Search NASA⌕ Search

SEARCH · Search NASA

Results for “Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Single-Channel Tricolor Absorption Photometer (STAP) Instrument Handbook

The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s aerosol counting, composition, extinction, and sizing system (ACCESS) includes a base module (9400), a filter sampler (9401), an advanced mixing condensation particle counter (MCPC, 9403), a miniaturized optical particle counter (MOPC, 9405), and a single-channel tricolor absorption photometer (STAP, 9406). This handbook describes the principles and operations of the single-channel tricolor absorption photometer, Model 9406.

47 OTHER INSTRUMENTATION↗

Absorptive corrections to the forward elastic proton-proton analyzing power A N

In the RHIC Polarized Atomic Hydrogen Gas Jet Target (HJET) measurements of the protonproton analyzing power A N (t), absorptive corrections to the electromagnetic form factor were not considered in the data analysis. Recently, these corrections were evaluated theoretically. However, the results were presented in form of integral expressions which were calculated numerically. In this note, the expressions are simplified to make them more suitable for the HJET data analysis. Possible effect of the absorptive corrections in the A N (t) measurement is discussed.

43 PARTICLE ACCELERATORS↗

Computational Analysis of the Effect of Structured Packing Design on Absorption Column Hydrodynamics for Post-Combustion Carbon Capture Applications

Solvent based post-combustion carbon capture technologies have a potential for reducing carbon emissions from fossil-fuel-fired power plants and industrial sources where CO2 emissions are inherently harder to mitigate, such as steel or cement industries. A prominent technology to achieve this is by retrofitting absorption columns to the existing infrastructure. While these systems have been among the less costly alternatives for carbon capture, they still impose a considerable energy penalty to the operation of power plants or industrial facilities. The optimization of CO2 capture rate in solvent-based absorption process is complex as it depends on several factors including CO2 solubility, solvent reaction kinetics and temperature effects on the solubility, reaction rates, surface tension, and thermophysical properties of the solvent and the flue gas. The overall heat and mass transfer also depends on the hydrodynamics, which in turn, is affected by the packing geometry. In the current work, we systematically quantify the effects the design of the structured packing has on the column hydrodynamics, by performing detailed CFD simulations for different geometrical configurations and operating conditions. We then obtain relationships between the key hydrodynamic metrics, such as liquid holdup, interfacial area, wetted area, and pressure drop to the parameters defining the packing geometries and identify new more effective packing designs for the given operating conditions.

Shah, Yash Girish↗

Solid State Quantum Refrigeration Superconducting, Absorption and Measurement Based (Final Technical Report)

During this DOE grant, DE-SC0017890, in place for the past six years, all proposed research was carried out and published in peer-reviewed papers, as well as other projects that emerged during the research. In that effort the research team accomplished all proposed research, as well as many closely related research projects discovered and conceived of during the grant. These works included “Efficient Quantum Measurement Engines”, a work published in Physical Review Letters, giving a theory of quantum measurement-based engines, which uses quantum measurement as a resource. These engines are designed to efficiently convert energy from the stochastic quantum measurement process into useful work. Further publications include “Experimental Realization of a Quantum Dot Energy Harvester”, a joint theory and experimental work in collaboration with the group of Charles Smith in Cambridge, UK, as well as long time theoretical collaborators, Rafael Sánchez and Björn Sothmann. This work, featured as an Editor’s Suggestion in Physical Review Letters, realized an earlier theoretical proposal of ours, whereby two resonant tunneling quantum dots are connected to a central electronic cavity that is heated by a hot energy source. We also published “Superconducting Quantum Refrigerator: Breaking and Rejoining Cooper Pairs with Magnetic Field Cycles” a work done in collaboration with experimentalist Francesco Giazotto from ENS Pisa, Italy, which also resulted in a patent. This paper, published in Phys. Rev. Applied, advanced the concept of a cyclic fridge based on the normal/superconducting phase transition together with layered materials separated by tunnel junctions. We also completed the proposed research on a heat transistor, publishing “Thermal transistor and thermometer based on Coulomb-coupled conductors”, carried out as a collaboration between my group and theorists Splettstoesser (Lund U., Sweden), Sothmann (U. Duisburg-Essen, Germany), and Sánchez (U. Autónoma de Madrid, Spain). We carried out an analysis of a quantum coupled to a quantum point contact as a sensitive thermometer and heat transistor. We found the optimal statistical estimator for the temperature and compared it with experiments on the same type of devices. We also investigated autonomous quantum absorption refrigerators using quantum dots to cool by using a very hot thermal reservoir to drive heat between two other reservoirs. In the article “Quantifying the quantum heat contribution from a driven superconducting circuit”, we demonstrated that for a driven superconducting circuit, we showed heat flow provided by a hot source to the qubit can be switched on and off by varying external parameters, the frequency and the intensity of the driving. In the work “Stochastic thermodynamic cycles of a mesoscopic thermoelectric engine”, we reconsidered the autonomous thermoelectric heat engine in terms of underlying cycles. Rather than periodic behavior, the cycles were stochastic in nature. Nevertheless, by undertaking a graph theoretical analysis of the elementary transport processed, great quantitative and qualitative insight could be found. We also considered the quantum measurement process and showed that a quantum version of Maxwell’s demon could be related to the work extraction of a quantum system, closely related to arrow-of-time measures for quantum measurement, as described in our article “Thermodynamics of quantum measurement and Maxwell's demon's arrow of time”. This work was selected in Phys. Rev. A as an Editor’s Suggestion. A recent preprint titled “Cyclic Superconducting Quantum Refrigerators Using Guided Fluxon Propagation” accomplished an important piece of this grant: to propose a new kind of quantum refrigerator using the dynamics of fluxons in a type II superconductor. This invention envisioned a race-track type geometry where fluxons are confined. By applying a gradient of magnetic field together with electric current in a Corbino geometry, the circulating fluxons can actively cool a cold reservoir, realizing a new type of cyclic superconducting refrigerator. We also investigated the possibility of thermal control from different points of view. The application of quantum measurement to the system gives a new kind of control on the system of interest – we have pioneered this approach and shown that measurement can boost the thermal power of quantum engines as described in “Continuous measurement boosted adiabatic quantum thermal machines”. The ability to have heat flows on demand is an outstanding challenge, and we have provided new solutions to this problem in Thermal control across a chain of electronic nanocavities” for a chain of electron cavities using gating voltage control. The control methods using qubit/qubit coupling to create absorption fridges at their most fundamental level have also been developed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of Piplus - Argon Absorption and Charge Exchange Interactions Using Protodune-sp

ProtoDUNE-SP is a prototype detector for the upcoming Deep Underground Neutrino Experiment (DUNE). It is a Liquid Argon Time Projection Chamber (LArTPC) with a similar configuration to DUNE's detector, and is designed to provide a test-bed for the future experiment. In addition to serving as a prototype, its 0.3 - 7 GeV/ c charged particle beam line provided the ability to perform physics measurements of pions, protons, kaons, muons, and electrons. Importantly, the LArTPC allowed for the measurement of hadronic interactions on argon nuclei.Pions are often present in the final state of neutrino interactions in the energy range of DUNE's neutrino beam. These particles can undergo various types of interactions with argon nuclei in the detector, and this can interfere with the characterization of neutrino interactions in DUNE's far detector. The rate of these so-called secondary interactionswill be accounted for using Monte Carlo simulation of neutrino interactions. Measurements of secondary interaction rates provide necessary data which can be used to estimate and propagate uncertainties or provide tunes of the secondary interaction model used within DUNE's experimental simulation.This analysis provides a simultaneous measurement of the piplus - Ar absorption and charge exchange cross sections using 1 GeV/ c piplus data taken by ProtoDUNE-SP during its initial run period in Fall 2018. This is one of the first hadronic interaction measurements provided by ProtoDUNE-SP. It is also the first piplus - Ar absorption measurement in 20 years and the first ever piplus - Ar charge exchange measurement.Read

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Excited-State Dynamics of All the Mono-cis and the Major Di-cis Isomers of β-Apo-8′-Carotenal as Revealed by Femtosecond Time-Resolved Transient Absorption Spectroscopy

Cis isomers of carotenoids play important roles in light harvesting and photoprotection in photosynthetic bacteria, such as the reaction center in purple bacteria and the photosynthetic apparatus in cyanobacteria. Carotenoids containing carbonyl groups are involved in efficient energy transfer to chlorophyll in light-harvesting complexes, and their intramolecular charge–transfer (ICT) excited states are known to be important for this process. Previous studies, using ultrafast laser spectroscopy, have focused on the central-cis isomer of carbonyl-containing carotenoids, revealing that the ICT excited state is stabilized in polar environments. However, the relationship between the cis isomer structure and the ICT excited state has remained unresolved. In this study, we performed steady-state absorption and femtosecond time-resolved absorption spectroscopy on nine geometric isomers (7-cis, 9-cis, 13-cis, 15-cis, 13′-cis, 9,13′-cis, 9,13-cis, 13,13′-cis, and all-trans) of β-apo-8′-carotenal, whose structures are well-defined, and discovered correlations between the decay rate constant of the S1 excited state and the S0−S1 energy gap, as well as between the position of the cis-bend and the degree of stabilization of the ICT excited state. Our results demonstrate that the ICT excited state is stabilized in polar environments in cis isomers of carbonyl-containing carotenoids and suggest that the position of the cis-bend plays an important role in the stabilization of the excited state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diel cycle impacts on the chemical and light absorption properties of organic carbon aerosol from wildfires in the western United States

Abstract. Organic aerosol (OA) emissions from biomass burning have been the subject of intense research in recent years, involving a combination of field campaigns and laboratory studies. These efforts have aimed at improving our limited understanding of the diverse processes and pathways involved in the atmospheric processing and evolution of OA properties, culminating in their accurate parameterizations in climate and chemical transport models. To bring closure between laboratory and field studies, wildfire plumes in the western United States were sampled and characterized for their chemical and optical properties during the ground-based segment of the 2019 Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) field campaign. Using a custom-developed multiwavelength integrated photoacoustic-nephelometer spectrometer in conjunction with a suite of instruments, including an oxidation flow reactor equipped to generate hydroxyl (OH⚫) or nitrate (NO3⚫) radicals to mimic daytime or nighttime oxidative aging processes, we investigated the effects of multiple equivalent hours of OH⚫ or NO3⚫ exposure on the chemical composition and mass absorption cross-sections (MAC(λ)) at 488 and 561 nm of OA emitted from wildfires in Arizona and Oregon. We found that OH⚫ exposure induced a slight initial increase in absorption corresponding to short timescales; however, at longer timescales, the wavelength-dependent MAC(λ) decreased by a factor of 0.72 ± 0.08, consistent with previous laboratory studies and reports of photobleaching. On the other hand, NO3⚫ exposure increased MAC(λ) by a factor of up to 1.69 ± 0.38. We also noted some sensitivity of aerosol aging to different fire conditions between Arizona and Oregon. The MAC(λ) enhancement following NO3⚫ exposure was found to correlate with an enhancement in CHO1N and CHOgt1N ion families measured by an Aerodyne aerosol mass spectrometer.

54 ENVIRONMENTAL SCIENCES↗

Extending water vapor measurement capability of photon-limited differential absorption lidars through simultaneous denoising and inversion

Abstract. The micropulse differential absorption lidar (MPD) was developed at Montana State University (MSU) and the National Center for Atmospheric Research (NCAR) to perform range-resolved water vapor (WV) measurements using low-power lasers and photon-counting detectors. The MPD has proven to produce accurate WV measurements up to 6 km altitude. However, the MPD's ability to produce accurate higher-altitude WV measurements is impeded by the current standard differential absorption lidar (DIAL) retrieval methods. These methods are built upon a fundamental methodology that algebraically solves for the WV using the MPD forward models and noisy observations, which exacerbates any random noise in the lidar observations. The work in this paper introduces the adapted Poisson total variation (PTV) specifically for the MPD instrument. PTV was originally developed for a ground-based high spectral resolution lidar, and this paper reports on the adaptations that were required in order to apply PTV on MPD WV observations. The adapted PTV method, coined PTV-MPD, extends the maximum altitude of the MPD from 6 to 8 km and substantially increases the accuracy of the WV retrievals starting above 2 km. PTV-MPD achieves the improvement by simultaneously denoising the MPD noisy observations and inferring the WV by separating the random noise from the non-random WV. An analysis with 130 radiosonde (RS) comparisons shows that the relative root-mean-square difference (RRMSE) of WV measurements between RS and PTV-MPD exceeds 100 % between 6 and 8 km, whereas the RRMSE between RS and the standard method exceeds 100 % near 3 km. In addition, we show that by employing PTV-MPD, the MPD is able to extend its useful range of WV estimates beyond that of the ARM Southern Great Plains Raman lidar (RRMSE exceeding 100 % between 3 and 4 km); the Raman lidar has a power-aperture product 500 times greater than that of the MPD.

54 ENVIRONMENTAL SCIENCES↗

Method of fabricating a three-dimensionally patterned mechanical energy absorptive material

A three-dimensionally patterned energy absorptive material and fabrication method having multiple layers of patterned filaments extrusion-formed from a curable pre-cursor material and stacked and cured in a three-dimensionally patterned architecture so that the energy absorptive material produced thereby has an engineered bulk property associated with the three-dimensionally patterned architecture.

Duoss, Eric B.↗

Apparatus and method to measure semiconductor optical absorption using microwave charge sensing

A time-resolved microwave reflectance apparatus comprises a pulsed or modulated optical source that irradiates a semiconductor sample with an excitation pump beam, a microwave oscillator that irradiates the sample with a continuous beam of microwaves, and a microwave detector that detects the microwaves reflected by the sample. Therefore, charge detection, rather than conventional absorption measurements (that detect the loss of photons), can be used to extract the absorption coefficient and band edge of a semiconductor material.

Shaner, Eric A.↗

The encasulation effect on thermal performance of micro-encapsulated phase change materials during energy absorption

Understanding the performance of the thermal storage materials is required to successfully meet the needs of next generation concentrating solar power projects. This study focuses on the thermal characteristics of the micro-encapsulated phase change material (MEPCM) with metallic core under high temperature. A numerical model was developed and verified to study the transient heat absorption process of MEPCMs made of tin, aluminum and copper core. Convective heat transfer rate, total energy absorption and volumetric energy density were presented. The effect of encapsulation on theses variables was analyzed under various boundary and initial conditions. Its impact on characteristic time variables was discussed. The method presented can be adopted to analyzing both manufacturing and application processes for MEPCMs of various compositions, during which melting and solidification happen. Given certain operating conditions, the results from the model can be referenced to obtain optimal thermal performance of these materials.

Benner, Jingru↗

Short pulsewidth high repetition rate nanosecond transient absorption spectrometer

A high-sensitivity nanosecond to millisecond transient absorption spectrometer for measurements of miniscule signals under low excitation intensities includes an excitation source generating a >100 Hz, <5 ns pulsewidth excitation pulse for exciting a light absorbing sample, a probe light source for generating a high photon flux probe light beam producing an average irradiance greater than 1 μW m-2 nm-1 for measuring the transient absorption spectrum of the sample before and after excitation by the excitation source, a DC-coupled detector capable of measuring light for enabling synchronous measurement of both the transmission of the probe light beam and the change in transmission of the probe light beam between a signal with the excitation pulse present and a signal in the absence of the excitation pulse, and a digital oscilloscope with a trigger rearm time capable of collecting every trigger event at frequencies including 1MHz, for enabling sequential noise subtraction protocols.

Rimshaw, Adam↗

Absorption cycle apparatus and related method

An absorption cycle apparatus including a working fluid is presented. The working fluid includes a metal halide, water and a zwitterion additive, wherein the zwitterion additive includes an amino acid, 2,2′-[(phosphonomethyl)imino]diaceticacid, 3-[(2-hydroxyethyl)amino]-1-propanesulfonic acid, or combinations thereof. A method of controlling crystallization in a working fluid of an absorption cycle apparatus is also presented.

Tang, Ching-Jen↗

High absorption photovoltaic material and methods of making the same

A high absorption photovoltaic material and method of making the material for use in a solar cell are disclosed. The photovoltaic material includes a surface modified with a layer of repeating photonic crystal structures. The photonic crystal structures are approximately inverse conically shaped and have a curved sidewall that has an approximately Gaussian shape. The photonic crystal structures generally have a high vertical depth and sidewall angle. The structures also have a gradient refractive index profile and exhibit the parallel-to-interface refraction light trapping effect. An anti-reflective coating is disposed over the photonic crystal structure layer. The photovoltaic material exhibits near unity light absorption over a broad range of visible and near infrared wavelengths and incidence angles, even at reduced thicknesses. The photovoltaic structures are formed via a combined photolithography and reactive-ion etching method at low power with a gas mixture having a high ratio of an etchant component to a passivation component.

Kuang, Ping↗

Simulation Studies of Electromagnetic Energy Absorption by Hydride Materials

This paper investigates the key parameters that contribute to electromagnetic (EM) energy absorption and heating of hydride materials which could be used to release hydrogen for use as a fuel. Our simulation study using COMSOL focuses on EM energy absorption and resulting temperature rise in a thin circular slab of hydride material using resonant dipole and loop antennas. Presented results delineate the effects of conductivity, relative permeability, antenna type and slab size on temperature rise when the distance and amount of RF power are kept fixed.

Brown, Michael A.↗

Harnessing Neural Networks for Elucidating X-ray Absorption Structure–Spectrum Relationships in Amorphous Carbon

Improved understanding of structural and chemical properties through local experimental probes, such as X-ray absorption near-edge structure (XANES) spectroscopy, is crucial for the understanding and design of functional materials. In recent years, significant advancements have been made in the development of data science approaches for the automated interpretation of XANES structure–spectrum relationships. However, existing studies have primarily focused on crystalline solids and small molecules, while fewer efforts have been devoted to disordered systems. Thus, in this work, we demonstrate the development of neural network models for predicting and interpreting XANES spectra of amorphous carbon (a-C) from local structural descriptors. Comparison between different structural descriptors expectedly shows that the inclusion of both bond length and bond angle information is necessary for an accurate prediction of the spectra. Among the descriptors considered in this work, we find that the local many-body tensor representation yields the highest accuracy and greatest interpretability so that it can be leveraged to understand the importance of structural motifs in determining XANES spectra. Furthermore, we also discuss performance of neural network models for predicting both local structure features, such as bond lengths and bond angles, and global chemical composition, such as the sp:sp 2 :sp 3 ratio.

36 MATERIALS SCIENCE↗

Synchrotron based transient x-ray absorption spectroscopy for emerging solid-state energy materials

The rational design of cutting-edge materials for an efficient solar energy conversion process is a challenging task, which demands a fundamental understanding of the mechanisms operative during the photoinduced physical and chemical reactions. In response to these issues, progress in the field has steered attention toward the use of time-resolved spectroscopic techniques to resolve the multiple intermediate species involved in these photoinduced reactions. Thanks to the advent of pump–probe technique, which leads to the development of various time-resolved spectroscopic methods, significant progress has been made in understanding the photophysical and photochemical properties (e.g., excited state dynamics, charge transfer mechanism, charge separation dynamics, etc.) of energy materials. Synchrotron-based x-ray transient absorption (XTA) spectroscopy is one of the most important time-resolved techniques to unravel the direct correlation of the material structure with their photophysical properties owing to its unique capability in directly observing electronic and structural evolution simultaneously. As a result, the aim of this work is to provide a systematic overview of the recent progress in using XTA for capturing the structural dynamics associated with excited state and charge separation dynamics in emerging solid-state energy materials.

14 SOLAR ENERGY↗

Unveiling X-ray absorption signatures of boron nitride via first-principles simulation and machine learning

Boron nitride (BN) allotropes hold great promise in many advanced applications ranging from optical and photonic devices to energy storage and battery systems to tribological components. The diverse functionalities of this material stem from BN’s highly tunable structural and electronic properties, which are governed by the versatile boron–nitrogen bonding configurations. Exploring the structural landscape of BN can unveil novel structures possessing unique properties suited for specific applications, therefore accelerating the design of next-generation advanced functional materials. In this work, we leverage boron K-edge X-ray absorption spectroscopy (XAS) as an effective probe for local structural features and chemical environments. A total of 210 BN crystal structures are generated via analogies to the extensive array of carbon allotropes, and XAS is simulated for each unique local motif within the resulting collection of structures. A mapping between structural features and spectral signatures was established by synergizing first-principle simulations with data-driven based post-analysis approaches. Specifically, we developed a neural network model that can satisfactorily predict spectra line shapes from local structural descriptors. Toward automatic spectroscopic interpretation of any new BN structures, supervised machine learning models, trained on this structure–spectrum dataset, can accurately infer local coordination environments from simulated XAS, highlighting the strength of this unique approach of combining high-fidelity first-principles simulation and machine-learning to accelerate target design of novel BN materials via rational understanding of local structure-spectrum correlations.

36 MATERIALS SCIENCE↗