamics of a Gaussian laser pulse in preformed collisionless plasma subjected to an axial nonuniformity in the plasma density. In order to follow up the pulse dynamics, a nonlinear Schrödinger wave equation characterizing the beam spot size in space and time frame has been derived and solved numerically to investigate the propagation characteristics as the pulse advances in the plasma. The effect of inhomogeneity on focusing length and ponderomotive electron heating have been analyzed and illustrated graphically. It is seen that ponderomotive heating is quite sensitive to the inhomogeneity parameters and the energy gain by electrons can be optimized by suitable choice of parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser pulse propagation in inhomogeneous magnetoplasma channels and wakefield acceleration

Wakefield excitation in a preformed inhomogeneous parabolic plasma channel by an intense relativistic (≃10{sup 19} W/cm{sup 2}) circularly polarized Gaussian laser pulse is investigated analytically and numerically in the presence of an external longitudinal magnetic field. A three dimensional envelope equation for the evolution of the laser pulse is derived, which includes the effect of the nonparaxial and applied external magnetic field. A relation for the channel radius with the laser spot size is derived and examines numerically to see the external magnetic field effect. It is observed that the channel radius depends on the applied external magnetic field. An analytical expression for the wakefield is derived and validated with the help of a two dimensional particle in cell (2D PIC) simulation code. It is shown that the electromagnetic nature of the wakes in an inhomogeneous plasma channel makes their excitation nonlocal, which results in change of fields with time and external magnetic field due to phase mixing of the plasma oscillations with spatially varying frequencies. The magnetic field effect on perturbation of the plasma density and decreasing length is also analyzed numerically. In addition, it has been shown that the electron energy gain in the inhomogeneous parabolic magnetoplasma channel can be increased significantly compared with the homogeneous plasma channel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗