Search NASA⌕ Search

SEARCH · Search NASA

Results for “solar diffuser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

New mounting improves solar-cell efficiency

Method boosts output by about 20 percent by trapping and redirecting solar radiation without increasing module depth. Mounted solar-cell array is covered with internally reflecting plate. Plate is attached to each cell by transparent adhesive, and space between cells is covered with layer of diffusely reflecting material. Solar energy falling on space between cells is diffused and reflected internally by plate until it is reflected onto solar cell.

Shepard, N. F., Jr.↗
NASA NTRS1972

A model for Jupiter's proton radiation belt

A model for electron and proton energy and density in Jupiter's radiation belt is proposed. It is assumed that electrons diffuse inward from the solar wind. The Davis and Chang diffusion model, in which there is a very steep L-shell dependence in density and energy, is scaled outwards from the peak of the belts at about 1.5 to 2 Jupiter radii to the magnetopause as defined by the magnetic moment. The energetic electron density is calculated to be one billionth of the density in the solar wind, and that is assumed to be the trapping ratio of Jupiter's synchrotron belts. It is further assumed that the same figures apply to protons. The flux density at 80 MHz was measured by the Culgoora ring to be identical to that at 3000 MHz, implying a constant flux density of the synchrotron source of over 20 or 30 to 1 in frequency. It is suggested that the synchrotron spectrum is flat over more than an order of magnitude of frequency. Jupiter is an enormous synchrotron source and has a strong magnetic field, causing long diffusion times for electrons in the magnetosphere.

Warwick, J.↗
NASA NTRS1987

A survey of the cosmic ray diurnal variation during 1973-1979. I - Persistence of solar diurnal variation. II - Application of diffusion-convection model to diurnal anisotropy data

An analysis of data obtained with the vertical underground muon telescope at Embudo, NM shows that the solar diurnal variation in cosmic ray intensity is a persistent phenomenon over the 1973-1979 period. Assuming that the daily fluctuations in the amplitude and phase of the diurnal variation are random perturbations about the mean vector, the relative magnitude of the random component is determined. In the second part, the Diffusion-Convection model of cosmic ray transport is applied to high rigidity particles detected at the earth in order to deduce the behavior of the heliospheric transport parameters between 1973 and 1979. It is suggested that the diurnal variation observed at Embudo during 1979 may require a contribution from the charged particle drifts.

Riker, J. F.↗
NASA NTRS1995

Diffusion lengths in irradiated N/P InP-on-Si solar cells

Indium phosphide (InP) solar cells are being made on silicon (Si) wafers (InP/Si) to take advantage of both the radiation-hardness properties of the InP solar cell and the light weight and low cost of Si wafers compared to InP or germanium (Ge) wafers. The InP/Si cell application is for long duration and/or high radiation orbit space missions. InP/Si cells have higher absolute efficiency after a high radiation dose than gallium arsenide (GaAs) or silicon (Si) solar cells. In this work, base electron diffusion lengths in the N/P cell are extracted from measured AM0 short-circuit photocurrent at various irradiation levels out to an equivalent 1 MeV fluence of 1017 1 MeV electrons/sq cm for a 1 sq cm 12% BOL InP/Si cell. These values are then checked for consistency by comparing measured Voc data with a theoretical Voc model that includes a dark current term that depends on the extracted diffusion lengths.

Wojtczuk, Steven↗
NASA NTRS1985

The first three harmonics of solar daily variation caused by the diffusive propagation of galactic cosmic rays through the heliosphere

Some results for the first three harmonics derived from the simulation of diffusion convection of galactic cosmic rays is presented. Also, some dependences of the results to the modulation parameters are presented. The results are discussed in comparison with observations and with the former studies of higher order anisotropy. In addition to this, the existence is suggested of the IMF-sense-dependent anisotropy of higher order.

Munakata, K.↗
NASA NTRS1985

Diurnal anisotropy during solar activity cycle twenty and diffusion-convection model

Underground muon telescope data obtained at Embudo and Neutron monitor data obtained at Deep River are divided into two sets; one covers the ascending phase of the cycle (1965-70) and the other covers the descending phase (1971-76). The amplitude of diurnal anisotropy calculated from the data does not agree with the value predicted by the simplified version of the Diffusion-Convection Model (DCM); the discrepancy is worse for neutron data.

Ahluwalia, H. S.↗
NASA NTRS1991

Steady spherical hypercritical accretion onto neutron stars

The present study of hypercritical accretion flows onto neutron stars considers steady-state, spherically symmetric flows whose accretion rate range is characterized by the carrying away of gravitational-accretion energy by neutrinos. The models used encompass pair production, radiation diffusion, and general relativistic effects. While pair pressure dominates throughout the accretion envelope when accretion rates above about 100 solar masses/yr, radiation diffusion becomes important when the accretion rate falls below about 0.001 solar masses/yr. At the lower accretion rates, free fall toward the neutron-star surface stops and an extended, quasi-static, radiation pressure-supported envelope emerges which is probably dynamically unstable.

Houck, John C.↗
NASA NTRS1973

The generation and dissipation of solar and galactic magnetic fields.

Turbulent diffusion of magnetic field plays an essential role in the generation of magnetic field in most astrophysical bodies. Review of what can be proved and what can be believed about the turbulent diffusion of magnetic field. Observations indicate the dissipation of magnetic field at rates that can be understood only in terms of turbulent diffusion. Theory shows that a large-scale weak magnetic field diffuses in a turbulent flow in the same way that smoke is mixed throughout the fluid by the turbulence. The small-scale fields (produced from the large-scale field by the turbulence) are limited in their growth by reconnection of field lines at neutral points, so that the turbulent mixing of field and fluid is not halted by them. Altogether, it appears that the mixing of field and fluid in the observed turbulent motions in the sun and in the Galaxy is unavoidable. Turbulent diffusion causes decay of the general solar fields in a decade or so, and of the galactic field in 100 m.y. to 1 b.y. It is concluded that continual dynamo action is implied by the observed existence of the fields.

Parker, E. N.↗
NASA NTRS1985

Studies of humid continental haze during SPACE

A concept for a solar radiometer network to provide supporting data during the Satellite Preciptiation and Cloud Experiment (SPACE) was developed. Each of the 9 prime and 10 supplementary SPACE ground sites will be equipped with an upward pointing global solar pyranometer. About half of the sites will also be equipped with upward pointing diffuse (shade ring) solar pyranometers, and a downward pointing global albedo pyranometer. These radiometers will be used to monitor the spatial and temporal variability of solar insolation and haze optical depth. The insolation data will ultimately be input to numerical models of the pre-storm and near-storm boundary layer. The optical depth data will be compared with simultaneous measurements from airborne and satellite-based passive visible radiometers and airborne lidars.

Bowdle, D. A.↗
NASA NTRS2006

A New Empirical Thermospheric Density Model JB2006 using New Solar Indices

A new empirical atmospheric density model is developed using the CIRA72 (Jacchia 71) model as the basis for the diffusion equations. New solar indices based on orbit based sensor data are used for the solar irradiances in the extreme and far ultraviolet wavelengths. New exospheric temperature and semiannual density equations are employed to represent the major thermospheric density variations. Temperature correction equations are also developed for diurnal and latitudinal effects, and finally density correction factors are used for model corrections required at high altitude (1500-4000 km). The new model, Jacchia-Bowman 2006, is validated through comparisons of accurate daily density drag data previously computed for numerous satellite. For 400 km altitude the standard deviation of 16% for the standard Jacchia model is reduced to 10% for the new JB2006 model for periods of low geomagnetic storm activity.

Bowman, Bruce R.↗
NASA NTRS1982

Ash loading and insolation at Hanford, Washington during and after the eruption of Mount St. Helens

The effects of volcanic ash suspended in the atmosphere on the incident solar radiation was monitored at the Hanford Meteorological Station (HMS) subsequent to the major eruption of Mount St. Helens on May 18, 1980. Passage of the ash plume over Hanford resulted in a very dramatic decrease of solar radiation intensity to zero. A reduction in visibility to less than 1 km was observed, as great quantities of ash fell out of the plume onto the ground. Ash loading in the atmosphere remained very high for several days following the eruption, primarily as a result of resuspension from the surface. Visibilities remained low (2 to 8 km) during this period. Estimates of atmospheric turbidity were made from the ratio of diffuse-to-direct solar radiation; these turbidities were used to estimate extinction along a horizontal path, a quantity which can be related to visibility. Comparisons of observed and estimated visibilities were very good, in spite of the rather coarse approximations used in the estimates. Atmospheric clarity and visibility improved to near pre-eruption conditions following a period of rain showers. The diffuse-to-direct ratio of solar radiation provided a useful index for estimating volcanic ash loading of the atmosphere.

Laulainen, N. S.↗
NASA NTRS1978

Response of defects to illumination in silicon solar cells

The enhancement of diffusion length with intensity was examined using spectral response measurements in solar cells based on Silso silicon and EFG silicon ribbon. Local diffusion length variations at defect sites were investigated as a function of illumination level using a scanning electron microscope operated in the electron beam induced current mode. An increase of diffusion length was observed at defect sites as the intensity level was increased. The diffusion length improvements are explained on the basis of saturation of minority carrier traps in these materials. The trap distribution in Silso silicon is shown to be peaked near (Ec - 0.7)eV. EFG silicon ribbon shows a broad, Gaussian distribution of traps located near (Ec - 0.5)eV.

Hari Rao, C. V.↗
NASA NTRS1991

A comparative study of performance parameters of n(+)-p InP solar cells made by closed-ampoule sulfur diffusion into Cd- and Zn-doped p-type InP substrates

Preliminary results indicate that Cd-doped substrates are better candidates for achieving high efficiency solar cells fabricated by closed-ampoule sulfur (S) diffusion than Zn-doped substrates. The differences in performance parameters (i.e., 14.3 percent efficiency for Cd-doped vs. 11.83 percent in the case of Zn-doped substrates of comparable doping and etch pit densities) were explained in terms of a large increase in dislocation density as a result of S diffusion in the case of Zn-doped as compared to Cd-doped substrates. The In(x)S(y) and probably Zn(S) precipitates in the case of Zn-doped substrates, produce a dead layer which extends deep below the surface and strongly affects the performance parameters. It should be noted that the cells had an unoptimized single layer antireflective coating of SiO, a grid shadowing of 6.25 percent, and somewhat poor contacts, all contributing to a reduction in efficiency. It is believed that by reducing the external losses and further improvement in cell design, efficiencies approaching 17 percent at 1 AMO, 25 degrees should be possible for cells fabricated on these relatively high defect density Cd-doped substrates. Even higher efficiencies, 18 to 19 percent should be possible by using long-lifetime substrates and further improving front surface passivation. If solar cells fabricated on Cd-doped substrates turn out to have comparable radiation tolerance as those reported in the case of cells fabricated on Zn-doped substrates, then for certain space missions 18 to 19 percent efficient cells made by this method of fabrication would be viable.

Faur, Mircea↗
NASA NTRS1987

Solar cells in bulk InP using an open tube diffusion process

A simple open tube diffusion technique for the fabrication of n+p junction solar cells is described. Large area (greater than 0.25 square cm) solar cells have been made by this process with a photovoltaic conversion efficiency of 15.2 percent under simulated AMO illumination. An ideality factor is 1.04 and a saturation current density of 9.6 times 10 to the minus 16th power A/square cm have been observed for these cells. These are the lowest (best) values reported to date for diffused structures in bulk InP.

Parat, K. K.↗