Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Crystal-chemistry of mullite-type aluminoborates Al{sub 18}B{sub 4}O{sub 33} and Al{sub 5}BO{sub 9}: A stoichiometry puzzle

Orthorhombic Al{sub 2}O{sub 3}-rich aluminoborate is an important ceramic material for which two slightly different compositions have been assumed: Al{sub 5}BO{sub 9} (5Al{sub 2}O{sub 3}:B{sub 2}O{sub 3}) and Al{sub 18}B{sub 4}O{sub 33} (9Al{sub 2}O{sub 3}:2B{sub 2}O{sub 3}). The formula Al{sub 18}B{sub 4}O{sub 33} (=Al{sub 4.91}B{sub 1.09}O{sub 9}) was derived from results of chemical analyses when crystal structure data were not yet available. Subsequent structural investigations indicated Al{sub 5}BO{sub 9} composition. Nevertheless, Al{sub 18}B{sub 4}O{sub 33} was still accepted as the correct stoichiometry assuming that additional B replaces 9% Al. Powder samples of both compositions and ones with excess boron were prepared by solid state reactions between {alpha}-Al{sub 2}O{sub 3} and B{sub 2}O{sub 3}/H{sub 3}BO{sub 3} at temperatures above 1100 {sup o}C and single-crystals were grown from flux at 1100 and 1550 {sup o}C. Products were investigated by single-crystal and powder XRD, {sup 11}B and {sup 27}Al solid-state MAS-NMR, Raman and FTIR spectroscopy as well as Laser-ablation ICP-MS. No indication of the predicted 9% B{yields}Al substitution was found. LA ICP-MS indicated 12.36(27) wt% B{sub 2}O{sub 3} corresponding to Al{sub 4.97}B{sub 1.03}O{sub 9}. Hence, the suggested Al{sub 18}B{sub 4}O{sub 33} stoichiometry can be excluded for all synthesized samples. A very low amount of Al vacancies at a five-fold coordinated site are likely, charge balanced by an additional nearby three-fold coordinated B site. All evidences indicate that the title compound should be reported as Al{sub 5-x}B{sub 1+x}O{sub 9} with x<0.038(6), which is close to Al{sub 5}BO{sub 9}. -- Graphical abstract: A chemical composition of Al{sub 18}B{sub 4}O{sub 33}=Al{sub 4.91}B{sub 1.09}O{sub 9}=9Al{sub 2}O{sub 3}:2B{sub 2}O{sub 3} has been assumed for mullite-type aluminoborate with Al{sub 5}BO{sub 9} structure. However, samples prepared by different routes showed compositions close to 5Al{sub 2}O{sub 3}:B{sub 2}O{sub 3}. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of homo-DNA and nature's choice of pentose over hexose in the genetic system

An experimental rationalization of the structure type encountered in DNA and RNA by systematically investigating the chemical and physical properties of alternative nucleic acids has identified systems with a variety of sugar-phosphate backbones that are capable of Watson-Crick base pairing and in some cases cross-pairing with the natural nucleic acids. The earliest among the model systems tested to date, (4{prime} {yields} 6{prime})-linked oligo(2{prime},3{prime}-dideoxy-{beta}-d-glucopyranosyl)nucleotides or homo-DNA, shows stable self-pairing, but the pairing rules for the four natural bases are not the same as those in DNA. However, a complete interpretation and understanding of the properties of the hexapyranosyl (4{prime} {yields} 6{prime}) family of nucleic acids has been impeded until now by the lack of detailed 3D-structural data. We have determined the crystal structure of a homo-DNA octamer. It reveals a weakly twisted right-handed duplex with a strong inclination between the hexose-phosphate backbones and base-pair axes, and highly irregular values for helical rise and twist at individual base steps. The structure allows a rationalization of the inability of allo-, altro-, and glucopyranosyl-based oligonucleotides to form stable pairing systems.

36 MATERIALS SCIENCE↗

Ambidextrous Helical Nanotubes from Self-Assembly of Designed Helical Hairpin Motifs

Tandem repeat proteins exhibit native designability and represent potentially useful scaffolds for the construction of synthetic biomimetic assemblies. We have designed two synthetic peptides, HEAT R1 and LRV M3Δ1, based on the consensus sequences of single repeats of thermophilic HEAT (PBS HEAT) and Leucine- Rich Variant (LRV) structural motifs, respectively. Self-assembly of the peptides afforded high aspect-ratio helical helical nanotubes. Cryo-electron microscopy with direct electron detection was employed to analyze the structures of the solvated filaments. Three dimensional reconstructions from the cryo-EM maps led to atomic models for the HEAT R1 and LRV M3Δ1 filaments at resolutions of 6.0 Å and 4.4 Å, respectively. Surprisingly, despite sequence similarity at the lateral packing interface, HEAT R1 and LRV M3Δ1 filaments adopt the opposite helical hand and differ significantly in helical geometry, while retaining a local conformation similar to previously characterized repeat proteins of the same class. The differences in the two filaments could be rationalized on the basis of differences in cohesive interactions at the lateral and axial interfaces. These structural data reinforce previous observations regarding the structural plasticity of helical protein assemblies and the need for high resolution structural analysis. Despite these observations, the native designability of tandem repeat proteins offers the opportunity to engineer novel helical nanotubes. Furthermore, the resultant nanotubes have independently addressable and chemically distinguishable interior and exterior surfaces that would facilitate applications in selective recognition, transport, and release.

59 BASIC BIOLOGICAL SCIENCES↗

Determination of β -decay feeding patterns of 88 Rb and 88 Kr using the Modular Total Absorption Spectrometer at ORNL HRIBF

We report precise determination of ground-state feeding in the β decay of fission products is an important but challenging component in modeling reactor antineutrino flux and reactor decay heat. The Modular Total Absorption Spectrometer (MTAS) is a versatile NaI(Tl) detector array that determines the true β-decay pattern free from the pandemonium effect, including precise ground-state feeding intensities. In this paper, we report MTAS results of the β feeding intensities of 88 Rb and 88 Kr, fission products with large cumulative yields in nuclear reactors. By comparing MTAS results with previous measurements, 88 Rb provides a validation of MTAS's ability to determine ground-state feedings in β decays, while the precision of 88 Kr ground-state feeding is improved when compared with the Evaluated Nuclear Structure Data File (ENSDF). The investigation of sources that contribute to β feeding branching uncertainties in MTAS experiments is discussed in detail. Lastly, the deconvolution of 88 Rb decay spectra suggests that MTAS can distinguish an allowed β spectral shape from a first forbidden unique β spectral shape.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Topic modeling to discern irregular order patterns in unlabeled electronic health records

This paper presents an application of topic modeling on event sequences of Electronic Health Record (EHR) orders. Metaphorically, we approach clinical order event sequences of unlabeled data as if they are documents where words are the events that occurred in the history of an order. We demonstrate the approach leveraging Consult orders data. The details of the data preprocessing and the data structures are described along with the data sources. Latent Dirichlet Allocation (LDA) is leveraged to fit against the limited datasets prepared. Another open source tool – LDAvis is used for exploratory analysis of the LDA results. The preliminary results revealed some order patterns that are qualitatively evaluated as potential irregular transitions. The goal of this analysis is to provide unsupervised learning application to domain experts in the absence of labeled data where they can investigate captured patterns and identify irregular transitions of orders. Ultimately, such efforts will guide formalization of hazard detection algorithms that monitor EHR data to identify health information technology related hazards.

Ozmen, Ozgur↗

Data-Efficient Dimensionality Reduction and Surrogate Modeling of High-Dimensional Stress Fields

Tensor datatypes representing field variables like stress, displacement, velocity, etc., have increasingly become a common occurrence in data-driven modeling and analysis of simulations. Numerous methods [such as convolutional neural networks (CNNs)] exist to address the meta-modeling of field data from simulations. As the complexity of the simulation increases, so does the cost of acquisition, leading to limited data scenarios. Modeling of tensor datatypes under limited data scenarios remains a hindrance for engineering applications. Here, in this article, we introduce a direct image-to-image modeling framework of convolutional autoencoders enhanced by information bottleneck loss function to tackle the tensor data types with limited data. The information bottleneck method penalizes the nuisance information in the latent space while maximizing relevant information making it robust for limited data scenarios. The entire neural network framework is further combined with robust hyperparameter optimization. We perform numerical studies to compare the predictive performance of the proposed method with a dimensionality reduction-based surrogate modeling framework on a representative linear elastic ellipsoidal void problem with uniaxial loading. The data structure focuses on the low-data regime (fewer than 100 data points) and includes the parameterized geometry of the ellipsoidal void as the input and the predicted stress field as the output. The results of the numerical studies show that the information bottleneck approach yields improved overall accuracy and more precise prediction of the extremes of the stress field. Additionally, an in-depth analysis is carried out to elucidate the information compression behavior of the proposed framework.

artificial intelligence↗

Axom

Axom is an open-source library of "building block" software components that provide core infrastructure capabilities for HPC applications. Such capabilities include: input file parsing and verification for various file formats, format specification for material shape input to multi-material simulations and tools for placing those shapes on meshes, parallel distributed coordination of diagnostic messages, geometric primitives, spatial queries and spatial search acceleration data structures, in memory key-value data store for managing simulation data and parallel file I/O. Axom components are used widely across LLNL Advanced Simulation and Computing program applications. It is also part of the LLNL institutionally-supported RADIUSS project, which promotes and funds its adoption by projects across LLNL.

Zagaris, George↗

Data Evaluation of Actinide Cross Sections: 240 Am, 241 Am, and 242 Am

Evaluations for neutron-induced reactions on the isotopes 240 Am, 241 Am, and 242 Am were per formed by optimizing reaction-model calculations based on existing experimental data from both direct measurements and surrogate reactions. The evaluated data were based on results obtained from the LLNL reaction codes YAHFC and FRESCO using up-to-date nuclear models; including an improvement upon some previous treatments for inelastic processes. Nuclear reaction codes generated data for all relevant reaction channels, which were then translated into Generalized Nu clear Data Structure and LLNL’s Evaluated Neutron Data Libraries (ENDL). These data libraries were tested for potential errors and applied to verification and validation (V&V) tests suites where applicable for comparisons.

42 ENGINEERING↗

Real-time Data Analytics for Condition Monitoring of Complex Industrial Systems

Modern industrial systems are now fitted with several sensors for condition monitoring. This is advantageous because these sensors can provide mass amounts of data that have the potential for aiding in tasks such as fault detection, diagnosis, and prognostics. However, the information valuable for performing these tasks is often clouded in noise and must be mined from high-dimensional data structures. Therefore, this dissertation presents a data analytics framework for performing these condition monitoring tasks using high-dimensional data. Demonstrations of this framework are detailed for challenges related to power generation systems in automobiles, power plants, and aircraft engines. These implementations leverage data collected from state-of-the-art, industry class test-rigs. Results indicate the ability of this framework to develop effective methodologies for condition monitoring of complex systems.

Peters, Benjamin↗

Activities of human RRP6 and structure of the human RRP6 catalytic domain

The eukaryotic RNA exosome is a highly conserved multi-subunit complex that catalyzes degradation and processing of coding and noncoding RNA. A noncatalytic nine-subunit exosome core interacts with Rrp44 and Rrp6, two subunits that possess processive and distributive 3'-to-5' exoribonuclease activity, respectively. While both Rrp6 and Rrp44 are responsible for RNA processing in budding yeast, Rrp6 may play a more prominent role in processing, as it has been demonstrated to be inhibited by stable RNA secondary structure in vitro and because the null allele in budding yeast leads to the buildup of specific structured RNA substrates. Human RRP6, otherwise known as PM/SCL-100 or EXOSC10, shares sequence similarity to budding yeast Rrp6 and is proposed to catalyze 3'-to-5' exoribonuclease activity on a variety of nuclear transcripts including ribosomal RNA subunits, RNA that has been poly-adenylated by TRAMP, as well as other nuclear RNA transcripts destined for processing and/or destruction. To characterize human RRP6, we expressed the full-length enzyme as well as truncation mutants that retain catalytic activity, compared their activities to analogous constructs for Saccharomyces cerevisiae Rrp6, and determined the X-ray structure of a human construct containing the exoribonuclease and HRDC domains that retains catalytic activity. Structural data show that the human active site is more exposed when compared to the yeast structure, and biochemical data suggest that this feature may play a role in the ability of human RRP6 to productively engage and degrade structured RNA substrates more effectively than the analogous budding yeast enzyme.

59 BASIC BIOLOGICAL SCIENCES↗

Composition and Structure of (Zr{sub 0.37}Ti{sub 0.63}){sub 3}AlC{sub 2} MAX Phase Crystals Prepared by Self-Propagating High-Temperature Synthesis

A (Zr{sub 0.37}Ti{sub 0.63}){sub 3}AlC{sub 2} MAX phase has been prepared by self-propagating high-temperature synthesis. The composition of its crystals has been determined by comparing X-ray structure analysis results with structural data for (Zr{sub x}Ti{sub 1–x}){sub 3}AlC{sub 2} (0 < x < 1) crystals prepared by other methods. Comparison of X-ray structure analysis data with density functional theory calculation results indicates that the arrangement of the Zr and Ti atoms in the metal–carbon layer is disordered.

36 MATERIALS SCIENCE↗

Manipulating Magnetism: Ru-2(5+) Paddlewheels Devoid of Axial Interactions

Variable-temperature magnetic and structural data of two pairs of diruthenium isomers, one pair having an axial ligand and the formula Ru-2(DArF)(4)Cl (where DArF is the anion of a diarylformamidine isomer and Ar = p-anisyl or m-anisyl) and the other one being essentially identical but devoid of axial ligands and having the formula [Ru-2(DArF)(4)]BF4, show that the axial ligand has a significant effect on the electronic structure of the diruthenium unit. Variable temperature crystallographic and magnetic data as well as density functional theory calculations unequivocally demonstrate the occurrence of pi interactions between the p orbitals of the chlorine ligand and the pi* orbitals in the Ru-2(5+) units. The magnetic and structural data are consistent with the existence of combined ligand sigma/metal sigma and ligand p pi/metal-d pi interactions. Electron paramagnetic resonance data show unambiguously that the unpaired electrons are in metal-based molecular orbitals.

DIRUTHENIUM↗

Nuclear Data Sheets A=32

Nuclear spectroscopic information for experimentally investigated nuclides of mass 32 (Ne, Na, Mg, Al, Si, P, S, Cl, Ar) has been evaluated. The principal sources of the Adopted Levels presented for nuclides close to the stability line are Endt's evaluations (1990En08, 1978En02). The data sets for reactions and decays, including all available gamma-ray data, are based mostly on the original literature. Except for the half-life of {sup 32}Ne decay, no other details about its decay characteristics are available. Structure data for {sup 32}Ne and {sup 32}Na are limited to only one excited state in each. The {sup 32}Mg nuclide is of central and prime relevance in the 'island of inversion' at or near N = 20 semi-closed shell. The lifetime of only one excited state in {sup 32}Mg is known. The spin-parity assignments of several levels in this nucleus are not quite firm. The structure of {sup 32}Ar is limited to only one known state at low energy and two resonances in the giant-dipole excitation region. The {sup 32}P, {sup 32}S and {sup 32}Cl remain the most extensively studied nuclei through various reaction channels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Unified architecture for data-driven metadata tagging of building automation systems

This article presents a Unified Architecture (UA) for automated point tagging of Building Automation System (BAS) data, based on a combination of data-driven approaches. Advanced energy analytics applications—including fault detection and diagnostics and supervisory control—have emerged as a significant opportunity for improving the performance of our built environment. Effective application of these analytics depends on harnessing structured data from the various building control and monitoring systems, but typical BAS implementations do not employ any standardized metadata schema. While standards such as Project Haystack and Brick Schema have been developed to address this issue, the process of structuring the data, i.e., tagging the points to apply a standard metadata schema, has, to date, been a manual process. This process is typically costly, labor-intensive, and error-prone. In this work we address this gap by proposing a UA that automates the process of point tagging by leveraging the data accessible through connection to the BAS, including time-series data and the raw point names. The UA intertwines supervised classification and unsupervised clustering techniques from machine learning and leverages both their deterministic and probabilistic outputs to inform the point tagging process. Furthermore, we extend the UA to embed additional input and output data-processing modules that are designed to address the challenges associated with the real-time deployment of this automation solution. We test the UA on two datasets for real-life buildings: (i) commercial retail buildings and (ii) office buildings from the National Renewable Energy Laboratory (NREL) campus. We report the proposed methodology correctly applied 85–90% and 70–75% of the tags in each of these test scenarios, respectively for two significantly different building types used for testing UA's fully-functional prototype. The proposed UA, therefore, offers promising approach for automatically tagging BAS data as it reaches close to 90% accuracy. Further building upon this framework to algorithmically identify the equipment type and their relationships is an apt future research direction to pursue.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Cascades/Aleutian Play Fairway Analysis: Data and Map Files

Contains Excel data files used to quantifiably rank the geothermal potential of each of the young volcanic centers of the Cascade and Aleutian Arcs using world power production volcanic centers as benchmarks. Also contains shapefiles used in play fairway analysis with power plant, volcano, geochemistry and structural data.

15 GEOTHERMAL ENERGY↗

Ligand Binding and Substrate Discrimination by UDP-Galactopyranose Mutase

Galactofuranose (Galf) residues are present in cell wall glycoconjugates of numerous pathogenic microbes. Uridine 5{prime}-diphosphate (UDP) Galf, the biosynthetic precursor of Galf-containing glycoconjugates, is produced from UDP-galactopyranose (UDP-Galp) by the flavoenzyme UDP-galactopyranose mutase (UGM). The gene encoding UGM (glf) is essential for the viability of pathogens, including Mycobacterium tuberculosis, and this finding underscores the need to understand how UGM functions. Considerable effort has been devoted to elucidating the catalytic mechanism of UGM, but progress has been hindered by a lack of structural data for an enzyme-substrate complex. Such data could reveal not only substrate binding interactions but how UGM can act preferentially on two very different substrates, UDP-Galp and UDP-Galf, yet avoid other structurally related UDP sugars present in the cell. Herein, we describe the first structure of a UGM-ligand complex, which provides insight into the catalytic mechanism and molecular basis for substrate selectivity. The structure of UGM from Klebsiella pneumoniae bound to the substrate analog UDP-glucose (UDP-Glc) was solved by X-ray crystallographic methods and refined to 2.5 {angstrom} resolution. The ligand is proximal to the cofactor, a finding that is consistent with a proposed mechanism in which the reduced flavin engages in covalent catalysis. Despite this proximity, the glucose ring of the substrate analog is positioned such that it disfavors covalent catalysis. This orientation is consistent with data indicating that UDP-Glc is not a substrate for UGM. The relative binding orientations of UDP-Galp and UDP-Glc were compared using saturation transfer difference NMR. The results indicate that the uridine moiety occupies a similar location in both ligand complexes, and this relevant binding mode is defined by our structural data. In contrast, the orientations of the glucose and galactose sugar moieties differ. To understand the consequences of these differences, we derived a model for the productive UGM-substrate complex that highlights interactions that can contribute to catalysis and substrate discrimination.

59 BASIC BIOLOGICAL SCIENCES↗