Search NASA⌕ Search

SEARCH · Search NASA

Results for “speed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Wind tunnel investigation of the interaction and breakdown characteristics of slender wing vortices at subsonic, transonic, and supersonic speeds

The vortex dominated aerodynamic characteristics of a generic 65 degree cropped delta wing model were studied in a wind tunnel at subsonic through supersonic speeds. The lee-side flow fields over the wing-alone configuration and the wing with leading edge extension (LEX) added were observed at M (infinity) equals 0.40 to 1.60 using a laser vapor screen technique. These results were correlated with surface streamline patterns, upper surface static pressure distributions, and six-component forces and moments. The wing-alone exhibited vortex breakdown and asymmetry of the breakdown location at the subsonic and transonic speeds. An earlier onset of vortex breakdown over the wing occurred at transonic speeds due to the interaction of the leading edge vortex with the normal shock wave. The development of a shock wave between the vortex and wing surface caused an early separation of the secondary boundary layer. With the LEX installed, wing vortex breakdown asymmetry did not occur up to the maximum angle of attack in the present test of 24 degrees. The favorable interaction of the LEX vortex with the wing flow field reduced the effects of shock waves on the wing primary and secondary vortical flows. The direct interaction of the wing and LEX vortex cores diminished with increasing Mach number. The maximum attainable vortex-induced pressure signatures were constrained by the vacuum pressure limit at the transonic and supersonic speeds.

Erickson, Gary E.↗
NASA NTRS1991

The dependence of wind stress on wave height and wind speed

Three near-neutral boundary layer data sets were investigated with the aim of finding a dependence of wind stress on both wind speed and significant wave height. The data set most representative of open-ocean wave height, wind speed, and momentum flux conditions, was selected and analyzed by means of the least-squares method to produce a new parameterization for the wind stress as a function of both wind speed and significant wave height. This study shows that the wind stress, and consequently the drag coefficient, decreases with increasing wave height for a fixed wind speed. The study also shows that the curvature of the wind profile decreases with increasing wave height and that the C(DN) = A + BU-bar(10) form for the drag coefficient parameterization is inadequate. A drag coefficient that applies to both smooth and rough flows is proposed. These results are more applicable for open-ocean deep-water conditions and less applicable for sheltered, closed, shallow water sites.

Blake, Reginald A.↗
NASA NTRS1992

Future experimental needs in low-speed aerodynamics

This paper presents a review of future experimental needs in low-speed aerodynamic research. Emphasis is on fixed wind aircraft and the review uses the anticipated technical needs of subsonic transport aircraft and supersonic transport aircraft to establish and prioritize future low-speed experimental needs and directions. These technical needs, combined with a continuing improvement in computational capability, suggest changes in the experimental capabilities and adjustments in the use of existing capabilities. Three factors emerge that will have a major influence on the future directions for low-speed aerodynamic research: a recognition of the significance of three-dimensional high-lift aerodynamics, the increasing importance of aeroacoustics, and additional emphasis on the importance of propulsion/airframe integration. These analyses are combined with a review of the status of experimental capabilities in low-speed aerodynamic research to suggest future directions in the development and utilization of advanced instrumentation, test techniques, and test capabilities.

Olson, Lawrence E.↗
NASA NTRS1992

Low-speed cruise aerodynamics of the stopped rotor/disk rotorcraft concept

A low-speed wind tunnel test was completed in support of ongoing conceptual design studies of the Stopped Rotor/Disk rotorcraft concept. A one-fifth scale model was tested in the NASA Ames Low-Speed 7- by 10-Foot Wind Tunnel #1 to evaluate the low-speed cruise performance. The primary test objective was to compare performance characteristics for three possible conceptual designs of the Stopped Rotor/Disk cruise configuration: the large hub fairing (disk) alone, the disk/extended blades configuration, and the disk/conventional wing configuration. Results showed that the disk/extended blades configuration was the most efficient in low-speed cruise. Other test objecives included making parametric changes by varying the geometry of the disk and by varying the extended blade incidence angles. Studies were also conducted to examine the aerodynamic interaction between the disk and a conventional wing. An examination was made into the effects of the disk on static longitudinal stability. The wake generated by the disk impinged on a T-tail of the model and thus degraded longitudinal stability. Alternative tail geometries are required in order to improve the concept's static stability.

Swanson, Stephen M.↗
NASA NTRS1992

Relationship between wind speed and gas exchange over the ocean

A quadratic dependence of gas exchange on wind speed is employed to analyze the relationship between gas transfer and wind speed with particular emphasizing variable and/or low wind speeds. The quadratic dependence is fit through gas-transfer velocities over the ocean determined by methods based on the natural C-14 disequilibrium and the bomb C-14 inventory. The variation in the CO2 levels is related to these mechanisms, but the results show that other causes play significant roles. A weaker dependence of gas transfer on wind is suggested for steady winds, and long-term averaged winds demonstrate a stronger dependence in the present model. The chemical enhancement of CO2 exchange is also shown to play a role by increasing CO2 fluxes at low wind speeds.

Wanninkhof, Rik↗
NASA NTRS1992

High speed rotorcraft propulsion concepts to control power/speed characteristics

Recent NASA sponsored rotorcraft airframer studies have demonstrated the desire for constant power over a wide range of output speed for turboshaft propulsion systems. This study interrogated several different concepts aimed at maintaining constant power over a speed variation from 100-50 percent with minimum increase in fuel consumption. The baseline engine was an advanced technology 8000 shp, fixed turbine geometry, turboshaft engine. The concepts investigated included variable geometry turbines, variable geometry compressors, power transfer from the HP to LP shafts, counterrotating power turbine with a combiner gearbox, and variable speed transmission integrated with the baseline turboshaft engine. The concept that best satisfies the program objectives with superior engine performance and with the least technical risk is the baseline (fixed geometry turbines) turboshaft engine integrated with the variable speed transmission.

Bettner, J. L.↗
NASA NTRS1992

Wind tunnel performance results of swirl recovery vanes as tested with an advanced high speed propeller

Tests of swirl recovery vanes designed for use in conjunction with advanced high speed propellers were carried out at the NASA Lewis Research Center. The eight bladed 62.23 cm vanes were tested with a 62.23 cm SR = 7A high speed propeller in the NASA Lewis 2.44 x 1.83 m Supersonic Wind Tunnel for a Mach number range of 0.60 to 0.80. At the design operating condition for cruise of Mach 0.80 at an advance ratio of 3.26, the vane contribution to the total efficiency approached 2 percent. At lower off-design Mach numbers, the vane efficiency is even higher, approaching 4.5 percent for the Mach 0.60 condition. Use of the swirl recovery vanes essentially shifts the peak of the high speed propeller efficiency to a higher operating speed. This allows a greater degree of freedom in the selection of rpm over a wider operating range. Another unique result of the swirl recovery vane configuration is their essentially constant torque split between the propeller and the swirl vanes over a wide range of operating conditions for the design vane angle.

Gazzaniga, John A.↗
NASA NTRS1993

Variable-speed Generators with Flux Weakening

A cost-competitive, permanent-magnet 20 kW generator is designed such that the following criteria are satisfied: an (over) load capability of at least 30 kW over the entire speed range of 60-120 rpm, generator weight of about 550 lbs with a maximum radial stator flux density of 0.82 T at low speed, unity power factor operation, acceptably small synchronous reactances and operation without a gear box. To justify this final design four different generator designs are investigated: the first two designs are studied to obtain a speed range from 20 to 200 rpm employing rotor field weakening, and the latter two are investigated to obtain a maximum speed range of 40 to 160 rpm based on field weakening via the stator excitation. The generator reactances and induced voltages are computed using finite element/difference solutions. Generator losses and efficiencies are presented for all four designs at rated temperature of Tr=120C.

Fardoun, A. A.↗
NASA NTRS1993

Some aspects of the aeroacoustics of high-speed jets

Some of the background to contemporary jet aeroacoustics is addressed. Then scaling laws for noise generation by low-Mach-number airflows and by turbulence convected at 'not so low' Mach number is reviewed. These laws take into account the influence of Doppler effects associated with the convection of aeroacoustic sources. Next, a uniformly valid Doppler-effect approximation exhibits the transition, with increasing Mach number of convection, from compact-source radiation at low Mach numbers to a statistical assemblage of conical shock waves radiated by eddies convected at supersonic speed. In jets, for example, supersonic eddy convection is typically found for jet exit speeds exceeding twice the atmospheric speed of sound. The Lecture continues by describing a new dynamical theory of the nonlinear propagation of such statistically random assemblages of conical shock waves. It is shown, both by a general theoretical analysis and by an illustrative computational study, how their propagation is dominated by a characteristic 'bunching' process. That process associated with a tendency for shock waves that have already formed unions with other shock waves to acquire an increased proneness to form further unions - acts so as to enhance the high-frequency part of the spectrum of noise emission from jets at these high exit speeds.

Lighthill, James↗
NASA NTRS1993

Validation of Special Sensor Microwave Imager monthly-mean wind speed from July 1987 to December 1989

Since July 1987, the Remote Sensing Systems (Santa Rosa, California) routinely computes from first principles the wind speed from Special Sensor Microwave Imager (SSM/I) measurements of the intensity of microwave radiation emitted at the ocean surface. The accuracy of monthly-mean SSM/I wind speeds is determined by comparisons with moored-buoy wind measurements, which were recorded by four different institutions at 44 sites in the Atlantic and Pacific Oceans during July 1987 to December 1989. All results for 1988 were virtually identical with 1989. The range of monthly mean moored-buoy wind speeds was 2-10 m/s. The rms difference of 697 monthly-mean matchups of the composite 1988 and 1989 data set was 1.2 m/s. The rms differences were smaller in the equatorial zone and higher in middle latitudes, in accord with the monthly standard deviation. At middle latitudes, the time series of rms differences displayed an annual cycle. In the equatorial zone, the agreement between SSM/I and in situ data was better in regions with a lesser amount of clouds, and vice versa. For SSM/I monthly standard deviations of 1-2, 2-3, and 3-4 m/s, the average absolute values of the monthly-mean difference between SSM/I and moored-buoy wind speeds were 0.6, 0.9, and 1.4 m/s, respectively.

Halpern, David↗
NASA NTRS1993

SSMI wind speed measurements over the Southern Hemisphere oceans

The Special Sensor Microwave Imager (SSMI) carried by the USAF Defense Meteorological Satellite Program spacecraft correlates the intensity of microwave radiation emitted at the ocean surface with the 10-m height wind speed. The 4-year mean global features of the SSMI data were similar to the climatological-mean annual wind speed estimated from ship reports. Time series of area-weighted 60 deg S - zero deg monthly mean wind speeds indicated that the South Indian Ocean had the largest wind speeds throughout the year.

Halpern, David↗
NASA NTRS1926

NACA Flight-Path Angle and Air-Speed Recorder

A new trailing bomb-type instrument for photographically recording the flight-path angle and air speed of aircraft in unaccelerated flight is described. The instrument consists essentially of an inclinometer, air-speed meter and a film-drum case. The inclinometer carries an oil-damped pendulum which records optically the flight-path angle upon a rotating motor-driven film drum. The air-speed meter consists of a taut metal diaphragm of high natural frequency which is acted upon by the pressure difference of a Prandtl type Pitot-static tube. The inclinometer record and air-speed record are made optically on the same sensitive film. Two records taken by this instrument are shown.

Coleman, Donald G↗
NASA NTRS1928

The reaction on a float bottom when making contact with water at high speeds

Tests were conducted to investigate the possibility of a serious accident arising from unintentional contact with the water in substantially horizontal flight at high speed. Referring to vector diagrams on Figure 2, it will be seen that a very dangerous condition may arise if the float be allowed to come in contact with the water at high speeds as, for example, when flying at high speed just above the water. The initial diving moment due to suction and drag combined may be great enough to cause the seaplane to nose under before the pilot is able to control the motion. The same test data indicate clearly the existence of forces and moments tending to produce the phenomenon observed by Mr. Carroll (Technical Note No. 287) when the maneuver is carried out at lower speeds, as in a landing.

Richardson, H C↗
NASA NTRS1932

The Effect of Propellers and Nacelles on the Landing Speeds of Tractor Monoplanes

This paper reports wind-tunnel tests giving the lift coefficients of large-scale wing-nacelle combinations both with and without the propeller. The tests were made to show the effect of nacelles, and idling and stopped propellers on the landing speeds of tractor monoplanes. Four types of nacelles with various cowlings were used in numerous positions with respect to both a Clark Y and a thick airfoil. The effect of both the idling and stopped propeller on lift, and consequently on landing speed, was negligible. A nacelle with exposed engine cylinders when placed directly in front of an airfoil caused a slight reduction in lift, consequently an increase in landing speed, over the condition with the wing alone. With this exception no appreciable effect on landing speed was indicated for any of the other combinations.

Windler, Ray↗
NASA NTRS1952

A Low-speed Investigation of an Annular Transonic Air Inlet

Low-speed wind-tunnel tests were conducted as preliminary steps in the study of fuselage-air-inlet arrangements believed suitable for use at transonic speeds. The forward part of the model consisted of an NACA 1-85-050 cowling located at the base of the long protruding fuselage nose designed to maintain substream surface velocities everywhere ahead of the entrance and thereby to avoid or minimize adverse boundary-layer-shock interaction effects up to low supersonic speeds. Pressure-recovery and surface-pressure measurements are presented for the model with three fuselage nose shapes for ranges of angle of attack and inlet-velocity ratio useful for high-speed flight

AIR INLETS, SCOOPS↗
NASA NTRS1955

Estimation of Inlet Lip Forces at Subsonic and Supersonic Speeds

The effects of lip thickness on inlet performance are estimated as functions of mass flow for subsonic and supersonic flight speeds. At subsonic speeds, pressure-recovery losses and additive drag are shown to decrease linearly with increasing lip frontal area if the maximum suction force is attained. At supersonic speeds, inlet drag increases linearly with inlet lip frontal area at full mass flow. For reduced mass flow, some reduction in additive drag is possible with lips of moderate thickness, but the magnitude of this reduction becomes negligible as flight speed increases.

Moeckel, W E↗
NASA NTRS1957

Hydrodynamic characteristics over a range of speeds up to 80 feet per second of a rectangular modified flat plate having an aspect ratio of 0.25 and operating at several depths of submersion

Results of an investigation of the hydrodynamic characteristics over an extended speed range of a rectangular modified flat plate having an aspect ratio of 0.25 and operating at several depths of submersion are presented. Comparisons between these data and data over a lower speed range on a similar aspect-ratio-0.25 flat plate but having one-half the thickness are presented. These comparisons show no significant differences at the low speeds. At high speeds and high angles of attack, where extensive cavitation was present, the lift coefficients were lower than would have been indicated by the results of the previous investigations and the present investigation at the lower angles of attack. A brief discussion and comparison of ventilation are presented which shows two types of planing bubble formation and the effect of increasing the thickness of the model on the ventilation boundary.

REYNOLDS NUMBER EFFECTS - COMPLETE WINGS↗
NASA NTRS1952

Investigation of turbines suitable for use in a turbojet engine with high compressor pressure ratio and low compressor-tip speed I : turbine-design requirements for several engine operating conditions

In order to insure satisfactory turbine performance under five turbojet-engine operating conditions, turbine design requirements were determined for the following operating conditions: take-off, maximum thrust at altitude, altitude cruising at rated rotative speed, altitude cruising with maximum-thrust exhaust nozzle area, and engine acceleration at 80 percent equivalent design rotative speed. If cruising is to be at rated engine speed, both cruising and take-off should be considered in turbine design. Design requirements for the other conditions are nearly identical. Without compressor-exit bleed, a turbine cannot accelerate this compressor at 80 percent of rated speed; with 28.6-percent bleed, the design requirements are within those for take-off.

TURBINES--AXIAL FLOW↗