Search NASA⌕ Search

SEARCH · Search NASA

Results for “AIRPLANE - PERFORMANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Flight measurements of buffet characteristics of the F-104 airplane for selected wing-flap deflections

A flight program was conducted on the F-104 airplane to investigate the effects of moderate deflections of wing leading- and trailing-edge flaps on the buffet characteristics at subsonic and transonic Mach numbers. Selected deflections of the wing leading and trailing-edge flaps, individually and in combination, were used to assess buffet onset, intensity, and frequency; lift curves; and wing-rock characteristics for each configuration. Increased deflection of the trailing-edge flap delayed the buffet onset and buffet intensity rise to a significantly higher airplane normal-force coefficient. Deflection of the leading-edge flap produced some delay in buffet onset and the resulting intensity rise at low subsonic speeds. Increased deflection of the trailing-edge flap provided appreciable lift increments in the angle-of-attack range covered, whereas the leading-edge flap provided lift increments only at high angles-of-attack. The pilots appreciated the increased maneuvering envelope provided by the flaps because of the improved turn capability.

Friend, E. L.↗

Flight evaluations of the effect of advanced control systems and displays on the handling qualities of a general aviation airplane.

Flight tests have shown that, by means of improved displays and advanced control systems, it is possible to transform a typical light airplane into a flying machine that borders on being perfect from a handling-qualities standpoint. A flight-director display and an attitude-command control system used in combination transformed a vehicle with poor handling qualities during ILS approaches in turbulent air into a vehicle with extremely good handling qualities. The attitude-command control system also improved the ride qualities of the airplane. A rate-command control system was less beneficial than an attitude-command control system. Although this paper deals primarily with general aviation aircraft, the results presented pertain to other types of aircraft. Short-takeoff-and-landing (STOL) aircraft would be a natural application of the control systems because, as a result of their low speeds, they encounter many of the handling-qualities problems noted on light aircraft. The improved ride qualities should be of interest to all airline operations, and for STOL aircraft in particular, because of their prolonged exposure to low-altitude turbulence.

Loschke, P. C.↗

Local flow measurements at the inlet spike tip of a Mach 3 supersonic cruise airplane

The flow field at the left inlet spike tip of a YF-12A airplane was examined using at 26 deg included angle conical flow sensor to obtain measurements at free-stream Mach numbers from 1.6 to 3.0. Local flow angularity, Mach number, impact pressure, and mass flow were determined and compared with free-stream values. Local flow changes occurred at the same time as free-stream changes. The local flow usually approached the spike centerline from the upper outboard side because of spike cant and toe-in. Free-stream Mach number influenced the local flow angularity; as Mach number increased above 2.2, local angle of attack increased and local sideslip angle decreased. Local Mach number was generally 3 percent less than free-stream Mach number. Impact-pressure ratio and mass flow ratio increased as free-stream Mach number increased above 2.2, indicating a beneficial forebody compression effect. No degradation of the spike tip instrumentation was observed after more than 40 flights in the high-speed thermal environment encountered by the airplane. The sensor is rugged, simple, and sensitive to small flow changes. It can provide accurate imputs necessary to control an inlet.

Johnson, H. J.↗

Wind tunnel tests of an F-8 airplane model equipped with an oblique wing

An experimental investigation was conducted in an 11- by 11-foot transonic wind tunnel to study the lift, drag and stability characteristics of a 0.087-scale model of an operational airplane fitted with an oblique wing. The model wing was of elliptical planform with an unswept aspect ratio of 12.7 and a thickness of 10 percent. All other external geometric features of the model were scaled to the basic full size operational airplane with the engine inlet faired closed. Longitudinal and lateral-directional stability data were obtained with the wing at sweep angles of 0 deg, 45 deg and 60 deg Test Mach numbers ranged from 0.6 to 1.4 deg Angles of attack were between minus 4 deg and 8 deg at zero sideslip. Angles of sideslip were between plus and minus 4 degrees for two angles of attack depending upon the wing configuration. Tests were conducted at a Reynolds number of 6 million per foot except for a few runs when balance capacity limited the Reynolds number to 4 million per foot.

Graham, L. A.↗

Progress of the X-15 Research Airplane Program

This compilation consists of papers presented at the fourth conference on progress of the X-15 Research Airplane Program held at the NASA Flight Research Center, Edwards Air Force Base, California, October 7, 1965. This conference was sponsored by the Research Airplane Committee of the U.S. Air Force, the U.S. Navy, and the National Aeronautics and Space Administration. Papers were presented by representatives from the NASA Flight Research Center, the NASA Langley Research Center, the U.S. Air Force Flight Test Center, and the U.S. Air Force Aeronautical Systems Division.

Source record↗

Flight investigation of the VFR and IFR landing approach characteristics and terminal area airspace requirements for a light STOL airplane

A flight research program was conducted to determine the terminal area instrument flight capabilities of a light STOL airplane. Simulated (hooded) instrument landing approaches were made using steep single-segment and two-segment glide slopes. A brief investigation was also made of the visual flight terminal area capabilities of the aircraft. The results indicated that the airplane could be flown on a 7 deg glide-slope ILS-type approach in still air with an adequate 3 deg margin for downward correction.

Crane, H. L.↗

Analysis of sonic boom measurements near shock wave extremities for flight near Mach 1.0 and for airplane accelerations

The analysis of the 14 low-altitude transonic flights showed that the prevailing meteorological consideration of the acoustic disturbances below the cutoff altitude during threshold Mach number flight has shown that a theoretical safe altitude appears to be valid over a wide range of meteorological conditions and provides a reasonable estimate of the airplane ground speed reduction to avoid sonic boom noise during threshold Mach number flight. Recent theoretical results for the acoustic pressure waves below the threshold Mach number caustic showed excellent agreement with observations near the caustic, but the predicted overpressure levels were significantly lower than those observed far from the caustic. The analysis of caustics produced by inadvertent low-magnitude accelerations during flight at Mach numbers slightly greater than the threshold Mach number showed that folds and associated caustics were produced by slight changes in the airplane ground speed. These caustic intensities ranged from 1 to 3 time the nominal steady, level flight intensity.

Haglund, G. T.↗

A dynamic pressure generator for checking complete pressure sensing systems installed on an airplane

A portable dynamic pressure generator, how it operates, and a test setup on an airplane are described. The generator is capable of providing a sinusoidal pressure having a peak-to-peak amplitude of 3.5 N/sq cm (5 psi) at frequencies ranging from 100 hertz to 200 hertz. A typical power spectral density plot of data from actual dynamic pressure fluctuation tests within the air inlet of the YF-12 airplane is presented.

Demarco, D. M.↗

A flight investigation with a STOL airplane flying curved, descending instrument approach paths

A flight investigation using a De Havilland Twin Otter airplane was conducted to determine the configurations of curved, 6 deg descending approach paths which would provide minimum airspace usage within the requirements for acceptable commercial STOL airplane operations. Path configurations with turns of 90 deg, 135 deg, and 180 deg were studied; the approach airspeed was 75 knots. The length of the segment prior to turn, the turn radius, and the length of the final approach segment were varied. The relationship of the acceptable path configurations to the proposed microwave landing system azimuth coverage requirements was examined.

Benner, M. S.↗

A forebody design technique for highly integrated bottom-mounted scramjets with application to a hypersonic research airplane

An inviscid technique for designing forebodies which produce uniformly precompressed flows at the inlet entrance for bottom-mounted scramjets has been developed so that geometric constraints resulting from design trade-offs can be effectively evaluated. The flow fields resulting from several forebody designs generated in support of a hypersonic research airplane conceptual design study have been analyzed in detail with three-dimensional characteristics calculations to verify the uniform flow conditions. For the designs analyzed, uniform flow is maintained over a wide range of flight conditions (Mach number equals 4 to 10; angle of attack equals 6 deg to 10 deg) corresponding to scramjet operation flight envelope of the research airplane.

Edwards, C. L. W.↗

Requirements and feasibility study of flight demonstration of Active Controls Technology (ACT) on the NASA 515 airplane

A preliminary design study was conducted to evaluate the suitability of the NASA 515 airplane as a flight demonstration vehicle, and to develop plans, schedules, and budget costs for fly-by-wire/active controls technology flight validation in the NASA 515 airplane. The preliminary design and planning were accomplished for two phases of flight validation.

Gordon, C. K.↗

Noise reduction studies for the Cessna model 337 (0-2) airplane

A study was undertaken to determine the noise reduction potential of the 0-2 airplane in order to reduce its aural detection distance. Static and flyover noise measurements were made to document the noise signature of the unmodified airplane. The results show that significant reductions in aural detection distance can be achieved by the combination of propeller geometry changes and the addition of engine exhaust mufflers. The best results were estimated for the aircraft equipped with a six-blade propeller operating at 3/4 engine speed in combination with a 3.49 cubic foot exhaust muffler installed on each engine. Detection distance for the modified aircraft is estimated to be reduced from about 4-1/4 miles to about 1-1/2 miles when the aircraft is operating at an altitude of 1,000 ft over grassy terrain. Reducing the altitude to 300 ft over a leafy jungle ground cover should reduce the aural detection distance to 0.9 miles. Reduced aural detection distances were also indicated for a modification utilizing a direct-drive six-blade propeller of reduced radius along with smaller exhaust mufflers.

Hilton, D. A.↗

Noise characteristics of the O-1 airplane and some approaches to noise reduction

A brief study of the O-1A airplane to determine possible means for reducing the aircraft aural detection distance was conducted. This effort involved measuring the noise signature of the basic airplane, devising methods to attenuate the noise, and then estimating the effect of several selected modifications on the aural detection distance of the aircraft. A relatively simple modification utilizing a 6.5 ft diameter, six-blade propeller and including a muffler having a volume of 0.725 cu ft is indicated to reduce the aural detection distance of the O-1 aircraft from about 6 miles at an altitude of 1,000 ft and 2 to 3 miles at an altitude of 300 ft to approximately half these values. The flyover noise data suggest that routing the exhaust stacks up and over the wing would provide immediate noise reduction of about 5 dB with an attendant reduction in detection distance. Furthermore, all these studies confirm the work of other investigators that the 1/3 octave band (center frequency=125 cps) is the most critical in reducing aural detection distance.

Connor, A. B.↗

A pilot's opinion of the F-8 digital fly-by-wire airplane

The handling qualities of the F-8 digital fly-by-wire airplane are evaluated by using the Cooper-Harper rating scale. The reasons for the ratings are given, as well as a short description of the flying tasks. It was concluded that the handling qualities of the airplane were good in most situations, although occasional ratings of unsatisfactory were given.

Krier, G. E.↗

Experimental determination of post-stall rotary derivatives for airplane-like configurations at several Reynolds numbers

Military and civilian airplane losses due to out-of-control spin motions are significant. Knowledge of rotary coefficients is necessary to understand the cause of spin entry and to devise proper recovery techniques. An exploratory wind-tunnel investigation has been conducted on simple airplane-like configurations on a rotary sting apparatus at rotation rates up to 10 rps. Rotary coefficients have been measured at unit Reynolds numbers from 2,000,000 to 24,600,000 per m and at angles of attack from 45 to 90 deg. Results show that the aerodynamic characteristics at steady spin rates are highly dependent on both spin rate and Reynolds number.

Clarkson, M. H.↗

High altitude turbulence encountered by the supersonic YF-12A airplane

The present work describes the turbulence experienced by the YF-12A airplane on the basis of airplane acceleration data obtained at altitudes above 12.2 km. Data presented include the subjective intensities reported by the air crew, the portion of flight distance in turbulence, the variation of turbulence with season, and the thickness and length of turbulence patches as determined along the flight path. Compared with that experienced by subsonic jets below 12.2 km, turbulence above 12.2 km was mild, but the crew was more sensitive to gust accelerations during supersonic flight at altitudes above 12.2 km than during subsonic flight at lower altitudes. About 6-8% of the distance traveled was in turbulence between 12.2 and 16.8 km, as compared to less than 1% above 18.3 km. High-altitude turbulence increased by a factor of three from summer to winter. Turbulence patches were 0.4 km thick and 10 km long on the average.

Ehernberger, L. J.↗

Discussion of an aeromechanical gust alleviation system to improve the ride comfort of light airplanes

A discussion of an on-going NASA research project of a gust alleviation system to improve the ride comfort of a light airplane is presented. The discussion includes a description of the proposed system which uses auxiliary aerodynamic surfaces to drive the trailing-edge flaps. The results of analytical work on the effects of the system on stability and effectiveness of the system are presented. Static wind-tunnel tests of the system installed in a 1/6-scale model of a popular light airplane are also described. Problem areas which may need future investigation are discussed.

Stewart, E. C.↗

Design of a V/STOL technology airplane

A two-engine three-fan V/STOL airplane was designed to demonstrate and develop the technology for operational V/STOL and STO-VL aircraft having safe engine-out characteristics. Engine-out requirements, integration of propulsion and aerodynamic controls, and propulsion installation are the major factors affecting the configuration. Use of variable pitch fans enhances the control system providing a responsive and versatile airplane. The ability to operate over the entire flight spectrum from zero speed to M = 0.8 is required to demonstrate operational capability with a V/STOL system.

Zabinsky, J. M.↗