Search NASA⌕ Search

SEARCH · Search NASA

Results for “safety requirements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Strut Shaping of 34m Beam Waveguide Antenna for Reductions in Near-Field RF and Noise Temeperature

Struts shaping of the NASA's Deep Space Network (DSN) 34m Beam Waveguide (BWG) antenna has been implemented to reduce near-field RF exposure while improving the antenna noise temperature. Strut shaping was achieved by introducing an RF shield that does not compromise the structural integrity of the existing structure. Reduction in the RF near-field exposure will compensate for the planned transmit power increase of the antenna from 20 kW to 80 kW while satisfying safety requirements for RF exposure. Antenna noise temperature was also improved by as much as 1.5 K for the low elevation angles and 0.5 K in other areas. Both reductions of RF near-field exposure and antenna noise temperature were verified through measurements and agree very well with calculated results.

reflector↗
NASA NTRS2012

Combining System Safety and Reliability to Ensure NASA CoNNeCT's Success

Hazard Analysis, Failure Modes and Effects Analysis (FMEA), the Limited-Life Items List (LLIL), and the Single Point Failure (SPF) List were applied by System Safety and Reliability engineers on NASA's Communications, Navigation, and Networking reConfigurable Testbed (CoNNeCT) Project. The integrated approach involving cross reviews of these reports by System Safety, Reliability, and Design engineers resulted in the mitigation of all identified hazards. The outcome was that the system met all the safety requirements it was required to meet.

Havenhill, Maria↗
NASA NTRS2010

Preliminary Design of the Guidance, Navigation, and Control System of the Altair Lunar Lander

Guidance, Navigation, and Control (GN&C) is the measurement and control of spacecraft position, velocity, and attitude in support of mission objectives. This paper provides an overview of a preliminary design of the GN&C system of the Lunar Lander Altair. Key functions performed by the GN&C system in various mission phases will first be described. A set of placeholder GN&C sensors that is needed to support these functions is next described. To meet Crew safety requirements, there must be high degrees of redundancy in the selected sensor configuration. Two sets of thrusters, one on the Ascent Module (AM) and the other on the Descent Module (DM), will be used by the GN&C system. The DM thrusters will be used, among other purposes, to perform course correction burns during the Trans-lunar Coast. The AM thrusters will be used, among other purposes, to perform precise angular and translational controls of the ascent module in order to dock the ascent module with Orion. Navigation is the process of measurement and control of the spacecraft's "state" (both the position and velocity vectors of the spacecraft). Tracking data from the Earth-Based Ground System (tracking antennas) as well as data from onboard optical sensors will be used to estimate the vehicle state. A driving navigation requirement is to land Altair on the Moon with a landing accuracy that is better than 1 km (radial 95%). Preliminary performance of the Altair GN&C design, relative to this and other navigation requirements, will be given. Guidance is the onboard process that uses the estimated state vector, crew inputs, and pre-computed reference trajectories to guide both the rotational and the translational motions of the spacecraft during powered flight phases. Design objectives of reference trajectories for various mission phases vary. For example, the reference trajectory for the descent "approach" phase (the last 3-4 minutes before touchdown) will sacrifice fuel utilization efficiency in order to provide landing site visibility for both the crew and the terrain hazard detection sensor system. One output of Guidance is the steering angle commands sent to the 2 degree-of-freedom (dof) gimbal actuation system of the descent engine. The engine gimbal actuation system is controlled by a Thrust Vector Control algorithm that is designed taking into account the large quantities of sloshing liquids in tanks mounted on Altair. In this early design phase of Altair, the GN&C system is described only briefly in this paper and the emphasis is on the GN&C architecture (that is still evolving). Multiple companion papers will provide details that are related to navigation, optical navigation, guidance, fuel sloshing, rendezvous and docking, machine-pilot interactions, and others. The similarities and differences of GN&C designs for Lunar and Mars landers are briefly compared.

Lee, Allan Y.↗
NASA NTRS2015

Development and Capabilities of ISS Flow Boiling and Condensation Experiment

An experimental facility to perform flow boiling and condensation experiments in long duration microgravity environment is being designed for operation on the International Space Station (ISS). This work describes the design of the subsystems of the FBCE including the Fluid subsystem modules, data acquisition, controls, and diagnostics. Subsystems and components are designed within the constraints of the ISS Fluid Integrated Rack in terms of power availability, cooling capability, mass and volume, and most importantly the safety requirements. In this work we present the results of ground-based performance testing of the FBCE subsystem modules and test module which consist of the two condensation modules and the flow boiling module. During this testing, we evaluated the pressure drop profile across different components of the fluid subsystem, heater performance, on-orbit degassing subsystem, heat loss from different modules and components, and performance of the test modules. These results will be used in the refinement of the flight system design and build-up of the FBCE which is manifested for flight in late 2017-early 2018.

microgravity↗
NASA NTRS2017

An Elementary Algorithm for Autonomous Air Terminal Merging and Interval Management

A central element of air traffic management is the safe merging and spacing of aircraft during the terminal area flight phase. This paper derives and examines an algorithm for the merging and interval managing problem for Standard Terminal Arrival Routes. It describes a factor analysis for performance based on the distribution of arrivals, the operating period of the terminal, and the topology of the arrival routes; then presents results from a performance analysis and from a safety analysis for a realistic topology based on typical routes for a runway at Phoenix International Airport. The heart of the safety analysis is a statistical derivation on how to conduct a safety analysis for a local simulation when the safety requirement is given for the entire airspace.

White, Allan L.↗
NASA NTRS2018

Off-Nominal Planning for the Cryogenic Vacuum Test of the JWST Optical Telescope Element/Integrated Science Instrument Module at JSC

The cryogenic thermal vacuum/thermal balance test of the James Webb Space Telescope (JWST) combined Optical Telescope Element (OTE)/Integrated Science Instrument Module (ISIM), known as the OTIS, at the Johnson Space Center (JSC) Chamber A in 2017 was likely the most complex test ever performed by NASA for an unmanned mission. The test of the combined flight Optical Telescope and ISIM elements was prefaced by years of modifications to chamber facilities, and included three extensive precursor tests of non-flight and flight hardware to establish safe and optimal test operational procedures. One critical part of the test preparation was planning for off-nominal events that could arise, including appropriate responses. In some cases, assurance of personnel and payload safety required modification of original test hardware and procedures which had to be validated before the final test could begin. This planning proved especially prescient for the OTIS test, as Hurricane Harvey struck the Houston area during the test in August 2017, and consequences for the precious payload could have been severe. This paper describes the extent of the thermal off-nominal planning undertaken for the OTIS test, including including safing for hurricanes, and some real-life effects of Hurricane Harvey on the test conduct. Documentation of the consequences and mitigations for these events are discussed. The importance of off-nominal planning for future thermal vacuum/thermal balance tests is illustrated.

Off-Nominal Planning↗
NASA NTRS2016

Construction of Supersonic Flight Dynamics Test (SFDT-2) Vehicle Monte Carlo Splashdown Footprints for Use in Range Safety and Recovery Operations

The Low-Density Supersonic Dececlerator (LDSD) project performed the second test flight of a supersonic inflatable device (SIAD) and ring-sail parachute on June 8, 2015 over the Pacific Ocean west of Kauai. In order for recovery ships to quickly extract the test vehicle hardware from the ocean, and in the interest of safety to the population of the islands of Kauai and Nihau, statistical estimates of the splashdown location had to be performed. This paper describes the modeling assumptions used to generate the Monti Carlo splashdown trajectory simulation results and the use of the splashdown probability ellipses in support of satisfying range safety requirements.

Strauss, William D.↗
NASA NTRS2019

Flight Readiness of Mochii S: Portable Spectroscopic Scanning Electron Microscope Facility on the International Space Station (ISS)

The ISS (International Space Station) currently lacks the capability to image and chemically analyze nano-to-micron scale particles from numerous engineering systems. To identify these particles, we must wait for a re-entry vehicle to return them from low earth orbit for ground-based SEM (Scanning Electron Microscope) / EDS (Energy Dispersive X-Ray Spectroscopy) analysis. This may take months, potentially delaying the affected system. Having an EDS-equipped SEM (Mochii S) aboard the ISS will accelerate response time thereby enhancing crew and vehicle safety by rapid and accurate identification of microscopic threats, especially in time-critical situations.The Mochii S payload will be stationed in the Japanese Experiment Module (JEM) powered by 120 VAC (Volts Alternating Current) inverter and connected to station Ethernet and WiFi (Fig. 1). To date the Mochii S payload has undergone testing for command and data handling, power quality, flight vibration, and radiation testing at Johnson Space Center (JSC). Mochii's high-RPM (Revolutions Per Minute) rotating vacuum pumps and high voltage systems have been reviewed to meet safety standards by JSC (Johnson Space Center) Engineering. Topology of the system in the JEM module has been baselined by ISS Safety and JAXA (Japan Space Exploration Agency). Digital controls to and from ISS over Joint Station LAN (Local Area Network) uplink have been simulated and the latencies and data rates have been found to be sufficient for successful operation of the payload from ground.Transporting sensitive electron optical instruments aboard a rocket that sustains 7G acceleration for 8 minutes and then operating it the unique microgravity (micro-g) environment is no trivial matter. To meet strict safety requirements and increase robustness for mission success, over 500 unique verifications must be completed before the payload is certified for spaceflight. Two of which will be discussed in detail are: vibroacoustic testing and magnetic susceptibility shielding and validation.

Mochii↗
NASA NTRS2019

Space Technology Mission Directorate Game Changing Development Program Astrobee

The HET2/Astrobee project is developing a new free-flying robot to succeed the existing SPHERES facility as a guest science research platform and to perform IVA work on the ISS. Relevance: The project will increase the capabilities of robots to perform IVA/EVA work in space and will increase the efficiency of human explorers by allowing routine, repetitive work to be off-loaded to robots. Approach: The project conducted incremental design and development of a robotic free flyer that meets project, stakeholder, and ISS interface and safety requirements. Results: 3 free flyers are on-orbit. The first robot has been unpacked and has begun flying autonomously within the ISS under crew supervision. Commissioning activities to validate the system continue.

Astrobee↗
NASA NTRS2020

Run Time Assurance as an Alternate Concept to Contemporary Development Assurance Processes

NASA and the FAA sought industry research to identify and evaluate alternate concepts for assuring safety of airborne systems. This report documents a research effort focused on the evaluation of Run Time Assurance (RTA) as applied to a novel, airborne system architecture. The RTA pattern is applied to a case study focused on a notional integrated flight and propulsion control system for a DEP VTOL aircraft. During flight, while the high-automation algorithms are operating, the RTA system will monitor the aircraft state for any impending violation of safety requirements. When necessary, it will switch to the low-automation software to prevent such violations. Assurance practices for both baseline industry activities and the RTA approach were captured and compared to illustrate the required engineering design considerations, and possible advantages and disadvantages of each approach as part of this case study.

Eric M. Peterson↗
NASA NTRS2022

NASA Concept Vehicles and the Engineering of Advanced Air Mobility Aircraft

NASA is conducting investigations in Advanced Air Mobility (AAM) aircraft and operations. AAM missions are characterised by ranges below 300 nm, including rural and urban operations, passenger carrying as well as cargo delivery. Urban Air Mobility (UAM) is a subset of AAM and is the segment that is projected to have the most economic benefit and be the most difficult to develop. The NASA Revolutionary Vertical Lift Technology project is developing UAM VTOL aircraft designs that can be used to focus and guide research activities in support of aircraft development for emerging aviation markets. These NASA concept vehicles encompass relevant UAM features and technologies, including propulsion architectures, highly efficient yet quiet rotors, and aircraft aerodynamic performance and interactions. The configurations adopted are generic, intentionally different in appearance and design detail from prominent industry arrangements. Already these UAM concept aircraft have been used in numerous engineering investigations, including work on meeting safety requirements, achieving good handling qualities, and reducing noise below helicopter certification levels. Focusing on the concept vehicles, observations are made regarding the engineering of Advanced Air Mobility aircraft.

eVTOL↗
NASA NTRSDate not supplied

Assuring Safety-Critical Machine Learning Enabled Systems: Challenges and Promise

Machine learning is increasingly being used in safety-critical systems, where the public safety requires a rigorous assurance process. We shall outline how assurance processes work for conventional systems and identify the primary difficulty in applying them to machine learning enabled systems. We will then outline a path forward including identifying where considerable basic research remains.

machine learning↗
NASA NTRSDate not supplied

Overview of the High Reynolds Number Ascent Wind Tunnel Test of the Space Launch System at the National Transonic Facility

Transonic, high Reynolds number wind tunnel testing for the Space Launch System (SLS) ascent flight environment was conducted in the National Transonic Facility (NTF) at the NASA Langley Research Center from December 2019 to April 2021. The test was sponsored by the SLS Program and the NASA Engineering & Safety Center with the ob- jective of assessing and characterizing Reynolds number effects on the ascent aerodynamics of the SLS launch vehicle. The cryogenic test article was a 1.75%-scale representation of the SLS Block 1 Cargo configuration that was fabricated mostly out of stainless steel, but with several additive-manufactured components including the Solid Rocket Booster (SRB) attach brackets and the SRB nozzles. This was the first use of additive manufacturing on structural components of a cryogenic model in the NTF, therefore post-fabrication material testing and inspections were performed to satisfy safety requirements. Force & moment and surface pressure data were acquired for Mach numbers between 0.50 and 0.95 over a range of Reynolds numbers based on core stage diameter between 2x10^6 and a maximum of 40x10^6 corresponding to 45% of flight Reynolds number. Additionally, flow visualization data using Pressure Sensitive Paint were acquired with a focus on the SRB forward attach area, which is susceptible to Reynolds number sensitivity at transonic speeds. This pa- per provides an overview of the test campaign including details on the unique test article and the experimental setup and test execution. General test findings and observations are also presented, but the majority of the test results and data analyses are provided in a companion paper.

Space Launch System↗
NASA NTRSDate not supplied

Overview of the High Reynolds Number Ascent Wind Tunnel Test of the Space Launch System at the National Transonic Facility

Transonic, high Reynolds number wind tunnel testing for the Space Launch System (SLS) ascent flight environment was conducted in the National Transonic Facility (NTF) at the NASA Langley Research Center from December 2019 to April 2021. The test was sponsored by the SLS Program and the NASA Engineering & Safety Center with the ob- jective of assessing and characterizing Reynolds number effects on the ascent aerodynamics of the SLS launch vehicle. The cryogenic test article was a 1.75%-scale representation of the SLS Block 1 Cargo configuration that was fabricated mostly out of stainless steel, but with several additive-manufactured components including the Solid Rocket Booster (SRB) attach brackets and the SRB nozzles. This was the first use of additive manufacturing on structural components of a cryogenic model in the NTF, therefore post-fabrication material testing and inspections were performed to satisfy safety requirements. Force & moment and surface pressure data were acquired for Mach numbers between 0.50 and 0.95 over a range of Reynolds numbers based on core stage diameter between 2x10^6 and a maximum of 40x10^6 corresponding to 45% of flight Reynolds number. Additionally, flow visualization data using Pressure Sensitive Paint were acquired with a focus on the SRB forward attach area, which is susceptible to Reynolds number sensitivity at transonic speeds. This paper provides an overview of the test campaign including details on the unique test article and the experimental setup and test execution. General test findings and observations are also presented, but the majority of the test results and data analyses are provided in a companion paper.

Space Launch System↗
NASA NTRSDate not supplied

Operational Evaluation of NASA SPoRT Lightning Safety Applications for Impact Based Decision Support Services

The NWS Office in Huntsville is tasked with monitoring and predicting the threat for lightning within its County Warning Area. These impact-based decision support services (IDSS) are provided routinely for aviation operations, irregularly for large-scale, outdoor events, and can have varying safety requirements, such as proximity to location and duration. Lightning monitoring and prediction can require the rapid synthesis of a plethora of data, so products that make this process more efficient and effective are sought by the operational community. The Huntsville NWS Office benefits from close collaboration with the NASA SPoRT Center, which is developing several products to address these operational challenges in concentrated R2O/O2R efforts. One example of this is the StopLight product, which uses Geostationary Lightning Mapper (GLM) flash extent density (FED) to provide an easy-to-interpret visual aid of lightning occurring within the last 30 minutes. The StopLight product shows both the age and location of the last lightning flash within each GLM pixel, which can be particularly useful for IDSS with determining when to resume activities or operations that have been shut down due to lightning. This presentation highlights results of collaboration between NASA SPoRT and NWS Huntsville, including testing of the Stoplight product, and additional experimental products in development. A brief summary of the lightning products are provided while the main focus will discuss product evaluation and forecaster perspective during real-time weather watch activities to support aviation operations and events where IDSS was necessary.

Kristopher White↗
NASA NTRS2024

Design and Test of the Orion Crew Module Launch Abort System Hatch

The Orion spacecraft is part of NASA’s Artemis program to establish a permanent human presence on the lunar surface and further enable future crewed missions to Mars. One of the key safety features of Orion is the Launch Abort System (LAS) which pulls the Orion Crew Module (CM) away in the event of a launch vehicle malfunction. It was necessary to design a LAS hatch that allows for crew access to the CM during pad operations. This paper describes the background and evolution of the LAS hatch design, the features used to address the crew safety requirements, the testing challenges in preparation for the Artemis crewed missions, and lessons learned.

Hatch↗
NASA NTRSDate not supplied

End-User Assessment of the NASA SPoRT Lightning AI Product

The NASA Short-term Prediction Research and Transition (SPoRT) Center has begun to develop products to address operational challenges and enhance safety during the lifecycle of lightning activity, and conduct evaluations in concentrated R2O/O2R efforts. The product evaluated for this study is Lightning Artificial Intelligence (A.I.), which predicts the probability of lightning out to 15 minutes in advance and spatially maps it using filled color contours. Lightning A.I. uses reflectivity, differential reflectivity, and correlation coefficient data from a subset of radars within the NEXRAD network to generate lightning probabilities at approximately 2 km resolution. The domains, spanning 145 x 145 km are centered over NASA-affiliated centers across the CONUS and use radar data which are closest in proximity. Lightning A.I. was developed with intended use by emergency managers at NASA centers. However, National Weather Service (NWS) offices are also often tasked with monitoring and forecasting the threat for lightning within their County Warning Areas for various impact-based decision support services. These forecasts are typically provided for aviation operations and large-scale, outdoor events, which may have varying safety requirements for decision-making based on lightning proximity and recency. The NASA SPoRT center conducted an assessment of the operational uses of Lightning A.I by various collaborative NWS Offices from late July into early September. This assessment included feedback from participants on both the product itself as well as its accessibility within the new, interactive NASA SPoRT Lightning Viewer. This presentation will include background information about Lightning A.I. and highlight results from this assessment. The feedback from the assessment will be used to inform research on any necessary modifications to this and future lightning products to assist end users.

Kelley Murphy↗