Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Photodissociation of methyl iodide adsorbed on low-temperature amorphous ice surfaces

Photodissociation dynamics of methyl iodide (CH{sub 3}I) adsorbed on both amorphous solid water (ASW) and porous amorphous solid water (PASW) has been investigated. The ejected ground-state I({sup 2}P{sub 3/2}) and excited-state I({sup 2}P{sub 1/2}) photofragments produced by 260- and 290-nm photons were detected using laser resonance-enhanced multiphoton ionization. In contrast to gas-phase photodissociation, (i) the I({sup 2}P{sub 3/2}) photofragment is favored compared to I({sup 2}P{sub 1/2}) at both wavelengths, (ii) I({sup 2}P{sub 3/2}) and I({sup 2}P{sub 1/2}) have velocity distributions that depend upon ice morphology, and (iii) I{sub 2} is produced on ASW. The total iodine [I({sup 2}P{sub 3/2})+I({sup 2}P{sub 1/2})+I{sub 2}] yield varies with substrate morphology, with greater yield from ASW than PASW using both 260- and 290-nm photons. Temperature-programmed desorption studies demonstrate that ice porosity enhances the trapping of adsorbed CH{sub 3}I, while pore-free ice likely allows monomer adsorption and the formation of two-dimensional CH{sub 3}I clusters. Reactions or collisions involving these clusters, I atomic fragments, or I-containing molecular fragments at the vacuum-surface interface can result in I{sub 2} formation.

36 MATERIALS SCIENCE↗

Effect of Pt promotion on Ni/Al{sub 2}O{sub 3} for the selective catalytic reduction of NO with hydrogen

Ni/Al{sub 2}O{sub 3} (10 wt.% Ni) and Ni-Pt/Al{sub 2}O{sub 3} (10 wt.% Ni, 0.5 wt.% Pt) were comparatively tested in the hydrogen selective catalytic reduction process (H{sub 2}-SCR), at reaction temperatures below 350°C. Catalytic activity tests consisted in temperature programmed reactions (TPRea) under plug flow conditions from 50 to 350°C, with a temperature rate of 5°C/min, using a feed stream with a reactant ratio NO:H{sub 2} = 1:1.3 and a GHSV of 4500 h{sup −1}. Promotion with Pt increases the catalytic performances of the Ni based catalyst, in respect to NO conversion, N{sub 2} selectivity and N{sub 2} yield. The reaction temperatures for NO conversion above 95% decrease significantly due to Pt addition, from 250°C for Ni/Al{sub 2}O{sub 3} to 125°C for Ni-Pt/Al{sub 2}O{sub 3}. Characterization of catalysts was performed by: X ray powder diffraction (XRD) for the estimation of Ni crystallite size, temperature programmed reduction (TPR) for the catalyst reducibility, temperature programmed desorption of hydrogen (H{sub 2}-TPD) for the investigation of active sites and metal dispersion on the support, N{sub 2} adsorption-desorption isotherms at −196°C for the determination of total specific surface area and pore size distribution, and H/D isotopic exchange on the catalyst surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new Stark decelerator based surface scattering instrument for studying energy transfer at the gas-surface interface

We report on the design and characterization of a new apparatus for performing quantum-state resolved surface scattering experiments. The apparatus combines optical state-specific molecule preparation with a compact hexapole and a Stark decelerator to prepare carrier gas-free pulses of quantum-state pure CO molecules with velocities controllable between 33 and 1000 m/s with extremely narrow velocity distributions. The ultrahigh vacuum surface scattering chamber includes homebuilt ion and electron detectors, a closed-cycle helium cooled single crystal sample mount capable of tuning surface temperature between 19 and 1337 K, a Kelvin probe for non-destructive work function measurements, a precision leak valve manifold for targeted adsorbate deposition, an inexpensive quadrupole mass spectrometer modified to perform high resolution temperature programmed desorption experiments and facilities to clean and characterize the surface.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Laboratory surface astrochemistry experiments

Although several research groups have studied the formation of H{sub 2} on interstellar dust grains using surface science techniques, few have explored the formation of more complex molecules. A small number of these reactions produce molecules that remain on the surface of interstellar dust grains and, over time, lead to the formation of icy mantles. The most abundant of these species within the ice is H{sub 2}O and is of particular interest as the observed molecular abundance cannot be accounted for using gas-phase chemistry alone. This article provides a brief introduction to the astronomical implications and motivations behind this research and the requirement for a new dual atomic beam ultrahigh vacuum (UHV) system. Further details of the apparatus design, characterisation, and calibration of the system are provided along with preliminary data from atomic O and O{sub 2} beam dosing on bare silica substrate and subsequent temperature programmed desorption measurements. The results obtained in this ongoing research may enable more chemically accurate surface formation mechanisms to be deduced for this and other species before simulating the kinetic data under interstellar conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The ion-gas-neutral interactions with surfaces-2 (IGNIS-2) facility for the study of plasma–material interactions

The Ion-Gas-Neutral Interactions with Surfaces-2 (IGNIS-2) surface science facility has been designed at the Pennsylvania State University with the specific purpose of enabling experiments to study plasma–material interactions. This in situ surface modification and characterization facility consists of multiple reconfigurable substations that are connected through a central transfer chamber. This fully connected vacuum system ensures that the physical and chemical properties of samples are not altered between surface modification and analysis. The modification techniques in IGNIS-2 include a low-energy (<300 eV), high-flux (up to 1016 cm−2 s−1) broad-beam ion source, a liquid metal dropper, a lithium injection system, an RF sputter source, and an evaporator. Its characterization techniques include charged particle-based techniques, such as low-energy ion scattering (enabled by two <5 keV ion sources) and x-ray photoelectron spectroscopy, and photon and light-based techniques, such as x-ray fluorescence, multi-beam optical stress sensors, and optical cameras. All of these techniques can be utilized up to mTorr pressures, allowing both in situ and in operando studies to be conducted. Results are presented on lithium wetting experiments of argon-irradiated tungsten-based composites, surface stress measurements of tungsten films during deuterium ion irradiation, and temperature-programmed desorption of deuterium-irradiated graphite to demonstrate the in situ capabilities of this new facility.

Instruments & Instrumentation↗

Simulated Aging of Metal Tritides by Ball Milling Induced Gas Incorporation

The study of tritium aging effects on materials requires a significant time commitment as a consequence of its 12.3-year half-life, making developmental studies prohibitively difficult and expensive. However, detailed knowledge of long-term aging effects is critical to the development of structural and storage materials for future fusion reactor technologies. As a result, multiple approaches to simulated aging effects have been investigated. Here, we report a method of simulated tritium aging achieved though the incorporation of trapped gases via high-energy ball milling of LaNi 4.25 Al 0.75 alloy storage material. Experimental results verify the presence of trapped gases by a combination of temperature programmed desorption and LECO chemical analysis. Following gas incorporation, we find that many of the degraded hydrogen sorption properties found in aged storage materials are reproduced by the ball milled powders.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

FORMATION OF FORMALDEHYDE AND CARBON DIOXIDE ON AN ICY GRAIN ANALOG USING FAST HYDROGEN ATOMS

Formaldehyde (H{sub 2}CO) and carbon dioxide (CO{sub 2}) were produced in collisions of a superthermal, 3 eV beam of H({sup 2}S) atoms with CO molecules adsorbed on a gold surface at 4.8 K. The reaction-generated products were detected and analyzed using the techniques of temperature programmed desorption (TPD), quadrupole mass spectrometry, and a novel application of the Metropolis algorithm, random-walk procedure to identify the unique fractionation patterns of H{sub 2}CO and CO{sub 2} from the patterns of other species such as N{sub 2}, CO, and H{sub 2}O embedded in the CO blanket and devolved in the TPD/mass spectrometry process. Reaction sequences are given to account for the formation of H{sub 2}CO and CO{sub 2}.

79 ASTRONOMY AND ASTROPHYSICS↗

CO{sub 2} FORMATION IN QUIESCENT CLOUDS: AN EXPERIMENTAL STUDY OF THE CO + OH PATHWAY

The formation of CO{sub 2} in quiescent regions of molecular clouds is not yet fully understood, despite CO{sub 2} having an abundance of around 10%-34% H{sub 2}O. We present a study of the formation of CO{sub 2} via the nonenergetic route CO + OH on nonporous H{sub 2}O and amorphous silicate surfaces. Our results are in the form of temperature-programmed desorption spectra of CO{sub 2} produced via two experimental routes: O{sub 2} + CO + H and O{sub 3} + CO + H. The maximum yield of CO{sub 2} is around 8% with respect to the starting quantity of CO, suggesting a barrier to CO + OH. The rate of reaction, based on modeling results, is 24 times slower than O{sub 2} + H. Our model suggests that competition between CO{sub 2} formation via CO + OH and other surface reactions of OH is a key factor in the low yields of CO{sub 2} obtained experimentally, with relative reaction rates of k{sub CO+H}<<k{sub CO+OH}< k{sub H{sub 2}O{sub 2}+H}< k{sub OH+H},k{sub O{sub 2}+H}. Astrophysically, the presence of CO{sub 2} in low A{sub V} regions of molecular clouds could be explained by the reaction CO + OH occurring concurrently with the formation of H{sub 2}O via the route OH + H.

79 ASTRONOMY AND ASTROPHYSICS↗

Formation of ketene (H{sub 2}CCO) in interstellar analogous methane (CH{sub 4})-carbon monoxide (CO) ices: A combined FTIR and reflectron time-of-flight mass spectroscopic study

The formation of ketene (H{sub 2}CCO) in methane-carbon monoxide (CH{sub 4}-CO) ices was investigated upon its exposure to ionizing radiation in the form of energetic electrons at 5.5 K. The radiation-induced nonthermal equilibrium processing of these ices was monitored online and in situ via infrared spectroscopy complimented with post-irradiation temperature programmed desorption studies exploiting highly sensitive reflectron time-of-flight mass spectrometry (ReTOF) coupled with single photon fragment-free photo ionization (PI) at 10.49 eV. The detection of ketene in irradiated (isotopically labeled) methane-carbon monoxide ices was confirmed via the ν{sub 2} infrared absorption band and substantiated during the warm-up phase based on sublimation profiles obtained from the ReTOF-PI spectra of the corresponding isotopic masses. The experiments conducted with the mixed isotopic ices of {sup 12}CD{sub 4}-{sup 13}CO provide clear evidence of the formation of at least two ketene isotopomers (D{sub 2} {sup 12}C{sup 13}CO and D{sub 2} {sup 13}C{sup 13}CO), allowing for the derivation of two competing formation pathways. We have also proposed underlying reaction mechanisms to the formation of ketene based on kinetic fitting of the temporal evolution of the ketene isotopomers.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of the liquid Li-solid Mo (1 1 0) interface from classical molecular dynamics for plasma-facing applications

An understanding of the wetting properties and a characterization of theinterface between liquid lithium (Li) and solid molybdenum (Mo) are relevant to assessing the efficacy of Li as a plasma-facing component in fusion reactors. Here, a new second-nearest neighbor modified embedded-atom method (2NN MEAM) force eld is parameterized to describe the interactions between Li and Mo. The new force eld reproduces several benchmark properties obtained from first-principles quantum mechanics simulations, including binding curves for Li at three different adsorption sites and the corresponding forces on Li atoms adsorbed on the Mo (110) surface. This force field is then used to study the wetting of liquid Li on the (110) surface of Mo and to examine the Li-Mo interface using molecular dynamics simulations. From droplet simulations, we nd that liquid Li tends to completely wet the perfect Mo (110) surface, in contradiction with previous experimental measurements that found non-zero contact angles for liquid Li on a Mo substrate. However, these experiments were not carried out under ultra-high vacuum conditions or with a perfect (110) Mo surface, suggesting that the presence of impurities, such as oxygen, and surface structure play a crucial role in this wetting process. From thin- lm simulations, it is observed that the first layer of Li on the Mo (110) surface has many solid-like properties such as a low mobility and a larger degree of ordering when compared to layers further away from the surface, even at temperatures well above the bulk melting temperature of Li. Our findings are consistent with temperature-programmed desorption experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reflection absorption infrared spectroscopy of the surface chemistry of furfural on Pd(111)

The hydrolysis and subsequent acidic dehydration of biomass leads to the production of smaller oxygenates, including furfural, which can undergo subsequent reactions such as hydrogenation to produce value-added products. Palladium has been found to be an active catalyst for this process. As a result, the surface chemistry of furfural is investigated on a Pd(111) single-crystal surface using reflection-absorption infrared spectroscopy as a basis for understanding the catalytic conversion of furfural to value-added products. Following adsorption at 90 K, furfural adopts a flat-lying geometry at low coverages, but converts to a tilted species as the coverage approaches saturation. Heating to ~175 K forms a tilted η 1 (O) species that appears to deprotonate on heating to above 200 K to form an intermediate with a tilted furyl ring and a carbonyl group close to parallel to the surface. Further heating to ~250 K and above caused this species to decarbonylate to form adsorbed carbon monoxide and an infrared invisible furyl intermediate. This can then undergo a ring-opening reaction to produce further CO and form a C 3 H 3 intermediate that can hydrogenate to produce propylene. Finally, this reaction sequence is in good agreement with previous density functional theory calculations and with the products observed in temperature-programmed desorption.

36 MATERIALS SCIENCE↗

Surface chemistry on a polarizable surface: Coupling of CO with KTaO 3 (001)

Polarizable materials attract attention in catalysis because they have a free parameter for tuning chemical reactivity. Their surfaces entangle the dielectric polarization with surface polarity, excess charge, and orbital hybridization. How this affects individual adsorbed molecules is shown for the incipient ferroelectric perovskite KTaO 3 . This intrinsically polar material cleaves along (001) into KO- and TaO 2 -terminated surface domains. At TaO 2 terraces, the polarity-compensating excess electrons form a two-dimensional electron gas and can also localize by coupling to ferroelectric distortions. TaO 2 terraces host two distinct types of CO molecules, adsorbed at equivalent lattice sites but charged differently as seen in atomic force microscopy/scanning tunneling microscopy. Temperature-programmed desorption shows substantially stronger binding of the charged CO; in density functional theory calculations, the excess charge favors a bipolaronic configuration coupled to the CO. These results pinpoint how adsorption states couple to ferroelectric polarization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Investigation of the Electrochemical Activity of (Ba/Sr)FeO 3-y Anodes

FeO x , SrFeO 3-y (SF), and Ba 0.5 Sr 0.5 FeO 3–y (BSF) were studied for application as fuel oxidation catalysts in solid oxide fuel cells (SOFC) anodes. Electrodes were prepared by impregnation into porous yttria-stabilized zirconia (YSZ), with La 0.3 Sr 0.7 TiO 3–y (LST) added for electronic conductivity. The electrode impedances decreased dramatically upon addition of SF and BSF and much less when only SrO or FeO x were added. Temperature Programmed Desorption (TPD) of O 2 from oxidized BSF showed O 2 desorbing between 200 °C and 700 °C, while no O 2 desorbed from Fe 2 O 3 below 900 °C. The results, together with thermodynamic analysis, suggest that stabilization of Fe +4 in the perovskite lattice plays an important role in enhancing the catalytic activity of SF and BSF by providing access to a Fe 3+ /Fe 4+ redox couple that can accept oxygen anions from the yttria-stabilized zirconia (YSZ) electrolyte. Oxygen is weakly bound to these sites facilitating its reaction with adsorbed H 2 .

Electrochemistry↗

Utilization of a By-product Produced from Oxidative Desulfurization Process over Cs-Mesoporous Silica Catalysts

We investigated the use of Cs-mesoporous silica catalysts to upgrade a by-product of oxidative desulfurization (ODS). Cs-mesoporous silica catalysts were chaeacterized through N2 adsorption, XRD, CO2-temperature-programmed desorption, and XRF. Cs-mesoporous silica prepared by the direct incorporation method showed higher catalytic performance than a Cs/MCM-41 catalyst by impregnation method for the catalytic decomposition of sulfone compounds produced from ODS process.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Final Technical Report for DOE Grant, number DE-FG02-05ER15701; Probing Surface Chemistry Under Catalytic Conditions: Olefin Hydrogenation,Cyclization and Functionalization.

The specific goal of this work was to understanding the catalytic reactions pathways for the synthesis of vinyl acetate over Pd, Au and PdAu alloys. A combination of both experimental methods (X-ray and Auger spectroscopies, low-energy ion scattering (LEIS), low-energy electron diffraction (LEED) and theory (Density Functional Theory (DFT) calculations and Monte Carlo methods under various different reactions) were used to track the surface chemistry and the influence of alloying. The surface intermediates involved in the various reactions were characterized using reflection-absorption infrared spectroscopy and LEED to identify the nature of the surface species and temperature-programmed desorption (TPD) to follow the decomposition pathways and measure heats of adsorption. These results along with those from density functional theoretical calculations were used determine the kinetics for elementary steps. The results from this work showed that the reaction proceeds via the Samanos mechanism over Pd surfaces whereby the ethylene directly couples with acetate to form an acetoxyethyl intermediate that subsequently undergoes a beta-hydride elimination to form the vinyl acetate monomer. The presence of Au was found to modify the adsorption energies and surface coverages of important surface intermediates including acetate, ethylidyne and ethylene which ultimately influences the critical C-H activation and coupling steps. By controlling the surface alloy composition or structure one can begin to control the steps that control the rate and even the mechanism.

36 MATERIALS SCIENCE↗

Fundamental Surface Science of PFCs for Improved Plasma Performance in NSTX-U

This research applies to improving the plasma performance in the National Spherical Torus Experiment-Upgrade (NSTX-U). NSTX-U will extend the high performance plasmas produced and controlled in NSTX by doubling the heating power and extending the pulse duration by a factor of five. Both of these will substantially raise the thermal stress on plasma facing components (PFCs). Liquid metal-based PFCs, in particular lithium, have been used to improve the plasma performance of many tokamaks, but the predictive understanding needed for confident application of liquid metals and coatings in NSTX-U and future machines is in its infancy. Our work is aimed at applying surface analysis techniques to relevant materials and coatings in a controlled laboratory environment to understand the fundamental surface science and measure key properties that will guide the operations and optimize plasma facing materials at the higher temperatures expected in NSTX-U. Current plans for NSTX-U are to begin operations with carbon PFCs and gradually transition to refractory metal PFCs and liquid metal PFCs toward the end of the first 5 years. Accordingly, our research emphasizes the surface science of lithium on PFC substrates comprised of carbon, molybdenum, and stainless steel. Conditioning of these substrates with boron and the influence of impurities, such as water vapor, present in the tokamak environment will be investigated. These studies make quantitative measurements with low energy ion scattering (LEIS) and high-resolution X-ray photoelectron spectroscopy (HR-XPS) to characterize lithium and complex mixed-material deposits on metal single crystals, e.g. molybdenum, and practical alloys. We utilize ultrathin films of these deposits to be able to follow the surface chemistry and determine stoichiometry. The temperature dependence of surface properties and reactivity is a key parameter. Temperature programmed desorption (TPD) mass spectrometry is utilized to measure deuterium uptake and retention by these materials, and vibrational spectroscopy provides crucial information needed on surface species and chemical compounds. Additional measurements probe diffusion of oxygen into bulk lithium and explore lithium diffusion and wetting on molybdenum and stainless steel. The outcomes of these studies contributes to an improved understanding of plasma surface interactions and specific information needed for NSTX-U operations and the future development of lithium-conditioned plasma-facing components in high-heat flux long-pulse scenarios.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microwave-Assisted Production of Polycarbonate Diols using Carbon Dioxide

Carbon dioxide (CO2) is a cheap and readily available resource that can be converted to value-added chemicals including fuels, polymers, and other products. One lucrative option is polycarbonate diols, which are the precursor to polyurethanes that find wide applications in automotive and aerospace industries. The traditional process for the synthesis of polycarbonate diols involves using hazardous phosgene and alcohols in a strongly basic medium that generates significant amounts of salt. Alternately, CO2 can be reacted with alkanediols over CeO2 catalysts to produce polycarbonate diols. For the current work, a microwave-assisted atmospheric flow system was investigated for converting CO2 into polycarbonate diols and was compared against a thermal system. Various parameters such as type and ratio of solvents, and the addition of dehydrating agents for the microwave system was tested. The different CeO2 catalysts used were characterized using Brunauer–Emmett–Teller (BET) surface area analysis, Raman spectroscopy, X-ray diffraction, and temperature programmed desorption (NH3-TPD and CO2-TPD).

CO2 utilization↗

Ni-H-Beta Catalysts for Ethylene Oligomerization: Impact of Parent Cation on Ni Loading, Speciation, and Siting

Ni-H-Beta catalysts for ethylene oligomerization (EO) were prepared by ion exchange of NH 4 -Beta and H-Beta zeolites with aqueous Ni(NO 3 ) 2 and characterized by H 2 -temperature-programmed reduction (TPR), NH 3 -temperature-programmed desorption (TPD), and diffuse-reflectance infrared Fourier-transform spectroscopy (DRIFTS). Quadruple exchange of NH 4 -Beta at 70 °C resulted in 2.5 wt.% Ni loading corresponding to a Ni 2+ /framework aluminum (FAl) molar ratio of 0.52. [NiOH] + and H + are the primary charge-compensating cations in the uncalcined catalyst, as evidenced by TPR and DRIFTS. Subsequent calcination at 550 °C in air yielded a Ni-H-Beta catalyst containing primarily bare Ni 2+ ions bonded to framework oxygens. Quadruple exchange of H-Beta at 70 °C gave 2.0 wt.% Ni loading (Ni 2+ /FAl = 0.41). After calcination at 550 °C, the resulting Ni-H-Beta catalyst comprises a mixture of bare Ni 2+ ions: [NiOH] + and NiO species. The relative abundance of [NiOH] + increases with the number of exchanges. In situ pretreatment at 500 °C in flowing He converted the [NiOH] + species to bare Ni 2+ ions via dehydration. The bare Ni 2+ ions interact strongly with the Beta framework as evidenced by a perturbed antisymmetric T-O-T vibration at 945 cm -1 . DRIFT spectra of CO adsorbed at 20 °C indicate that the Ni 2+ ions occupy two distinct exchange positions. The results of EO testing at 225 °C and 11 bar (ethylene) suggested that the specific Ni 2+ species initially presented (e.g., bare Ni 2+ , [NiOH] + ) did not significantly affect the catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗