SEARCH · Search NASA

Results for “radiative properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Direct comparison of gamma, electron beam and X-ray irradiation doses on characteristics of low-density polyethylene, polypropylene homopolymer, polyolefin elastomer and chlorobutyl rubber medical device polymers

There is a growing need for increased efficiency in the sterilization of single use medical devices and other products that contain polymer components. Gamma radiation is widely used for devices suited for radiation sterilization; however, safety, throughput and cobalt-60 source availability are challenging the prospect of relying on gamma radiation to meet the anticipated needs of the industry. Use of electron beam (e-beam) and X-rays as alternatives to gamma for radiation sterilization have been hampered in part by a concern that these modalities may adversely affect polymer integrity and performance relative to the gamma method, for which the industry has had much more experience. To address this concern, the effects of sterilization-relevant doses of ebeam, X-ray and gamma radiation were directly compared using common medical device polymers found in two prototypical commercial devices currently sterilized using cobalt-60 gamma irradiation. The Becton, Dickinson and Company (BD) Vacutainer™ Plus tube contains low-density polyethylene and chlorobutyl rubber components, while the BD Vacutainer™ Push Button Blood Collection Set contains polypropylene homopolymer and polyolefin elastomer components. Injection-molded samples prepared from the polymers used in these products were exposed to target doses of 15, 35, 50 and 80 kGy using gamma, e-beam and X-ray radiation. Changes in coloration, tensile properties and hardness were measured for each condition, and the effects of e-beam and X-ray irradiation compared with the effects of gamma irradiation on these properties. Both e-beam and X-ray appear as viable alternatives to gamma irradiation for sterilization of the polymers tested.

sterilization, gamma, X-ray, electron beam, radiat↗

DOE OSTI2023

Tuning charge carrier dynamics through spacer cation functionalization in layered halide perovskites: an ab initio quantum dynamics study

Dion–Jacobson (DJ) phase two-dimensional (2D) hybrid halide perovskites are promising for environmentally stable optoelectronic device applications due to their attractive photophysical properties, including long charge carrier lifetime and partially suppressed non-radiative losses. However, the atomistic details of the structure–property relationship are severely limited, which substantially restricts the strategic materials designed for these layered halide perovskites (LHPs). Here, we combine nonadiabatic molecular dynamics and time-domain density functional theory to understand the effects of spacer cation functionalization on the ground and excited-state charge carrier dynamics in DJ phase LHPs. Our in-depth study reveals that the fluorination of spacer cations considerably restricts the thermal motions of LHPs at ambient conditions. The compact structure weakens the overall electron–phonon interactions and reduces the thermal fluctuations of the band edges in real-time. These dynamic modifications partially mitigate the non-radiative recombination, prolonging the lifetime of photogenerated charge carriers. The suppressed carrier loss mechanism strongly suggests that the fluorinated spacer cation-based LHPs would exhibit enhanced performance as optoelectronic materials. These systematic simulations of excited state carrier dynamics elaborate that chemically viable functionalization of the spacer cations is a robust approach to improve the photophysical properties of 2D halide perovskites strategically. These insights also guide us to propose a few potential strategies to design highly beneficial spacer cations of LHPs that can be introduced in next-generation optoelectronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2021

ASME Code Rules and ASTM Standards Integration for Ceramic Composite Core Materials and Components 1

Fiber-reinforced ceramic matrix composites have many desirable properties for high-temperature nuclear applications, including excellent thermal and mechanical properties and reasonable to outstanding radiation resistance. Over the last 20 years, the use of ceramic composite materials has already expanded in many commercial nonnuclear industries as fabrication and application technologies mature. The new ASME design and construction rules under Section III, Subsection HH, Subpart B lay out the requirements and criteria for materials, design, machining and installation, inspection, examination, testing, and the marking procedure for ceramic composite core components, which is similar to the established graphite code under Section III, Subsection HH, Subpart A. Moreover, the general requirements listed in Section III, Subsection HA, Subpart B are also expanded to include ceramic composite materials. The code rules rely heavily on the development and publication of standards for composite specification, classification, and testing of mechanical, thermal, and other properties. These test methods are developed in the American Society for Testing and Materials Committee C28 on Advanced Ceramics with a current focus on ceramic composite tubes. Details of the composites code, design methodology, and similarities to the graphite code, as well as guidance for the development of specifications for ceramic composites for nuclear application and recent standard developments, are discussed. The next step is to "close the gap" to support licensing aspects by validating the code with benchmarking data.

Geringer, Josina↗

DOE OSTI2021

Review of Swift Heavy Ion Irradiation Effects in CeO2

Cerium dioxide (CeO2) exhibits complex behavior when irradiated with swift heavy ions. Modifications to this material originate from the production of atomic-scale defects, which accumulate and induce changes to the microstructure, chemistry, and material properties. As such, characterizing its radiation response requires a wide range of complementary characterization techniques to elucidate the defect formation and stability over multiple length scales, such as X-ray and neutron scattering, optical spectroscopy, and electron microscopy. In this article, recent experimental efforts are reviewed in order to holistically assess the current understanding and knowledge gaps regarding the underlying physical mechanisms that dictate the response of CeO2 and related materials to irradiation with swift heavy ions. The recent application of novel experimental techniques has provided additional insight into the structural and chemical behavior of irradiation-induced defects, from the local, atomic-scale arrangement to the long-range structure. However, future work must carefully account for the influence of experimental conditions, with respect to both sample properties (e.g., grain size and impurity content) and ion-beam parameters (e.g., ion mass and energy), to facilitate a more direct comparison of experimental results.

42 ENGINEERING↗

DOE OSTI2024

Benchmarking MCNP models to support gamma irradiation experiments

Seismic isolators and damping devices have been used for 30+ years to reduce seismic forces and deployed in 10,000+ structures, including bridges, buildings, and mission-critical infrastructure. Studies have shown that seismic isolation of nuclear power plants can reduce the seismic risk by several orders of magnitude and substantially reduce the overnight capital cost. Advanced reactor developers are considering seismic isolation as an integral design feature in their reactor design. It can either be deployed at the building level, isolating the entire reactor building, or at the component level, isolating individual pieces of safety-class equipment, such as a reactor vessel or a steam generator. For equipment isolation, located close to the reactor vessel, the seismic isolators and/or damping devices may be exposed to gamma and neutron radiation, with a possible effect on their mechanical properties which would affect the response of the isolated equipment under earthquake shaking. The Department of Energy, as part of its Nuclear Energy University Program (NEUP), in collaboration with the Idaho National Laboratory (INL), is funding a project at the University at Buffalo (UB) to investigate the effect of gamma radiation on the mechanical properties of various seismic protective devices. (When isolating equipment, the seismic protective devices will be located outside the reactor vessel where the neutron exposure will be insignificant.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2020

Nonlinear self-focusing in strongly magnetized pair plasma

An intense radiation field can modify plasma properties and the corresponding refractive index and lead to nonlinear propagation effects such as self-focusing. In this work, we estimate the corresponding effects in pair plasmas for circularly polarized waves, in both unmagnetized and strongly magnetically dominated cases. First, in the unmagnetized pair plasma the ponderomotive force does not lead to charge separation but to density depletion. Second, for astrophysically relevant plasmas of pulsar magnetospheres [and possible loci of fast radio bursts (FRBs)], where the cyclotron frequency $ω_B$ dominates over the plasma frequency $ω_p$ and the frequency of the electromagnetic wave $ω_B \gg ω_p, ω$, we show that (i) there is virtually no nonlinearity due to changing effective mass in the field of the wave; (ii) the ponderomotive force is $F^{(B)}_p = –m_ec^2/4B^2_0∇E^2$, which is reduced by a factor $(ω/ω_B)^2$ if compared to the unmagnetized case ($B_0$ is the external magnetic field and $\textit{E}$ is the electric field of the wave); and (iii) for a radiation beam propagating along a constant magnetic field in the pair plasma with density $n_±$, the ponderomotive force leads to the appearance of circular currents that lead to a decrease of the field within the beam by a factor $ΔB/B_0 = 2πn_±m_ec^2E^2 /B^4_0$. Applications to the physics of FRBs are discussed; we conclude that for the parameters of FRBs, the dominant magnetic field completely suppresses nonlinear self-focusing or filamentation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Physics-Guided Machine Learning for Prediction of Cloud Properties in Satellite-Derived Solar Data

With over 20 years of high-resolution surface irradiance data covering most of the western hemisphere, the National Solar Radiation Database (NSRDB) is a vital public data asset. The NSRDB uses a two-step Physical Solar Model (PSM) that explicitly considers the effects of clouds and other atmospheric variables on radiative transfer. High-quality physical and optical cloud properties derived from satellite imagery are perhaps the most important data inputs to the PSM, representing the greatest source of radiation attenuation and scattering. However, traditional methods for cloud property retrieval have their own limitations and are unable to accurately predict cloud properties outside of nominal conditions. We introduce a physics-guided neural network that can accurately predict cloud properties when traditional methods fail or are inaccurate. Using this framework, we show reductions in relative Root Mean Square Error (RMSE) for Global Horizontal Irradiance (GHI) up to 13 percentage points for timesteps that previously had missing or low-quality cloud property data. We expect that this methodology will be effective in improving the quality of cloud property and solar irradiance data in the NSRDB.

cloud properties↗

DOE OSTI2021

A novel network-based approach to determining measurement representation error for model evaluation of aerosol microphysical properties

Atmospheric aerosol size and abundance influence radiative effects and climate change. To date, efforts to constrain global climate models’ radiative forcing with in situ aerosol observations have been hamstrung by uncertainty. One source of error, the regional “representation error,” arises when accurate but sparse single-point measurements of atmospheric aerosol distributions are compared with a model value, assuming that the single-point measurement is representative of the model domain. The Portable Optical Particle Spectrometer network in the Southern Great Plains (POPSnet-SGP) campaign has demonstrated that a network of nearly autonomous aerosol instruments operating at ambient temperature and relative humidity (with low measurement error) may be used to quantify measurement representation error and investigate the factors introducing heterogeneity in aerosol distributions across a rural, continental background region. Measurements were made using Portable Optical Particle Spectrometer (POPS) instruments at several sites for five months across the Department of Energy’s Aerosol Radiation Measurement Southern Great Plains (ARM-SGP) User Facility in the central USA. Measurement representation error decreased with longer averaging periods (20-40 % between 1 sec and 1 day), varied between sites by 10 – 20 % for aerosol concentration 140 – 2500 nm in diameter (N_140), and was higher for aerosols > 400 nm in diameter (N_400). Our measurements also show the influence of local meteorology on aerosol surface area (A_140) and size distributions: A_140 is positively correlated with wind speed and relative humidity, negatively correlated with precipitation, and lower given westerly winds. Based on this study, we conclude that the POPSnet approach provides considerably more insight into the spatial variability in the aerosol population that can be used to constrain climate models than would be available from similar networks of PM 2.5 monitors.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Micro-patterning of spintronic emitters enables ultrabroadband structured terahertz radiation

Abstract Structured light beams offer promising properties for a variety of applications, but the generation of broadband structured light remains a challenge. New opportunities are emerging in the terahertz frequency range owing to recent progress in light-driven ultrafast vectorial currents through spatially patterning spintronic and optoelectronic systems.

43 PARTICLE ACCELERATORS↗

DOE OSTI2025

Renormalization group analysis of electromagnetic properties of the deuteron

The role of radiative corrections in low-energy nuclear physics is beginning to receive more scrutiny. We examine the impact of these corrections for the deuteron charge form factor and the radiative capture process np→dγ through the velocity renormalization group. In both cases, we find percent-level shifts in the relevant observables after evolving the subtraction velocity to the typical velocity of nucleons in the bound state. This suggests that electromagnetic corrections constitute a non-negligible source of uncertainty in existing few-body calculations.

Richardson, Thomas R↗

DOE OSTI2024

Image plate multi-scan response to fusion protons in the range of 1–14 MeV

Image plates (IPs) are a quickly recoverable and reusable radiation detector often used to measure proton and x-ray fluence in laser-driven experiments. Recently, IPs have been used in a proton radiography detector stack on the OMEGA laser, a diagnostic historically implemented with CR-39, or radiochromic film. The IPs used in this and other diagnostics detect charged particles, neutrons, and x-rays indiscriminately. IPs detect radiation using a photo-stimulated luminescence (PSL) material, often phosphor, in which electrons are excited to metastable states by ionizing radiation. Protons at MeV energies deposit energy deeper into the IP compared with x rays below ∼20 keV due to the Bragg peak present for protons. This property is exploited to discriminate between radiation types. Doses of mono-energetic protons between 1.7 and 14 MeV are applied to IPs using the MIT linear electrostatic ion accelerator. This paper presents the results from consecutive scans of IPs irradiated with different proton energies. The PSL ratios between subsequent scans are shown to depend on proton energy, with higher energy protons having lower PSL ratios for each scan. This finding is separate from the known energy dependence in the absolute sensitivity of IPs. The results can be compared to complimentary work on x rays, showing a difference between protons and x rays, forging a path to discriminate between proton and x-ray fluence in mixed radiation environments.

Instruments & Instrumentation↗

DOE OSTI2026

Spatial Correlations of the Poisson Model for Radiation Transport

Characterizing the relationship between bulk physical properties and mixing in randomly heterogeneous media is a central challenge across many areas of science and engineering. A benchmark model for such studies is the Poisson model, a random tessellation of space by a Poisson process of hyperplanes. In radiation transport studies, the lack of exact expressions for the Poisson model’s spatial multipoint functions has led to approximate methods being used, introducing unquantified sources of error. Here, we recently introduced an exact solution for the Poisson model’s multipoint functions and closely related conditional probability functions (CPFs), providing a new opportunity to understand and reduce these sources of error. In this paper, we enable a more rigorous investigation of radiation transport in stochastic media by applying the recently introduced exact solution for the Poisson model’s CPFs. This paper consists of three main contributions. First, we introduce a unified framework for CPFs of the Poisson model, encompassing the recently introduced exact CPFs as well as the previously introduced atomic mix, nearest-neighbor, and combination CPFs. This framework also includes existing pruning techniques for the approximate CPFs, such as angular exclusion, as well as a novel form of angular exclusion suitable for the exact CPFs. Second, we use the exact CPFs to characterize the spatial regions where each approximate three-point CPF is most accurate, thereby explaining the observed hierarchy of accuracy among the approximate models. Finally, we evaluate material transmittance, reflectance, and flux in a three-dimensional test problem using conditional point sampling, demonstrating the relationship between CPF accuracy and transport simulation accuracy.

Poisson model↗

DOE OSTI2021

Physics-Guided Machine Learning for Prediction of Cloud Properties in Satellite-Derived Solar Data: Preprint

With over 20 years of high-resolution surface irradiance data covering most of the western hemisphere, the National Solar Radiation Database (NSRDB) is a vital public data asset. The NSRDB uses a two-step Physical Solar Model (PSM) that explicitly considers the effects of clouds and other atmospheric variables on radiative transfer. High-quality physical and optical cloud properties derived from satellite imagery are perhaps the most important data input to the PSM, representing the greatest source of radiation attenuation and scattering. However, traditional methods for cloud property retrieval have their own limitations and are unable to accurately predict cloud properties outside of nominal conditions. We introduce a physics-guided neural network that can accurately predict cloud properties when traditional methods fail or are inaccurate. Using this framework, we show reductions in relative Root Mean Square Error (RMSE) for Global Horizontal Irradiance (GHI) up to 13 percentage points for timesteps that previously had missing or low-quality cloud property data. We expect that this methodology will be effective in improving the quality of cloud property and solar irradiance data in the NSRDB.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2023

Progress on Producing an ODS Ferritic Alloy by High Deformation Processing of Reactive Powders

Oxide dispersion-strengthened (ODS) ferritic alloys, such as 14YWT, are considered as benchmarks for fuel cladding and core structural materials in advanced nuclear energy reactor systems that require high temperature strength and creep properties as well as resistance to radiation damage. Unfortunately, the popular processing method of mechanical alloying (MA) is time-consuming, incurs high manufacturing costs, and typically produces anisotropy in the microstructure and mechanical properties of ODS ferritic alloys. These considerations hinder their acceptance in many high-performance, high-temperature materials for advanced nuclear energy reactors. This work package is pursuing an alternative solid-state processing to MA involving high deformation at high temperatures for producing an ODS ferritic alloy for fuel cladding. This report summarizes the concept for this processing method and the progress toward selecting the reactive and ferritic alloy powders, preparing 316L stainless steel cans for filling with blended powder followed by degassing, and choosing the heat treatments and forging parameters for performing the first two forging experiments. The preliminary results of optical microscopy performed on polished samples that were cut in three orthogonal directions revealed remnant porosity in both samples. The analysis of the porosity using ImageJ revealed a lesser amount of ~2.49% in the HiLoMe-1 sample that was processed with the three heat treatments and forging parameters compared to ~5.70% for the Hi-1 sample that was processed with only the first sintering heat treatment and forging parameter. These initial results will provide insights that can be leveraged to improve the densification of the powders in future forging experiments that will be continued into FY24 for determining the optimum heat treatments and forging parameters coupled with detailed microstructure characterization studies for producing the ODS ferritic alloy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Birefringent Color Filter by Layered Metal‐Organic Chalcogenides: In‐Plane Anisotropy and Odd/Even Effect

Anisotropic 2D materials are gaining interest recently as building blocks for angular‐dependent optical/electrical devices. However, the fundamental understanding of their structure‐property‐relationship is limited, which hinders further modulation of their unique characteristics via structure tailoring. Here the in‐plane structural anisotropy and the tunable optical/electrical properties of a series of radiation‐sensitive (X‐ray, e‐beam) metal‐organic chalcogenide (MOC) single crystals are comprehensively revealed with ligands of variable length/parity. Their monoclinic crystallography is determined at atomic resolution by a simple method that couples X‐ray/electron diffraction with first‐principles calculations. The in‐plane inorganic backbone of the MOCs exhibits a strong lattice anisotropy with odd/even alternations, which originates from that of the out‐of‐plane organic motifs via organic/inorganic accommodation. Such structural anisotropy is implied mechanically by the preferred orientation of crystal cleavage. It triggers a maximum ≈8 × distinction of in‐plane electrical conductivity of the semiconducting MOCs, plus a distinct birefringence (maximum Δn ≈ 0.03) with a dispersive orientation of dielectric axes, which rotate up to 25.7° from UV to visible‐light regime, inspiring an emerging pathway for color filtering via single crystal rotation. Such in‐plane optical characteristics also exhibit odd/even alternation and can be flexibly tuned by the designable out‐of‐plane ligands.

birefringence↗

DOE OSTI2022

Nuclear Structure and Decay Data for A=149 Isobars

Here, experimental nuclear structure and decay data are evaluated for all the 17 known nuclides of mass 149 (Xe, Cs, Ba, La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb). Detailed compiled and evaluated spectroscopic information is presented for each reaction and decay dataset, and recommended values are provided for level properties, α, β and γ radiations, and other spectroscopic parameters, based on an evaluation of all the available experimental data for A=149 isobaric nuclides. Although large amounts of nuclear spectroscopic data are available for nuclides of A=149, yet large gaps in knowledge exist, as described below. For the lowest atomic number nuclide 149 Xe, only the isotopic identification has been made, with no data for its ground-state half-life. For 149 Cs, 149 Tm and 149 Yb information is available for only the respective ground states. For 149 Ba, 149 La and 149 Er, limited data exist for excited states. Many of the decay schemes of radioactive nuclei of A=149 are considered as incomplete, either due to large energy differences between the highest observed excited states in daughter nuclides and the respective Q-values, or due to the lack of confirmed γ-ray data, as listed below: 149 Cs → 149 Ba, 149 Ba → 149 La, 149 La → 149 Ce, 149 Ce → 149 Pr, 149 Pr → 149 Nd, 149 Tb(4.17 min) → 149 Gd, 149 Ho(21.0 s and 56 s) → 149 Dy, 149 Er(4 s and 9.6 s) → 149 Ho, and 149 Tm → 149 Er. No data exist for the decay of 149 Yb to 149 Tm. Data for half-lives of the excited states in this mass chain are generally lacking as given below by the number of excited levels of known half-life / approximate number of known levels in a nuclide: 2/17 for 149 Ba, 0/18 for 149 La, 3/53 for 149 Ce, 3/44 for 149 Pr, 17/110 for 149 Nd, 9/90 for 149 Pm, 10/210 for 149 Sm, 2/125 for 149 Eu, 6/270 for 149 Gd, 5/200 for 149 Tb, 3/80 for 149 Dy, 3/90 for 149 Ho, and 3/14 for 149 Er. This work supersedes earlier evaluations of A=149 nuclides published by 2004Si16, 1994Si18, 1985Sz01 and 1976Ho17.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

A perspective on iron (Fe) in the atmosphere: air quality, climate, and the ocean

As scientists engage in research motivated by climate change and the impacts of pollution on air, water, and human health, we increasingly recognize the need for the scientific community to improve communication and knowledge exchange across disciplines to address pressing and outstanding research questions holistically. Our professional paths have crossed because our research activities focus on the chemical reactivity of Fe-containing minerals in air and water, and at the air-sea interface. (Photo)chemical reactions driven by Fe can take place at the surface of the particles/droplets or within the condensed phase. The extent and rates of these reactions are influenced by water content and biogeochemical activity ubiquitous in these systems. One of these reactions is the production of reactive oxygen species (ROS) that cause damage to respiratory organs. Another is that the reactivity of Fe and organics in aerosol particles alter surficial physicochemical properties that impact aerosol-radiation and aerosol–cloud interactions. Also, upon deposition, aerosol particles influence ocean biogeochemical processes because micronutrients such as Fe or toxic elements such as copper become bioavailable. We provide a perspective on these topics and future research directions on the reactivity of Fe in atmospheric aerosol systems, from sources to short- and long-term impacts at the sinks with emphasis on needs to enhance the predictive power of atmospheric and ocean models.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Thermokinetics of point defects in α-Fe 2 O 3

Abstract Point defect formation and migration in oxides governs a wide range of phenomena from corrosion kinetics and radiation damage evolution to electronic properties. In this study, we examine the thermodynamics and kinetics of anion and cation point defects using density functional theory in hematite ( α -Fe 2 O 3 ), an important iron oxide highly relevant in both corrosion of steels and water-splitting applications. These calculations indicate that the migration barriers for point defects can vary significantly with charge state, particularly for cation interstitials. Additionally, we find multiple possible migration pathways for many of the point defects in this material, related to the low symmetry of the corundum crystal structure. The possible percolation paths are examined, using the barriers to determine the magnitude and anisotropy of long-range diffusion. Our findings suggest highly anisotropic mass transport in hematite, favoring diffusion along the c -axis of the crystal. In addition, we have considered the point defect formation energetics using the largest Fe 2 O 3 supercell reported to date.

36 MATERIALS SCIENCE↗