SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Externally blown flap and upper surface blown flap powered lift concepts were investigated in the Quiet Clean Short-Haul Experimental Engine Program and briefly discussed along with propulsion system requirements. Noise limits, emission standards, thrust requirements, and thrust-to-weight ratios are among the factors considered.
Technology generated by NASA and specifically oriented toward advanced commercial air transport is reviewed. Results of the Aircraft Energy Efficiency program and of related disciplinary areas are reported. The CTOL research efforts are put into perspective relative to the total NASA aeronautics program.
The primary objective of Navy sponsored research in thrust augmentation is the development of an improved augmenter for V/STOL application. In support of this goal, a data base is being established to provide an accurate prediction capability for use in ejector design. A general technology development of ejectors and associated effects presently is split into the more specific areas of lift and control, since thrust augmenting ejectors may be suitable for both. Research areas examined include advanced diffuser and end wall design; advanced primary nozzles; analytic studies; augmenting reaction controls; and nozzle design.
The Magsat project which is designed to provide precise measurements of the near-earth geomagnetic field is examined. Rapidly obtained global surveys are possible through satellite observations without the long-term variations obtained by conventional surface measurements. The altitude for Magsat measurements is a trade-off between the lowest possible altitude necessary for increasing the anomaly signals and their spatial resolution, and the minimum satellite lifetime necessary for obtaining adequate data distribution. A nominal perigee of 350 km was selected. The background leading to the project inception and mission objectives are discussed along with plans to study regional geology and geophysics.
Interactions with all 14 of the states in the Western Region over the past three years are reviewed from NASA's perspective. Outreach and training programs using the M mobile analysis and training extension van, the University Program, classes at the Ames Center, demonstration tests with state agencies, and surveying the needs of local governments are highlighted. Planned activities, the continuance of ASVT's, and the impact of the budget cuts on NASA'S technology program are also considered.
The NASA Scatterometer (NSCAT) to fly on the U.S. Navy Remote Ocean Sensing System (N-ROSS) mission is presented. The overall N-ROSS mission, the NSCAT flight instrument and groundbased data processing/distribution system, and NASA-supported science and verification activities are described. The N-ROSS system is designed to provide measurements of near-surface wind, ocean topography, wave height, sea-surface temperature, and atmospheric water content over the global oceans. The NSCAT is an improved version of the Seasat scatterometer. It will measure near surface vector winds.
In order to meet the anticipated needs in modeling and analysis of advanced aerospace structures, NASA has developed a program focused on computational structural mechanics. The objective of this program is to advance the state-of-the-art in computational analysis to make accurate analysis of very large and complex structural problems routine. This will be accomplished by emphasizing two key areas: (1) the development of advanced analytical methods, extending beyond traditional approaches and, (2) the exploitation of the newest and most powerful parallel/multiprocessor computers available. Computational testbeds will be developed to serve as technology integrators and to promote/accelerate methodology research and development. An additional, and highly desirable, effect of the Computational Structural Mechanics (CSM) program would be to influence the design of future hardware and software systems to reflect the needs of structural analysis.
This program is aimed at developing sensors and measurement systems capable of obtaining the data necessary for the verification of computational models of the structural behavior, the fatigue life, and the environmental conditions pertinent to advanced reusable space propulsion systems. One of the characteristics of measurement systems needed to verify codes is that the sensors must be nonintrusive or at least minimally intrusive so as not to significantly perturb the conditions being measured. This leads to a heavy emphasis on laser optical techniques and on thin-film sensors. Another characteristic of such instruments is that they must be highly accurate and produce very high spatial and temporal resolution of the parameter being measured. The measurement systems needed generally fall into a number of broad categories. First there are the measurements needed on the surfaces of components such as turbine blades and vanes. Some of the desired parameters are temperature, strain, and heat flux. Another broad category encompasses those measurements needed in the flow environment around these components. Here, the desired results are high resolution maps of such parameters as flow velocity, temperature, density, pressure, and species concentration. The remaining category deals with measurements necessary for monitoring the health of the engine. This category has loomed ever more important since the Challenger disaster. An optical method for determining the characteristics of the plume is presented. Holographic measurement of structural damage is also presented.
A detailed review is presented of Spacelab experiments, equipment, methodologies, and aims emphasizing the 16 dedicated missions for Space Shuttle flights. Extensive illustrations of experimental set-ups and payload configurations are given showing the Space Shuttle payload bay. Among the experiments described are: (1) the Astro-1 UV and X-ray astronomy mission; (2) the Spacelab Life Science-1 mission for human activity in space; (3) the International Microgravity Laboratory-1 for materials and biological studies; (4) the Atmospheric Laboratory for Applications and Science to study solar effects on the earth; and (5) the Space Radar Laboratory for mapping the earth. Spacelab ground support is discussed and shown to be important for the planning, integration, and flight activities of the experiment programs.
A workshop on National Structures Programs was held, jointly sponsored by the AIAA Structures Technical Committee, the University of Virginia's Center for Advanced Computational Technology and NASA. The Objectives of the Workshop were to: provide a forum for discussion of current Government-sponsored programs in the structures area; identify high potential research areas for future aerospace systems; and initiate suitable interaction mechanisms with the managers of structures programs. The presentations covered structures programs at NASA, DOD (AFOSR, ONR, ARO and DARPA), and DOE. This publication is the presentation of the Structures and Acoustics Division of the NASA Lewis Research Center. The Structures and Acoustics Division has its genesis dating back to 1943. It is responsible for NASA research related to rotating structures and structural hot sections of both airbreathing and rocket engines. The work of the division encompasses but is not limited to aeroelasticity, structural life prediction and reliability, fatigue and fracture, mechanical components such as bearings, gears, and seals, and aeroacoustics. These programs are discussed and the names of responsible individuals are provided for future reference.
On August 3, 1977, the Soviet Union launched Cosmos 936, an unmanned spacecraft carrying biology and physics experiments from 9 countries, including both the Soviet Union and U.S. The launch marked the second time the Soviet Union has flown U.S. experiments aboard one of its spacecraft, the first being Cosmos 782 launched Nov. 25, 1975, which remained in orbit 19.5 days. Aboard Cosmos 936 were: 30 young male Wistar SPF rats, 20 of which was exposed to hypogravity during flight while the remainder were subjected to a l x g acceleration by continuous configuration; 2) experiments with plants and fruit flies; 3) radiation physics experiments; and 4) a heat convection experiment. After 18.5 days in orbit, the spacecraft landed in central Asia where a Soviet recovery team began experiment operations, including animal autopsies, within 4.5 hr of landing. Half of the animals were autopsied at the recovery site and the remainder returned to Moscow and allowed to readapt to terrestrial gravity for 25 days after which they, too, were autopsied. Specimens for U.S. were initially prepared at the recovery site or Soviet laboratories and transferred to U.S. laboratories for complete analyses. An overview of the mission focusing on preflight, on-orbit, and postflight activities pertinent to the seven U.S. experiments aboard Cosmos 936 will be presented.
Mechanical cryocoolers represent a significant enabling technology for NASA's Earth and Space Science Enterprises, as well as augmenting existing capabilities in space exploration. An over-view is presented of on-going efforts at the Goddard Space Flight Center and the Jet Propulsion Laboratory in support of current flight projects, near-term flight instruments, and long-term technology development.
An off-line version of the Transonic Wall Interference Correction System (TWICS) has been implemented for the NASA Langley National Transonic Facility (NTF). The correction capability includes both solid and horizontally slotted test section configurations. A study is underway to assess and characterize the accuracy of the TWICS code as implemented in the NTF. The purpose of this paper is to present the test program and display preliminary results.
NASA's Exploration Systems Mission Directorate (ESMD) is implementing a management approach for modeling and simulation (M&S) that will provide decision-makers information on the model s fidelity, credibility, and quality. The Integrated Modeling & Simulation Verification, Validation and Accreditation (IM&S W&A) process will allow the decision-maker to understand the risks involved in using a model s results for mission-critical decisions. The W&A Technical Working Group (W&A TWG) has been identified to communicate this process throughout the agency. As the W&A experts, the W&A NVG will be the central resource for support of W&A policy, procedures, training and templates for documentation. This presentation will discuss the W&A Technical Working Group s outreach approach aimed at educating M&S program managers, developers, users and proponents on the W&A process, beginning at MSFC with the CLV program.
Explore the source record for details and available documents.
This viewgraph presentation reviews the development of a technology program leading to Mars missions. The presentation includes: the goals of technology program, elements of technology program, program metrics, major accomplishments, examples and Information about the Mars Technology Program.
The James Webb Space Telescope (JWST) is a large aperture (6.5 meter), cryogenic space telescope with a suite of near and mid-infrared instruments covering the wavelength range of 0.6 micron to 28 micron. JWST's primary science goal is to detect and characterize the first galaxies. It will also study the assembly of galaxies, star formation, and the formation of evolution of planetary systems. We will review the expected scientific performance of the observatory, and recent technical progress with the observatory and its complement of instruments.