SEARCH · Search NASA

Results for “vortex generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Transition Delay in Hypersonic Boundary Layers via Optimal Perturbations

The effect of nonlinear optimal streaks on disturbance growth in a Mach 6 axisymmetric flow over a 7deg half-angle cone is investigated in an e ort to expand the range of available techniques for transition control. Plane-marching parabolized stability equations are used to characterize the boundary layer instability in the presence of azimuthally periodic streaks. The streaks are observed to stabilize nominally planar Mack mode instabilities, although oblique Mack mode disturbances are destabilized. Experimentally measured transition onset in the absence of any streaks correlates with an amplification factor of N = 6 for the planar Mack modes. For high enough streak amplitudes, the transition threshold of N = 6 is not reached by the Mack mode instabilities within the length of the cone, but subharmonic first mode instabilities, which are destabilized by the presence of the streaks, reach N = 6 near the end of the cone. These results suggest a passive flow control strategy of using micro vortex generators to induce streaks that would delay transition in hypersonic boundary layers.

Boundary layer transition↗

NASA NTRS2017

Application of Sweeping Jet Actuators on the NASA Hump Model and Comparison with CFDVAL2004 Experiments

Flow separation control over a wall-mounted hump model was studied experimentally to assess the performance of sweeping jet actuators. Results were compared to that of the 2004 CFD validation experiment (CFDVAL2004), which examined flow separation control with steady suction and unsteady zero-net-mass-flow actuators. Comparisons were carried out at low and high amplitude excitations. In addition to the active flow control methods, a passive flow control method (i.e., vortex generator) was used to complement the dataset. Steady/unsteady surface pressure measurements and surface oilflow visualization were used in the performance assessment of the actuators. The results indicated that the sweeping jet actuators are more effective than the steady suction and unsteady zero-net-mass-flow actuators. For the same momentum coefficient, the sweeping jet actuators produced more flow acceleration upstream of separation, more pressure recovery downstream, and consistently a smaller separation bubble.

Koklu, Mehti↗

NASA NTRS2017

Self-Latching Piezocomposite Actuator

A self-latching piezocomposite actuator includes a plurality of shape memory ceramic fibers. The actuator can be latched by applying an electrical field to the shape memory ceramic fibers. The actuator remains in a latched state/shape after the electrical field is no longer present. A reverse polarity electric field may be applied to reset the actuator to its unlatched state/shape. Applied electric fields may be utilized to provide a plurality of latch states between the latched and unlatched states of the actuator. The self-latching piezocomposite actuator can be used for active/adaptive airfoils having variable camber, trim tabs, active/deformable engine inlets, adaptive or adjustable vortex generators, active optical components such as mirrors that change shapes, and other morphing structures.

Wilkie, William K.↗

NASA NTRS2018

Analysis of High-Speed Aerodynamics of a Swept Wing with Seamless Flaps

Computational fluid dynamics (CFD) analysis was conducted to evaluate the high-speed aerodynamics of a Gulfstream GIII airplane (Gulfstream Aerospace Corporation, Savannah, Georgia) swept wing modified with an experimental seamless, compliant flap called the Adaptive Compliant Trailing Edge (ACTE) flap for airworthiness. The high-speed aerodynamics of the modified ACTE wing were analyzed at a Mach number of 0.85 and an altitude of 40,000 ft. A polyhedral finite-volume unstructured Reynolds-averaged Navier-Stokes CFD code was used with a two-equation turbulence model. Wing aerodynamics sensitivities to lift coefficients, airplane engine operation, vortex generators (VGs), and ACTE flap deflections were examined. High-speed flow over the clean GIII wing without VGs was found to be complex with outboard shock and boundary-layer interactions causing flow separation over the upper wing surface upstream of the aileron, which could result in buffet and controllability problems at higher lift coefficient values. The VGs were found to improve the high-speed aerodynamics of the clean wing, as expected; however, ACTE flap deflections of as little as 1 to 2 deg were found to negate all of the aerodynamic benefits provided by the VGs at high speeds.

wings↗

NASA NTRS2019

Experimental Investigation of a One-Sided Ejector Nozzle

A fundamental exploratory experiment is conducted assessing the performance of a one-sided ejector with the eventual goal of noise reduction for jet engines. The hardware is comprised of an 8:1 rectangular nozzle together with an ejector box whose lower surface is flush with the lower lip of the nozzle. Secondary flow is allowed through a gap between the upper lip of the nozzle and a flap that constitutes the upper surface of the ejector. Wall static pressures and Pitot probe surveys are conducted to evaluate the performance of the ejector with variation of geometric parameters. It is found that addition of vortex generating tabs at the upper lip of the nozzle significantly increases secondary flow entrainment. The entrainment is further enhanced by a divergence of the ejector up-per surface. Limited noise measurements are done. The baseline ejector (without tabs) often encounters flow resonance with accompanying tones. The tabs have the additional benefit of eliminating those tones in all cases. However, for the tabbed case, addition of the ejector produces insignificant further noise reduction. This is due to the fact that the flow remains unmixed on the lower half of the ejector. The focus of ongoing and future efforts is to achieve sufficient mixing of the flow so that the exhaust velocities are uniformly low, while keeping the ejector hardware short and light-weight.

Zaman, K. B. M. Q.↗

NASA NTRS2019

Experimental Investigation of a One-Sided Ejector Nozzle

A fundamental exploratory experiment is conducted assessing the performance of a one-sided ejector with the eventual goal of noise reduction for jet engines. The hardware is comprised of an 8:1 rectangular nozzle together with an ejector box whose lower surface is flush with the lower lip of the nozzle. Secondary flow is allowed through a gap between the upper lip of the nozzle and a flap that constitutes the upper surface of the ejector. Wall static pressures and Pitot probe surveys are conducted to evaluate the performance of the ejector with variation of geometric parameters. It is found that addition of vortex generating tabs at the upper lip of the nozzle significantly increases secondary flow entrainment. The entrainment is further enhanced by a divergence of the ejector upper surface. Limited noise measurements are done. The baseline ejector (without tabs) often encounters flow resonance with accompanying tones. The tabs have the additional benefit of eliminating those tones in all cases. However, for the tabbed case, addition of the ejector produces insignificant further noise reduction. This is due to the fact that the flow remains unmixed on the lower half of the ejector. The focus of ongoing and future efforts is to achieve sufficient mixing of the flow so that the exhaust velocities are uniformly low, while keeping the ejector hardware short and lightweight.

Ejectors↗

NASA NTRS2019

The Effect of Incoming Boundary Layer Characteristics on the Performance of a Distributed Propulsion System

An experimental study is conducted in an effort to advance the understanding of flow physics associated with a boundary layer ingesting, distributed propulsion system. The influence of incoming boundary layer thickness and flow distortions are studied on the flow downstream and the overall performance of the system. The propulsion model, fabricated using additive manufacturing and integrated with electrical fans, is mounted on a flat plate and tested at subsonic speeds. Detailed characterization of the incoming boundary layer and subsequent assessment of the downstream flow field is performed using hotwire anemometry. Modification of the incoming boundary layer is achieved by placing tripping devices, such as rods and vortex generating ramps, near the leading edge of the flat plate. The overall performance of the system for different incoming flow conditions is analyzed by comparing magnitudes of exhaust velocities as well as estimated propulsive power to the corresponding baseline values. For a constant input power to the fans, smaller upstream flow distortions and moderately thickened boundary layers result in marginal changes in the flow field downstream. On the other hand, notable reductions in downstream flow velocities and propulsive power are observed in the case of a significantly thicker and/or distorted incoming boundary layer. It is hoped that this study will serve as a database for this technologically relevant flow field that has not been explored adequately before.

Propulsion↗

NASA NTRS2019

An Investigation of a Mixer-Ejector Nozzle for Jet Noise Reduction

An experimental study is conducted assessing the performance of an ejector together with an 8:1 aspect ratio rectangular nozzle with the eventual goal of noise reduction for jet engines. Wall static pressure and Pitot probe surveys are conducted to evaluate the performance of the ejector, and sound pressure level measurements are made to assess the impact on noise radiation. It is found that addition of vortex generating tabs at the lip of the nozzle causes large increases in secondary flow entrainment. The baseline ejector (without tabs) often encounters flow resonance with accompanying tones. The tabs have the additional benefit of eliminating those tones. In most cases tried so far, pockets of high-speed fluid remain unmixed. Since jet noise scales as velocity to the eighth power, such ‘hot spots’ defeat the noise reduction goal. In some cases, there is a reduction in noise amplitudes in the mid-frequency range (5-30 kHz), however, an increase occurs on the low frequency end apparently due to flow unsteadiness. This together with a high frequency noise increase caused by the tabs results in minimal reductions in the overall sound pressure level. The focus of ongoing and future efforts is to achieve sufficient mixing and desirable noise reduction while keeping the hard-ware short and lightweight.

Zaman, K. B. M. Q.↗

NASA NTRS2022

Semispan Test Results of an Active Flow Control Enabled High-Lift Common Research Model in Landing Configuration

A 10%-scale semispan, Active Flow Control (AFC) enabled, simplified high-lift version of the Common Research Model (CRM-SHL-AFC) was tested in the 14- by 22-Foot Subsonic Tunnel at the NASA Langley Research Center. The main objective of the test was to develop an AFC system that can provide the necessary lift recovery on a simple-hinged flap high-lift system while minimizing its pneumatic power requirement. Three new types of AFC approaches were examined: Double-Row Sweeping Jets (DRSWJ), Alternating Pulsed Jets (APJ), and High Efficiency Low Power (HELP) actuators. The DRSWJ and the APJ actuators used two rows of unsteady jets, whereas the HELP actuators used an upstream row of sweeping jets combined with a downstream row of steady jets to overcome strong adverse pressure gradients. The test was conducted mostly at a freestream Mach number of 0.20. For exploration purposes, a limited number of runs were made at lower Mach numbers or using vortex generators (VGs). Minimal sensitivity to Mach number or VGs, for the cases evaluated, were observed. The AFC-induced lift coefficient increment was maintained over the AFC-off case for most flow-control cases examined. The CRM-SHL-AFC configuration equipped with HELP actuation was the only actuator configuration able to match or exceed the targeted lift performance of a reference conventional high-lift configuration. The presented aerodynamic data include lift, drag, and pitching moment coefficients as a function of angle of attack, with and without the Transonic Wall Interference Correction System (TWICS) method applied. Lift increments as a function of AFC pneumatic power usage (i.e., nozzle pressure ratio, mass flow, momentum coefficient, and power coefficient) are also presented at a lower angle of attack (α = 8.9°) and at maximum lift (α= 17.1°). At the two angles of attack, the surface pressure distributions and autospectral densities from the unsteady pressure transducers for the AFC-off case and the best HELP actuation case are compared.

high-lift↗

NASA NTRSDate not supplied

BOLT II Roughness-Side Flight Results

An initial review of the roughness data from the BOLT II flight is provided. The BOLT II roughness experiment was designed to investigate discrete trips in flight based on the diamond configuration, which has been shown to be an efficient vortex generator and boundary layer trip from extensive ground-based testing. There were three trip locations chosen for the flight test and their size (height and width) were tailored to the local boundary layer thickness, but all three were expected to trip at the same time or flight condition. Details about the flight vehicle design, instrumentation, and best estimated trajectory are discussed. The present paper is limited to only a review and analysis of the thermocouple data. Boundary layer transition onset times are derived from the thermocouple analysis, thus allowing an initial assessment of the performance of these discrete trips. Since the three trips were sized to trip the boundary layer at the same time, based on a previous wind tunnel study, the present analysis indicates that they performed as expected.

Hypersonic↗

NASA NTRSDate not supplied

Fluidic Fence Flow Control on A 30° Swept Wing in Compressible Freestreams

A 30° swept wing with a NACA 64(3)-618 airfoil cross-section was evaluated in four different freestream conditions with Mach numbers increasing from 0.05 to 0.7 using computational fluid dynamics simulations. Active flow control (AFC) through a streamwise row of vortex generating jets was applied at 70% span, blowing inboard to obstruct the development of spanwise flow and increase lift outboard of the control location. The effectiveness of the AFC was evaluated at α = 5° and 10° as freestream Mach number increased and the AFC mass flow coefficient was held constant. Increases to lift coefficient were reduced at higher Mach numbers, but the ratio of change in lift coefficient and the AFC momentum coefficient remained roughly constant. The fluidic fence caused decreased pressure coefficients on the outboard wing sections, but this region of decreased pressure coefficient moved aft on the chord with increasing Mach number. Mach 0.7 is higher than the critical Mach number of the wing and produced interesting interplay with the AFC, as the suction surface shock moved forward on the inboard wing section but moved aft on the outboard wing section.

Evan J McFadden↗

NASA NTRSDate not supplied

Fluidic Fence Flow Control on A 30° Swept Wing in Compressible Freestreams

Evan J McFadden↗

NASA NTRS1991

A study of blade-vortex interaction sound generation and directionality

The directionality and strength of blade-vortex interactions (BVI) is explained through the radiation cone concept. BVI acoustic radiation is primarily the result of two sound mechanisms: the tip effect, and the radiation cone effect. The radiation cone effect is a highly directional mechanism which results when a lift distribution moves supersonically with respect to the fluid. After a physical explanation of the BVI mechanisms, sample cases using translating and rotating blades interacting with a straight line vortex are shown. The radiation cone concept is then applied to specific rotorcraft cases where it helps to explain zones of intense sound pressure level found in experimental results for the XV-15 tiltrotor and for a BO-105 helicopter scale model.

Ringler, Todd D.↗

NASA NTRS1972

Generation and development of a viscous vortex ring.

The vorticity transport and definition of vorticity equations are derived for an axisymmetric incompressible viscous vortex ring. The coupled system is solved numerically by the Peaceman-Rachford method and the method of successive over-relaxation. Instantaneous streaklines, velocity vector fields, vorticity contours, and streamline patterns offer a detailed picture of vortex ring generation. Results compare well with experimental observations of the behavior of viscous vortex rings. The radius, trajectory, and velocity of the ring are calculated and employed to predict the propagation velocity of the vortex ring using the vortex models of Helmholtz and Hill.

Whitehead, K. D.↗

NASA NTRS1990

An assessment of full potential and Euler solutions for self-generated rotor blade-vortex interactions

An assessment is made of the accuracy and suitability of the three-dimensional full potential and Euler equations in the modeling of subcritical and supercritical rotor blade-vortex interactions (BVI). The interaction velocity fields are obtained through a nonlinear superposition of the rotor and the vortex wake flow fields. Vortex effects are simulated using the velocity 'transpiration' approach. A modified surface condition is prescribed and enforced at each time step of the computations to satisfy the tangency boundary condition. Potential blade-vortex encounters are identified and tracked in time at equal increments of rotor azimuth using the lifting-line helicopter/rotor trim code CAMRAD. This information is then utilized in interpolation routines within the flow solvers to compute the instantaneous position(s) of the interaction vortex element(s) with respect to the blade for the time-accurate calculations. Results for subcritical self-generated BVI and for supercritical interactions resulting from an upstream-generated vortex are presented.

Hassan, A. A.↗

NASA NTRS1962

The Analysis of a Vortex Type Magnetohydrodynamic Induction Generator

Consideration it is given to the performance to the characteristics of an AC magnetohydrodynamic power generator, A rotating magnetic field is imposed on the vortex flow of an electrically conducting fluid, which is injected tangentially into an annulus formed by two nonconducting concentric cylinders and two nonconducting end plates. A perturbation technique is used to determine the two dimensional velocity and three dimensional electromagnetic field and current distributions. Finally, the generated power, the ohmic losses, the effective power and the electrical efficiency of the converter system are calculated.

MAGNETOHYDRODYNAMIC GENERATOR↗

NASA NTRS1984

An experimental study of a vortex/mixing-layer interaction

The first phase of a subsonic experimental investigation of the structure of a longitudinal vortex and the effect of the vortex on a two-stream turbulent mixing layer has been completed. A stable and well-defined longitudinal vortex was generated by mounting a half-delta-wing vortex generator in the wind-tunnel settling chamber. A detailed flow-visualization study, using the smoke-laser technique, was conducted, and X-wire probes were used to measure the mean-flow and turbulence quantities. At the upstream locations, the vortex was found to develop some normal stresses within the core region. The vortex also induced strong secondary motions and small increases in the normal stresses within the mixing layer. The normal stresses then combined with the appropriate mean-velocity gradients to generate shear stresses farther downstream. The results indicate that more sophisticated turbulence models will have to be developed if such complex interactions are to be computed accurately.

Mehta, R. D.↗

NASA NTRS1990

A device for introducing helical perturbations into a trailing line vortex

A perturbation generator has been designed which can be attached to the centerbody of a matched airfoil type vortex generator. The device was desired to enable the introduction of helical-wave, velocity perturbations into a vortex core to permit experimental verification of theoretical vortex stability predictions. Evaluation of the perturbation generator performance, prior to vortex stability studies, has been reported here. Controlled perturbations with frequencies above 200 hz have been produced, but visual observations were insufficient to confirm their helical character. Hot wire velocity spectrum data have confirmed the device's ability to introduce controlled frequency fluctuations. In addition, other flow oscillations have been discussed which can influence the controllability of vortex perturbations.

Ash, Robert L.↗