Search NASA⌕ Search

SEARCH · Search NASA

Results for “repeater”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A resistance strain gage with repeatable and cancellable apparent strain for use to 800 C

A temperature compensated static strain gage, which is fabricated from palladium-13w/o chromium (Pd13Cr) alloy and a platinum (Pt) compensator, is being developed and was tested over a temperature range to 800 C at NASA-Lewis. The PdCr compensated strain gage has significantly lower apparent strain to 800 C than other high temperature strain gages. The PdCr compensated gage is protected from oxidation by a flame-sprayed alumina-4w/o zirconia overcoating. Test results to 800 C indicate apparent strain variations of less than 300 micro-epsilon and reproducibility between thermal cycles within 50 micro-epsilon. Apparent strain of the coated PdCr compensated gage can be predicted and cancelled due to its reproducibility and low value.

Lei, Jih-Fen↗
NASA NTRS1991

Analysis of the individual risk of altitude decompression sickness under repeated exposures

In a case-control study, researchers examined the risk of decompression sickness (DCS) in individual subjects with higher number of exposures. Of the 126 subjects, 42 showed one or more episodes of DCS. Examination of the exposure-DCS relationship by odds ratio showed a linear relationship. Stratification analysis showed that sex, tissue ratio, and the presence of Doppler microbubbles were cofounders of this risk. A higher number of exposures increased the risk of DCS in this analysis.

Kumar, K. Vasantha↗
NASA NTRS1989

Ignition of nonmetallic materials by impact of high-pressure oxygen. II - Evaluation of repeatability of pneumatic impact test

The gaseous oxygen pneumatic impact test is used to evaluate the suitability of nonmetallic materials for use in high-pressure oxygen systems. The test was evaluated by testing the reactivity of four materials over a range of impact pressures. The evaluation also investigated the effect of valve opening time and other test variables on the frequency of reaction. The variability of the data obtained for each test material was too large for the test method to be capable of distinguishing other than gross differences in the reactivity of materials. No relation was found between this variability and changes in valve opening time and other test variables. The materials studied were found to be unacceptable for use as reference standards. Because of the high variability of the test data, it is recommended that new methods be developed for evaluating the suitability of materials for use in high-pressure oxygen systems.

Schmidt, Naomi↗
NASA NTRS1989

The durability of graphite/epoxy laminate subjected to repeated low velocity impact

Low velocity impact has been considered as quasi-static loading, as the dynamic effects are decaying before the pressure reaches its maximum. However, when the impact energy is low enough as not to cause visible damage, the dynamic effect at the beginning of the impact may cause internal damage to the laminate. Laminates were loaded quasi-statically and by impact to the same bending strain and with the same indenter shape several times. The laminates that were subjected to the impact loading failed much more rapidly. Analysis of the problem shows that the stress waves created by the impact at the beginning of contact intensify the damage zone created by the preceding impact until the final failure occurs.

Rotem, A.↗
NASA NTRS1990

A resistance strain gage with repeatable and cancellable apparent strain for use to 1500 F

A temperature compensated static strain gauge, which is fabricated from Pd13Cr alloy and a Pt compensator, is being developed and has been tested over a temperature range to 1500 F at NASA-Lewis. The PdCr compensated strain gage has significantly lower apparent strain to 500 F than other high temperature strain gages. The PdCr compensated gage is protected from oxidation by a flame-sprayed alumina-4 wt pct zirconia overcoating. Test Results to 1500 F indicate apparent strain variations of less than 250 micro-epsilon and reproducibility between thermal cycles within 50 micro-epsilon. The apparent strain of the coated PdCr compensated gage can be predicted and cancelled due to its reproducibility and low value.

Lei, Jih-Fen↗
NASA NTRS1990

Input/output system identification - Learning from repeated experiments

The paper describes three approaches and possible variations for the determination of the Markov parameters for forced response data using general inputs. It is shown that, when the parameters in the solution procedure are bootstrapped, the results can be obtained very efficiently, but the errors propagate throughout all parameters. By arranging the data in a different form and using singular value decomposition, the resulting identified parameters are more accurate, in the least number of successive experiments, at the expense of a large matrix singular value decomposition. When a recursive procedure is employed, the calculations can be performed very efficiently, but the number of repetitions of the experiments is much greater for a given accuracy than for any of the previous approaches. An alternative formulation is proposed to combine the advantages of each of the approaches.

Juang, Jer-Nan↗
NASA NTRS1992

Deconditioning Under Prolonged, Repeated Bed Rest

Cardiovascular deconditioning from prolonged bed rest not counteracted by mild exercise and requires at least 3 weeks for recovery, report contends. Involves more than simple decrease in volume of plasma; neurohumoral mechanisms, loss of mass of skeletal muscles, and general decrease of body's metabolic needs seem to be major contributors.

Sandler, Harold↗
NASA NTRS1992

Centimeter repeatability of the VLBI estimates of European baselines

In the last three years, the European Geodetic Very Long Baseline Interferometry (VLBI) Network has grown to a total of six fixed antennas placed in Germany, Italy, Spain and Sweden, all equipped with the standard geodetic VLBI instrumentation and data recording systems. During this period of time, several experiments have been carried out using this interferometer providing data of very high quality due to the excellent sensitivity and performance of the European stations. The purpose of this paper is to study the consistency of the VLBI geodetic results on the European baselines with respect to the different degrees of freedom in the analysis procedure. Used to complete this study were both real and simulated data sets, two different software packages (OCCAM 3.0 and CALC 7.4/SOLVE), and a variety of data analysis strategies.

Rius, Antonio↗
NASA NTRS1993

Surface velocity fields of Ice Streams D and E derived from repeat satellite imagery

Sequential Landsat TM images were used to map in detail the surface velocity of Ice Streams D and E by tracking small ice features in coregistered images. The majority of both ice streams have now been mapped for velocity, and in most areas, approximate strain-rates are also determined. Tracking was accomplished semiautomatically using an image-to-image cross-correlation technique. Measurement density is roughly four per sq km in regions with distinct surface features (crevasses, snow dunes, etc.), and with cloud-free image coverage.

Scambos, Ted A.↗
NASA NTRS1993

Recurrent burst activity from the soft gamma-ray repeater SGR 1900 + 14

Three short very soft gamma-ray (SGR) transient events from a location consistent with that of the SGR 1900 + 14, first described by Mazets et al. (1979), were detected by the Burst and Transient Source Experiment. The results of observations of the temporal and spectral properties of the SGR 1900 + 14 suggest that the SGR phase lasts at least 13 years, lending support to the suggestion by Kouveliotou et al. (1987) and Fishman et al. (1989) that SGRs are related to galactic (possibly population I) objects, perhaps neutron stars.

Kouveliotou, C.↗
NASA NTRS1941

Effect of alternately high and low repeated stresses upon the fatigue strength of 25S-T aluminum alloy

Fatigue tests were made on one lot of 3/4 inch diameter rolled-and-drawn 25S-T aluminum-alloy rod normal in composition and tensile properties. The specimens were tested at 3500 cycles per second in a rotating-beam fatigue test machine. Tests were made for three ratios (20:1, 50:1, and 200:1) of the number of cycles applied at low stress to the number applied at high stress. In general, failure occurred when the number of cycles at either the low or the high stress approached the ordinary fatigue curve for the material, regardless of the sequence in which the stresses were applied.

Stickley, G W↗