Search NASA⌕ Search

SEARCH · Search NASA

Results for “tunneling spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Molecular-Scale Insights into the Heterogeneous Interactions between an m -Terphenyl Isocyanide Ligand and Noble Metal Nanoparticles

The structural and chemical properties of metal nanoparticles are often dictated by their interactions with molecular ligand shells. These interactions are highly material-specific and can vary significantly even among elements within the same group or materials with similar crystal structure. In this study, we surveyed the heterogeneous interactions between an m-terphenyl isocyanide ligand and Au and Ag nanoparticles (NPs) at the single-molecule limit. Specifically, we found that the ligation behavior with this molecule differs significantly between that of Au and AgNPs. Surface-enhanced Raman spectroscopy measurements revealed unique enhancement factors for two molecular vibrational modes between two metal surfaces, indicating different ligand binding geometries. Molecular-level characterization using scanning tunneling microscopy allowed us to directly visualize these variations between Ag and Au surfaces, which we assign as two distinct binding mechanisms. This molecular-scale visualization provides clear insights into the different ligand–metal interactions as well as the chemical behavior and spectroscopic characteristics of isocyanide-functionalized NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probing inhomogeneous cuprate superconductivity by terahertz Josephson echo spectroscopy

Abstract Inhomogeneities crucially influence the properties of quantum materials, yet methods that can measure them remain limited and can access only a fraction of relevant observables. For example, local probes such as scanning tunnelling microscopy have documented that the electronic properties of cuprate superconductors are inhomogeneous over nanometre length scales. However, complementary techniques that can resolve higher-order correlations are needed to elucidate the nature of these inhomogeneities. Furthermore, local tunnelling probes are often effective only far below the critical temperature. Here we develop a two-dimensional terahertz spectroscopy method to measure Josephson plasmon echoes from an interlayer superconducting tunnelling resonance in a near-optimally doped cuprate. The technique allows us to study the multidimensional optical response of the interlayer Josephson coupling in the material and disentangle intrinsic lifetime broadening from extrinsic inhomogeneous broadening for interlayer superconducting tunnelling. We find that inhomogeneous broadening persists up to a substantial fraction of the critical temperature, above which this is overcome by the thermally increased lifetime broadening.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Temperature Measurements in Hypersonic Wind Tunnels via Femtosecond Coherent Anti-Stokes Raman Scattering

A femtosecond coherent anti-Stokes Raman scattering (fs CARS) instrument is developed to perform gas-phase thermometry in cold-flow hypersonic wind tunnels. Measurements are reported for Mach 8 and 14 pure-nitrogen flows. The fs CARS instrument includes a 100 fs pump/Stokes pulse and a spectrally narrow probe pulse from a second harmonic bandwidth compressor. Important experimental considerations such as limits on the pump/Stokes pulse energy are discussed. The fs CARS focusing and collimating optics are mounted on a two-axis translation stage system to scan the measurement location during a 30 second wind tunnel run. Single-laser-shot rotational CARS spectra are recorded at the laser repetition rate of 1 kHz in the wind tunnel freestream and near simple cone models. Spectral fitting is used to determine quantitative gas temperatures. Freestream temperatures at Mach 8 and 14 spanned ranges of 40–75 and 35–50 K, respectively, depending on tunnel operating conditions. Temperature variations across the central 100 mm span of the wind tunnel were quantified. Measured temperature jumps across conical bow shocks from various models varied by less than 1% from predicted values. Hypersonic boundary layer measurements were demonstrated. In conclusion, these measurements illustrate the utility and robustness of this instrument for the study of complex fluid flow phenomena in challenging ground test facilities.

Aerodynamics↗
DOE OSTI2025

Characterizing the surface compositions of supported bimetallic PtSn clusters: Effects of cluster-support interactions and surface adsorbates

PtSn bimetallic clusters on TiO2(110) and highly oriented pyrolytic graphite (HOPG) surfaces have been characterized by scanning tunneling microscopy, low energy ion scattering (LEIS), Xray photoelectron spectroscopy, and temperature programmed desorption (TPD); density functional theory (DFT) calculations have also been performed to better understand adsorption of CO and D2 on the PtSn surfaces. On TiO2 at coverages of 2 ML of Pt and 2 ML of Sn, exclusively bimetallic clusters are formed for both orders of deposition because clusters of the first metal completely cover the surface such that all atoms of the second metal are incorporated into the existing clusters. In contrast, on HOPG, the high mobility and weak cluster-support interactions on HOPG result in much larger 2 ML monometallic clusters (~30 Å high) that do not completely cover the surface, and deposition of the second metal produces larger clusters as well as smaller ones. Despite the difference in cluster morphologies for the different orders of deposition and supports, the LEIS experiments demonstrate that in all cases, the PtSn clusters are rich in Sn at the surface, as expected based on the lower surface free energy for Sn compared to Pt. Furthermore, the +0.2 eV shift in the Sn(3d5/2) binding energy observed on all surfaces in the presence of Pt is consistent with PtSn alloy formation. Deposition of 2 ML of Sn on TiO2 produces two-dimensional clusters with oxidation of Sn and reduction of titania at the clustersupport interface, but addition of Pt to the Sn clusters causes Sn to diffuse away from this interface, leaving Sn in the metallic state. TPD experiments on 2 ML Pt/TiO2 with increasing coverages of Sn show that the number of adsorption sites for D2 sharply decreases to nearly zero at 0.5 ML, while CO adsorption decreases to zero only at much higher Sn coverages of 2 ML. DFT studies for Sn modified Pt surfaces and bulk structures demonstrate that for CO adsorption at low Sn coverages (<0.25 ML), the strong Pt-CO interactions induce diffusion of Pt to the cluster surface and the formation of a bulk Pt3Sn alloy, whereas D2 adsorption does not lead to interactions with the Pt surface that are strong enough to induce alloy formation. A single Sn adatom prevents D2 adsorption on four neighboring Pt atoms via site-blocking and the donation of electron density to Pt.

Li, Fangliang↗
DOE OSTI2023

Morphology Dependent Reactivity of CsO $x$ Nanostructures on Au(111): Binding and Hydrogenation of CO 2 to HCOOH

Cesium oxide (CsO $x$ ) nanostructures grown on Au(111) behave as active centers for CO 2 binding and hydrogenation reactions. The morphology and reactivity of these CsO $x$ systems were investigated as a function of alkali coverage using scanning tunnelling microscopy (STM), ambient pressure X-ray photoelectron spectroscopy (AP-XPS), and density functional theory (DFT) calculations. STM results show that initially (0.05 - 0.10 ML) cesium oxide clusters (Cs 2 O 2 ) grow at the elbow sites of the herringbone of Au(111), subsequently transforming into two-dimensional islands with increasing cesium coverage (> 0.15 ML). XPS measurements reveal the presence of suboxidic (Cs $y$ O; $y$ ≥ 2) species for the island structures. The higher coverages of cesium oxide nanostructures contain a lower O/Cs ratio resulting in a stronger binding of CO 2 . Moreover, the O atoms in the Cs $y$ O structure undergo a rearrangement upon the adsorption of CO 2 which is a reversible phenomenon. Under CO 2 hydrogenation conditions, the small Cs 2 O 2 clusters are hydroxylated, thereby preventing the adsorption of CO 2 . However, the hydroxylation of the higher coverages of Cs $y$ O did not prevent CO 2 adsorption, and the adsorbed CO 2 transformed to HCOO species that eventually yield HCOOH. DFT calculations further confirm that the dissociated H 2 attacks the C in the adsorbate to produce formate, which is both thermodynamically and kinetically favored during the CO 2 reaction with hydroxylated Cs $y$ O. These results demonstrate that cesium oxide by itself is an excellent catalyst for CO 2 hydrogenation that could produce formate, an important intermediate for the generation of value-added species. The role of the alkali oxide nanostructures as active centers, not merely as promoters, may have broad implications wherein the alkali oxides can be considered in the design of materials tuned for specific applications in heterogeneous catalysis.

03 NATURAL GAS↗
DOE OSTI2021

Selective Methane Oxidation to Methanol on ZnO/Cu 2 O/Cu(111) Catalysts: Multiple Site-Dependent Behaviors

Due to the abundance of natural gas in our planet, a major goal is to achieve a direct methane to methanol conversion at medium to low temperatures using mixtures of methane and oxygen. Here, we report an efficient catalyst, ZnO/Cu 2 O/Cu(111), for this process investigated using a combination of reactor testing, scanning tunneling microscopy, ambient-pressure x-ray photoemission spectroscopy, density functional calculations, and kinetic Monte Carlo simulations. The catalyst is capable of methane activation at room temperature and transforms mixtures of methane and oxygen to methanol at 450 K with a selectivity of ~30%. This performance is not seen for other heterogenous catalysts which usually require the addition of water to enable a significant conversion of methane to methanol. The unique coarse structure of the ZnO islands supported on a Cu 2 O/Cu(111) substrate provides a collection of multiple centers that display different catalytic activity during the reaction. ZnO-Cu 2 O step sites are active centers for methanol synthesis when exposed to CH 4 and O 2 due to an effective O-O bond dissociation, which enables a methane-to-methanol conversion with a reasonable selectivity. Upon addition of water, the defected O-rich ZnO sites, introduced by Zn vacancies, show superior behavior towards methane conversion and enhance the overall methanol selectivity to over 80%. Thus, in this case, the surface sites involved in a direct CH 4 → to CH 3 OH conversion are different from those engaged in methanol formation without water. Furthermore, the identification of the site-dependent behavior of ZnO/Cu 2 O/Cu(111) opens a design strategy for guiding efficient methane reforming with high methanol selectivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tri-molybdenum phosphide (Mo 3 P) and multi-walled carbon nanotube junctions for volatile organic compounds (VOCs) detection

Detection and analysis of volatile organic compounds' (VOCs) biomarkers lead to improvement in healthcare diagnosis and other applications such as chemical threat detection and food quality control. Here, we report on tri-molybdenum phosphide (Mo3P) and multiwalled carbon nanotube (MWCNT) junction-based vapor quantum resistive sensors (vQRSs), which exhibit more than one order of magnitude higher sensitivity and superior selectivity for biomarkers in comparison to pristine MWCNT junctions based vQRSs. Transmission electron microscope/scanning tunneling electron microscope with energy dispersive x-ray spectroscopy, x-ray diffraction, and x-ray photoelectron spectroscopy studies reveal the crystallinity and the presence of Mo and P elements in the network. The presence of Mo3P clearly enhanced the performance of vQRS as evidenced in sensitivity and selectivity studies. The vQRSs are stable over extended periods of time and are reproducible, making them a potential candidate for sensing related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Atomic-resolution structural and spectroscopic evidence for the synthetic realization of two-dimensional copper boride

Since the first realization of borophene on Ag(111), two-dimensional (2D) boron nanomaterials have attracted substantial interest because of their polymorphic diversity and potential for hosting solid-state quantum phenomena. Here, we use atomic-resolution scanning tunneling microscopy (STM) and field-emission resonance (FER) spectroscopy to elucidate the structure and properties of atomically thin boron phases grown on Cu(111). Specifically, FER spectroscopy reveals charge transfer and electronic states that strongly differ from the decoupled borophene phases observed on silver, suggesting that the deposition of boron on copper results in strong covalent bonding characteristic of a 2D copper boride. This conclusion is reinforced by detailed STM characterization of line defects that are consistent with density functional theory calculations for atomically thin Cu8B14. This evidence for 2D copper boride is likely to motivate future synthetic efforts aimed at expanding the relatively unexplored family of atomically thin metal boride materials.

Science & Technology - Other Topics↗
DOE OSTI2021

AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors (MISHEMTs) using plasma deposited BN as gate dielectric

AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors (MISHEMTs) were fabricated on Si substrates with a 10 nm boron nitride (BN) layer as a gate dielectric deposited by electron cyclotron resonance microwave plasma chemical vapor deposition. The material characterization of the BN/GaN interface was investigated by X-ray photoelectric spectroscopy (XPS) and UV photoelectron spectroscopy. The BN bandgap from the B1s XPS energy loss is ~5 eV consistent with sp2 bonding. The MISHEMTs exhibit a low off-state current of 1 × 10 –8 mA/mm, a high on/off current ratio of 10 9 , a threshold voltage of –2.76 V, a maximum transconductance of 32 mS/mm at a gate voltage of –2.1 V and a drain voltage of 1 V, a subthreshold swing of 69.1 mV/dec, and an on-resistance of 12.75 Ω·mm. The interface state density (D it ) is estimated to be less than 8.49 × 10 11 cm –2 eV –1 . Gate leakage current mechanisms were investigated by temperature-dependent current–voltage measurements from 300 K to 500 K. The maximum breakdown electric field is no less than 8.4 MV/cm. Poole–Frenkel emission and Fowler–Nordheim tunneling are indicated as the dominant mechanisms of the gate leakage through the BN gate dielectric at low and high electric fields, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of dilute Rh on oxygen dissociation, spillover, and the oxidation of Cu across many orders of magnitude pressure

Knowledge of how trace amounts of more reactive metals influence the oxidation rate and mechanism of Cu surfaces is essential for developing strategies to optimize the performance of Cu-based catalysts. We find that the addition of 1% Rh to Cu(111) increases the initial O 2 dissociation rate by approximately 9-fold. CO poisoning experiments reveal that single Rh atoms activate O 2 and facilitate the spillover of atomic oxygen to Cu sites. Scanning tunneling microscopy (STM) and in situ X-ray photoelectron spectroscopy (XPS) support this mechanism, showing enhanced surface oxygen near Rh atoms. Here, a density functional theory (DFT)-based model demonstrates that Rh binds the O 2 precursor 0.15 eV more strongly than Cu(111) and lowers the O 2 dissociation barrier by 0.02 eV. Both single-crystal and nanoparticle experiments show that at low oxygen pressures, Rh enhances Cu oxidation, whereas at higher pressures, it inhibits deeper oxidation, as evidenced by in situ ultraviolet-visible (UV-vis) spectra.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Understanding the Surface Structure and Catalytic Activity of SnO x /Au(111) Inverse Catalysts for CO 2 and H 2 Activation

Carbon dioxide hydrogenation is a promising approach for the reduction of greenhouse gas pollution via the production of fuels and high-value chemicals utilizing C1 chemistry. In this process, the activation of nonpolar molecules, CO 2 and H 2 , at mild conditions is challenging. In this study, we report a well-defined inverse SnO x /Au(111) catalyst that shows the ability to activate both CO 2 and H 2 at room temperature. Scanning tunneling microscopy (STM) and ambient pressure X-ray photoemission spectroscopy (AP-XPS) are combined to understand the surface structure, growth mode, chemical state, and activity of SnO x /Au(111) surfaces. Nanostructures of SnO x at the sub-monolayer level were prepared by depositing Sn on Au(111) followed by O 2 oxidation. For the as-prepared SnO x /Au(111), two-dimensionally formed SnO x thin films on a Au(111) substrate were observed with STM of two different moieties, discernible based on their height: clusters (~0.4 Å) and nanoparticles (NPs, 1–2.5 Å), which are assigned to Sn–Au alloys and SnO x , respectively, in corroboration with XPS analysis. Furthermore, SnO x /Au(111) was annealed under UHV to test its thermal stability. Upon annealing at 400–600 K, a disappearance of SnO x NPs and reappearance of highly dispersed Sn clusters were clearly noticeable from the STM and XPS results, identifying the thermal decomposition of SnO x and subsequent formation of Sn–Au alloys on the surface due to the recombination of Sn clusters with Au. We investigated the reactivity of the SnO x /Au(111) surfaces toward CH 4 , CO 2 , and H 2 . The SnO x /Au(111) surfaces have excellent CO 2 and H 2 activation abilities even at room temperature with negligible reactivity for methane activation. Our AP-XPS results show that H 2 can be activated on the SnO x NPs by the reduction to Sn. For CO 2 , the activation and further dissociation are identified by a reoxidation of Sn with newly formed Sn–O bonds and the formation of surface carbon. Therefore, we propose that SnO x is a potential catalyst or additive to achieve CO 2 hydrogenation under mild conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Highly Selective Methane to Methanol Conversion on Inverse SnO 2 /Cu 2 O/Cu(111) Catalysts: Unique Properties of SnO 2 Nanostructures and the Inhibition of the Direct Oxidative Combustion of Methane

Direct methane to methanol (CH 4 → CH 3 OH) conversion in heterogeneous catalysis has been a long-standing challenge due to the difficulties in equalizing the activation of methane and protection of the methanol product at the same reaction conditions. Here, we report an inverse catalyst, consisting of small structures of SnO 2 (0.5-1 nm in size) dispersed on Cu 2 O/Cu(111), for highly selective CH 3 OH production from CH 4 . This system was investigated by combining theoretical [density functional theory calculations (DFT), kinetic Monte Carlo simulations (KMC)] and experimental methods [scanning tunneling microscopy (STM), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS)]. The DFT and AP-XPS studies showed that on SnO 2 /Cu 2 O/Cu(111) the conversion of CH 4 by oxygen (O 2 ) preferred complete combustion to carbon dioxide (CO 2 ). The addition of water (H 2 O) enhanced the production of CH 3 OH to nearly 100% selectivity in KMC simulations. This trend was consistent with results of AP-XPS. The presence of water in the reaction environment rendered an extremely high amount of methoxy species (*CH 3 O), a precursor for CH 3 OH production. Further, the high CH 3 OH selectivity of SnO 2 /Cu 2 O/Cu(111) reflected the unique atomic and electronic structure of the supported SnO 2 nanoparticles. As a result, the O 2 adsorption and dissociation, and thus the full combustion of CH 4 to CO 2 , was completely suppressed; while the H 2 O dissociative adsorption was still feasible, providing active hydroxyl species for a truly selective CH 4 to CH 3 OH conversion.

03 NATURAL GAS↗
DOE OSTI2020

Morphology and chemical behavior of model CsO x /Cu 2 O/Cu(111) nanocatalysts for methanol synthesis: Reaction with CO 2 and H 2

Cs is a promoter of Cu-based catalysts for the synthesis of alcohols from CO 2 hydrogenation. Scanning tunneling microscopy and ambient-pressure x-ray photoelectron spectroscopy were used to study the morphology and chemical properties of surfaces generated by the deposition of cesium on Cu 2 O/Cu(111) and Cu(111) substrates. CsO x nanostructures were formed after Cs metal was deposited on Cu 2 O/Cu(111) at 300 K. The formed CsO x protrude over the surface of copper oxide by 2–4 Å, with the dimension at the base of the nanostructures being in the range of 1–3 nm. Heating to elevated temperature induced significant changes in the size and dispersion of the CsO x nanostructures, and there was a clear reconstruction of the copper oxide substrate, which then exhibited long range order with a hexagonally packed structure. The as-deposited and annealed surfaces of CsO x /Cu 2 O/Cu(111) were more reactive toward CO 2 than plain Cu 2 O/Cu(111) or clean Cu(111). Yet, none of them were stable in the presence of H 2 , which fully reduced the copper oxide at 400–450 K. In CsO x /Cu(111), the CsO x nanoclusters were dispersed all over the metallic copper in no particular order. The CsO x species had an average width of 2 nm and ~1 Å height. The CsO x /Cu(111) systems exhibited the highest activity for the binding and dissociation of CO 2 , indicating that the CsO x -copper interface plays a key role in alcohol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

An experimental method for measuring droplet impingement efficiency on two- and three-dimensional bodies

An efficient and accurate method is described for extracting water droplet impingement efficiency data from dye impregnated blotter paper samples obtained by employing a dye-tracer technique in wind tunnel spray tests. The method is based on laser reflectance spectroscopy. A brief description of the test method, instrumentation, and data reduction system is also presented. Preliminary test results and analyses are included for a cylinder and a 65(2)015 airfoil.

Papadakis, M.↗
NASA NTRS1993

Ballistic-Electron-Emission Microscopy Techniques for Nanometer-scale Characterization of Interfaces

Semiconductor interface properties are among the most important phenomena in materials science and technology. The study of metal/semiconductor Schottky barrier interfaces has been the primary focus of a large research and development community for decades. Throughout the long history of interface investigation, the study of interface defect electronic properties have been seriously hindered by the fundamental experimental difficulty of probing subsurface structures. A new method, Ballistic-Electron-Emission Microscopy (BEEM), has been developed which not only enables spectroscopic probing of subsurface interface properties, but also, provides nanometer-resolution imaging capabilities. BEEM employs Scanning Tunneling Microscopy (STM) and a unique spatially localized ballistic electron spectroscopy method...

Bell, L. D.↗
NASA NTRS2016

Consolidated Laser-Induced Fluorescence Diagnostic Systems for the NASA Ames Arc Jet Facilities

The spectroscopic diagnostic technique of two photon absorption laser-induced fluorescence (LIF) of atomic species for non-intrusive arc jet flow property measurement was first implemented at NASA Ames in the mid-1990s. In 2013-2014, NASA combined the agency's large-scale arc jet test capabilities at NASA Ames. Concurrent with that effort, the agency also sponsored a project to establish two comprehensive LIF diagnostic systems for the Aerodynamic Heating Facility (AHF) and Interaction Heating Facility (IHF) arc jets. The scope of the project enabled further engineering development of the existing IHF LIF system as well as the complete reconstruction of the AHF LIF system. The updated LIF systems are identical in design and capability. They represent the culmination of over 20 years of development experience in transitioning a specialized laboratory research tool into a measurement system for large-scale, high-demand test facilities. This paper will document the latest improvements of the LIF system design and demonstrations of the redeveloped AHF and IHF LIF systems.

wind tunnels↗
DOE OSTI2023

Nanoscale Surface Structure of Nanometer-Thick Ferroelectric BaTiO 3 Films Revealed by Synchrotron X-ray Scanning Tunneling Microscopy: Implications for Catalytic Adsorption Reactions

Ferroelectric nanomaterials are of interest in catalysis, non-volatile memory, and neuromorphic computing among other applications because of their switchable structure that can alter electronic and interface properties of a single material. The investigation of the role of polarization on the surface structure and chemistry of ferroelectric nanomaterials is a longstanding challenge, as it ideally requires a combination of both nanoscale imaging and chemical spectroscopy. In this work we study a model ferroelectric BaTiO 3 thin film by synchrotron X-ray scanning tunneling microscopy (SX-STM), a unique method which integrates nanoscale surface imaging and chemically sensitive spectroscopy. We find that polarization switching from downward to upward in (001)single crystalline BaTiO 3 thin films increases the intensity of X-ray absorption across Ba M, Ti L and O K edges. Chemical mapping of nanometer sized domains further demonstrates the modulation of surface structures upon polarization switching, as well as confirming the trends observed in single point experiments across the surface. Here, we complement these measurements with ab-initio computational absorption spectroscopy to elucidate the effect of polarization switching on the core-hole excitations using the Bethe-Salpeter equation approach. Our experimental and theoretical results thus confirm a stronger binding strength for the upward polarized surface with molecular O 2 as a model reactant, offering mechanistic evidence that supports previous reports. This work advances the understanding of the surface chemistry and electronic structure of ferroelectrics, which can ultimately aid strategies to design interfaces with tailored properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Growth Optimization and Device Integration of Narrow‐Bandgap Graphene Nanoribbons

Abstract The electronic, optical, and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom‐up fabrication based on molecular precursors. This approach offers a unique platform for all‐carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for successful device integration, with GNR length being the most critical parameter. In this work, the growth, characterization, and device integration of 5‐atom wide armchair GNRs (5‐AGNRs) are studied, which are expected to have an optimal bandgap as active material in switching devices. 5‐AGNRs are obtained via on‐surface synthesis under ultrahigh vacuum conditions from Br‐ and I‐substituted precursors. It is shown that the use of I‐substituted precursors and the optimization of the initial precursor coverage quintupled the average 5‐AGNR length. This significant length increase allowed the integration of 5‐AGNRs into devices and the realization of the first field‐effect transistor based on narrow bandgap AGNRs that shows switching behavior at room temperature. The study highlights that the optimized growth protocols can successfully bridge between the sub‐nanometer scale, where atomic precision is needed to control the electronic properties, and the scale of tens of nanometers relevant for successful device integration of GNRs.

36 MATERIALS SCIENCE↗