Search NASA⌕ Search

SEARCH · Search NASA

Results for “process analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Determination of thorium and uranium in solution by laser-induced breakdown spectrometry

Laser-induced breakdown spectrometry (LIBS) has been successfully developed to quantify thorium (Th) and uranium (U) in solution using membrane-based filter paper as a sample support. The filter paper is easy to handle and the entire analysis process takes only a few minutes for each sample. The developed method provides a practical approach for fast and sensitive determination of actinides in aqueous solutions using LIBS. We obtained calibration curves for U and Th individually as well as as a mixture. We observed that the quantification of trace levels of U in a bulk amount of Th was not possible because of strong spectral interference from Th at the most intense lines of U, but traces of Th in a bulk amount of U could be determined. The concentrations of U and Th in unknown solutions were determined by use of LIBS, and these results agreed to within 4% and 2%, respectively, with the expected values. The limits of detection for Th and U were calculated from the experimental data and were in the range of a few parts per million by weight to a few tens of parts per million by weight.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of microwave-enhanced spark-induced breakdown spectroscopy

We propose microwave-enhanced spark-induced breakdown spectroscopy with the same measurement and analysis processes as in laser-induced breakdown spectroscopy, but with a different plasma generation mechanism. The size and lifetime of the plasma generated can contribute to increased measurement accuracy and expand its applicability to industrial measurement, such as an exhaust gas analyzer for automobile engine development and its regulation, which has been hard to operate by laser at an engineering evaluation site. The use of microwaves in this application helps lower the cost, reduce the system size, and increase the ease of operation to make it commercially viable. A microwave frequency of 2.45 GHz was used to enhance the volume and lifetime of the plasma at atmospheric condition even at elevated pressure.

74 ATOMIC AND MOLECULAR PHYSICS↗

Amplitude versus phase effects in extreme ultraviolet lithography mask scattering and imaging

It is well established that extreme ultraviolet (EUV) mask multilayer roughness leads to wafer-plane linewidth roughness (LWR) in the lithography process. Analysis and modeling done to date has assumed, however, that the roughness leading to scatter is primarily a phase effect and that the amplitude can be ignored. Under this assumption, simple scattering measurements can be used to characterize the statistical properties of the mask roughness. Here, we explore the implications of this simplifying assumption by modeling the imaging impacts of the roughness amplitude component as a function of the balance between amplitude and phase induced scatter. In addition to model-based analysis, we also use an EUV microscope to compare experimental through focus data to modeling in order to assess the actual amount of amplitude roughness on a typical EUV multilayer mask. The results indicate that amplitude roughness accounts for less than 1% of the total scatter for typical EUV masks.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of a Raman Spectroscopy Technique to Detect Alternate Transportation Fuel Hydrocarbon Intermediates in Complex Combustion Environments

Spontaneous Raman spectra for important hydrocarbon fuels and combustion intermediates were recorded over a range of low-to-moderate flame temperatures using the multiscalar measurement facility located at Sandia/CA. Recorded spectra were extrapolated to higher flame temperatures and then converted into empirical spectral libraries that can readily be incorporated into existing post-processing analysis models that account for crosstalk from overlapping hydrocarbon channel signal. Performance testing of the developed libraries and reduction methods was conducted through an examination of results from well-characterized laminar reference flames, and was found to provide good agreement. The diagnostic development allows for temporally and spatially resolved flame measurements of speciated hydrocarbon concentrations whose parent is more chemically complex than methane. Such data are needed to validate increasingly complex flame simulations.

Ekoto, Isaac W.↗

Light Water Reactor Sustainability Program: Technical Basis Guide Describing How to Perform Safety Margin Configuration Risk Management

The INL has carried out a demonstration of the RISMC approach for the purpose of configuration risk management. We have shown how improved accuracy and realism can be achieved by simulating changes in risk – as a function of different configurations – in order to determine safety margins as the plant is modified. We described the various technical issues that play a role in these configuration-based calculations with the intent that future applications can take advantage of the analysis benefits while avoiding some of the technical pitfalls that are found for these types of calculations. Specific recommendations have been provided on a variety of topics aimed at improving the safety margin analysis and strengthening the technical basis behind the analysis process.

97 MATHEMATICS AND COMPUTING↗

EP-DRAFT-1.1 2014-01-19 OSI-GAM-SOP-00x In Situ High-resolution Gamma Spectroscopy

The standard operating procedure is described for in situ high-resolution gamma spectroscopy, including operational readiness, planning, preparation, conduct, and reporting. Data analysis of in situ gamma spectrum files will be performed together with those of other gamma assay methods by a dedicated Data Analysis process, documented in companion OSI procedures.

07 ISOTOPE AND RADIATION SOURCES↗

Waste Characterization with WDAS and the Add-a-Source Method [Slides]

Why Neutron Counting? • Gamma rays can be attenuated making large items that include high Z material or nonuniformities problematic. • Neutrons are highly penetrating: — Low rate of interaction with matter — Can measure entire volume of item — Can measure large volume items — Reduces sampling errors • 3He neutron detectors are insensitive to interference by other gamma-emitting radionuclides. • Neutron Count Data can be obtained relatively rapidly. • Neutron rates are related to the amount of fissionable material. (Pu, U, etc. – what we need to safeguard). • The amount of fissionable material is related to the α-decay rate (often a key quantity for waste measurements). • Isotopic information is needed to determine total nuclear material mass (gamma-ray assay, destructive analysis, process knowledge).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Towards Exascale: High Performance Visualization and Analytics – Project Status Report

The LBNL Visualization research program focuses on a key set of problems facing our community as we move towards the exascale regime of computing. First, we aim to better understand how to effectively take advantage of an evolving architectural landscape where there are an increasing number of cores per processor by examining algorithmic reformulation and alternative methods of programming these increasingly complex platforms. Second, as the gap widens between computational and I/O capacity, it is increasingly imperative to perform more visual data exploration and analysis operations concurrent with the simulation to avoid increasingly expensive I/O. Our approach is to examine several interrelated issues aimed at minimizing the memory footprint, data movement, and design/implementation issues related to deploying tools that can have broad applicability across many different simulation codes and science domains. Third, increasing computational power produces larger and more complex scientific data, and our research program focuses on new technologies aimed at enabling scientific data understanding with ever-larger data. Here, we explore how multi-resolution data representation techniques can reduce data movement, and study novel approaches that focus visualization and analysis processing on subsets of data that are “scientifically interesting,” thereby also minimizing data movement while accelerating scientific knowledge discovery.

97 MATHEMATICS AND COMPUTING↗

Data And Informatics Working Group On Virtual Data Integration Workshop Report

This report is the outcome of a workshop that was commissioned by the Department of Energy’s Climate and Environmental Sciences Division (CESD) to examine current and future data infrastructure requirements that would be foundational to achieving CESD’s scientific mission goals. Over the past several years, data volumes in CESD disciplines have risen sharply to unprecedented levels (tens of petabytes). So too has the complexity and diversity of the research data (simulation, observation, and reanalysis) needing to be captured, stored, verified, analyzed, and integrated. With the trends of increased data volume (in the hundreds of petabytes), more complex analysis processes, and growing crossdisciplinary collaborations, it is timely to investigate whether the CESD community has the right computational and data support to realize the full scientific potential from its data collections. In recognition of the challenges, a partnership is forming across CESD and with national and international agencies to investigate the viability of creating an integrated, collaborative data infrastructure: a virtual laboratory. The overarching goal of this report is to identify the community’s key data technology requirements and high-priority development needs for sustaining and growing their scientific discovery potential. The report also aims to map these requirements to existing solutions and to identify gaps in current services, tools, and infrastructure that will need to be addressed in the short, medium, and long term so as not to impede scientific progress

54 ENVIRONMENTAL SCIENCES↗

Microgrid Design Analysis Using Technology Management Optimization and the Performance Reliability Model

Microgrids are a focus of localized energy production that support resiliency, security, local con- trol, and increased access to renewable resources (among other potential benefits). The Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) Joint Capa- bility Technology Demonstration (JCTD) program between the Department of Defense (DOD), Department of Energy (DOE), and Department of Homeland Security (DHS) resulted in the pre- liminary design and deployment of three microgrids at military installations. This paper is focused on the analysis process and supporting software used to determine optimal designs for energy surety microgrids (ESMs) in the SPIDERS project. There are two key pieces of software, an ex- isting software application developed by Sandia National Laboratories (SNL) called Technology Management Optimization (TMO) and a new simulation developed for SPIDERS called the per- formance reliability model (PRM). TMO is a decision support tool that performs multi-objective optimization over a mixed discrete/continuous search space for which the performance measures are unrestricted in form. The PRM is able to statistically quantify the performance and reliability of a microgrid operating in islanded mode (disconnected from any utility power source). Together, these two software applications were used as part of the ESM process to generate the preliminary designs presented by SNL-led DOE team to the DOD. Acknowledgements Sandia National Laboratories and the SPIDERS technical team would like to acknowledge the following for help in the project: * Mike Hightower, who has been the key driving force for Energy Surety Microgrids * Juan Torres and Abbas Akhil, who developed the concept of microgrids for military instal- lations * Merrill Smith, U.S. Department of Energy SPIDERS Program Manager * Ross Roley and Rich Trundy from U.S. Pacific Command * Bill Waugaman and Bill Beary from U.S. Northern Command * Tarek Abdallah, Melanie Johnson, and Harold Sanborn of the U.S. Army Corps of Engineers Construction Engineering Research Laboratory * Colleagues from Sandia National Laboratories (SNL) for their reviews, suggestions, and participation in the work.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Working Group on Virtual Data Integration

This report is the outcome of a workshop commissioned by the U.S. Department of Energy’s (DOE) Climate and Environmental Sciences Division (CESD) to examine current and future data infrastructure requirements foundational for achieving CESD scientific mission goals in advancing a robust, predictive understanding of Earth’s climate and environmental systems. Over the past several years, data volumes in CESD disciplines have risen sharply to unprecedented levels (tens of petabytes). Moreover, the complexity and diversity of this research data— including simulations, observations, and reanalysis— have grown significantly, posing new challenges for data capture, storage, verification, analysis, and integration. With the trends of increased data volume (in the hundreds of petabytes), more complex analysis processes, and growing cross-disciplinary collaborations, it is timely to investigate whether the CESD community has the computational and data support needed to fully realize the scientific potential of its data collections. In recognition of the challenges, a partnership is forming across CESD and among national and international agencies to examine the viability of creating an integrated, collaborative data infrastructure: a Virtual Laboratory. The overarching goal of this report is to identify the community’s key data technology requirements and high-priority development needs for sustaining and growing its scientific discovery potential. The report also aims to map these requirements to existing solutions and to identify gaps in current services, tools, and infrastructure that will need to be addressed in the short, medium, and long term to advance scientific progress.

54 ENVIRONMENTAL SCIENCES↗

Trends in Nuclear Explosion Monitoring Research & Development - A Physics Perspective

This document entitled “Trends in Nuclear Explosion Monitoring Research and Development – A Physics Perspective” reviews the accessible literature, as it relates to nuclear explosion monitoring and the Comprehensive Nuclear-Test-Ban Treaty (CTBT, 1996), for four research areas: source physics (understanding signal generation), signal propagation (accounting for changes through physical media), sensors (recording the signals), and signal analysis (processing the signal). Over 40 trends are addressed, such as moving from 1D to 3D earth models, from pick-based seismic event processing to full waveform processing, and from separate treatment of mechanical waves in different media to combined analyses. Highlighted in the document for each trend are the value and benefit to the monitoring mission, key papers that advanced the science, and promising research and development for the future.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diffraction Contrast Tomography: A Novel 3D Polycrystalline Grain Imaging Technique

Diffraction contrast tomography (DCT) is a non-destructive way of imaging microstructures of polycrystalline materials such as metals or crystalline organics. It is a useful technique to map 3D grain structures as well as providing crystallographic information such as crystal orientation, grain shape, and strain. Understanding the internal microstructure of a material is important in understanding the bulk material properties. This report gives a general overview of the similar techniques, DCT data acquisition, and analysis processes. Following the short literature review, potential work and research at Los Alamos National Laboratory (LANL) is discussed.

36 MATERIALS SCIENCE↗

Exploratory study on potential safeguards applications for shared ledger technology

The International Atomic Energy Agency (IAEA) is responsible for providing credible assurance that countries are meeting their obligations not to divert or misuse nuclear materials and facilities for non-peaceful purposes. To this end, the IAEA integrates information about States’ nuclear material inventories and transactions with other types of data to draw its safeguards conclusions. As the amount and variety of data and information has increased, the IAEA’s data acquisition, management, and analysis processes have greatly benefited from advancements in computer science, data management, and cybersecurity during the last 20 years. Despite these advancements, inconsistent use of advanced computer technologies as well as political concerns among certain IAEA Member States centered on trust, transparency, and IAEA authorities limit the overall effectiveness and efficiency of IAEA safeguards. As a result, there is an ongoing need to strengthen the effectiveness and efficiency of IAEA safeguards while improving Member State cooperation and trust in the safeguards system. These chronic safeguards needs could be met with some emerging technologies, specifically those associated with the digital currency bitcoin.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Advanced Ultrasupercritical (AUSC) Materials Thick-Walled Cycling Header Development for ComTest-AUSC (Final Report)

Alstom Power Inc., a wholly owned subsidiary of the General Electric Company (GE) recently completed “Advanced Ultrasupercritical (AUSC) Materials Thick-Walled Cycling Header Development for ComTest-AUSC” under Award No. DE-FE0026183 for the U.S. Department of Energy National Energy Technology Laboratory (DOE NETL). This project developed a design for testing of a high temperature nickel-based superalloy thick-walled header to simulate cycling and flexible plant operation in new and existing plants. The objective was to simulate the expected thermal stresses of a new AUSC plant or a retrofit header in an existing plant to improve flexible dynamic operation while maintaining component integrity and overall power plant reliability. The high performance superalloy materials that enable higher operating temperatures and pressures can support future transformational power technologies including new AUSC plants at 4250-5000 psi, 730°C/760°C or will serve as a replacement component in a repowered or retrofit USC coal powered cycling plant at 3600 psi, 600°C. These alloys can also enable supercritical CO2 cycles, nuclear power, solar power and more efficient natural gas combined cycle units as targeted by the U.S. DOE/NETL Cross-Cutting Research Technology Program Plan. Recently developed advanced nickel alloys such as Inconel 740H (740H) and Haynes 282 (H282) have been successfully tested on a pilot scale for fireside corrosion using steam loop tubing at AUSC temperatures of 760°C in actual operating coal fired boiler. These high strength materials have been demonstrated their adequacy for use in other high temperature boiler components such as superheater tubes. Thick-walled superheater outlet headers which operate at high temperatures and pressure under severe cycling condition are considered as one of the most critical component in the AUSC coal fired boiler. Over the design life of a plant, these headers are exposed to the most severe fatigue and creep damage accumulation and need to be properly designed for the expected cycling in an AUSC plant with flexible operation. These materials need to demonstrate adequate design life of 20 to 30 years for creep and fatigue conditions. The following tasks were performed: 1. A conceptual design was developed of a thick-walled component representative of typical headers with several tube connections and proper flow rates (~100,000 lbs/hr) suitable for Phase II test at 760°C operation. This was based on a process analysis of expected full scale new and component retrofit designs for AUSC; 2. A multi-physics flow and heat transfer computational fluid dynamics (CFD) analysis of the component for proper layout of the header configuration, number and geometry (size) of tubes required for bypass flow, flow rates through the tubing, and sectional pressure drops was performed. Steam to header metal heat transfer film coefficients in the header section and the tubes during the two stages (half load and full load) of the cycling operation were evaluated and used in the stress analysis; 3. Detailed analytical evaluation of the thick-walled pipe and tube connections for mechanical integrity under cycling conditions was performed. This included transient thermal stress analysis and fatigue usage estimation including the tube-to-pipe weld geometries and weld materials; 4. A layout and design of the thick-walled test component was developed and instrumentation required for a test was identified; 5. Continuum Damage Mechanics (CDM) creep prediction models were extended to 740H and H282 and validated with public data on 740H and H282 for use in creep analysis. In addition, detailed creep analyses were performed separately for the design life of the conceptual AUSC superheater outlet header using these General Electric (GE) creep constitutive models. GE was the prime contractor for the project, which was directed by Principal Investigator Robert Schrecengost and Lead Scientist Dr. B. Reddy Ganta. Other collaborative participants in this project included GE Global Research, GE Boiler Engineering, and a Technical Consultant from EPRI.

01 COAL, LIGNITE, AND PEAT↗

ES&H Center Causal Analysis Assessment

In July 2017, the Organization 630 senior manager requested that an assessment of selected causal analyses be performed for the period from July 2014 to July 2017. As a result, this assessment reviewed causal analyses performed by or for Environment, Safety and Health (ES&H) Center department personnel during the specified period. The purpose was to determine the degree to which ES&H Center personnel learn from use of the causal analysis process.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Lessons from Past Nuclear Disarmament: What Worked What Did Not

This report studies the efforts of the international community and the United States to verif)/ the denuclearization of various countries: Ukraine, South Africa, Iraq, Taiwan, and Libya. In doing so, it considers the verification of nuclear warhead destruction and the accounting of nuclear materials. Each case study contributes to the understanding we have of which verification procedures worked and which did not and what factors contributed to that success and which did not. The most important factor contributing to successful verification is the cooperation of the subject country. If a country has made the strategic decision to cooperate, then it is possible that verification can be successful. If the country chooses not to cooperate, verification might rest on random and unpredictable events. This unpredictability of verification is politically unacceptable. Even if verification is judged to be successful by the implementing agencies, outsiders can cast doubts on it by pointing out small and potentially unavoidable errors in material amounts verified. It is vitally important to systematically preserve forensic evidence, especially shipping and receiving records to avoid just such issues. Historically, such records are the most important evidence in verifying denuclearization. Technology is far less important than forensic analysis of records. It does play a supporting role in verifying some declarations but there can be an enormous delay in drawing conclusions caused by the necessity to analyze statistically large samples of materials. The confidence one gets from such analysis can be delayed well past the time it is politically significant. The most important advance in technology would be to accelerate that sample analysis process.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗