Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Characterization and dispersibility of improved thermally stable amide functionalized graphene oxide

Graphical abstract: Improved thermal stability and surface study of amide functionalized graphene oxide. - Highlights: • Amide functionalized graphene oxides (AGOs) were synthesized from aniline, 2-aminothiazole and 2-aminopyrimidine. • Achieved enhancement in thermal stability of AGOs as compare to GO. • AGOs are found to be highly dispersible in water, DMSO and DMF. • Dispersibility is stable for more than two and half months. - Abstract: Amidation of graphene oxide (GO) with aniline, 2-aminothiazole and 2-aminopyrimidine results in the synthesis of amide functionalized graphene oxides (AGOs). Scanning electron microscopy, X-ray diffraction, thermogravimetric analysis (TGA), UV–vis and Raman spectroscopy were used to investigate the properties of AGOs. It was found that, contrary to GO, AGOs are soluble in water, dimethyl sulfoxide, dimethylformamide and can be stabilized for months. TGA of AGOs shows the major weight loss above 670 °C as compared to GO in which significant weight loss occurs near 200 °C. Thus AGOs show strong improvement in thermal properties.

36 MATERIALS SCIENCE↗

Facet-Dependent Ni Segregation in a Micron-Sized Single-Crystal Li 1.2 Ni 0.2 Mn 0.6 O 2 Cathode

Elemental surface segregation in cathode materials is critical for determining the phase and interfacial reaction between electrode and electrolyte, which consequently affects the electrochemical properties. Single-crystal cathode of Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 with an octahedral morphology of (102) and (003) dominated facets have been manifested to show enhanced electrochemical properties. However, the surface structural features of such single crystals have not been investigated. Herein, using scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, and electron energy loss spectroscopy, we probe the elemental surface segregation characteristics in these single-crystal cathode. We reveal that Ni surface segregation shows dependence on the crystal facet such that it occurs on crystal facets with a mix of cations and anions, but not on the facets with only cations or anions. Furthermore, facet-dependent surface reconstructions are observed, featuring a spinel-like structure at the Ni-rich facet but rock-salt structure at the facet without Ni segregation. The commonly known Mn reduction appears at the single crystal surfaces, more pronounced at the facet without Ni segregation. We further reveal that fluorination leads to the stabilization of surface oxygens. In conclusion, this study provides detailed structural and chemical information about the facet-dependent Ni surface segregation and the resulted phase formation in the rather less explored micron-sized octahedral Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 single crystals, which is key to further exploration of electrochemical properties of cathode in the form of micro-sized single crystal.

25 ENERGY STORAGE↗

X-ray photoelectron spectroscopy study of the chemical interaction at the Pd/SiC interface

In order to study the chemical interaction during interface formation between Pd and SiC, Pd layers of various thicknesses were deposited on structurally disordered SiC surfaces at 800 deg. C. The Pd/SiC interface, which plays a crucial role for many applications such as high power electronic devices and tristructural-isotropic (TRISO) nuclear fuels, was studied in situ by x-ray photoelectron spectroscopy. We find that after Pd deposition, Si-C and Si-Si bonds are broken in favor of the formation of not only Pd-Si but also Pd-C bonds. In addition, various silicon oxycarbide bonds are observed at the SiC surface and the Pd/SiC interface. These results are not only of relevance for the long-term stability of TRISO fuels but also for a variety of other applications, including Schottky-barrier-type contacts in electronic devices.

36 MATERIALS SCIENCE↗

Anatase TiO 2 Surface Hydration: Infrared Vibrational Assignment and Facet-Specific Stability

Anatase TiO 2 nanoparticles support a subtle diversity of surface aqua and hydroxy coordination environments that are characteristic of distinct facets and defect sites. The disparate properties and stability of each molecularly or dissociatively absorbed water environment may provide unique reactivity for facet- and site-selective atomic layer deposition (ALD). Here we probe the temperature-dependent and facet-specific stretching frequency and stability of surface hydroxyls on faceted anatase TiO 2 nanoparticles via in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Well-defined truncated octahedra, disks, and rods fabricated through hydrothermal synthesis present dominant (101), (001), and (010) facets, respectively. The selective dehydration of discrete local coordination environments as a function of temperature provides a potential pathway to site-selective and facet-selective ALD on metal oxide nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Closing the Nanographene Gap: Surface-Assisted Synthesis of Peripentacene from 6,6'-Bipentacene Precursors

The thermally induced cyclodehydrogenation reaction of 6,6'-bipentacene precursors on Au(111) yields peripentacene stabilized by surface interactions with the underlying metallic substrate. STM and atomic-resolution non-contact AFM imaging reveal rectangular flakes of nanographene featuring parallel pairs of zig-zag and armchair edges resulting from the lateral fusion of two pentacene subunits. The synthesis of a novel molecular precursor 6,6'-bipentacene, itself a synthetic target of interest for optical and electronic applications, is also reported here. The scalable synthetic strategy promises to afford access to a structurally diverse class of extended periacenes and related polycyclic aromatic hydrocarbons as advanced materials for electronic, spintronic, optical, and magnetic devices.

36 MATERIALS SCIENCE↗

Evaluation of the Impact of Surface Recombination in Microdisk Lasers by Means of High-Frequency Modulation

Microdisk lasers 10–30 μm in diameter operating at room temperature without thermal stabilization and with an active region based on nanostructures of hybrid dimensionality—quantum wells–dots—are investigated. High-frequency measurements of the microlaser response are performed in the direct small-signal modulation mode, which makes it possible to establish the parameters of the operating speed and analyze their dependence on the microlaser diameter. It is found that the K factor is (0.8 ± 0.2) ns, which corresponds to optical losses of ~6 cm{sup –1}, and no regular dependence on the diameter is observed. It is found that the low-frequency component of the damping coefficient of relaxation oscillations is inversely proportional to the diameter. This character of the dependence evidences a decrease in the carrier lifetime in small-diameter microcavities, which can be associated with the prevalence of nonradiative recombination on their side walls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Self-organizing layers from complex molecular anions

Ions are promising building blocks for tunable self-organizing materials with advanced technological applications. However, because of strong Coulomb attraction with counterions, the intrinsic properties of ions are difficult to exploit for preparation of bulk materials. Here, we report the precisely-controlled preparation of macroscopic surface layers by soft landing of mass selected complex anions which determine the self organization of the layers with their molecular properties. The family of halogenated dodecaborates [B12X12]2- (X = F, Cl, Br, I), in which the internal charge distribution between core and shell regions of the molecular ions systematically vary, was deposited on different self assembled monolayer surfaces (SAMs) on gold at high coverage. Layers of anions were found to be stabilized by accumulation of neutral molecules. Different phases, self-organization mechanisms and optical properties were observed to depend upon the internal charge distribution of the deposited anions, the underlying surface and the coadsorbed molecules. This demonstrates rational control of the properties of anion based layers.

Warneke, Jonas (ORCID:0000000232337412)↗

Density Functional Calculations of the Structure of Near-Surface Oxygen Vacancies and Electron Localization on CeO2(111)

One of the most topical issues surrounding oxygen vacancies on CeO{sub 2}(111) is the relative stability of surface and subsurface defects. Using density-functional theory (DFT) with the HSE06 (Heyd-Scuseria-Ernzerhof) hybrid functional as well as the DFT+U approach (where U is a Hubbard-like term describing the on-site Coulomb interactions), we find subsurface vacancies with (2 x 2) periodicity to be energetically more favorable by 0.45 (HSE06), 0.47 [PBE+U (Perdew-Burke-Ernzerhof functional)], and 0.22 eV [LDA+U (local density approximation)]. The excess electrons localize not on Ce ions which are the nearest neighbor to the defect as priorly suggested, but instead on those that are next-nearest neighbors. The excess-electron distribution and the preference for subsurface vacancies are explained in terms of defect-induced lattice relaxation effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Pd surface structure on the activation of methyl acetate

The activation of methyl acetate (CH3COOCH3; MA) has been studied using periodic density functional theory calculations to probe the effect of Pd surface structure on the selectivity in MA activation. The adsorption of MA, dehydrogenated derivatives, enolate (CH2COOCH3; ENL) and methylene acetate (CH3COOCH2; MeA), and several dissociation products (including acetate, acetyl, ketene, methoxy, formaldehyde, CO, C, O, and H); and C-H and C-O (mainly in the RCO-OR position) bond dissociation in MA, ENL, and MeA, are calculated on Pd(111) terrace, step, and kink; and on Pd(100) terrace and step. The adsorption of most species is not strongly affected between (111)- to (100)-type surfaces, but is clearly enhanced by step/kink compared to the corresponding terrace. Going from terrace to step edge and from (111)- to (100)-type surfaces both stabilize the transition states of C-O bond dissociation steps. Going from terrace to step edge also stabilizes the transition states of C-H bond dissociation steps, but going from (111)- to (100)-type surfaces does not clearly do so. We propose that compared to the Pd(111) terrace, the Pd(100) terrace is more selective for C-O bond dissociation that is desirable for alcohol formation, whereas the Pd step edges are more selective for C-H bond dissociation.

Xu, Lijun↗

Evolution of steady-state material properties during catalysis: Oxidative coupling of methanol over nanoporous Ag 0.03 Au 0.97

Activating pretreatments are used to tune surface composition and structure of bimetallic-alloy catalysts. Herein, the activation-induced changes in material properties of a nanoporous Ag 0.03 Au 0.97 alloy and their subsequent evolution under steady-state CH 3 OH oxidation conditions are investigated. Activation using O 3 results in AgO and Au 2 O 3 , strongly enriching the near-surface region in Ag. These oxides reduce in the O 2 /CH 3 OH mixture, yielding CO 2 and producing a highly Ag-enriched surface alloy. At the reaction tem-perature (423 K), Ag realloys gradually with Au but remains enriched (stabilized by surface O) in the top few nanometers, producing methyl formate selectively without significant deactivation. At higher tem-peratures, bulk diffusion induces sintering and Ag redistribution, leading to a loss of activity. These find-ings demonstrate that material properties determining catalytic activity are dynamic and that metastable (kinetically trapped) forms of the material may be responsible for catalysis, providing guiding principles concerning the activation of heterogeneous catalysts for selective oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing Local and Directional Aspects of Catalytic Active Sites by the Nuclear and Surface Electrostatic Potential

This work examines the prospects of using the electrostatic potential, V(r), as a descriptor in heterogeneous catalysis. In particular, the subatomic spatial resolution of the property allows for analysis of both directionality and confinement effects in surface adsorption. This feature of V(r) is used to identify adsorption sites, orientations, and energetics for metal surfaces, particles, and nanoclusters upon interactions with catalytically relevant intermediates. The use of V(r) in assessing the 3D nature of catalytic sites in low-temperature and electrocatalysis is highlighted, and future directions in catalysis design are discussed. Ultimately, we provide a critical analysis of the use of V(r) in the predictions of local adsorption susceptibilities, and we address its limitations. The link between V(r) and other established descriptors in catalysis are motivated via physical relations and theoretical derivations; close ties are established between V(r) and the d-band center (ε d ), as well as the surface site stability (BE M ). In conclusion, by comparing the performance of V(r) evaluated on isodensity contours, i.e., the surface electrostatic potential, to that of V(r) evaluated at the nucleus of an atom, we investigate the application space for a directional and an atom-localized version of the V(r) descriptor for catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal property and assessment of biocompatibility of poly(lactic-co-glycolic) acid/graphene nanocomposites

Polymer-matrix nanocomposites based on Poly(lactic-co-glycolic) acid (PLGA) and Graphene platelets (GNPs) were studied. GNPs, nanomaterials with a 2D flat surface, were chosen with or without chemical modification in PLGA/GNP nanocomposites and their microstructure, thermal property, and their compatibility as scaffolds for cell growth were investigated. PLGA/GNP nanocomposites (0, 1, and 5 wt. % of GNPs) were prepared using a solution based technique. Transmission electron microscopy, X-ray diffraction, Differential scanning calorimeter, and Thermogravimetric analyzer were used to analyze morphology and thermal properties. This work demonstrated the role of GNPs flat surface to provide a favorable platform resulting in an enhanced PLGA crystallization. Functionalized GNPs suppress both the thermal stability and the crystallization of PLGA. Finally, to determine the potential usefulness of these scaffolds for biomedical applications, mammalian cells were cultured on various PLGA/GNP nanocomposites (0, 1, and 5 wt. % GNPs). 1 wt. % PLGA/GNP nanocomposites showed better biocompatibility for cell growth with/without graphenes functionalization compared to pure PLGA and 5 wt. % PLGA/GNP. The function of GNPs in PLGA/GNPs (1 wt. %) composites is to provide a stage for PLGA crystallization where cell growth is favored. These results provide strong evidence for a new class of materials that could be important for biomedical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Closing the Nanographene Gap: Surface‐Assisted Synthesis of Peripentacene from 6,6′‐Bipentacene Precursors

Abstract The thermally induced cyclodehydrogenation reaction of 6,6′‐bipentacene precursors on Au(111) yields peripentacene stabilized by surface interactions with the underlying metallic substrate. STM and atomic‐resolution non‐contact AFM imaging reveal rectangular flakes of nanographene featuring parallel pairs of zig‐zag and armchair edges resulting from the lateral fusion of two pentacene subunits. The synthesis of a novel molecular precursor 6,6′‐bipentacene, itself a synthetic target of interest for optical and electronic applications, is also reported. The scalable synthetic strategy promises to afford access to a structurally diverse class of extended periacenes and related polycyclic aromatic hydrocarbons as advanced materials for electronic, spintronic, optical, and magnetic devices.

Rogers, Cameron↗

Improved chemical and electrochemical stability of perovskite oxides with less reducible cations at the surface

Segregation and phase separation of aliovalent dopants on perovskite oxide (ABO 3 ) surfaces are detrimental to the performance of energy conversion systems such as solid oxide fuel/electrolysis cells and catalysts for thermochemical H 2 O and CO 2 splitting. One key reason behind the instability of perovskite oxide surfaces is the electrostatic attraction of the negatively charged A-site dopants (for example, Sr La ') by the positively charged oxygen vacancies (V $••\atop{o}$) enriched at the surface. Here we show that reducing the surface V $••\atop{o}$ concentration improves the oxygen surface exchange kinetics and stability significantly, albeit contrary to the well-established understanding that surface oxygen vacancies facilitate reactions with O 2 molecules. We take La 0.8 Sr 0.2 CoO 3 (LSC) as a model perovskite oxide, and modify its surface with additive cations that are more and less reducible than Co on the B-site of LSC. By using ambient-pressure X-ray absorption and photoelectron spectroscopy, we proved that the dominant role of the less reducible cations is to suppress the enrichment and phase separation of Sr while reducing the concentration of V $••\atop{o}$ and making the LSC more oxidized at its surface. Consequently, we found that these less reducible cations significantly improve stability, with up to 30 times faster oxygen exchange kinetics after 54 h in air at 530 °C achieved by Hf addition onto LSC. Finally, the results revealed a 'volcano' relation between the oxygen exchange kinetics and the oxygen vacancy formation enthalpy of the binary oxides of the additive cations. This volcano relation highlights the existence of an optimum surface oxygen vacancy concentration that balances the gain in oxygen exchange kinetics and the chemical stability loss.

36 MATERIALS SCIENCE↗

Towards non-blinking and photostable perovskite quantum dots

Surface defect-induced photoluminescence blinking and photodarkening are ubiquitous in lead halide perovskite quantum dots. Despite efforts to stabilize the surface by chemically engineering ligand binding moieties, blinking accompanied by photodegradation still poses barriers to implementing perovskite quantum dots in quantum emitters. To date, ligand tail engineering in the solid state has rarely been explored for perovskite quantum dots. We posit that attractive intermolecular interactions between low-steric ligand tails, such as π-π stacking, can promote the formation of a nearly epitaxial ligand layer that significantly reduces the quantum dot surface energy. Here, we show that single CsPbBr 3 quantum dots covered by stacked phenethylammonium ligands exhibit nearly non-blinking single photon emission with high purity (~98%) and extraordinary photostability (12 hours continuous operation and saturated excitations), allowing the determination of size-dependent exciton radiative rates and emission line widths of CsPbBr 3 quantum dots at the single particle level.

36 MATERIALS SCIENCE↗

Ab-initio study of encapsulated and functionalized silicon nanotube with a monoatomically thin Cu wire

First principle calculations based on DFT have been performed to study the interaction of monoatomically thin Cu wire with silicon nanotube in armchair configuration having chirality (6, 6) both by placing it inside (encapsulation) and outside (functionalisation) the tube. The lowest energy for positioning monoatomically thin Cu wire inside and outside surfaces of SiNT were found to possess cohesive energies of 4.03 eV and 4.02 eV respectively and hence the stability of both SiNTs is found to be almost same. However, From the electronic band structures study, the conductance in case of SiNT for the encapsulated and functionalized positioning of the Cu wire have been found to be 2G{sub 0} and 4G{sub 0} respectively showing enhanced conductance for the functionalized SiNT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heteroepitaxial Growth of CZTS

A summary of preparation methods of various substrates suitable for the epitaxial growth of copper zinc tin sulfide (CZTS) via molecular beam epitaxy (MBE) is presented. Substrates evaluated include silicon (various orientations), ZnS(110), Al2O3(0001), and gallium phosphide (GaP) (100). An overview of the techniques used to prepare a high-quality, epi-ready surface for each substrate is covered, with special attention given to the limitations presented by CZTS MBE, namely the stability of surfaces with respect to sulfur vapor. The quality of the substrates prior to growth has been assessed by in-situ reflection high-energy electron diffraction (RHEED) and photoemission techniques. ZnS epitaxial growth was attempted on all substrates because ZnS is viewed as a simplified model system for CZTS. ZnS epitaxial quality was assessed using RHEED during growth and via electron backscatter diffraction (EBSD) post-growth.

14 SOLAR ENERGY↗