Search NASA⌕ Search

SEARCH · Search NASA

Results for “study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

An experimental study on round-trip efficiency of a preheating control with a medium office building

The interactions between building energy efficiency and demand response (DR) with buildings may complicate their impacts on the electricity grid and buildings, yet those interactions are not well understood. This work fills this gap by presenting an experimental study that quantifies the effects of DR on building energy efficiency. Unlike existing studies, this work 1) investigates the uncertainty levels when assessing the effects of DR; 2) studies the impact of rooftop heat pumps with direct expansion refrigerant-to-air coils on the round-trip efficiency. Specifically, we considered a medium office building (~1860 m 2 ), which is served by rooftop units, located in eastern Washington State. We performed preheating control tests during typical heating days in the year 2022 and compared the building’s energy consumption during the testing days to that during normal operation days under similar weather conditions. To understand how well those normal operation days represent the baseline for the assessment, the relationship between the energy performance of this building and weather conditions was also studied. Experimental results reveal that the round-trip efficiency (i.e., the ratio of discharging energy output from the building to charging energy input into the building) was between 0.16 and 0.92. The results show that significant energy loss may occur during the preheating process. Finally, it also suggests a significant correlation between the energy efficiency of the studied building under the preheating control and the outdoor temperature; and a highly nonlinear relationship between the zone temperature changing rate and the weather condition.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Solar cities: A case study analysis of city-level enablers of expanded solar energy access

Rooftop solar photovoltaic (PV) adoption can benefit households by reducing electricity bills and enhancing energy resiliency. Low and moderate-income (LMI) households have been less likely to adopt PV and experience these benefits in the United States than higher-income households. Adopter income trends are often explored through quantitative analysis with limited explanatory power. Our quantitative analysis only explains around one-third of city-level variation in LMI adoption trends through socioeconomic factors such as median home values and income inequality and PV market factors such as cumulative adoption and incentives. We implement semi-structured interviews in three case studies of cities with relatively high rates of LMI PV adoption to better understand the factors that explain PV adopter income trends. The case studies partly reiterate findings from quantitative analysis, such as the role of PV incentives. The case studies reveal a broader set of LMI adoption drivers that are missed in quantitative analyses. The case studies show how city contexts can affect LMI adoption, such as the role of supportive city governments. The case studies also reveal the importance of partnerships, such as partnerships between city governments and state LMI PV program implementers. Finally, interviewees emphasized the importance of building trust among prospective LMI PV adopters. Interviewees suggested that partnerships, outreach, and consumer protection measures were crucial to building trust in PV installers among LMI households.

Adoption↗
DOE OSTI2023

Stability study of aqueous foams under high-temperature and high-pressure conditions relevant to Enhanced Geothermal Systems (EGS)

In Enhanced Geothermal System (EGS) hydraulic fracturing is carried out by injecting cold water into deep Hot Dry Rocks (HDR) under carefully controlled conditions to create new or reopen existing fractures. Water-based fracturing fluids demonstrate some challenges including immense quantity of water usage, water sensitivity of the formations, water blocking, and lack of proppant carrying capacity and transportation. Thus, an alternative is to use foam-based fracturing fluid which offers potential advantage over conventional water-based fracturing fluid such as minimum water usage, reduced wellbore damage, high proppant carrying capacity, and less environmental damage. However, foams are complex mixture of gaseous phase and liquid phase which are thermodynamically unstable at downhole conditions, and their stability can decrease over time due to liquid drainage, bubble coarsening, and coalescence. This paper shows laboratory experiments executed to study foam stability at high temperature (200°C) and high pressure (6.9MPa) conditions which simulates the geothermal environment. Foam stability was characterized by half-life of foam, which is defined as the time taken by the foam to decreases by 50% of its original height due to drainage. In this paper, two types of gaseous phases, nitrogen (N 2 ) and carbon dioxide (CO 2 ) were investigated. Also, based on successful practice of foam-based fracturing fluid in oil and gas industries, four surfactants, including Alpha olefin sulfonate (AOS), Sodium dodecyl sulfonate (SDS), Tergitol™ (NP – 40), and Cetyltrimethylammonium chloride (CTAC) at optimum concentration of 1wt.% were tested for best stability performance. In addition, different stabilizing agents including guar gum, bentonite clay, crosslinker, silicon dioxide nanoparticles (SiO 2 ), graphene oxide (GO) were also studied. Experimental results showed that N 2 foams were more stable than CO 2 foams. It was observed that foam half-life decreased with the increase in temperature. Among all the surfactants, AOS foams showed the most promising thermal stability at high temperatures. Moreover, with the addition of stabilizing agents, foam's half-life was enhanced. Stabilizing agents such as crosslinker and GO dispersion showed the most stable foams with half-life recorded at 20min and 17min, respectively, at 200°C and 6.9MPa. Finally, pressure also showed a positive effect on foam stability; with increased pressure, foam half-life was increased. Based on the experimental data, analytical models for the effect of temperature and pressure were developed, considering foam degradation is a first-order kinetic reaction that linearly depends on the foam drainage mechanism. The effect of temperature on foam half-life was studied as an exponential decay model. In this model, foam half-life is a function of drainage rate constant (D A ) and activation energy (E a ) of the foam system. The effect of pressure on foam half-life was found to obey a power-law model where an increase in pressure showed an increase in foam half-life. Furthermore, a linear relation was studied for the effect of pressure on foam activation energy and drainage rate. Then the combined effects of temperature and pressure were studied, which yielded an analytical model to predict the foam stabilities in terms of half-life for different foam compositions. In conclusion, this research indicates that with an appropriate selection of surfactants and stabilizing agents, it is possible to obtain stable foams, which could replace conventional water fracturing fluid under EGS conditions.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Geological study of an outburst flood event in the upper Yangtze River and risk of similar extreme events

Here, outburst flood sediments are studied on the upper course of the Yangtze River (known as the Jinsha River) where is a key region for the development of hydroelectric power. As the history and magnitude of outburst flooding in this stretch of the Jinsha River during historic times has remained largely undocumented, we have endeavored as part of this study to conduct field investigations into, and provide numerical dating (using OSL and 14 C dating techniques) of outburst flood evidence found in the First Bend area of the Yangtze River. Carbonized nutshells and charcoal from the ancient settlement yielded 14 C ages that precisely pinpointed an outburst flood event ~1200–1300 cal yr BP, during China's Tang Dynasty (618–907 CE). However, OSL ages using the minimum age model for all outburst flood samples ranged from 9.1 to 1.8 ka, which was ~0.5–7.8 ka older than the 14 C-dated outburst flood. This discrepancy suggests a potential overestimation of quartz age when dating outburst flood sediments from the Holocene period. Furthermore, using 2D hydraulic modeling, we estimated the magnitude of the aforementioned outburst flood, revealing a reconstructed peak flow discharge of 51,000–55,300 m 3 /s. This discharge was three times greater than the 10,000-year flood for the hydroelectric power station nearest to the study area. Our study underscores the significant role of combining archaeological and geological evidence in enhancing paleoflood hydrology research. Through a multidisciplinary approach, our findings emphasize the importance of paleoflood hydrology studies in comprehending both the latent and catastrophic flood risks in alpine mountain areas amid the context of global warming.

14C dating↗
DOE OSTI2023

State-of-the-art and review of condensation heat transfer for small modular reactor passive safety: Computational studies

The small modular reactor (SMR) is a promising option with added safety features, economical manufacturing, reliable parts, portability, and scalable energy capacity that emits no greenhouse gas during its operating lifespan. The SMR safety systems, however, need to be evaluated for design and licensing. Thus, they require the verification and validation of the physics models and correlations. This study focuses on state-of-the-art condensation heat transfer analysis and a review of previous studies related to the passive containment cooling system (PCCS) of a SMR. In the PCCS of a SMR, due to its smaller size containment, filmwise condensation is dominant and therefore emphasized in this study. Furthermore, previous condensation heat transfer studies for PCCSs did not make the SMR the primary focus, so a critical review for formulating the state-of-the-art is necessary. A previous review covered experimental condensation heat transfer studies with a brief overview of associated test facilities and empirical correlations. This review covers the empirical, resistance-layer and theoretical (numerical and commercial CFD) approaches.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Effects of grain size and porosity on cladding failure in high-burnup UO 2 : A sensitivity and uncertainty study

Isotopic taggants are being studied to aid in the provenance assessment of nuclear materials. However, these taggants must be selected such that they do not adversely affect fuel performance during normal operation or accident scenarios. Taggants are known to affect the fuel’s grain size and porosity. In the work described in this paper, the BISON fuel performance code was used to assess the potential effects of taggants (i.e., grain size and porosity) on fuel rod behavior and cladding failure during a high-burnup, large-break loss-of-coolant accident. Here, 281 individual fuel rods from the same reactor core were modeled for a sensitivity study, a parametric study, and uncertainty quantification. The cladding failure predictions often exhibited stochastic behavior. After additional study, it was found that the cladding failure model is highly sensitive to residual error inherent to numerical approximation solvers. Some strategies to mitigate this sensitivity are discussed. The study found no relationship between known taggant effects and cladding failure status. However, taggants were found to affect the time and location of failure in certain rods. In conclusion, future work to continue investigating and validating these findings is briefly discussed.

Doped UO 2↗
DOE OSTI2026

Margin to onset of nucleate boiling and flow instability studies for preliminary MITR design-demonstration element thermal-hydraulics

This study covers the onset of flow instability (OFI) preliminary results obtained from leveraging correlations, in addition to the preliminary thermal hydraulics results such as pressure, flow velocity, temperature, and oxide layer over the design demonstration experiment (DDE) for the Massachusetts Institute of Technology Reactor (MITR). Current computational fluid dynamics (CFD) models in fluid structure interaction (FSI) have added the capability of assessing margins to onset of nucleate boiling (ONB). This study initiates the capability to model the margin to OFI and ONB presented for the MITR. Such study is supportive of the United States High Performance Research Reactor (USHPRR) program. Previous studies provided preliminary thermal-hydraulic and mechanical analyses of the hydrodynamic effects in the MITR DDE under conservative approximations for plate power distribution. In conclusion, this study focuses on providing insights into the OFI future research direction optimizing the transport of thermal energy, mass-flow rates, flow-channel geometries, and boundary conditions.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Cationic Cobalt(II) Bisphosphine Hydroformylation Catalysis: In Situ Spectroscopic and Reaction Studies

[HCo(CO) x (bisphosphine)](BF 4 ), x = 1–3, is a highly active hydroformylation catalyst system, especially for internal branched alkenes. In situ infrared spectroscopy (IR), electron paramagnetic resonance (EPR), and nuclear magnetic resonance studies support the proposed catalyst formulation. IR studies reveal the formation of a dicationic Co(I) paramagnetic CO-bridged dimer, [Co 2 (μ-CO) 2 (CO)(bisphosphine) 2 ] 2+ , at lower temperatures formed from the reaction of two catalyst complexes via the elimination of H 2 . Here, DFT studies indicate a dimer structure with square-pyramidal and tetrahedral cobalt centers. This monomer–dimer equilibrium is analogous to that seen for HCo(CO) 4 , reacting to eliminate H 2 and form Co 2 (CO) 8 . EPR studies on the catalyst show a high-spin (S = 3/2) Co(II) complex. Reaction studies are presented that support the cationic Co(II) bisphosphine catalyst as the catalyst species present in this system and minimize the possible role of neutral Co(I) species, HCo(CO) 4 or HCo(CO) 3 (phosphine), as catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

STREAMS guidelines: standards for technical reporting in environmental and host-associated microbiome studies

The interdisciplinary nature of microbiome research, coupled with the generation of complex multi-omics data, makes knowledge sharing challenging. The Strengthening the Organization and Reporting of Microbiome Studies (STORMS) guidelines provide a checklist for the reporting of study information, experimental design and analytical methods within a scientific manuscript on human microbiome research. Here, in this Consensus Statement, we present the standards for technical reporting in environmental and host-associated microbiome studies (STREAMS) guidelines. The guidelines expand on STORMS and include 67 items to support the reporting and review of environmental (for example, terrestrial, aquatic, atmospheric and engineered), synthetic and non-human host-associated microbiome studies in a standardized and machine-actionable manner. Based on input from 248 researchers spanning 28 countries, we provide detailed guidance, including comparisons with STORMS, and case studies that demonstrate the usage of the STREAMS guidelines. In conclusion, STREAMS, like STORMS, will be a living community resource updated by the Consortium with consensus-building input of the broader community.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

High pressure structural and lattice dynamics study of α-In2Se3

Layered α-In2Se3 has been studied using a combined in situ synchrotron angle-dispersive powder x-ray diffraction and Raman spectroscopy study in a diamond anvil cell up to 60+ GPa, at room temperature. Helium, which remains fairly hydrostatic up to the highest pressure in this study, was used as the pressure-transmitting medium. The results from both experimental methods reveal a pressure-induced structural phase transition from α-In2Se3 to a monoclinic β'-In2Se3 structure at ≈1 GPa, in agreement with previous studies. Based on our detailed measurements using both experimental techniques and the F-f formalism, the β'-In2Se3 structure remains stable up to 45 GPa, without a clear indication of a phase transition toward the previously reported β-In2Se3 phase. Above this pressure, In2Se3 adopts a disordered solid-solution-like orthorhombic structure, phase IV. The results are discussed in comparison with the relevant previous studies of α-In2Se3 under pressure.

Feng, Shiyu↗
DOE OSTI2020

Controlled plasma–droplet interactions: a quantitative study of OH transfer in plasma–liquid interaction

Plasmas in contact with liquids are a rich source of OH radicals and have been extensively studied in the last decade to leverage the ability to generate chemically reactive species in gas phase plasmas to decompose organics. Multiphase transfer of OH radicals is highly transport limited and to overcome transport limits, the plasma activation of aerosols, small liquid droplets, interspersed in the plasma has been proposed. In this work, we report a combined experimental and modeling study of a controlled plasma–droplet interaction experiment using a diffuse RF glow discharge in He + 0.2% H 2 O with detailed plasma diagnostics, ex situ analysis of the plasma-induced chemistry in the droplet containing formate, droplet trajectory and size measurements. This enables a quantitative study of the reactivity transfer of OH from the gas phase plasma to the liquid phase and how its diffusion limitations impact formate decomposition in the water droplet. For a droplet with a diameter of 36 μm, we observed 50% reduction in formate concentration in the droplets after plasma treatment for droplet residence times in the plasma of ~10 ms. These short droplet residence times in the plasma allow in some cases for droplet size reductions of ~5% in spite gas temperatures of 360 K. A one-dimensional reaction–diffusion model was used to calculate the OH transport and formate oxidation inside the droplet and was able to predict the conversion of formate by plasma in a droplet without any fitting parameters. The model further shows that formate conversion is dominated by near-interfacial reactions with OH radicals and is limited by diffusion of formate in the droplet. Here, the results show that a controlled plasma–micro-droplet reactor as reported in this study might be an excellent tool for detailed quantitative plasma–liquid interaction studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

An Unsteady Actuator Line Solver to Enable Adjoint Sensitivity Studies for Wake Steering

This study demonstrates the sensitivity of wind turbine wake steering performance to blade design. An actuator line model was implemented within an unsteady adjoint solver that enables efficient execution of gradient-based optimization and sensitivity studies. After first confirming the feasibility of wake steering by controlling actuator line chord profiles and formulating a suitable objective function for wake position, a sensitivity study was conducted to determine the relative importance of chord length as a function of spanwise position on the resulting turbine wake deflection. The results presented here support the idea that blade design choices play a role in wake control. In a larger context, this study demonstrates a computational framework in which turbine and blade designs can be studied at the individual and farm-wide level to enhance wind plant controllability and manage power output.

17 WIND ENERGY↗
DOE OSTI2025

Computational Study of a Cryopump Design for Fusion Exhaust Gas Purification Using Direct Simulation Monte Carlo

Cryopump-based direct internal recycling (DIR) of fusion fuel is an attractive prospect because it provides pumping of helium ash from a reactor along with separation of helium and other impurities from the fuel. Previous studies have demonstrated a continuously regenerating cryopump, referred to as the Snail pump, that separates helium ash from fusion fuel for reactor-relevant flow rates. Here, in this study, a conceptual cryopump was designed as a proof-of-principle study to target other impurities, besides helium ash, from the fusion exhaust that would complement the Snail pump. The impurity-removal cryopump consists of four sets of chevron fins, two sets operating at 80 K and the other two at 30 K. A computational study using direct simulation Monte Carlo (DSMC) was performed with a gas mixture of 96.5% D2, 2.0% He, and 0.5% each of CO2, N2, and CH4. In this configuration, 80 K chevron fin sets are capable of capturing CO2 and 30 K sets capable of capturing CO2, N2, and CH4. The computational study showed that the cryopump is capable of reducing the impurity content by more than two orders of magnitude from the flow.

Adhikari, Nirajan [Oak Ridge National Laboratory (↗
DOE OSTI2022

Multivariate analysis: An essential for studying complex glasses

Understanding the impact of individual compositional components on the devitrification of complex multicomponent glasses, for example, 10–50+ oxides, typically requires numerous studies to examine each component's impact. Here we apply exploratory data analysis (EDA) to a heterogeneous data set of silicate glasses to determine the cations’ individual and interacting effects on the crystallization of nepheline (nominally NaAlSiO 4 ). Our data consisted of 795 simulated high-level nuclear waste glasses composed of, on average, 50 oxide components. We determine the interactions in the heterogeneous data that cause deviations from the behavior found in simplified composition studies. Using both univariate and bivariate EDA techniques, we demonstrate the importance of including calculated structural glass parameters on nepheline's devitrification, including field strength, cation-to-anion radius ratio, and single-bond strength. Here, we also show that studies with simplified glass compositions may fall short in generating knowledge directly transferrable to complex glass compositions. The method used in this study has the potential to inform experimental design for simplified compositions (~6+ oxides) that can generate knowledge directly transferrable to complex, multivariable compositions. The observations reported here have broad implications for any study attempting to map the physical properties of a complex glass containing numerous cations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Computational and Experimental Study of Film-Cooling Effectiveness With and Without Downstream Vortex Generators

Downstream vortex generators that involve a pair of rectangular plates arranged in an open V-shape placed just downstream of each film-cooling hole were shown to create flow and vortical structures that entrain lifted film-cooling flow back to the surface and increase its lateral spreading on the surface (GT2020–14317). In this study, computations and measurements were performed to examine the flow mechanisms this vortex generator induces to improve film-cooling effectiveness of a flat plate with the cooling flow emanating from one row of inclined holes. Parameters studied include blowing ratio (BR = 0.75 and 1.0) and temperature ratio (TR = 1.07 and 1.9). Here, the computational study is based on steady Reynolds-averaged Navier–Stokes (RANS) closed by the shear-stress transport (SST) turbulence model with and without conjugate analysis. The experimental study was conducted by using a conjugate heat transfer test rig with a plenum, where cooling flow is introduced. Measurements made include velocity and temperature profiles upstream and downstream of the film-cooling holes as well as the temperature at several locations on the hot and cold sides of the film-cooled flat plate. The computational study was validated by comparing computed results with those from measurements at BR = 0.75 and 1.0 and TR = 1.9. Computational and experimental results are presented to show the effects of BR and TR on the flow structures and how those structures improve the effectiveness of film cooling with and without the downstream vortex generators and with and without conjugate heat transfer.

42 ENGINEERING↗
DOE OSTI2024

Drug providers’ perspectives on antibiotic misuse practices in eastern Ethiopia: a qualitative study

Objective Antibiotic misuse includes using them to treat colds and influenza, obtaining them without a prescription, not finishing the prescribed course and sharing them with others. Although drug providers are well positioned to advise clients on proper stewardship practices, antibiotic misuse continues to rise in Ethiopia. It necessitates an understanding of why drug providers failed to limit such risky behaviours. This study aimed to explore drug providers’ perspectives on antibiotic misuse practices in eastern Ethiopia. Setting The study was conducted in rural Haramaya district and Harar town, eastern Ethiopia. Design and participants An exploratory qualitative study was undertaken between March and June 2023, among the 15 drug providers. In-depth interviews were conducted using pilot-tested, semistructured questions. The interviews were transcribed verbatim, translated into English and analysed thematically. The analyses considered the entire dataset and field notes. Results The study identified self-medication pressures, non-prescribed dispensing motives, insufficient regulatory functions and a lack of specific antibiotic use policy as the key contributors to antibiotic misuse. We found previous usage experience, a desire to avoid extra costs and a lack of essential diagnostics and antibiotics in public institutions as the key drivers of non-prescribed antibiotic access from private drug suppliers. Non-prescribed antibiotic dispensing in pharmacies was driven by client satisfaction, financial gain, business survival and market competition from informal sellers. Antibiotic misuse in the setting has also been linked to traditional and ineffective dispensing audits, inadequate regulatory oversights and policy gaps. Conclusion This study highlights profits and oversimplified access to antibiotics as the main motivations for their misuse. It also identifies the traditional antibiotic dispensing audit as an inefficient regulatory operation. Hence, enforcing specific antibiotic usage policy guidance that entails an automated practice audit, a responsible office and insurance coverage for persons with financial limitations can help optimise antibiotic use while reducing resistance consequences.

General & Internal Medicine↗
DOE OSTI2023

Vertical Structure and Ice Production Processes of Shallow Convective Postfrontal Clouds over the Southern Ocean in MARCUS. Part I: Observational Study

A study of the vertical structure of postfrontal shallow clouds in the marine boundary layer over the Southern Ocean is presented here. The central question of this two-part study regards cloud phase (liquid/ice) of precipitation, and the associated growth mechanisms. In this first part, data from the Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) field campaign are analyzed, starting with a 75-h case with continuous sea surface-based thermal instability, modest surface heat fluxes, an open-cellular mesoscale organization, and very few ice nucleating particles (INPs). The clouds are mostly precipitating and shallow (tops mostly around 2 km above sea level), with weak up- and downdrafts, and with cloud-top temperatures generally around –18° to –10°C. Further, the case study is extended to three other periods of postfrontal shallow clouds in MARCUS. While abundant supercooled liquid water is commonly present, an experimental cloud-phase algorithm classifies nearly two-thirds of clouds in the 0° to –5°C layer as containing ice (cloud ice, snow, or mixed phase), implying that much of the precipitation grows through cold-cloud processes. The best predictors of ice presence are cloud-top temperature, cloud depth, and INP concentration. Measures of convective activity and turbulence are found to be poor indicators of ice presence in the studied environment. The water-phase distribution in this cloud regime is explored through numerical simulations in Part II. Significance Statement: Climate models generally predict a lower albedo than observed over the Southern Ocean, and this is largely attributed to a lack of cloudiness, especially in the postfrontal cold sector of midlatitude cyclones. This in turn may be due to an excess of ice in these simulated clouds, resulting in rapid precipitation fallout and an overly brief cloud lifespan. The objective of this study is to examine whether shallow postfrontal clouds over the Southern Ocean are dominated by supercooled drops, or by snow and ice, using data collected by a U.S. Department of Energy Atmospheric Radiation Measurement Mobile Facility deployed aboard an Australian Antarctic supply vessel. We find that these clouds contain much supercooled liquid, even though cloud-top temperatures generally are around –18° to –8°C, and that about two-thirds of the clouds just above the freezing level contain ice. Much of the precipitation appears to grow through cold-cloud processes above the freezing level, rather than drizzle/rain. Updrafts and/or turbulence in convection or in cloud-top generating cells do not initiate much ice, compared to observations elsewhere in a similar temperature range. This may be attributable to the extremely low concentration of ice nucleating particles in this environment. Ultimately, the deepest clouds with the coldest cloud tops are most likely to be ice dominated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

What to measure and report in studies of discomfort from glare for pedestrian applications

We report in outdoor environments after dark, pedestrians may experience discomfort from glare caused by lighting. Several models to predict discomfort from glare have been proposed or extended for pedestrian applications; these models use different luminous and geometrical quantities to predict discomfort. Consistent measurements and reporting in studies of discomfort from glare are important for identifying best performing models; however, previous studies proposing a new model tended to only report the performance of the new model and its quantities. This practice makes it difficult to evaluate how a new model performs compared to other existing models. To promote more consistent and complete reporting, this research note proposes measuring and reporting all relevant quantities that are used in existing models. This can make it easier for researchers to use a study dataset to compare the performance of several models or to combine datasets from several studies to address between-study variance.

42 ENGINEERING↗