Search NASA⌕ Search

SEARCH · Search NASA

Results for “progress properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Implications of End Points on Remediation - 20476

The Port Hope Area Initiative (PHAI) is a federal environmental clean-up program. Its mandate is the remediation and local, long-term, safe management of approximately 1.7 million cubic metres of historic low-level radioactive waste in the adjacent communities of Port Hope and Port Granby in Southern Ontario, Canada. The PHAI is being undertaken by Canadian Nuclear Laboratories (CNL), on behalf of Atomic Energy of Canada Limited, a federal Crown corporation. It is currently one of the largest environmental remediation projects in Canada. The safety of workers, the public and the environment while delivering the PHAI compliantly, on time and within budget is CNL's number one priority. The PHAI is being implemented as two projects - the Port Hope Project and the Port Granby Project. The Port Hope Project is the larger of the two and includes the cleanup of approximately 1.2 million cubic metres of historic waste. The Port Hope Project includes a unique and important component - the remediation of approximately 1,200 private residences and businesses to include both interior and exterior verification of soil and surface-contaminated objects. Planning and consultation for the PHAI clean-up criteria and remediation verification standard operating procedures (RVSOP) were initiated in the early 2000's. The criteria were developed through a cooperative effort involving the PHAI, scientific specialists, federal and provincial government agencies, peer reviewers, the municipalities and members of the public. Subsequent verification procedures which detail the unique systematic methods to verify compliance with the clean-up criteria were developed by CNL in consultation with federal regulators and relevant stakeholders. Now, specifically with the Port Hope Small-Scale Sites project having been underway for a year and approximately 38 properties in some stage of remediation, it has become increasingly evident that the practical application of the clean-up criteria and RVSOP methodology is posing unique challenges that are having direct impact on project execution. The current RVSOP approach is based on discrete sample verification not allowing failure of any one sample. When implemented in the field, particularly at the Small-Scale Sites, it leads to a much more extensive excavation than what was accounted for in the original design, the implications of which are substantial delays in project progress and much more significant impact on the individual properties than originally anticipated. This paper will examine the evolution of PHAI clean-up criteria, subsequent RVSOP methodology and its impact on current project execution and the justification for exploring potential revisions to methods of remediation verification. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Development of Standardized Property Requirements, Measurement Methods, and Reporting Guidance for Coatings

The diverse research programs presently in progress around the world have advanced a large number of coated cladding concepts to various stages of maturity. Industry teams have developed leading coating compositions and geometries, but significant disparity exists in the importance placed on different coating properties, as well as the applicability and standardization of the various methods used to measure these properties. This milestone report provides an initial assessment of the most important coating properties and the experimental methods available for their determination to lay the foundation for standardized reporting and development of comprehensive datasets for modeling efforts. This report has determined that the residual stress of the coating is the most crucial property to investigate, yet it has received minimal attention to date due to a knowledge gap about the growth and formation of the brittle Laves phase under reactor conditions. The significance of residual stress of the coating is further enhanced by its connection and interdependence with other important properties like creep and coating failure mechanisms. This milestone proposes an importance rating for residual stress properties and their associated measurement techniques to fill in knowledge. Furthermore, techniques to investigate the outlined properties are discussed, and their capabilities and limitations are illustrated to provide guidance on their use.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2007

Composite Nanomechanics: A Mechanistic Properties Prediction

A unique mechanistic theory is described to predict the properties of nanocomposites. The theory is based on composite micromechanics with progressive substructuring down to a nanoscale slice of a nanofiber where all the governing equations are formulated. These equations have been programmed in a computer code. That computer code is used to predict 25 properties of a mononanofiber laminate. The results are presented graphically and discussed with respect to their practical significance. Most of the results show smooth distributions. Results for matrix-dependent properties show bimodal through-the-thickness distribution with discontinuous changes from mode to mode.

Chamis, Christos C.↗
NASA NTRS2007

Composite Nanomechanics: A Mechanistic Properties Prediction

A unique mechanistic theory is described to predict the properties of nanocomposites. The theory is based on composite micromechanics with progressive substructuring down to a nanoscale slice of a nanofiber where all the governing equations are formulated. These equations hav e been programmed in a computer code. That computer code is used to predict 25 properties of a mononanofiber laminate. The results are pr esented graphically and discussed with respect to their practical sig nificance. Most of the results show smooth distributions. Results for matrix-dependent properties show bimodal through-the-thickness distr ibution with discontinuous changes from mode to mode.

Chamis, Christos C.↗
NASA NTRS2007

Probabilistic Simulation for Nanocomposite Characterization

A unique probabilistic theory is described to predict the properties of nanocomposites. The simulation is based on composite micromechanics with progressive substructuring down to a nanoscale slice of a nanofiber where all the governing equations are formulated. These equations have been programmed in a computer code. That computer code is used to simulate uniaxial strengths properties of a mononanofiber laminate. The results are presented graphically and discussed with respect to their practical significance. These results show smooth distributions.

Chamis, Christos C.↗
DOE OSTI2018

Establishing the effects of mesoporous silica nanoparticle properties on in vivo disposition using imaging-based pharmacokinetics

Abstract The progress of nanoparticle (NP)-based drug delivery has been hindered by an inability to establish structure-activity relationships in vivo. Here, using stable, monosized, radiolabeled, mesoporous silica nanoparticles (MSNs), we apply an integrated SPECT/CT imaging and mathematical modeling approach to understand the combined effects of MSN size, surface chemistry and routes of administration on biodistribution and clearance kinetics in healthy rats. We show that increased particle size from ~32- to ~142-nm results in a monotonic decrease in systemic bioavailability, irrespective of route of administration, with corresponding accumulation in liver and spleen. Cationic MSNs with surface exposed amines (PEI) have reduced circulation, compared to MSNs of identical size and charge but with shielded amines (QA), due to rapid sequestration into liver and spleen. However, QA show greater total excretion than PEI and their size-matched neutral counterparts (TMS). Overall, we provide important predictive functional correlations to support the rational design of nanomedicines.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Progress and Perspectives: Zirconium Electrodeposition from Different Electrolytes

Zirconium (Zr) possesses outstanding properties, including exceptional chemical resistance and a high melting point, and is therefore desirable for use in a wide variety of challenging environments, such as in nuclear reactors and the chemical processing industry. To minimize the amount of Zr required for any given application, developing methods for generating metallic Zr coatings is highly advantageous. Owing to Zr’s highly negative reduction potential, electrodeposition in traditional solvents at near ambient temperatures remains challenging and thus not well understood. Due to the extreme conditions required to deposit this metal, extensive work has been conducted in molten salt electrolytes, however the broad applicability of this methodology is limited due to its corrosivity. The primary focus of this article is to present an overview of Zr’s electrochemical behavior and to consolidate the efforts of researchers in exploring electrodeposition techniques for Zr involving aqueous, organic, ionic liquid, deep eutectic, and molten salt solvents. With this information, we highlight trends across solvent systems and opportunities for future research.

42 ENGINEERING↗
NASA NTRS2012

Challenges for Insertion of Structural Nanomaterials in Aerospace Applications

In the two decades since Iijima's report on carbon nanotubes (CNT), there has been great interest in realizing the benefits of mechanical properties observed at the nanoscale in large-scale structures. The weight savings possible due to dramatic improvements in mechanical properties relative to state-of-the-art material systems can be game changing for applications like aerospace vehicles. While there has been significant progress in commercial production of CNTs, major aerospace applications that take advantage of properties offered by this material have yet to be realized. This paper provides a perspective on the technical challenges and barriers for insertion of CNTs as an emerging material technology in aerospace applications and proposes approaches that may reduce the typical timeframe for technology maturation and insertion into aerospace structures.

Sochi, Emilie J.↗
DOE OSTI2016

Effect of Alloying Additions on Wrought FeCrAl Alloys for Accident-Tolerant Fuel Cladding

Nuclear-grade wrought Fe-Cr-Al alloys are under development as one of the candidate materials for accident-tolerant fuel (ATF) cladding for light water reactors (LWRs) because of their superior oxidation and corrosion resistance in high-temperature steam environment compared to Zr-based alloys that are currently in service. Numerous efforts have been made for the development of the FeCrAl alloys with the ATF concept. The current researches focused on optimizing the balance between the improved environmental compatibility and sufficient mechanical properties in both normal service condition and under accident scenario, as well as fabricability of seamless tube product for fuel cladding applications. Alloying addition is one of the key factors to control the various properties. The effect of Cr and Al additions on the properties in model Fe-Cr-Al-Y alloys were systematically examined by the authors, and the candidate base alloy composition with 13 wt.% Cr and 5 wt.% Al was proposed for further development. The modified FeCrAl alloys with Mo and Nb additions were also investigated in order to achieve improved strength. It was revealed that the microstructure control together with the thermal stability to retain desired microstructure were also the dominant factors for successful development of ATF FeCrAl alloys, especially when the fabricability of seamless tube production was also considered. This paper summarizes further investigation of alloying effects with a wide composition range of Cr and Al additions in the model alloys, as well as the effect of minor alloying additions of Mo, Nb, and Zr, through evaluation of the tensile properties. The combined effect of microstructure control is also discussed. Effect of alloying additions on tensile properties of wrought FeCrAl alloys was investigated. Minor alloying additions such as Al, Mo, Nb, and Zr were found to improve room-temperature tensile strength of the wrought FeCrAl alloys significantly. It was also found that stabilized deformed microstructure consisting of subgrains was also effective to improve the properties compared to the recrystallized grain structure. Optimization to balance the properties and the seamless FeCrAl tube fabricability is currently in progress. (authors)

36 MATERIALS SCIENCE↗
DOE OSTI2019

Manipulating nanoscale structure to control functionality in printed organic photovoltaic, transistor and bioelectronic devices

Printed electronics is simultaneously one of the most intensely studied emerging research areas in science and technology and one of the fastest growing commercial markets in the world today. For the past decade the potential for organic electronic (OE) materials to revolutionize this printed electronics space has been widely promoted. Such conviction in the potential of these carbon-based semiconducting materials arises from their ability to be dissolved in solution, and thus the exciting possibility of simply printing a range of multifunctional devices onto flexible substrates at high speeds for very low cost using standard roll-to-roll printing techniques. However, the transition from promising laboratory innovations to large scale prototypes requires precise control of nanoscale material and device structure across large areas during printing fabrication. Maintaining this nanoscale material control during printing presents a significant new challenge that demands the coupling of OE materials and devices with clever nanoscience fabrication approaches that are adapted to the limited thermodynamic levers available. In this review we present an update on the strategies and capabilities that are required in order to manipulate the nanoscale structure of large area printed organic photovoltaic (OPV), transistor and bioelectronics devices in order to control their device functionality. This discussion covers a range of efforts to manipulate the electroactive ink materials and their nanostructured assembly into devices, and also device processing strategies to tune the nanoscale material properties and assembly routes through printing fabrication. The review finishes by highlighting progress in printed OE devices that provide a feedback loop between laboratory nanoscience innovations and their feasibility in adapting to large scale printing fabrication. The ability to control material properties on the nanoscale whilst simultaneously printing functional devices on the square metre scale is prompting innovative developments in the targeted nanoscience required for OPV, transistor and biofunctional devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1948

Metallurgical Research Relating to the Development of Metals and Alloys for Use in the High-Temperature Components of Jet-Engines, Gas Turbines and Other Aircraft Propulsion Systems

Studies are in progress to establish the fundamental processes by which treatment and composition control properties of commercial alloys at high temperatures. Low-Carbon N155 and Inconel-X alloys are being used as indicative of two types of alloys of major interest. Progress has been reported three time previously. The work has been separated into two sections: studies of structures resulting from solu tion treatment and aging and studies of structures resulting from rolling at various temperatures. Brief descriptions of experimental techniques used, results, and interpretation of the data obtained to date are summarized below. Since the work outlined is to a large extent still in progress, the discussion given is to be considered tentative and subject to further modification as additional data becomes available.

Source record↗
DOE OSTI2018

Nanocellulose toward Advanced Energy Storage Devices: Structure and Electrochemistry

We report that cellulose is the most abundant biopolymer on Earth and has long been used as a sustainable building block of conventional paper. Note that nanocellulose accounts for nearly 40% of wood’s weight and can be extracted using well-developed methods. Due to its appealing mechanical and electrochemical properties, including high specific modulus (~100 GPa/(g/cm 3 )), excellent stability in most solvents, and stability over a wide electrochemical window, nanocellulose has been widely used as a separator, electrolyte, binder, and substrate material for energy storage. Additionally, nanocellulose-derived carbon materials have also drawn increasing scientific interest in sustainable energy storage due to their low-cost and raw-material abundance, high conductivity, and rational electrochemical performance. The inexpensive and environmentally friendly nature of nanocellulose and its derivatives as well as simple fabrication techniques make nanocellulose-based energy storage devices promising candidates for the future of “green” and renewable electronics. For nanocellulose-based energy storage, structure engineering and design play a vital role in achieving desired electrochemical properties and performances. Thus, it is important to identify suitable structure and design engineering strategies and to better understand their relationship. In this Account, we review recent developments in nanocellulose-based energy storage. Due to the limited space, we will mainly focus on structure design and engineering strategies in macrofiber, paper, and three-dimensional (3D) structured electrochemical energy storage (EES) devices and highlight progress made in our group. We first present the structure and properties of nanocellulose, with a particular discussion of nanocellulose from wood materials. We then go on to discuss studies on nanocellulose-based macrofiber, paper, and 3D wood- and other aerogel-based EES devices. Within this discussion, we highlight the use of natural nanocellulose as a flexible substrate for a macrofiber supercapacitor and an excellent electrolyte reservoir for a breathable textile lithium–oxygen battery. Paper batteries and supercapacitors using nanocellulose as a green dispersant, nanocellulose-based paper as a flexible substrate, and nanocellulose as separator and electrolyte are also examined. We highlight recent progress on wood-based batteries and supercapacitors, focusing on the advantages of wood materials for energy storage, the structure design and engineering strategies, and their microstructure and electrochemical properties. We discuss the influence of structure (particularly pores) on the electrochemical performance of the energy storage devices. By taking advantage of the straight, nature-made channels in wood materials, ultrathick, highly loaded, and low-tortuosity energy storage devices are demonstrated. Lastly, we offer concluding remarks on the challenges and directions of future research in the field of nanocellulose-based energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2020

Heterogeneities at multiple length scales in 2D layered materials: From localized defects and dopants to mesoscopic heterostructures

Two-dimensional (2D) materials hold great promise for applications in optoelectronics, quantum information science, and energy conversion due to their remarkable properties imbued by their physical characteristics. Although heterogeneities in their intrinsic structure are the major challenges limiting their synthesis and predictable properties, they also provide a pathway to controllably tune the properties and broaden the potential of 2D materials. Heterogeneities that can be tailored, including defects, dopants, strain, edges, and layer stackings offer transformative opportunities in heterogeneous 2D materials through the introduction of novel properties for technological applications. This article provides a review of recent progress in studying heterogeneities in 2D materials. The review uses examples from our work to develop a strategy to understand the heterogeneities across multiple length scales to link the effect of heterogeneity at the nanoscale with the macroscale properties of 2D materials. We describe specific types of heterogeneities and explore novel synthesis and processing methods for their controlled production with example of the potential impact and applications enabled by their intriguing properties. Finally, we provide a perspective on how to extend the range of tunable properties through further engineering the heterogeneities in 2D materials.

2D materials↗
DOE OSTI2017

Plasma–wall interaction studies within the EUROfusion consortium: progress on plasma-facing components development and qualification

The provision of a particle and power exhaust solution which is compatible with first-wall components and edge-plasma conditions is a key area of present-day fusion research and mandatory for a successful operation of ITER and DEMO. The work package plasma-facing components (WP PFC) within the European fusion programme complements with laboratory experiments, i.e. in linear plasma devices, electron and ion beam loading facilities, the studies performed in toroidally confined magnetic devices, such as JET, ASDEX Upgrade, WEST etc. The connection of both groups is done via common physics and engineering studies, including the qualification and specification of plasma-facing components, and by modelling codes that simulate edge-plasma conditions and the plasma–material interaction as well as the study of fundamental processes. WP PFC addresses these critical points in order to ensure reliable and efficient use of conventional, solid PFCs in ITER (Be and W) and DEMO (W and steel) with respect to heat-load capabilities (transient and steady-state heat and particle loads), lifetime estimates (erosion, material mixing and surface morphology), and safety aspects (fuel retention, fuel removal, material migration and dust formation) particularly for quasi-steady-state conditions. Alternative scenarios and concepts (liquid Sn or Li as PFCs) for DEMO are developed and tested in the event that the conventional solution turns out to not be functional. Here, we present an overview of the activities with an emphasis on a few key results: (i) the observed synergistic effects in particle and heat loading of ITER-grade W with the available set of exposition devices on material properties such as roughness, ductility and microstructure; (ii) the progress in understanding of fuel retention, diffusion and outgassing in different W-based materials, including the impact of damage and impurities like N; and (iii), the preferential sputtering of Fe in EUROFER steel providing an in situ W surface and a potential first-wall solution for DEMO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗