Search NASA⌕ Search

SEARCH · Search NASA

Results for “severe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Strong-QCD Regime Measurement of the Proton’s Spin Structure

The theory of the strong force, Quantum Chromodynamics (QCD) remains one of the most important ways to understand the fundamental properties of ordinary matter. However, at low momentum transfer Q 2 , in the regime where the strong force becomes extremely strong, our understanding of QCD for ordinary nucleons becomes hazy. Several cutting edge theories such as Chiral Perturbation Theory (χPT) and Lattice QCD have provided valuable predictions in this regime, but Lattice QCD has not yet extended predictions of many important quantities to this kinematic region, and Chiral Perturbation Theory has faced several important disagreements with experimental data for the neutron over the last several decades. It is therefore of extreme importance to have a benchmark of experimental data in the low energy regime for the proton’s behavior, as a test of leading theories for the behavior of QCD in this regime. The E08-027 (g2p) experiment ran at Jefferson Lab in 2012 with the goal of collecting this valuable data, and though I was still completing my undergraduate studies at the time, I became involved in the analysis in 2015 and built on the previous work to complete it and analyze the exciting results. This experiment achieved a high precision measurement of the spin structure functions g1 and g2 for the proton, quantities which describe the internal spin structure of the proton. These measurements were taken in the valuable low Q 2 region described above, and used to extract several moments of these spin structure functions which can be directly compared to the cutting-edge predictions of Chiral Perturbation Theory. Though the experiment’s timeline was such that I didn’t have a chance to work directly on the experimental setup, I had the opportunity to acquire hands-on experience working on a polarized target at UNH which is very similar to the crucial polarized target used in the g2p experiment. Full details of the g2p experiment and my experimental work at the University of New Hampshire are presented in this thesis, as well as a detailed description of the analysis process and the exciting benchmark results, which serve as a direct test of all current and future theories of QCD in the low-Q 2 regime.

Ruth, David↗
DOE OSTI2020

Distribution Development for Residual Inventory at the New York West Valley Site - 20400

The New York State Energy Research and Development Authority (NYSERDA) is the owner of the Western New York Nuclear Service Center (WNYNSC), a 1,351 ha site located approximately 48 km south of Buffalo, New York. In 1962, Nuclear Fuel Services, Inc. (NFS) entered into Agreements with the Atomic Energy Commission and New York State to construct the first commercial reprocessing plant of nuclear fuel in the United States. NFS, a private company, built and operated the spent fuel reprocessing plant and waste disposal facilities, processing 640 Mg of spent nuclear fuel from 1966 to 1972 under an Atomic Energy Commission license. Nuclear fuel reprocessing operations ended in 1972 and never reopened, leaving behind radioactive and chemical wastes. Operations led to contamination in a number of facilities and locations. Some of that contamination has migrated from waste disposal zones to other layers, formations, and features on and off the WNYNSC. Phase I decommissioning activities are ongoing and involve the removal of a number of areas and structures that have been associated with contamination. The purpose of this work is to outline the approach for characterizing contamination not associated with disposed wastes, contaminated structures, or specific releases. In this work, the term, residual radiological activity, is used to describe environmental contamination that exists subsequent to the completion of Phase I decommissioning activities, that is not associated with disposed wastes, contaminated structures, or specific releases. Contamination from the Site was quantified relative to data that characterize the concentrations of radionuclides that exist in background. Background concentrations are those present in the area but having no influence from Site related activities. The existence of residual radiological activity that is elevated relative to background has the potential to contribute to future risks to human health and the environment. As a consequence, the residual inventory information is used to inform the West Valley Probabilistic Performance Assessment (PPA) model to characterize potential future risks to human health and the environment. The centralized West Valley Data Management System (DMS) was the source of information for the data assembled in this analysis. The DMS is a fairly large compilation consisting of thousands of records from investigation studies, with sample dates ranging from 1990 to present. Samples from monitoring wells, boreholes, geoprobe studies, surface water, surface soils, storm water outfalls, ventilation stack filters, plant and animal tissues, and more are included in the DMS. Results are typically reported in units of activity per unit volume. For the purpose of the analyses presented here, all results were converted into consistent units of pCi per unit volume. Since 1990, data have been collected from various locations across the WNYNSC at different times with varying frequency over the course of several decades. As a consequence, a number of potential issues can arise with respect to the assembly of a dataset that is deemed adequate for the characterization of residual radiological activity. These issues were assessed and resolved to the extent possible through careful consideration of the properties of the distributions. The intent was to use data which characterize the current state of the Site. Radionuclides can be designated to one of several groups depending on their origin. In this work the groups considered were 1) Naturally Occurring Radioactive Material (NORM), 2) fallout, and 3) Other (including power plant, medical research, etc). This grouping is a useful construct with respect to the interpretation of fixed laboratory results. For example, NORM radionuclides that exist within a decay chain should have approximately equivalent distributions of concentrations if they are representative of background conditions. Insights such as these can be used as a check to identify sample results that need to be further investigated or omitted due to issues associated with reported results from fixed laboratory analyses. This type of analysis provided a foundation for the assessment of the adequacy of sample results for use in subsequent components of an assessment. The general process for the assessment of residual radiological contamination at the Site consists of a sequence of several steps. First, for each analyte, several statistical tests were performed to assess the weight of evidence against the null hypothesis that the mean of the distribution of concentrations was equal to zero. If the mean of the distribution of concentrations for a given radionuclide was not found to be greater than zero, then it was removed from consideration as a component of the residual radiological contamination. If there was significant evidence to reject the hypothesis of the mean being equal to zero, the second step was to compare the distribution of the data from the Site to that of the corresponding background. A suite of tests was used to compare the distributions of the site and background data. The results of these tests were collectively used to determine if site data are elevated relative to background. The third step was to develop distributions using a Bayesian framework to characterize the distribution of mean of the increment present above background for each of the radionuclides. The Bayesian model implemented allowed for the comparison of site-specific records to background concentrations to better approximate contamination attributed to the Site. A final screening step was employed for radionuclides that exceed background. This screening step compared 95% upper confidence limits (UCLs) from the increment distribution developed in the previous step to the risk screening levels. This approach yields a list of analytes that were determined to be elevated relative to background.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI1993

Nuclear Safety [Vol. 34, No. 1, January-March 1993]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 1 An Integrated Regional Approach To Risk Management of Industrial Systems, S. Chakraborty and R. Stratton; 9 Annual Technical Meeting of the NRC Cooperative Severe Accident Research Program, E. G. Silver; ACCIDENT ANALYSIS: 13 Deterministic Severe Accident Criteria as Severe Accident Design Criteria and Policy for the New Production Reactor-Heavy Water Reactor, P. T. Rhoads; 20 Proposed Deterministic Severe Accident Criteria for the Heavy Water Reactor-New Production Reactor Containment, K. D. Bergeron, S. E. Slezak, and C. E. Leach; 33 Quasi-Static Core Liquid Level Depression and Long-Term Core Uncovery During a PWR LOCA, Y. Kukita, R. R. Schultz, H. Nakamura, and J. Katayama; 49 LIRA: An Advanced Containment System to Minimize the Accidental Radioactivity Releases, A. Turricchia; 63 Errata to “A Review of Hydrogen Production During Melt/Water Interaction in LWRs,” Vol. 33, No. 4; CONTROL AND INSTRUMENTATION: 64 The Nuplex 80+™ Advanced Control Complex from ABB Combustion Engineering, F. Ridolfo, D. Harmon, and K. Scarola; DESIGN FEATURES: 76 A Scheme for Passive Isolation of the Containment of a Reactor, A. K. Ghosh, V. V. Raj, and K. Kakodkar; 84 Utility Requirements for Safety in the Passive Advanced Light-Water Reactor, T. U. Marston, W. H. Layman, and G. Bockhold, Jr.; WASTE AND SPENT FUEL MANAGEMENT: 91 Activities Related to Waste and Spent Fuel Management, Compiled by M. D. Muhlheim and E. G. Silver; OPERATING EXPERIENCES: 103 Testing Deficiencies in Auxiliary Systems Feedwater Systems, J. D. Kueck; 110 Reactor Shutdown Experience, Compiled by J. W. Cletcher; 113 Selected Safety-Related Events, Compiled by G. A. Murphy; 115 Operating U.S. Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver; RECENT DEVELOPMENTS: 133 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 145 Reports, Standards, and Safety Guides, D. S. Queener; 150 Proposed Rule Changes as of Sept. 30, 1992; ANNOUNCEMENTS: 75 Harvard Short Course on Risk: Science, Assessment, and Management; 102 International Conference on Reactor Physics and Reactor Computations; 102 The Fourth International Conference on Nuclear Waste Reprocessing and Waste Management [RECOD ’94]; 132 International Symposium on the Radiological Exposure of the Population of the European Community from Radioactivity in the Mediterranean Sea [MARINA-MED]; 162 International High-Level Radioactive Waste Conference ‘Technology Integration—Above and Below”; 154 The Authors; 158 Indexes to Nuclear Safety, Volume 33.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Arbuscular mycorrhizal fungal response to fire and urbanization in the Great Smoky Mountains National Park

Wildfires are increasing in frequency and intensity as drier and warmer climates increase plant detrital fuel loads. At the same time, increases in urbanization position 9% of fire-prone land within the United States at the wildland–urban interface. While rarely studied, the compounded effects of urbanization and wildfires may have unknown synergistically negative effects on ecosystems. Previous studies at the wildland–urban interface often focus on aboveground plant communities, but belowground ecosystems may also be affected by this double disturbance. In particular, it is unclear how much fire and urbanization independently or interactively affect nutritional symbioses such as those between arbuscular mycorrhizal (AM) fungi and the majority of terrestrial plants. In November 2016, extreme drought conditions and long-term fire suppression combined to create a wildfire within the Great Smoky Mountains National Park and the neighboring exurban city of Gatlinburg, TN. To understand how the double disturbance of urbanization and fire affected AM fungal communities, we collected fine roots from the 5 dominant understory species in September 2018 at each of 18 sites spanning 3 burn severities in both exurban and natural sites. Despite large variation in burn severity, plant species identity had the largest influence on AM fungi. AM fungal colonization, richness, and composition all varied most among plant species. Fire and urbanization did influence some AM fungal metrics; colonization was lower in burned sites and composition was more variable among exurban locations. There were no interactions among burn severity and urbanization on AM fungi. Our results point to the large influence of plant species identity structuring this obligate nutritional symbiosis regardless of disturbance regime. Therefore, the majority of AM fungal taxa may be buffered from fire-induced ecosystem changes if plant community composition largely remains intact, plant species life history traits allow for AM fungal persistence after fire disturbance, and/or nearby undisturbed habitat can act as an inoculum source for recolonization following fires. Thus, it is critical to maintain natural, undisturbed habitats interspersed within the wildland–urban interface.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Thickness-Dependent Thermal Conductivity and Phonon Mean Free Path Distribution in Single-Crystalline Barium Titanate

Nanosized perovskite ferroelectrics are widely employed in several electromechanical, photonics, and thermoelectric applications. Scaling of ferroelectric materials entails a severe reduction in the lattice (phonon) thermal conductivity, particularly at sub-100 nm length scales. Such thermal conductivity reduction can be accurately predicted using the information of phonon mean free path (MFP) distribution. The current understanding of phonon MFP distribution in perovskite ferroelectrics is still inconclusive despite the critical thermal management implications. Here, high-quality single-crystalline barium titanate (BTO) thin films, a representative perovskite ferroelectric material, are grown at several thicknesses. Using experimental thermal conductivity measurements and first-principles based modeling (including four-phonon scattering), the phonon MFP distribution is determined in BTO. The simulation results agree with the measured thickness-dependent thermal conductivity. The results show that the phonons with sub-100 nm MFP dominate the thermal transport in BTO, and phonons with MFP exceeding 10 nm contribute ≈35% to the total thermal conductivity, in significant contrast to previously published experimental results. The experimentally validated phonon MFP distribution is consistent with the theoretical predictions of other complex crystals with strong anharmonicity. This work paves the way for thermal management in nanostructured and ferroelectric-domain-engineered systems for oxide perovskite-based functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Machine Learning Modeling for Accelerated Battery Materials Design in the Small Data Regime

Abstract Machine learning (ML)‐based approaches to battery design are relatively new but demonstrate significant promise for accelerating the timeline for new materials discovery, process optimization, and cell lifetime prediction. Battery modeling represents an interesting and unconventional application area for ML, as datasets are often small but some degree of physical understanding of the underlying processes may exist. This review article provides discussion and analysis of several important and increasingly common questions: how ML‐based battery modeling works, how much data are required, how to judge model performance, and recommendations for building models in the small data regime. This article begins with an introduction to ML in general, highlighting several important concepts for small data applications. Previous ionic conductivity modeling efforts are discussed in depth as a case study to illustrate these modeling concepts. Finally, an overview of modeling efforts in major areas of battery design is provided and several areas for promising future efforts are identified, within the context of typical small data constraints.

Sendek, Austin D.↗
DOE OSTI2025

Heterogeneity of the Dominant Causes of Performance Loss in End-of-Life Cathodes and Their Consequences for Direct Recycling

Recycling Li-ion batteries from electric vehicles is critical for reducing costs and supporting the development of a domestic battery supply chain. Direct recycling of cathodes, like LiNixMnyCozO2 (NMC), is attractive due to its low cost, energy use, and emissions compared to traditional recycling techniques. However, a comprehensive understanding of the active material properties at end-of-life is needed to guide direct recycling processes and the performance-dependent reuse applications. Here, NMC material from an end-of-life commercial pouch cell is characterized and bench-marked against pristine non-cycled counterparts with respect to capacity, impedance, crystallography, morphology, and microstructure to identify major degradation modes and understand variability in the end-of-life material. The spatial heterogeneity of each property throughout the cell is also quantified. While the degraded material demonstrated similar capacity as the pristine, its impedance and rate capability are severely diminished. Furthermore, samples from the periphery of the electrode layers showed more severe performance loss compared to samples extracted from central regions. The dominant culprit of performance loss is the material microstructure, where the magnitude of particle cracking showed the strongest correlation to the impedance components that are most unfavorably impacted. This work suggests severe cracks in cathode active materials are the primary challenge that direct recycling methods must overcome.

25 ENERGY STORAGE↗
DOE OSTI2020

Anatomical and hydraulic responses to desiccation in emergent conifer seedlings

Premise The young seedling life stage is critical for reforestation after disturbance and for species migration under climate change, yet little is known regarding their basic hydraulic function or vulnerability to drought. Here, we sought to characterize responses to desiccation including hydraulic vulnerability, xylem anatomical traits, and impacts on other stem tissues that contribute to hydraulic functioning. Methods Larix occidentalis , Pseudotsuga menziesii , and Pinus ponderosa (all ≤6 weeks old) were imaged using x‐ray computed microtomography during desiccation to assess seedling biomechanical responses with concurrently measured hydraulic conductivity ( k s ) and water potential ( Ψ ) to assess vulnerability to xylem embolism formation and other tissue damage. Results In non‐stressed samples for all species, pith and cortical cells appeared circular and well hydrated, but they started to empty and deform with decreasing Ψ which resulted in cell tearing and eventual collapse. Despite the severity of this structural damage, the vascular cambium remained well hydrated even under the most severe drought. There were significant differences among species in vulnerability to xylem embolism formation, with 78% xylem embolism in L. occidentalis by Ψ of −2.1 MPa, but only 47.7% and 62.1% in P. ponderosa and P. menziesii at −4.27 and −6.73 MPa, respectively. Conclusions Larix occidentalis seedlings appeared to be more susceptible to secondary xylem embolism compared to the other two species, but all three maintained hydration of the vascular cambium under severe stress, which could facilitate hydraulic recovery by regrowth of xylem when stress is relieved.

Miller, Megan L.↗
DOE OSTI2024

Positron emission tomography harmonization in the Alzheimer's Disease Neuroimaging Initiative: A scalable and rigorous approach to multisite amyloid and tau quantification

Abstract INTRODUCTION A key goal of the Alzheimer's Disease NeuroImaging Initiative (ADNI) positron emission tomography (PET) Core is to harmonize quantification of β‐amyloid (Aβ) and tau PET image data across multiple scanners and tracers. METHODS We developed an analysis pipeline (Berkeley PET Imaging Pipeline, B‐PIP) for ADNI Aβ and tau PET images and applied it to PET data from other multisite studies. Steps include image pre‐processing, refacing, magnetic resonance imaging (MRI)/PET co‐registration, visual quality control (QC), quantification of tracer uptake, and standardization of Aβ and tau standardized uptake value ratios (SUVrs) across tracers. RESULTS Measurements from 10,105 cross‐sectional and longitudinal Aβ and tau PET scans acquired in several studies between 2010 and 2024 can be processed, harmonized, and directly merged across tracers and cohorts. DISCUSSION The B‐PIP developed in ADNI is a scalable image harmonization approach used in several observational studies and clinical trials that facilitates rigorous Aβ and tau PET quantification and data sharing. Highlights Quantitative results from ADNI Aβ and tau PET data are generated using a rigorous, scalable image processing pipeline This pipeline has been applied to PET data from several other large, multisite studies and trials Quantitative outcomes are harmonizable across studies and are shared with the scientific community

Neurosciences & Neurology↗
DOE OSTI2022

COVID ‐19 outcomes in patients with cancer: Findings from the University of California health system database

Abstract Background The interaction between cancer diagnoses and COVID‐19 infection and outcomes is unclear. We leveraged a state‐wide, multi‐institutional database to assess cancer‐related risk factors for poor COVID‐19 outcomes. Methods We conducted a retrospective cohort study using the University of California Health COVID Research Dataset, which includes electronic health data of patients tested for severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) at 17 California medical centers. We identified adults tested for SARS‐CoV‐2 from 2/1/2020–12/31/2020 and selected a cohort of patients with cancer. We obtained demographic, clinical, cancer type, and antineoplastic therapy data. The primary outcome was hospitalization within 30d after the first positive SARS‐CoV‐2 test. Secondary outcomes were SARS‐CoV‐2 positivity and severe COVID‐19 (intensive care, mechanical ventilation, or death within 30d after the first positive test). We used multivariable logistic regression to identify cancer‐related factors associated with outcomes. Results We identified 409,462 patients undergoing SARS‐CoV‐2 testing. Of 49,918 patients with cancer, 1781 (3.6%) tested positive. Patients with cancer were less likely to test positive (RR 0.70, 95% CI: 0.67–0.74, p < 0.001). Among the 1781 SARS‐CoV‐2‐positive patients with cancer, BCR/ABL‐negative myeloproliferative neoplasms (RR 2.15, 95% CI: 1.25–3.41, p = 0.007), venetoclax (RR 2.96, 95% CI: 1.14–5.66, p = 0.028), and methotrexate (RR 2.72, 95% CI: 1.10–5.19, p = 0.032) were associated with greater hospitalization risk. Cancer and therapy types were not associated with severe COVID‐19. Conclusions In this large, diverse cohort, cancer was associated with a decreased risk of SARS‐CoV‐2 positivity. Patients with BCR/ABL‐negative myeloproliferative neoplasm or receiving methotrexate or venetoclax may be at increased risk of hospitalization following SARS‐CoV‐2 infection. Mechanistic and comparative studies are needed to validate findings.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Peanut allergy burden survey: Factors associated with health‐related quality of life in adolescents

Abstract Background Patients with peanut allergy (PA) experience significant burden of illness, which impacts health‐related quality of life (HRQoL), particularly in adolescence. There is a paucity of research evaluating drivers of HRQoL scores. Methods A prospective, online survey of adolescents with self‐reported, provider‐diagnosed PA completed from November 2018 to January 2019 was used to explore drivers of the real‐world impact of PA on HRQoL using the Pediatric Quality of Life Inventory 4.0 (PedsQL) and other measures. Univariate and multivariate analyses were used to identify potential factors associated with PedsQL scores and to understand the level of association. Results A total of 102 adolescents were included. The final model included 10 variables: race, reported strict peanut avoidance, satisfaction with prophylaxis, moderate‐to‐severe reaction within the past 12 months, touching peanut as cause of most severe reaction, fear of reaction, age, gender, comorbidities, and daily life limitations. In total, three items were shown to be strong predictors of the PedsQL total score including cause of severe reaction was touching peanut (yes), level of agreement with avoiding peanut (completely agree), and satisfaction with prophylaxis (not very much/not at all). Conclusions There is substantial heterogeneity in the impact of the burden of PA on PedsQL scores across patients. This indicates the importance of shared and individualized decision making for PA management to optimize outcomes and improve HRQoL.

McCann, William A.↗
DOE OSTI2024

Quantitative trait locus (QTL) mapping and transcriptome profiling identify QTLs and candidate genes associated with heat stress response during reproductive development in Camelina sativa

Camelina sativa (L.) Crantz is a low-input oilseed crop that has great potential in providing sustainable feedstock for biofuels and bioproducts. Climate change is threatening production of camelina with rising global temperatures. Elucidating the genetic response to high temperatures is essential for successful breeding of heat-tolerant camelina varieties. Here, we report a combinatorial approach to identifying candidate genes associated with heat stress by quantitative trait locus (QTL) mapping and comparative transcriptome profiling. A population of recombinant inbred lines (RILs) was grown in a controlled growth chamber under the high-temperature regimes for 14 days beginning at the onset of the reproductive stage. Several traits related to seed production were evaluated at maturity. The QTL analysis identified several regions with co-located traits on chromosomes 8, 10, and 12. Two RILs with contrasting phenotypic responses to heat stress were chosen for gene expression profiling via RNA sequencing. Multiple pathways and genes were found to be strongly affected by heat stress, and many genes expressed differently between the two RILs. Several genes identified within the QTL regions were considered strong candidates that may control heat tolerance during reproduction in camelina. These studies provide resources for future studies that may assist in improving the heat tolerance of camelina.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Multi‐year hydroclimatic droughts and pluvials across the conterminous United States

Abstract Time series of water‐year runoff for 2,109 hydrologic units (HUs) across the conterminous United States (CONUS) for the 1900 through 2014 period were used to identify drought and pluvial (i.e., wet) periods. Characteristics of the drought and pluvial events including frequency, duration, and severity were examined and compared. Additionally, a similar analysis was performed using gridded tree‐ring reconstructions of the Palmer Drought Severity Index (PDSI) for the period 1475 through 2005 to place the drought and pluvial characteristics determined using water‐year runoff for 1900 through 2014 in the context of multi‐century climate variability. The temporal and spatial variability of droughts and pluvials determined using runoff for the 1900 through 2014 period indicated that most drought events in the CONUS occurred before about 1970, whereas most pluvial periods occurred after about 1970. This change in the frequencies of drought and pluvial events around 1970 was largely related to an increase in fall (October through December) precipitation across much of the central United States. Also, the duration and severity of droughts and pluvials identified using runoff for the 1900 through 2014 period generally were not significantly different from the drought and pluvial characteristics identified using the PDSI for the 1475 through 2005 period.

McCabe, Gregory J.↗
DOE OSTI2021

Projecting climate change in South America using variable‐resolution Community Earth System Model: An application to Chile

Abstract We introduce variable‐resolution enabled Community Earth System Model (VR‐CESM) results simulating historical and future climate conditions at 28 km over South America and 14 km over the Andes. Three 30‐year simulations are performed: a historic (1985–2014), a near future (2030–2059), and an end‐century (2070–2099) simulation under the RCP8.5 scenario. Historic results compare favourably to several temperature and precipitation reanalysis products, though local biases are present, particularly during austral summer. Future simulations highlight broad warming patterns (+3–6°C by end‐century) and heterogeneous precipitation responses across South America that qualitatively agree with prior modelling efforts. Our results reveal that the interaction between temperature and precipitation changes produce shifts in several Köppen–Geiger climates. Notable changes include the near‐elimination of the Andean Tundra or Alpine climates, a 15% decrease in Tropical Rainforests and a Tropical Savannah expansion of 20%. To provide a regionally focused analysis of projected climate change and to illustrate the benefits of variable resolution modelling, we analyse changes in the magnitude and trend in seasonal and daily temperature and precipitation in Chile. We also examined several metrics [e.g., snow water equivalent (SWE), temperatures on wet days, and days below 0°C] to evaluate potential impacts of climate change on the Chilean cryosphere between the end‐of‐century and historic periods, finding wide‐ranging indications of cryospheric decline. These changes are interpreted through reductions in the timing (1–2.5 months earlier peak SWE) and magnitude (200–1,000 mm SWE decreases) of water stored as snow in the Andes, a 10–30% decrease in number of cool season wet days with temperatures below 1°C, and 50–200 fewer days (annually) with minimum temperatures below 0°C. Our aim in producing a high‐resolution dataset of climate projections from VR‐CESM is to support analyses of climate change throughout South America but especially in vulnerable montane regions and to provide additional results for comparison with previous, ongoing, and upcoming modelling efforts.

variable-resolution global climate models↗
DOE OSTI2023

Local element operations for curved simplex meshes

Summary Mesh optimization procedures are generally a combination of node smoothing and discrete operations which affect a small number of elements to improve the quality of the overall mesh. These procedures are useful as a post‐processing step in mesh generation procedures and in applications such as fluid simulations with severely deforming domains. In order to perform high‐order mesh optimization, these ingredients must also be extended to high‐order (curved) meshes. In this work, we present a method to perform local element operations on curved meshes. The mesh operations discussed in this work are edge/face swaps, edge collapses, and edge splitting (more generally refinement) for triangular and tetrahedral meshes. These local operations are performed by first identifying the patch of elements which contain the edge/face being acted on, performing the operation as a “straight‐sided one" by placing the high‐order nodes via an isoparametric mapping from the master element, and smoothing the high‐order nodes on the elements in the patch by minimizing a Jacobian‐based high‐order mesh distortion measure. Since the initial “straight‐sided guess” from the placement of the nodes via the isoparametric mapping frequently results in invalid elements, the distortion measure must be regularized which allows for mesh untangling for the optimization to succeed. We present several examples in 2D and 3D to demonstrate these local operations and how they can be combined with a high‐order node smoothing procedure to maintain mesh quality when faced with severe deformations.

Shi, A.↗
DOE OSTI2022

Detecting impacts of surface development near weather stations since 1895 in the San Joaquin Valley of California

Abstract Temperature readings observed at surface weather stations have been used for detecting changes in climate due to their long period of observations. The most common temperature metrics recorded are the daily maximum (TMax) and minimum (TMin) extremes. Unfortunately, influences besides background climate variations impact these measurements such as changes in (1) instruments, (2) location, (3) time of observation, and (4) the surrounding artifacts of human civilization (buildings, farms, streets, etc.) Quantifying (4) is difficult because the surrounding infrastructure, unique to each site, often changes slowly and variably and is thus resistant to general algorithms for adjustment. We explore a direct method of detecting this impact by comparing a single station that experienced significant development from 1895 to 2019, and especially since 1970, relative to several other stations with lesser degrees of such development (after adjustments for the (1) to (3) are applied). The target station is Fresno, California (metro population ~ 15,000 in 1900 and ~ 1 million in 2019) situated on the eastern side of the broad, flat San Joaquin Valley in which several other stations reside. A unique component of this study is the use of pentad (5-day averages) as the test metric. Results indicate that Fresno experienced + 0.4 °C decade −1 more nighttime warming (TMin) since 1970 than its neighbors—a time when population grew almost 300%. There was little difference seen in TMax trends between Fresno and non-Fresno stations since 1895 with TMax trends being near zero. A case is made for the use of TMax as the preferred climate metric relative to TMin for a variety of physical reasons. Additionally, temperatures measured at systematic times of the day (i.e., hourly) show promise as climate indicators as compared with TMax and especially TMin (and thus TAvg) due to several complicating factors involved with daily high and low measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Forest Structural Complexity and Biomass Predict First-Year Carbon Cycling Responses to Disturbance

The pre-disturbance vegetation characteristics that predict carbon (C) cycling responses to disturbance are not well known. To address this gap, we initiated the Forest Resilience Threshold Experiment, a manipulative study in which more than 3600 trees were stem girdled to achieve replicated factorial combinations of four levels (control, 45, 65, and 85% gross defoliation) of disturbance severity and two disturbance types (targeting upper or lower canopy strata). Applying a standardized stability framework in which initial C cycling resistance to disturbance was calculated as the first-year natural log response ratio of disturbance and control treatments, we investigated to what extent pre-disturbance levels of species diversity, aboveground woody biomass, leaf area index, and canopy rugosity—a measure of structural complexity—predict the initial responses of subcanopy light-saturated leaf CO 2 assimilation (A sat ), aboveground wood NPP (ANPP w ), and soil respiration (R s ) to phloem-disrupting disturbance. In the year following stem girdling, we found that above-ground C cycling processes, A sat and ANPP w , were highly resistant to increases in disturbance severity, while Rs resistance declined as severity increased. Disturbance type had no effect on first-year resistance. Pre-disturbance aboveground woody biomass, and canopy rugosity were positive predictors of ANPP w resistance and, conversely, negatively related to R s resistance. Subcanopy A sat resistance was not related to pre-disturbance vegetation characteristics. Stability of C uptake processes along with R s declines suggest the net C sink was sustained in the initial months following disturbance. Therefore, we conclude that biomass and complexity are significant, but not universal, predictors of initial C cycling resistance to disturbance. Moreover, our findings highlight the utility of standardized stability measures when comparing functional responses to disturbance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Bandwidth and Aliasing in the Microwave SQUID Multiplexer

The microwave SQUID multiplexer (μmux) has enabled higher bandwidth or higher channel counts across a wide range of experiments in particle physics, astronomy, and spectroscopy. The large multiplexing factor coupled with recent commercial availability of microwave components and warm electronics readout systems make it an attractive candidate for systems requiring large cryogenic detector counts. Since the multiplexer is considered for both bolometric and calorimetric applications across several orders of magnitude of signal frequencies, understanding the bandwidth of the device and its interaction with readout electronics is key to appropriately designing and engineering systems. Here we discuss several important factors contributing to the bandwidth properties of μmux systems, including the intrinsic device bandwidth, interactions with warm electronics readout systems, and aliasing. Further, we present simulations and measurements of μmux devices coupled with SLAC Microresonator RF (SMuRF) tone-tracking electronics and discuss several implications for future experimental design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗