Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Microwave resonant activation in hybrid single-gap/two-gap Josephson tunnel junctions

Microwave resonant activation is a powerful, straightforward technique to study classical and quantum systems, experimentally realized in Josephson junction devices cooled to very low temperatures. These devices typically consist of two single-gap superconductors separated by a weak link. We report the results of the first resonant activation experiments on hybrid thin film Josephson junctions consisting of a multi-gap superconductor (MgB 2 ) and a single-gap superconductor (Pb or Sn). We can interpret the plasma frequency in terms of theories both for conventional and hybrid junctions. Using these models, we determine the junction parameters including critical current, resistance, and capacitance and find moderately high quality factors of Q 0 ~100 for these junctions

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modulating effects of the low-frequency source on ion energy distributions in a dual frequency capacitively coupled plasma

With the energy resolved quadrupole mass spectrometer and hybrid simulation, the influence of low-frequency (LF) source parameters on the ion energy distributions (IEDs) of argon ions impinging on the grounded electrode was studied, both experimentally and numerically, in a dual frequency capacitively coupled plasma. It was shown that for decreasing LF or increasing LF power, the high energy peak in IEDs shifts toward the high energy region significantly. The simulation results were in general agreement with the experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Terahertz response of fractal meta-atoms based on concentric rectangular square resonators

We investigate the terahertz electromagnetic responses of fractal meta-atoms (MAs) induced by different mode coupling mechanisms. Two types of MAs based on concentric rectangular square (CRS) resonators are presented: independent CRS (I-CRS) and junctional-CRS (J-CRS). In I-CRS, each resonator works as an independent dipole so as to result in the multiple resonance modes when the fractal level is above 1. In J-CRS, however, the generated layer is rotated by π/2 radius to the adjacent CRS in one MA. The multiple resonance modes are coupled into a single mode resonance. The fractal level increasing induces resonance modes redshift in I-CRS while blueshift in J-CRS. When the fractal level is below 4, the mode Q factor of J-CRS is in between the two modes of I-CRS; when the fractal level is 4 or above, the mode Q factor of J-CRS exceeds the two modes of I-CRS. Furthermore, the modulation depth (MD) decreases in I-CRS while it increases in J-CRS with the increase in fractal levels. The surface currents analysis reveals that the capacitive coupling of modes in I-CRS results in the modes redshift, while the conductive coupling of modes in J-CRS induces the mode blueshift. A high Q mode with large MD can be achieved via conductive coupling between the resonators of different scales in a fractal MA.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Graphene-based tunable dual-band absorbers by ribbon/disk array

This article presents two dual-band absorbers based on graphene one-dimensional (1D)/two-dimensional (2D) patterned arrays in the THz frequencies. In comparison to the previous work, the structure of the proposed device is very simple. Most of the dual-band absorbers are made by the combined resonances of the resonators with various sizes within the structure. In this paper, the proposed absorber is based on the arrays of one element. The graphene patterned arrays have dual capacitive-inductive nature. The circuit model of graphene patterned appears as the infinite number of parallel R–L–C circuits, each representing a single resonant mode. In this paper, the fundamental resonant mode of graphene patterned array is excited at both resonant bands. The impedance matching and resonance conditions are used to achieve two resonance bands with perfect absorption.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A study on the maximum power transfer condition in an inductively coupled plasma using transformer circuit model

Correlations between the external discharge parameters (the driving frequency ω and the chamber dimension R) and plasma characteristics (the skin depth δ and the electron-neutral collision frequency ν{sub m}) are studied using the transformer circuit model [R. B. Piejak et al., Plasma Sources Sci. Technol. 1, 179 (1992)] when the absorbed power is maximized in an inductively coupled plasma. From the analysis of the transformer circuit model, the maximum power transfer conditions, which depend on the external discharge parameters and the internal plasma characteristics, were obtained. It was found that a maximum power transfer occurs when δ≈0.38R for the discharge condition at which ν{sub m}/ω≪1, while it occurs when δ≈√(2)√(ω/ν{sub m})R for the discharge condition at which ν{sub m}/ω≫1. The results of this circuit analysis are consistent with the stable last inductive mode region of an inductive-to-capacitive mode transition [Lee and Chung, Phys. Plasmas 13, 063510 (2006)], which was theoretically derived from Maxwell's equations. Our results were also in agreement with the experimental results. From this work, we demonstrate that a simple circuit analysis can be applied to explain complex physical phenomena to a certain extent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoposition sensors with superior linear response to position and unlimited travel ranges

With the advancement in nanotechnology, the ability of positioning/measuring at subnanometer scale has been one of the most critical issues for the nanofabrication industry and researchers using scanning probe microscopy. Commercial nanopositioners have achieved direct measurements at the scale of 0.01 nm with capacitive sensing metrology. However, the commercial sensors have small dynamic ranges (up to only a few hundred micrometers) and are relatively large in size (centimeters in the transverse directions to the motion), which is necessary for healthy signal detections but making it difficult to use on smaller devices. This limits applications in which large materials (on the scale of centimeters or greater) are handled with needs of subnanometer resolutions. What has been done in the past is to combine the fine and coarse translation stages with different dynamic ranges to simultaneously achieve long travel range and high spatial resolution. In this paper, we present a novel capacitive position sensing metrology with ultrawide dynamic range from subnanometer to literally any practically desired length for a translation stage. This sensor will greatly simplify the task and enhance the performance of direct metrology in a hybrid translational stage covering translation tasks from subnanometer to centimeters.

36 MATERIALS SCIENCE↗

Radio-frequency capacitive discharge with flowing liquid electrodes at reduced gas pressures

Results are presented from experimental studies of the electrophysical and spectral characteristics of the low-temperature plasma of a radio-frequency capacitive discharge excited between two flowing liquid electrodes at gas pressures of 10{sup 3}−10{sup 5} Pa. The plasma composition, the electron density, and the vibrational and rotational temperatures of gas molecules are estimated. The types and shapes of discharge are described, and the thermal and gas-hydrodynamic processes in the discharge zone are analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultranarrow electroluminescence from magnetic excitons in the van der Waals antiferromagnetic semiconductor NiPS 3

Electrically driven light emission from two-dimensional (2D) semiconducting materials has enabled numerous optoelectronic technologies, including light-emitting diodes, solid-state lasers, and single-photon sources for quantum communication. Here we report ultranarrow electroluminescence from the magnetic excitonic state of the van der Waals antiferromagnetic semiconductor NiPS 3 . This electroluminescence is enabled by the fabrication of gate-tunable NiPS 3 devices that remain electrically conductive below the antiferromagnetic ordering temperature of 155 K, ultimately allowing field-effect mobilities of 1.3 cm 2 V –1 s –1 and 4.5 cm 2 V –1 s –1 to be directly measured at room temperature and 7 K, respectively. By applying a high-frequency square wave voltage to the gate electrode of the resulting field-effect transistors, electroluminescence is capacitively induced from the magnetic excitons of NiPS 3 . Due to the coupling of these excitons with the underlying NiPS 3 antiferromagnetic order, the electroluminescence has an ultranarrow linewidth of 1 meV and a high degree of linear polarization (ρ = 0.78). In addition to facilitating fundamental studies of the coupling between spin states and excitons in van der Waals magnetic semiconductors, this work will accelerate the development of emerging 2D opto-spintronic applications.

two-dimensional materials↗

Reduced graphene oxide filled poly(dimethyl siloxane) based transparent stretchable, and touch-responsive sensors

The ongoing revolution in touch panel technology and electronics demands the need for thin films, which are flexible, stretchable, conductive, and highly touch responsive. In this regard, conductive elastomer nanocomposites offer potential solutions for these stipulations; however, viability is limited to the poor dispersion of conductive nanomaterials such as graphene into the matrix. Here, we fabricated a reduced graphene oxide (rGO) and poly(dimethylsiloxane) (PDMS) elastomer based transparent and flexible conductive touch responsive film by dispersing rGO honeycombs uniformly into PDMS elastomer through an ionic liquid (IL) modification. Pursuing a simple, scalable, and safe method of solution casting, this provides a versatile and creative design of a transparent and stretchable rGO/IL-PDMS capacitive touch responsive, where rGO acts as a sensing element. This transparent film with ∼70% transmittance exhibits approximately a five times faster response in comparison to rGO/PDMS film, with negligible degradation over time. The performance of this touch screen film is expected to have applications in the emerging field of foldable electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermo-optically tuned photonic resonators with concurrent electrical connection and thermal isolation

A photonic resonator system is designed to use thermal tuning to adjust the resonant wavelength of each resonator in the system, with a separate tuning circuit associated with each resonator so that individual adjustments may be made. The common electrical ground connection between the tuning circuits is particularly formed to provide thermal isolation between adjacent resonators by including a capacitor along each return path to ground, where the presence of the capacitor's dielectric material provides the thermal isolation. The use of capacitively coupling necessarily requires the use of an AC current as an input to the heater element (conductor/resistor) of each resonator, where the RMS value of the AC signal is indicative of the amount of heat that is generated along the element and the degree of wavelength tuning that is obtained.

36 MATERIALS SCIENCE↗

Effect of gas pressure on ion flux in 2 MHz capacitive discharge

We have studied the ion energy and angular distribution functions in a 2 MHz capacitive discharge using combined particle in cell Monte Carlo collision simulations. We found that secondary electrons produced by ion bombardment from the electrodes make important contribution to the ionization at higher gas pressure. Calculations showed that the ion flux on the electrode is very sensitive to the plasma parameters. However, the ion angular distribution function weakly responds to a change of the gas pressure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of rf-bias power on plasma parameters in a low gas pressure inductively coupled plasma

Remarkable changes of the electron temperature and the plasma density by increasing bias power were observed in low gas pressure inductively coupled plasma (ICP) by the measurement of electron energy distribution function (EEDF). As the bias power increases, the electron temperature increased with accompanying the evolution of the EEDF from a bi-Maxwellian to a Maxwellian distribution. However, a different trend of the plasma density was observed with a dependence on the ICP powers. When the ICP power was relatively small or the discharge is in capacitive mode (E mode), the plasma density increased considerably with the bias power, while decrease of the plasma density was observed when the discharge is in inductive mode (H mode). The change of the plasma density can be explained by the balance between total power absorption and power dissipation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anderson localization of graphene by helium ion irradiation

Irradiation of a single-layer graphene (SLG) with accelerated helium ions (He{sup +}) controllably generates defect distributions, which create a charge carrier scattering source within the SLG. We report direct experimental observation of metal-insulator transition in SLG on SiO{sub 2}/Si substrates induced by Anderson localization. This transition was investigated using scanning capacitance microscopy by monitoring the He{sup +} dose conditions on the SLG. The experimental data show that a defect density of more than ∼1.2% induced Anderson localization. We also investigated the localization length by determining patterned placement of the defects and estimated the length to be several dozen nanometers. These findings provide valuable insight for patterning and designing graphene-based nanostructures using helium ion microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elk: A New MOOSE Framework Application for Radio-frequency Electromagnetics

A new tool in-development for general electromagnetic (EM) simulation for modeling radio-frequency (rf) systems is presented. The primary motivation for development of this tool is to leverage the flexibility and high-performance-computing capability of the Multiphysics Object-Oriented Simulation Environment (MOOSE) Framework developed by Idaho National Laboratory (INL) for complex EM problems. A MOOSE application (or MOOSE App) enables the end user to create a fully-functional simulation scenario without needing explicit knowledge of the underlying finite-element weak form implementation. MOOSE combines the libMesh library and the PetSc suite as the finite element and solver libraries, giving a robust platform for solving highly non-linear, coupled sets of PDEs such as those found in EM and plasma physics problems. Initial validation efforts have included standard waveguide and antenna benchmarks with the current focus being field validation against the well-known capacitively-coupled GEC Reference Cell (GEC-CCP). The results of this effort will be outlined and discussed. Future work plans including cold-plasma rf wave propagation studies and coupling to the plasma fluid MOOSE App, Zapdos [Lindsay et al 2016 J. Phys. D: Appl. Phys. 49 235204], will also be discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The cryogenic storage ring CSR

An electrostatic cryogenic storage ring, CSR, for beams of anions and cations with up to 300 keV kinetic energy per unit charge has been designed, constructed, and put into operation. With a circumference of 35 m, the ion-beam vacuum chambers and all beam optics are in a cryostat and cooled by a closed-cycle liquid helium system. At temperatures as low as (5.5 ± 1) K inside the ring, storage time constants of several minutes up to almost an hour were observed for atomic and molecular, anion and cation beams at an energy of 60 keV. The ion-beam intensity, energy-dependent closed-orbit shifts (dispersion), and the focusing properties of the machine were studied by a system of capacitive pickups. The Schottky-noise spectrum of the stored ions revealed a broadening of the momentum distribution on a time scale of 1000 s. Photodetachment of stored anions was used in the beam lifetime measurements. The detachment rate by anion collisions with residual-gas molecules was found to be extremely low. A residual-gas density below 140 cm{sup −3} is derived, equivalent to a room-temperature pressure below 10{sup −14} mbar. Fast atomic, molecular, and cluster ion beams stored for long periods of time in a cryogenic environment will allow experiments on collision- and radiation-induced fragmentation processes of ions in known internal quantum states with merged and crossed photon and particle beams.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrical and chemical properties of XeCl*(308 nm) exciplex lamp created by a dielectric barrier discharge

The aim of this work is to highlight, through numerical modeling, the chemical and the electrical characteristics of xenon chloride mixture in XeCl* (308 nm) excimer lamp created by a dielectric barrier discharge. A temporal model, based on the Xe/Cl{sub 2} mixture chemistry, the circuit and the Boltzmann equations, is constructed. The effects of operating voltage, Cl{sub 2} percentage in the Xe/Cl{sub 2} gas mixture, dielectric capacitance, as well as gas pressure on the 308-nm photon generation, under typical experimental operating conditions, have been investigated and discussed. The importance of charged and excited species, including the major electronic and ionic processes, is also demonstrated. The present calculations show clearly that the model predicts the optimal operating conditions and describes the electrical and chemical properties of the XeCl* exciplex lamp.

36 MATERIALS SCIENCE↗

Physical and chemical properties of dust produced in a N{sub 2}-CH{sub 4} RF plasma discharge

Titan's atmospheric chemistry is simulated using a Capacitively Coupled Plasma discharge produced in a N{sub 2}-CH{sub 4} mixture. The produced solid particles are analysed ex-situ. Chemical properties are deduced from: elemental composition, FTIR and LTQ-Orbitrap mass spectrometer. Optical properties are deduced from reflectivity in visible and IR range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of the resonant growth of harmonics on the electron density in capacitively coupled plasma

The growth of harmonics is known to occur under the condition of plasma series resonance (PSR). In an actual plasma process chamber, the external circuit also affects the PSR. We experimentally demonstrated the resonant growth of the third and fourth harmonics by tuning a variable capacitor attached to the electrode, and investigated the influence of the growth on the electron density. We observed significant increases in electron density as the amplitude of harmonics grows. The result clearly shows that nonlinear electron resonance heating actually takes place.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗