Search NASA⌕ Search

SEARCH · Search NASA

Results for “resins”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Streamlining and Simplifying the Chemical Separationof Berkelium (249Bk) from Other Actinides/Lanthanides andFission Products

Abstract Separation of an individual heavy actinide from other actinides, lanthanides, and coproduced fission products is challenging not only because of their similarity in chemistry but also because the chemistry of heavy actinides is largely unknown. At present, the cation-exchange chromatography with α-hydroxyisobutyric acid (CX-AHIB) method is used to isolate milli- to picogram quantities of heavy actinides (i.e., 249Bk, 252Cf, 254Es, and 257Fm). This method allows simultaneous separation of these actinides; however, isolating a clean individual product with a high yield has proven challenging. The process is also very slow and labor-intensive and requires precise control of various chemical conditions, such as pH, temperature, and AHIB concentration. Developing a separation scheme for heavy actinides requires identifying their unique feature and then harnessing this feature in the separation process design. The unique characteristic of Bk4+ is that it does not adsorb onto anion exchange resin columns, unlike other tetravalent actinides. This article discusses what makes Bk unique and how this discovery led to a new method for separating Bk from adjacent actinides, lanthanides, and coproduced fission products. The method employed two different resin columns in tandem to separate unwanted actinides from 249Bk, followed by fine cleanup of 249Bk. The advantages of the new Bk method over the CX-AHIB method in Bk production are discussed, and the performance and robustness of the proposed method were assessed in two recent production campaigns.

Chemistry↗
DOE OSTI2023

Direct Extraction of Sodium Hydroxide by Calix[4]pyrrole-Based Ion-Pair Receptors

Here, described in this work, are calix[4]pyrrole-based ion-pair receptors, cis/trans-1 and cis/trans-2, designed for the extraction of sodium hydroxide. An X-ray diffraction analysis of a single crystal of the cis-1·NaOH isomer isolated from a mixture of cis/trans-1 revealed a unique dimeric supramolecular structure. An average dimer in toluene-d 8 solution was inferred on the basis of diffusion-ordered spectroscopy (DOSY). Support for the proposed stoichiometry came from density functional theory (DFT) calculations. The structural stability of the dimeric cis-1·NaOH complex in toluene solution was further confirmed by ab initio molecular dynamics (AIMD) simulation with explicit representation of solvent. Under conditions of liquid–liquid extraction (LLE), purified receptors cis- and trans-2 were both found to remove NaOH from a pH 11.01 aqueous source phase into toluene with extraction efficiencies (E%) of 50–60% when used equimolar to NaOH. However, in all cases, precipitation was observed. Complexities associated with precipitation could be avoided by immobilization of the receptors onto a chemically inert poly(styrene) resin by means of solvent impregnation. The use of solvent-impregnated resins (SIRs) eliminated precipitation in solution while retaining the extraction efficiency toward NaOH. This allowed both the pH and salinity of the alkaline source phase to be lowered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Chlorocobaltate-Enabled Selective Separation of CoCl 2 from Mixed Chloride and Nitrate Salts of Mn, Co, and Ni

Described here is the effect of anionic metalates─chlorocobaltate and nitratocobaltate─on the heat-driven separation of the critical element cobalt from potentially competing transition metal salts. Resins bearing the hexadentate glycolamide receptor L (PS-L) exhibit sorption capacities, Q = 1.33 mmol/g for CoCl 2 and Q = 0.66 mmol/g for Co(NO 3 ) 2 , as inferred from sorption isotherm studies. This trend runs counter to the typical Hofmeister series for anion selectivity. Ion chromatographic analysis of a mixed CoCl 2 /Co(NO 3 ) 2 solution revealed an increase in chloride content from 55 mol % to 90 mol % after a single thermally driven catch-and-release cycle. This chloride-selective behavior was recapitulated in a mixed-metal cation, mixed-anion system containing the chloride and nitrate salts of Mn(II), Co(II), and Ni(II) at near-equimolar concentrations. PS-L also displayed enhanced selectivity for Co using this mixed stock solution as observed by ICP-OES. In contrast, for a nitrate-only solution containing Mn(II), Co(II), and Ni(II), PS-L showed increased affinity for Mn, with its proportion rising from 36.6 mol % to 58.1% after a single catch-and-release cycle. Density functional theory calculations support the suggestion that the enhanced uptake of Co(II) in chloride-rich media arises from the high thermodynamic stability of [CoCl 4 ] 2– , which facilitates its outer-sphere coordination to cationic resin-bound cobalt species. Single crystal X-ray crystallographic analyzes of L•MCl 2 (M = Mn, Co, Ni) and L•M(NO 3 ) 2 (M = Mn, Co) confirmed metal complexation by L in the solid state and the concomitant formation of metalate counteranions. Here, the present study highlights a relatively simple approach for separating cobalt from its transition metal congeners.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Additive manufacturing of carbon fiber-reinforced thermoset composites via in-situ thermal curing

Fiber-reinforced polymer composites are lightweight structural materials widely used in the transportation and energy industries. Current approaches for the manufacture of composites require expensive tooling and long, energy-intensive processing, resulting in a high cost of manufacturing, limited design complexity, and low fabrication rates. Here, we report rapid, scalable, and energy-efficient additive manufacturing of fiber-reinforced thermoset composites, while eliminating the need for tooling or molds. Use of a thermoresponsive thermoset resin as the matrix of composites and localized, remote heating of carbon fiber reinforcements via photothermal conversion enables rapid, in-situ curing of composites without further post-processing. Rapid curing and phase transformation of the matrix thermoset, from a liquid or viscous resin to a rigid polymer, immediately upon deposition by a robotic platform, allows for the high-fidelity, freeform manufacturing of discontinuous and continuous fiber-reinforced composites without using sacrificial support materials. This method is applicable to a variety of industries and will enable rapid and scalable manufacture of composite parts and tooling as well as on-demand repair of composite structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Characterization of a mock up nuclear waste package using energy resolved MeV neutron analysis

Reliable radiographic methods for characterizing nuclear waste packages non-destructively (without the need to open containers) have the potential to significantly contribute to safe handling and future disposal options, particularly for legacy waste of unknown content. Due to required shielding of waste containers and the need to characterize materials consisting of light elements, X-ray methods are not suitable. Here, energy-resolved MeV neutron radiography is demonstrated as a first-of-its-kind application for non-destructive and remote examination of mock up nuclear waste packages from a safe position using time-of-flight techniques enabled by a novel event-mode imaging detector system. Energy-resolved neutron transmission spectra were measured spatially, permitting the detection of analogue materials to actual nuclear waste such as water, melamine, and ion exchange resin within a 2.54 cm wall thickness steel pipe. The results demonstrate the capability to locate the materials through this wall thickness by radiography and tomographic reconstruction, revealing detailed 3D distributions and structural anomalies. The method effectively detects residual water in ion exchange resin, highlighting its sensitivity to moisture content, a crucial parameter for nuclear waste characterization. Monte Carlo simulations are in agreement with the experimental findings, providing a pathway to simulate waste forms more difficult to tackle experimentally. This work paves the way to apply sub-nanosecond intense MeV neutron sources, such as laser-driven neutron sources under development, to nuclear waste characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Solvent-based plastic recycling technologies

Solvent-based recycling approaches are receiving industrial and academic interest for their ability to produce high-quality plastic resins from a variety of plastic waste sources without breaking the polymer chains. Here we highlight the development of solvent-based technologies, focusing on the underlying principles, techno-economic and life-cycle analyses, and commercialization. The basic steps in solvent-based recycling include plastic size reduction, plastic dissolution, filtration or centrifugation, and optional additional cleaning steps such as adsorption, precipitation and solvent removal. Impurities that build up in the solvent must also be removed. The goal of solvent-based technologies is to produce a high-quality resin without plastic contaminants or other added substances. Disadvantages of these solvent-based technologies are their physicochemical complexity and the difficulty in scaling up to achieve continuous operations with high polymer and solvent yields and throughputs. As a result, chemical engineering is thus critical in bringing solvent-based recycling technologies to market.

Chemical engineering↗
DOE OSTI2025

Real-time process monitoring and automated control for direct ink write 3D printing of frontally polymerizing thermosets

Additive manufacturing (AM) enables the fabrication of complex geometries, yet its application to thermosets remains limited by post-processing requirements. Frontal ring-opening metathesis polymerization (FROMP) offers a promising alternative, enabling energy-efficient, in situ curing of freestanding thermoset structures. This study presents a real-time process monitoring and automated control system for direct ink writing (DIW) of FROMP thermosets. By integrating thermochromic leuco dyes and computer vision, we enable real-time polymerization front tracking, allowing autonomous printing parameter adjustments for consistent geometries across resin formulations. The system’s accuracy was validated against manual tracking, demonstrating precise front velocity detection. Its adaptability was confirmed by printing freestanding mechanical springs with different resins, achieving consistent geometries and mechanical properties despite front velocity variations. These findings highlight the potential of automated DIW control for scalable, repeatable, and material-agnostic 3D printing of thermosets.

Mejia, Edgar Brian [Sandia National Laboratories (↗
DOE OSTI2022

A chemical approach for the future of PLA upcycling: from plastic wastes to new 3D printing materials

As the demand for PLA increases, post-consumer disposal strategies must be carefully considered. While we would love to embrace a bioplastic future, we also need to tread carefully. Though PLA is widely claimed to be biodegradable, full degradation often requires conditions not typically found in landfills or industrial composting. Therefore, it will negatively impact the environment if treated carelessly. Here, in this work, we report a simple PLA upcycling path to turn existing PLA wastes into new 3D printable materials within 48 hours. The ester bonds of PLA can be cleaved efficiently via aminolysis. The obtained monomeric compound was derivatized with methacrylic anhydride, which introduces double bonds and thus a cross-linkable monomer is obtained. In combination with a comonomer and initiator, a photocurable resin is produced. The resin can be fed into any commercially available photocuring 3D printer. The 3D printed parts derived from PLA wastes exhibit impressive performances with a tensile strength of 58.6 MPa, Young's modulus of 2.8 GPa, and glass transition at ~180 °C. Our work demonstrates a new route to active upcycling of PLA while minimizing the need for disposal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Antioxidant-induced transformations of a metal-acid hydrocracking catalyst in the deconstruction of polyethylene waste

Plastics are ideal for numerous applications, as driven by the development of complex formulations containing various additives to improve performance and processability. Unfortunately, chemical valorization strategies (e.g., catalytic deconstruction) often can be challenged by the presence of small-molecule additives, and quantification of the impact of these molecular constituents on upcycling processes remains elusive. Here, this dearth of information restricts catalyst design efforts to combine the robustness and performance necessary to improve plastics circularity. In this communication, we describe a systematic study of common plastics additives—phenolic antioxidants, and we quantify the relationship between additive content and deconstruction yields of high-density polyethylene (HDPE) over a platinum on tungstated zirconium (Pt/WO 3 /ZrO 2 ) hydrocracking catalyst. In the simplest case of a base (antioxidant- and slip agent-containing) HDPE resin versus a pure (additive-stripped) HDPE polymer, a two-fold decrease in the yield of gas and liquid products is noted for base HDPE resin. Furthermore, both antioxidant chemistry and concentration strongly impact conversion and individual product selectivities. Using infrared spectroscopy, we determine that antioxidants change the effective ratio of metal to acid sites (i.e., metal-acid balance) through reactions of phenols and/or other functional groups (e.g., acids, esters) with catalyst active sites. Overall, this work demonstrates the impact of one common set of additives on plastics deconstruction, and the analysis herein provides a blueprint for quantitatively assessing the effects of additives on plastics deconstruction processes and for evaluating the development of more robust catalytic strategies or more tolerable additive formulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chemical characterization of microplastic particles formed in airborne waste discharged from sewer pipe repairs

Microplastic particles are of increasing environmental concern due to the widespread uncontrolled degradation of various commercial products made of plastic and their associated waste disposal. Recently, common technology used to repair sewer pipes was reported as one of the emission sources of airborne microplastics in urban areas. This research presents results of the multi-modal comprehensive chemical characterization of the microplastic particles related to waste discharged in the pipe repair process and compares particle composition with the components of uncured resin and cured plastic composite used in the process. Analysis of these materials employs complementary use of surface-enhanced Raman spectroscopy, scanning transmission X-ray spectro-microscopy, single particle mass spectrometry, and direct analysis in real-time high-resolution mass spectrometry. Further, it is shown that the composition of the relatively large (100 μm) microplastic particles resembles components of plastic material used in the process. In contrast, the composition of the smaller (micrometer and sub-micrometer) particles is significantly different, suggesting their formation from unintended polymerization of water-soluble components occurring in drying droplets of the air-discharged waste. In addition, resin material type influences the composition of released microplastic particles. Results are further discussed to guide the detection and advanced characterization of airborne microplastics in future field and laboratory studies pertaining to sewer pipe repair technology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Large-scale computational polymer solubility predictions and applications to dissolution-based plastic recycling

Dissolution-based plastic recycling is a promising approach to separate and recover high quality pure polymer resins from multicomponent plastic waste by exploiting differences in polymer solubility. The design of a dissolution-based polymer recycling process requires the selection of appropriate solvent systems and operating temperatures to dissolve only target polymers. Determining these parameters experimentally is challenging due to the wide range of solvents and temperatures possible for a given set of target polymers. In this work, we report a computational scheme that employs molecular dynamics simulations and the Conductor-like Screening Model for Realistic Solvents to predict polymer solubilities. Using this scheme, we established a computational solubility database for 8 common polymers and 1007 solvents at multiple temperatures and measured selected solubilities experimentally to validate computational predictions. Analysis of functional groups within this large database then provides chemical heuristics relating the molecular structures of good and non-solvents for selected polymers. We further developed a tool that automates the selection of solvents for all possible sequences in which target polymers can be selectively dissolved to guide the design of dissolution-based plastic recycling processes. Here, we demonstrate the application of these methods via multiple experimental case studies of representative dissolution-based polymer recycling processes in which pure polymer resins were successfully recovered from physical mixtures of polymers.

42 ENGINEERING↗
DOE OSTI2024

The Effects of Polyolefin Structure and Source on Pyrolysis-Derived Plastic Oil Composition

Seven types of plastics were pyrolyzed in a fluidized bed reactor: post-consumer recycled (PCR) high-density polyethylene (HDPE), PCR polypropylene (PP), virgin resins of varying molecular weights of HDPE, virgin resins of low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and (PP). Pyrolysis produced non-condensable gases (C1-C3), liquid phase products (C4-C40), and solids (C40+ and chars), with alkane, alkene, alkadiene, aromatic, and multi-cycloaromatics as the predominant compounds. Polymer structure had the greatest impact on product distribution, with minimal influence from molecular weight. Branches in polyethylene (PE) acted as thermal defects initiating degradation. Higher branch density in PE led to increased concentrations of aromatics, branched alkanes, and internal alkenes. PP and PE exhibited distinct degradation mechanisms, with PP requiring less energy for decomposition and yielding more oil. Here, pyrolysis oil from PCR HDPE and PCR PP contained a higher proportion of branched compounds. Additives in PCR plastics may promote isomerization during pyrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Heterogenous catalysis for oxygen tolerant photoredox atom transfer radical polymerization and small-molecule dehalogenation

Heterogeneous photocatalysts (PCs) have garnered attention for their sustainability and cost-effectiveness. Despite the existence of various types of these PCs, their synthesis often involves complex, multi-step procedures and laborious purification. Herein, we propose a simple method for attaching small-molecule photocatalytic species onto crosslinked 3-D polymer networks as insoluble scaffolds to create robust heterogeneous PCs. The highly swellable poly(ethylene glycol)-based ChemMatrix (CM) resin, known for its amphiphilic properties and high functional group loading, facilitated the covalent immobilization of the photoredox dye Eosin Y (EY), but also streamlined functionalization with Ir( III ) complexes. The resulting heterogeneous CM-EY demonstrated efficient photocatalytic performance in open-to-air dual photoredox catalysis of atom transfer radical polymerization (photo-ATRP) under green light. This was confirmed by the well-controlled synthesis of polymers with molecular masses ranging from 20 kDa to 300 kDa and low dispersities. Furthermore, CM-EY exhibited excellent photostability and recyclability over multiple cycles of ATRP. The heterogeneous catalysis of photo-ATRP provided high temporal control and enabled benign conditions for synthesizing protein-polymer hybrids (PPH). When combined with the initiator-modified CM (CM-BIB), CM-EY facilitated the solid-phase synthesis of homopolymers and block copolymers with recyclable performance. However, the coordinatively bound Ir@CM showed decreased catalytic activity and efficiency toward photoredox dehalogenation due to the leaching of active species during recycling. This study highlights the advantages of the covalent linking of catalysts to solid supports over non-covalent interactions, underscoring the potential of functionalized polymer resin as a promising scaffold. Such an approach offers customization and tunability, presenting opportunities for innovation in green chemistry.

Kapil, Kriti↗
DOE OSTI2025

Material extrusion additive manufacturing of wood pulp-reinforced epoxy composites

Direct ink writing (DIW) is an extrusion-based form of 3D-printing that has gained popularity over the last decade. DIW uses thixotropic fluid extrusion to form a particular shape. In order to form stable structures, the rheology of the paste is important to allow for extrusion from the syringe, stability of the growing print, and prevention of unwanted seeping flow during jog moves. In this work, we use wood pulp as a bio-based filler that can provide shear thinning properties to the ink, which produces a stable ink for DIW processing. Additionally, the filler imparts improved mechanical and thermal performance compared to neat resin. The wood pulp provided the shear thinning behavior necessary for DIW printing, and pulp loadings greater than 6 wt%, provided sufficient yield stress so that the composite could self-support during printing. Nanoclay was utilized to further improve ink rheology and appearance to enable larger scale printing. Overall, this work showed successful DIW of an epoxy resin with a sustainable filler improving its stiffness and thermal properties and provides an avenue for further development of bio-based inks for DIW towards various applications.

Lamm, Meghan E. [Oak Ridge National Laboratory (OR↗
DOE OSTI2025

Minimum GHG emissions and energy consumption of U.S. PET and polyolefin packaging supply chains in a circular economy

There is a wide agreement on the urgency of transforming linear management of plastics towards a circular economy model. However, no clear pathways exist as to required recycling technologies involved and system-wide environmental impacts. This study explores such pathways in the U.S. for the most commonly used packaging plastics through a combination of mechanical and emerging advanced recycling technologies. A system optimization model aimed at minimizing environmental impacts was developed to determine optimal end-of-life (EOL) management and locations of existing and emerging U.S. recycling infrastructures. Our study includes material flows from virgin resin production through semi-manufacturing processes to existing EOL disposal and recycling processes. An optimized circular plastics packaging system achieved greenhouse gas (GHG) emission savings of up to 28% and cumulative energy demand (CED) savings of up to 46%, compared to the linear economy. Moreover, these savings of GHG emissions and CED impacts represent a reduction of 0.16% and 0.49% compared to annual U.S. GHG emissions and energy consumption in 2022, respectively. The optimal recycling rates and systems-level circularity ranged from 78–99% and 57–75%, respectively. Increased energy savings led to increased GHG emissions showing a potential trade-off between GHG emissions and energy. Analysis of 40 scenarios showed the importance of material collection distances, blend limit of mechanically recycled resins, process yields, and mandated recycling rates for achieving a sustainable circular economy of plastics.

09 - BIOMASS FUELS↗
DOE OSTI2024

Equation-of-state measured via x-ray phase contrast imaging for Epon 828/DEA epoxy

Epoxies are a broad class of polymer materials often used as adhesive, structural or binding materials. Epon 828 is an epoxy resin that can be polymerized with a variety of curing agents with the choice of curing agent potentially having an effect on the resulting epoxy polymer’s material properties. In this study, the dynamic behavior of Epon 828 epoxy resin cured with diethanolamine (DEA) is investigated through a series of tamped Richtmyer-Meshkov instability (RMI) experiments measured with x-ray phase-contrast imaging. The measured shock and particle velocities are combined with data in the literature to calibrate Mie-Grüneisen equations-of-state (EOS) for portions and combinations of the collective dataset. The calibrated Mie-Grüneisen EOS are validated against particle velocity profiles extracted from published literature using the Eulerian hydrocode CTH. Here, the Mie-Grüneisen EOS fit to only the tamped RMI experimental data presented here most closely follows the particle velocity profile in the published literature.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Coordination Chemistry and Stoichiometry of Extracted Diglycolamide Complexes of Lanthanides in Extraction Chromatography Materials

Industrial rare earth element (REE) separations predominantly utilize solvent extraction processes tailored toward conventional resources such as bastnäsite, monazite, and ion adsorption clays. Advances in diglycolamide (DGA) chemistry have shown effective extraction characteristics for REE separations. However, limitations associated with traditional DGA solvent extraction techniques, such as third-phase formation and gelling, have hindered commercial viability. By supporting DGA extractants on porous resins such as polystyrene divinyl benzene (PS-DVB), the desirable combination of solvent extraction selectivity and ease of operation of sorbent columns can be achieved. To design a low-cost model for such solid-supported DGAs, extraction characteristics as influenced by the underlying coordination chemistry must be explored to achieve efficient functional systems. Within this study, we report novel DGA resin materials, each incorporating one of the DGAs N,N,N’,N’-tetra-(1-octyl)-3-oxapentane-1,5-diamide (TODGA), N,N'-dimethyl-N,N'-dioctyl-3-oxapentane-1,5-diamide (DMDODGA), and 2,2'-oxybis(1-(3-(((2-ethylhexyl)thio)methyl)-4-methylpyrrolidin-1-yl)ethan-1-one) (DEHPDGA). The affinity of DGAs across the lanthanide (Ln) series was evaluated for both hydrochloric acid and nitric acid media with varying Ln feed concentrations to study distribution ratios and loading characteristics. Focusing on dysprosium, extended X-Ray Absorption Fine Structure (EXAFS) and density functional theory (DFT) calculations were also utilized to explore coordination chemistry and their effects on ligand performance. The general trend for both acid media resulted in DMDODGA having the highest extraction strength of all three DGAs at varying acid concentrations. Coordination-chemistry analysis supported by loading data, DFT calculations, and EXAFS results under forced loading conditions posited less than the expected 3:1 ligand-to-metal coordination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Recycling of multilayer plastic packaging materials by solvent-targeted recovery and precipitation

Many plastic packaging materials manufactured today are composites made of distinct polymer layers (i.e., multilayer films). Billions of pounds of these multilayer films are produced annually, but manufacturing inefficiencies result in large, corresponding postindustrial waste streams. Although relatively clean (as opposed to municipal wastes) and of near-constant composition, no commercially practiced technologies exist to fully deconstruct postindustrial multilayer film wastes into pure, recyclable polymers. Here, we demonstrate a unique strategy we call solvent-targeted recovery and precipitation (STRAP) to deconstruct multilayer films into their constituent resins using a series of solvent washes that are guided by thermodynamic calculations of polymer solubility. We show that the STRAP process is able to separate three representative polymers (polyethylene, ethylene vinyl alcohol, and polyethylene terephthalate) from a commercially available multilayer film with nearly 100% material efficiency, affording recyclable resins that are cost-competitive with the corresponding virgin materials.

36 MATERIALS SCIENCE↗