SEARCH · Search NASA

Results for “rate structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Coma morphology and dust-emission pattern of periodic comet Halley. III - Additional high-resolution images taken in 1910

High-resolution photographic images of comet Halley obtained at Lick, Helwan, Lowell, and Vienna observatories during May-June 1910 are analyzed using the image-processing algorithm of Larson and Sekanina (1984). The results are presented in tables and compared with analyses of Mt. Wilson plates for the same period (Sekanina and Larson, 1984), and good general agreement is noted. Consideration is given to the position of the rotation pole, features indicative of the nucleus spin rate, the spokelike structure observed on May 21-22, and the expanding gas halo.

Larson, S. M.↗

NASA NTRS1985

Baroclinic instability of easterly jets with applications to the summer mesosphere

A two-dimensional numerical analysis of baroclinic instability waves in zonally and seasonally averaged wind fields in the summer mesosphere is presented. The analysis is based on the linearized quasi-geostrophic potential vorticity equation of Simmons and Moskins (1973). Solutions are obtained for the wave structure, wave growth rates, and wave periods on the basis of idealized and realistic data, and the results are compared with one-dimensional analyses. It is shown that the wavenumbers of peak growth with periods of 1.4-3 days were consistently lower for the two-dimensional analysis than for previous one-dimensional analyses. The possibility of detecting baroclinic instability in summer winds at 80-100 km by means of nadir-sounding satellite observations is discussed.

Pfister, L.↗

NASA NTRS1985

Status of advanced orbital transfer propulsion

A new Orbital Transfer Vehicle (OTV) propulsion system that will be used in conjunction with the Space Shuttle, Space Station and Orbit Maneuvering Vehicle is discussed. The OTV will transfer men, large space structures and conventional payloads between low earth and higher energy orbits. Space probes carried by the OTV will continue the exploration of the solar system. When lunar bases are established, the OTV will be their transportation link to earth. Critical engine design considerations based upon the need for low cost payload delivery, space basing, reusability, aeroassist maneuvering, low g transfers of large space structures and man rating are described. The importance of each of these to propulsion design is addressed. Specific propulsion requirements discussed are: (1) high performance H2/O2 engine; (2) multiple engine configurations totalling no more than 15,000 lbf thrust 15 to 20 hr life; (3) space maintainable modular design; (4) health monitoring capability; and (5) safety and mission success with backup auxiliary propulsion.

Cooper, L. P.↗

NASA NTRS1984

Power Sources Symposium, 31st, Atlantic City, NJ, June 11-14, 1984, Proceedings

The present conference on electrochemical power sources encompasses systems of such types as the thermoelectric, advanced rechargeable, lithium reserve, rechargeable, and nonrechargeable, nickel-cadmium and nickel-hydrogen rechargeable, lead-acid, nickel-zinc and nickel-iron rechargeable, nickel-cadmium and nickel-hydrogen rechargeable, and fuel cells. Attention is given to Si-Ge alloy multicouple technology, sodium-sulfur battery development status, the safety aspects of a rechargeable lithium C cell, fiber-structure electrodes for nickel-cadmium batteries, energy density improvements in Li/carbon monofluoride cells, zinc-air button cell technology, catalyzed cathodes for Li/SOCl2 cells, the effect of polymer structure on the rate capability of the lithium-iodine cell, and a methanol fuel cell powerplant.

Source record↗

NASA NTRS1986

Theories of mass loss from T Tauri stars

The available database on T Tauri stars is examined in order to develop criteria for modeling the physical processes occurring within and around pre-main sequence stars. Observational data on the temperature structures, mass loss rates, and mass motions in T Tauri envelopes are reviewed to form a basis for discussing the possible mechanisms for mass loss in the T Tauri objects. Analytical models are explored for thermally-driven, wave-driven and rotationally-driven winds. The possible interactions of the T Tauri stellar winds with processes occurring in the nearby FU Dri stars are noted, as is the necessity of momdeling physical processes such as turbulent velocity fields through accurate radiative transfer calculations in order to model the envelopes of the T Tauri stars.

Hartmann, L.↗

NASA NTRS1986

Triple interactions involving close binaries in globular clusters

The interaction of a circularized tidal binary system with a third star is studied statistically through the results of about 70,000 numerical scattering experiments. The stars involved are taken to be identical polytropes, with radii equal to one-third of the initial binary separation. The effects of nonzero stellar radii are included by calculating an approximation to the energy dissipated by tidal interactions and estimating the energy lost through physical collisions. These are then used to modify the interaction cross sections obtained in the point-mass approximation. It is found that, for a wide range of assumptions about the details of the triple interactions and the stars' structure, the net rate at which tidal binaries heat the stellar system is substantially reduced (by as much as a factor of 20) below that obtained when the binaries are treated simply as point masses. The most likely outcome of a triple encounter is the coalescence of two, or all three, of the stars involved.

Mcmillan, S. L. W.↗

NASA NTRS1986

Mode 1 delamination growth in adhesively bonded joints under static and fatigue loads

The objective of this investigation was to characterize the pure mode 1 delamination growth in metal to metal adhesively bonded joints under static and fatigue loading conditions, using FM 73 adhesive. Double cantilever beam specimens (DCB) were used for pure mode 1 tests. Aluminum 2024-T3 adherends were bonded with FM 73 adhesive. Delamination was introduced during fabrication by inserting a Teflon film between the two adherends. The mode 1 strain energy release rate G sub I sub c was obtained directly from static DCB tests conducted in accordance with the ASTM designation D1876-12. Constant amplitude fatigue tests on DCB specimens were conducted to determine the relationship between delamination growth rate da/dN and strain energy release rate G sub I sub c for a pure mode 1 delamination growth. It is found that the debond propagation rate in adhesive joints using FM 73 is more sensitive to errors in design load than is typical crack growth rate in metallic structures.

Biswas, S. C.↗

NASA NTRS1988

Radiative instabilities in sheared magnetic field

The structure and growth rate of the radiative instability in a sheared magnetic field B have been calculated analytically using the Braginskii fluid equations. In a shear layer, temperature and density perturbations are linked by the propagation of sound waves parallel to the local magnetic field. As a consequence, density clumping or condensation plays an important role in driving the instability. Parallel thermal conduction localizes the mode to a narrow layer where K(parallel) is small and stabilizes short wavelengths k larger-than(c) where k(c) depends on the local radiation and conduction rates. Thermal coupling to ions also limits the width of the unstable spectrum. It is shown that a broad spectrum of modes is typically unstable in tokamak edge plasmas and it is argued that this instability is sufficiently robust to drive the large-amplitude density fluctuations often measured there.

Drake, J. F.↗

NASA NTRS1989

Magnetohydrodynamic instabilities in coronal arcades

The MHD stability of coronal arcades is studied with and without a detached flux using a two-dimensional linear MHD stability numerical model. Two-dimensional magnetohydrostatic equilibria with and without gravity are computed. A coronal arcade without a detached flux tube is found to be stable for any magnetic shear and for any longitudinal mode. On the other hand, an arcade with a detached flux tube is unstable for perturbations with nonzero longitudinal wave number n and the instability mode structure and growth rate vary depending on the field twist and n. All the equilibria studied are stable to n = 0 perturbations. Gravity has a stabilizing effect on the equilibria. As the ratio lambda of the standard arcade width to the gravitational scale height increases from zero to 0.2, the m = 0 transverse mode growth rate decreases, but high m modes are stabilized. The equilibria studied here are completely stabilized for lambda larger than 0.33.

An, Chang-Hyuk↗

NASA NTRS1989

Magnetic fields in the accretion disks of cataclysmic variables

The radial transport of magnetic flux in CV accretion disks is considered. Turbulent diffusion in a disk with finite outer radius Rd leads to decay of large-scale magnetic fields, as magnetic flux can leak out at the outer edge of the disk. Numerical computations of the decay rate and magnetic structure are presented. It is shown that the decay time is significantly shorter than the accretion time. Centrifugally driven winds may be possible from the outer parts of the disk, provided there exist efficient dynamo processes which regenerate the field.

Van Ballegooijen, A. A.↗

NASA NTRS1990

Satellite observations of instability in the middle atmosphere

Data from the Limb Infrared Monitor of the Stratosphere (LIMS) have been used to define zonally averaged basic-state temperature and zonal wind fields in the middle atmosphere for several periods during the winter of 1978-79. This basic state has been used to calculate the phase speeds, growth rates, and spatial structures of unstable modes using a linear, quasigeostrophic model. These results have been compared with temperature and ozone variance amplitudes from a spectral analysis of the same LIMS data. The comparison indicates that there is a close match between phase speeds for the most rapidly growing modes predicted by the model and phase speeds for statistically significant temperature and ozone variances. Both calculated and observed modes tend to be limited in latitudinal extent to a few tens of degrees and in vertical extent to about 10 km. These modes also tend to be nondispersive. Examples are given for the Southern Hemisphere near 0.25 mb (60 km) and for low latitudes of the Northern Hemisphere near 15 mb (30 km).

Elson, Lee S.↗

NASA NTRS1992

Compressible homogeneous shear: Simulation and modeling

Compressibility effects were studied on turbulence by direct numerical simulation of homogeneous shear flow. A primary observation is that the growth of the turbulent kinetic energy decreases with increasing turbulent Mach number. The sinks provided by compressible dissipation and the pressure dilatation, along with reduced Reynolds shear stress, are shown to contribute to the reduced growth of kinetic energy. Models are proposed for these dilatational terms and verified by direct comparison with the simulations. The differences between the incompressible and compressible fields are brought out by the examination of spectra, statistical moments, and structure of the rate of strain tensor.

Sarkar, S.↗

NASA NTRS1992

A generalized reusable guidance algorithm for optimal aerobraking

A practical real-time guidance algorithm was developed for guiding aerobraking vehicles in such a way that the maximum heating rate, the maximum structural loads, and the post-aeropass delta-V requirements (for post-aeropass orbit insertion) are all minimized. The algorithm is general and reusable in the sense that a minimum of assumptions are made, thus minimizing the number of gains and mission-dependent parameters that must be laboriously determined prior to a particular mission. A particularly interesting feature is that inplane guidance performance is tuned by simply adjusting one mission-dependent parameter, the bank margin; similarly, the out-of-plane guidance performance is turned by simply adjusting a plane controller time constant. Other objectives in the algorithm development are simplicity, efficiency, and ease of use. The algorithm is developed for, but not necessarily restricted to, a single pass mission and a trimmed vehicle with a bank angle modulation as the method of trajectory control. Guidance performance is demonstrated via results obtained using this algorithm integrated into an aerobraking test-bed program. Comparisons are made with numerical results from a version of the aerobraking guidance algorithm that was to be flown onboard NASA's aeroassist flight experiment (AFE) vehicle. Promising results are obtained with a minimum of development effort.

Dukeman, G. A.↗

NASA NTRS1992

Thermoviscoplastic analysis of engine cowl leading edge subjected to oscillating shock-shock interaction

A finite element thermoviscoplastic analysis method, which employs a unified constitutive model proposed by Bodner and Partom, is used to predict rate-dependent nonlinear structural behavior. The method is evaluated by predicting stress-strain behavior of a uniaxially loaded bar of nickel-based superalloy (B1900 + Hf) material. The method is used to predict the time-dependent thermoviscoplastic response of a B1900 + Hf leading edge subjected to oscillating shock-shock interaction loading. Viscoplastic analysis shows that the leading edge experiences significant plastic straining. The plastic region increases with cyclic loading in the high heat flux area.

Pandey, Ajay K.↗

NASA NTRS1991

Compressible homogeneous shear - Simulation and modeling

Sarkar, S.↗

NASA NTRS1992

In-situ release of solar wind gases from lunar soil

A concept is described which has the potential to perform the in situ heating of the lunar regolith in order to release the solar wind gases. The poor thermal conductivity of the lunar soil is increased approximately 100-fold by the introduction of an artificial hydrogen atmosphere at 1 atm pressure enclosed in an inflatable structure. The leakage rate of H2 through the soil is minimal because of the close-packed nature of the soil and the design and operation of the facility.

Wittenberg, Layton J.↗

NASA NTRS1993

Analysis of the anisotropic viscoplastic-damage response of composite laminates - Continuum basis and computational algorithms

The mathematical structure underlying the rate equations of a recently-developed constitutive model for the coupled viscoplastic-damage response of anisotropic composites is critically examined. In this regard, a number of tensor projection operators have been identified, and their properties were exploited to enable the development of a general computational framework for their numerical implementation using the Euler fully-implicit integration method. In particular, this facilitated (i) the derivation of explicit expressions of the (consistent) material tangent stiffnesses that are valid for both three-dimensional as well as subspace (e.g. plane stress) formulations, (ii) the implications of the symmetry or unsymmetry properties of these tangent operators from a thermodynamic standpoint, and (iii) the development of an effective time-step control strategy to ensure accuracy and convergence of the solution. In addition, the special limiting case of inviscid elastoplasticity is treated. The results of several numerical simulations are given to demonstrate the effectiveness of the schemes developed.

Saleeb, A. F.↗

NASA NTRS1950

Antiknock evaluation of hydrocarbons and ethers as aviation fuel components

The results of a NACA investigation conducted over a period of several years to evaluate the anti-knock characteristics of organic compounds are summarized. Included are data for 18 branched paraffins and olefins, 27 aromatics, and 22 ethers. The factors of performance investigated were blending characteristics, temperature sensitivity, lead response, and relation between molecular structure and antiknock ratings. Four engines were used.

Barnett, Henry C↗