SEARCH · Search NASA

Results for “Aries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS2011

Fire Return Interval Within the Northern Boundary of the Larch Forest

Larch (Larix spp.) dominant forests compose a large proportion of the forests of Russia (i.e., about 40% of forested areas). These forests range from the Yenisei ridge on the west to the Pacific Ocean on the east, and from Lake Baikal on the south to the 73rd parallel in the north. Larch stands comprise the world s northern most forest at Ary-Mas (72 deg 28' N, 102 deg 15' E). Larch dominated forests occupy about 70% of the permafrost areas in Siberia. Larch forms high closure stands as well as open forests, and is found mainly over permafrost, where other tree species barely survive. Wildfires are typical for this territory with the majority occurring as ground fires due to low crown closure. Due to the thin active layer in permafrost soils and a dense lichen-moss cover, ground fires may cause stand mortality. The vast areas of larch-dominant forests is generally considered as a "carbon sink"; however, positive long-term temperature trends at higher latitudes are expected to result in an increase of fire frequency, and thus may convert this area to a source for greenhouse gases. There are recent observations regarding the increase of fire frequency within non-protected territories. Surprisingly, there are few publications on fire chronoseqences for the huge forested territory between the Ural Mountains and the Pacific Ocean. Also there is a general understanding that bimodal (late spring -- early summer and late summer-beginning of fall) fire seasonal distribution in the south becomes uni-modal (late spring -- early summer) in the north. The purpose of this study is to investigate the wildfire history at the northern edge of the zone of larch dominance.

Kharuk, V. I.↗

NASA NTRS2009

Battery and Fuel Cell Development for NASA's Constellation Missions

NASA's return to the moon will require advanced battery, fuel cell and regenerative fuel cell energy storage systems. This paper will provide an overview of the planned energy storage systems for the Orion Spacecraft and the Aries rockets that will be used in the return journey to the Moon. Technology development goals and approaches to provide batteries and fuel cells for the Altair Lunar Lander, the new space suit under development for extravehicular activities (EY A) on the Lunar surface, and the Lunar Surface Systems operations will also be discussed.

Manzo, Michelle A.↗

NASA NTRS2009

Battery and Fuel Cell Development for NASA's Exploration Missions

NASA's return to the moon will require advanced battery, fuel cell and regenerative fuel cell energy storage systems. This paper will provide an overview of the planned energy storage systems for the Orion Spacecraft and the Aries rockets that will be used in the return journey to the Moon. Technology development goals and approaches to provide batteries and fuel cells for the Altair Lunar Lander, the new space suit under development for extravehicular activities (EVA) on the Lunar surface, and the Lunar Surface Systems operations will also be discussed.

Manzo, Michelle A.↗

NASA NTRS2009

NASA Glenn Research Center Battery Activities Overview

This paper will provide an overview of the planned energy storage systems for the Orion Spacecraft and the Aries rockets that will be used in the return journey to the Moon and GRC's involvement in their development. Technology development goals and approaches to provide batteries and fuel cells for the Altair Lunar Lander, the new space suit under development for extravehicular activities (EVA) on the Lunar surface, and the Lunar Surface Systems operations will also be discussed.

Manzo, Michelle A.↗

NASA NTRS2012

Adaptive Sampling of Time Series During Remote Exploration

This work deals with the challenge of online adaptive data collection in a time series. A remote sensor or explorer agent adapts its rate of data collection in order to track anomalous events while obeying constraints on time and power. This problem is challenging because the agent has limited visibility (all its datapoints lie in the past) and limited control (it can only decide when to collect its next datapoint). This problem is treated from an information-theoretic perspective, fitting a probabilistic model to collected data and optimizing the future sampling strategy to maximize information gain. The performance characteristics of stationary and nonstationary Gaussian process models are compared. Self-throttling sensors could benefit environmental sensor networks and monitoring as well as robotic exploration. Explorer agents can improve performance by adjusting their data collection rate, preserving scarce power or bandwidth resources during uninteresting times while fully covering anomalous events of interest. For example, a remote earthquake sensor could conserve power by limiting its measurements during normal conditions and increasing its cadence during rare earthquake events. A similar capability could improve sensor platforms traversing a fixed trajectory, such as an exploration rover transect or a deep space flyby. These agents can adapt observation times to improve sample coverage during moments of rapid change. An adaptive sampling approach couples sensor autonomy, instrument interpretation, and sampling. The challenge is addressed as an active learning problem, which already has extensive theoretical treatment in the statistics and machine learning literature. A statistical Gaussian process (GP) model is employed to guide sample decisions that maximize information gain. Nonsta tion - ary (e.g., time-varying) covariance relationships permit the system to represent and track local anomalies, in contrast with current GP approaches. Most common GP models are stationary, e.g., the covariance relationships are time-invariant. In such cases, information gain is independent of previously collected data, and the optimal solution can always be computed in advance. Information-optimal sampling of a stationary GP time series thus reduces to even spacing, and such models are not appropriate for tracking localized anomalies. Additionally, GP model inference can be computationally expensive.

Thompson, David R.↗

NASA NTRS2010

Performance of Low-Density Parity-Check Coded Modulation

This paper reports the simulated performance of each of the nine accumulate-repeat-4-jagged-accumulate (AR4JA) low-density parity-check (LDPC) codes [3] when used in conjunction with binary phase-shift-keying (BPSK), quadrature PSK (QPSK), 8-PSK, 16-ary amplitude PSK (16- APSK), and 32-APSK.We also report the performance under various mappings of bits to modulation symbols, 16-APSK and 32-APSK ring scalings, log-likelihood ratio (LLR) approximations, and decoder variations. One of the simple and well-performing LLR approximations can be expressed in a general equation that applies to all of the modulation types.

Hamkins, Jon↗

NASA NTRS2013

Free Space Laser Communication Experiments from Earth to the Lunar Reconnaissance Orbiter in Lunar Orbit

Laser communication and ranging experiments were successfully conducted from the satellite laser ranging (SLR) station at NASA Goddard Space Flight Center (GSFC) to the Lunar Reconnaissance Orbiter (LRO) in lunar orbit. The experiments used 4096-ary pulse position modulation (PPM) for the laser pulses during one-way LRO Laser Ranging (LR) operations. Reed-Solomon forward error correction codes were used to correct the PPM symbol errors due to atmosphere turbulence and pointing jitter. The signal fading was measured and the results were compared to the model.

laser communication↗

NASA NTRS2013

Simultaneous Laser Ranging and Communication from an Earth-Based Satellite Laser Ranging Station to the Lunar Reconnaissance Orbiter in Lunar Orbit

We report a free space laser communication experiment from the satellite laser ranging (SLR) station at NASA Goddard Space Flight Center (GSFC) to the Lunar Reconnaissance Orbiter (LRO) in lunar orbit through the on board one-way Laser Ranging (LR) receiver. Pseudo random data and sample image files were transmitted to LRO using a 4096-ary pulse position modulation (PPM) signal format. Reed-Solomon forward error correction codes were used to achieve error free data transmission at a moderate coding overhead rate. The signal fading due to the atmosphere effect was measured and the coding gain could be estimated.

fee-space optical communication↗

NASA NTRS2015

Retrieved Products from Simulated Hyperspectral Observations of a Hurricane

Demonstrate via Observing System Simulation Experiments (OSSEs) the potential utility of flying high spatial resolution AIRS class IR sounders on future LEO and GEO missions.The study simulates and analyzes radiances for 3 sounders with AIRS spectral and radiometric properties on different orbits with different spatial resolutions: 1) Control run 13 kilometers AIRS spatial resolution at nadir on LEO in Aqua orbit; 2) 2 kilometer spatial resolution LEO sounder at nadir ARIES; 3) 5 kilometers spatial resolution sounder on a GEO orbit, radiances simulated every 72 minutes.

Spatial Resolution↗

NASA NTRS2017

The 2018 Meteor Shower Activity Forecast for Earth Orbit

A number of meteor showers - the Ursids, Perseids, Leonids, eta Aquariids, Orionids, Draconids, and Andromedids - are predicted to exhibit increased rates in 2018. However, no major storms are predicted, and none of these enhanced showers outranks the typical activity of the Arietids, Southern delta Aquariids, and Geminids at small particle sizes. The MSFC stream model1 predicts higher than usual activity for the Ursid meteor shower in December 2018. While we expect an increase in activity, rates will fall short of the shower's historical outbursts in 1945 and 1986 when the zenithal hourly rate (ZHR) exceeded 100. Instead, the expected rate for 2018 is around 70. The Perseids, Leonids, eta Aquariids, and Orionids are expected to show mild enhancements over their baseline activity level in 2018. In the case of the Perseids, we may see an additional peak in activity a few hours before the traditional peak, but we do not expect activity levels as high as those seen in 2016 and 2017. The eta Aquariids and Orionids, which belong to a single meteoroid stream generated by comet 1P/Halley, are thought to have a 12-year activity cycle and are currently increasing in activity from year to year. Finally, we may see minor outbursts of the Draconids and Andromedids in 2018. Both showers have been difficult to model and have produced unexpected outbursts in recent years (the Draconids in 2012 and the Andromedids in 2011 and 2013). The Andromedids may produce two peaks, both of which are listed in Table 2. This document is designed to supplement spacecraft risk assessments that incorporate an annual averaged meteor shower flux (as is the case with all NASA meteoroid models). Results are presented relative to this baseline and are weighted to a constant kinetic energy. Two showers - the Daytime Arietids (ARI) and the Geminids (GEM) - attain flux levels approaching that of the baseline meteoroid environment for 0.1-cm-equivalent meteoroids. This size is the threshold for structural damage. These two showers, along with the Quadrantids (QUA) and Ursids (URS), exceed the baseline flux for 0.3-cm-equivalent particles, which is near the limit for pressure vessel penetration. Please note, however, that meteor shower fluxes drop dramatically with increasing particle size. For example, the Arietids contribute a flux of about 2x10-6 meteoroids m-2 hr-1 in the 0.04-cm-equivalent range, but only 4x10(exp -9) meteoroids sq m/hr for the 0.3-cm-equivalent and larger size regime. Thus, a PNP risk assessment should use the flux and flux enhancements corresponding to the smallest particle capable of penetrating a component, because the flux at this size will be the dominant contributor to the risk.

Moorhead, Althea↗

NASA NTRS2018

Forming Perchlorates on Mars Through Plasma Chemistry During Dust Events

We report experimental evidences to support a new formation mechanism, multiphase redox plasma chemistry, for perchlorate on Mars observed during the Phoenix mission, whose high concentrations and high ClO4/Cl ratio cannot be fully interpreted by photochemistry. This chemical reaction occurs between Cl-bearing minerals on the Mars surface and free radicals generated by electrostatic discharge (ESD) during Mars dust events (dust storms, dust devils, and grain saltation). We conducted simulated ESD experiments in a Mars chamber with pure CO2, CO2+H2O(g), and Mars Simulate Gas Mixture at Martian atmospheric pressure. We directly observed (1) the instantaneous generation of atmospheric free radicals CO2+, CO+, OI, HIII, HII, OH, ArI, N2, and N2+in normal glow discharge (NGD), detected by in situ plasma emission spectroscopy, and O3by UV and Mid-IR spectroscopy; (2) the fast transformation of NaCl to NaClO3and NaClO4detected by laser Raman spectroscopy, with oxychlorine enrichment at the sample surfaces confirmed by ion chromatography. Through two sets of experimental comparison, we found that the oxidation power of ESD-electron is three orders of magnitude higher than that of UVC-photon. We scaled our experimental results to the modeled ESD in Mars dust events and Mars surface UV radiation level, and concluded that plasma chemistry occurred during Mars dust events can be an additional important formation mechanism for the large amounts of perchlorates observed during various missions to Mars.

Wu, Zhongchen↗

NASA NTRS2020

Automated Cardiovascular Pathology Assessment using Semantic Segmentation and Ensemble Learning

Cardiac magnetic resonance imaging provides high spatial resolution, enabling improved extraction of important functional and morphological features for cardiovascular disease staging. Segmentation of ventricular cavities and myocardium in cardiac cine sequencing provides a basis to quantify cardiac measures such as ejection fraction. A method is presented that curtails the expense and observer bias of manual cardiac evaluation by combining semantic segmentation and disease classification into a fully automatic processing pipeline. The initial processing element consists of a robust dilated convolutional neural network architecture for voxel-wise segmentation of the myocardium and ventricular cavities. The resulting comprehensive volumetric feature matrix captures diagnostic clinical procedure data and is utilized by the final processing element to model a cardiac pathology classifier. Our approach evaluated anonymized cardiac images from a training data set of 100 patients (4 pathology groups, 1 healthy group, 20 patients per group) examined at the University Hospital of Dijon. The top average Dice index scores achieved were 0.940, 0.886, 0.849 for structure segmentation of the left ventricle (LV), myocardium and right ventricle (RV) respectively. A 5-ary pathology classification accuracy of 90% was recorded on an independent test set using the trained model. Performance results demonstrate potential for advanced machine learning methods to deliver accurate, efficient and reproducible cardiac pathological assessment.

Semantic Segmentation↗

NASA NTRS2018

Automated Semantic Segmentation for Volumetric Cardiovascular Feature Quantification and Pathology Assessment

We present a pipeline method that curtails the expense and observer bias of manual cardiac evaluation by combining semantic segmentation and disease classification as a fully automatic processing pipeline. The initial element consists of a 2D U-Net convolutional neural network architecture for voxel-wise segmentation of the myocardium and ventricular cavities. The results of the segmentation were used to compute a comprehensive volumetric feature matrix that captured diagnostic clinical procedure data and that was used to model a cardiac pathology classifier.Our approach evaluated anonymized parasternal MRI cardiac images from a database of 100 patients (4 pathology groups, 1 healthy group, 20 patients per group) examined at the University Hospital of Dijon. We achieved top average Dice index scores of 0.939, 0.849, 0.886 for structure segmentation of the left ventricle (LV), right ventricle (RV) and myocardium respectively. A 5-ary pathology classification accuracy of 90% was recorded on an independent test set using our trained model.

Lindsey, Tony↗

NASA NTRSDate not supplied

Uncertainty in Observational Estimates of the Aerosol Direct Radiative Effect and Forcing

Aerosols continue to be responsible for the largest uncertainty in determining the anthropogenic radiative forcing of the climate. To both reconcile the large range in satellite-based estimates of the aerosol direct radiative effect (DRE, the direct interaction with solar radiation by all aerosols) and to optimize the design of future observing systems, we build a framework for assessing uncertainty in aerosol DRE and the aerosol direct radiative forcing (DRF, the radiative effect of just anthropogenic aerosols, RF_ari). Shortwave aerosol radiative kernels (Jacobians) were derived using the MERRA-2 reanalysis data. These radiative kernels are used to compute a lower-bound on the systematic uncertainty in observational estimates of the aerosol DRE/DRF by making the optimistic assumption that global aerosol observations can be made with the accuracy found in the Aerosol Robotic Network (AERONET) sun photometer retrievals. The total uncertainty is shown to be dominated by contributions from the aerosol single scattering albedo uncertainty. These uncertainty estimates were compared to a literature survey of mostly satellite-based aerosol DRE/DRF values. Comparisons to previous studies reveal that most have significantly underestimated the aerosol DRE uncertainty. Past estimates of the aerosol DRF uncertainty are smaller (on average) than our optimistic observational estimates, including the aerosol DRF uncertainty given in the Intergovernmental Panel on Climate Change (IPCC) fifth assessment report (AR5).

Tyler James Thorsen↗

NASA NTRSDate not supplied

Uncertainty in Observational Estimates of the Aerosol Direct Radiative Effect and Forcing

Tyler James Thorsen↗

DOE OSTI2021

Composites and additive manufacturing for high-field coil supports for stellarators

The utilization of composites layered on an additive manufactured substrate, for the production of coil supports for modular coils in small or middle size experimental stellarators is assessed. The focus of the study is a monolithic coil support comprising the coils of a half-period of a stellarator, somewhat similar to the ones in UST_2 and ARIES-CS stellarators. However, the concept may be applicable to quasi-monolithic coil supports (coil forms of NCSX type) or individual coil casings (W7-X type).Coil supports for stellarators require high precision, stiffness and strength for large contorted parts. Traditionally, monolithic coil supports are produced by steel casting/forging and final machining. This production method and material gives accurate, stiff and strong coil supports, but the method may be expensive for monolithic supports due to the geometrical complexity and required accuracy of the structure. In relation to those matters, this work investigates whether a monolithic coil support comprising an additive manufactured resin substrate, which is externally (outward from the coils) surrounded with a thick layer of fibre-reinforced resin, may achieve enough strength and stiffness under middle/high magnetic fields. Finite element calculations are produced to obtain the direction of the principal stresses and their values in compression and tension at different areas of the monolithic support, which is relevant for anisotropic materials. The feasibility of directional application of (carbon) fibres on the winding surface of the stellarator outward from the coils is experimentally tested on a scaled-down additively manufactured prototype of a monolithic support. The strength and stiffness of the composite structure appears sufficient for common magnetic fields in experimental stellarators, and the 3D-composite design and manufacturing was technically feasible.

Queral, Vicente↗

DOE OSTI2022

ARIES/Flatirons Facility - Hydrogen System Capability Buildout

Under the "Advanced Research on Integrated Energy Systems" (ARIES) initiative, hydrogen system capabilities including a MW-scale electrolyzer, storage system, and MW-scale fuel cell generator will be designed and commissioned at NREL's Flatirons Campus. This hydrogen infrastructure will support H2@Scale goals by enabling integrated systems R&D to study the science of scaling for hydrogen energy systems. The system is designed with flexibility to provide a testbed to demonstrate systems integration, grid services, energy storage, direct renewable hydrogen production, and innovative end use applications (e.g. HD transportation, natural gas blending, etc.).

DIRECT ENERGY CONVERSION,HYDROGEN↗

DOE OSTI2023

Interconnection and Interoperability Requirements of Hydrogen Assets to Enable Grid Integration

Traditionally, the inverters used for distributed energy resources (DERs) including solar, energy storage and hydrogen fuel cells are grid following assets. Grid following assets track real power and reactive power setpoints decided by either a local autonomous controller or a remote controller like a microgrid controller. In the past five years, multiple challenges have increased the need for grid forming inverters that can interface to a wide variety of energy resources. These grid forming inverters are becoming critical assets for power systems to enable the replacement of existing rotational machines and provide grid services such as grid resiliency services and black-start. Hydrogen assets (fuel cells) have the potential to successfully replace rotating machines and act as voltage and frequency master by leveraging the long-duration and seasonal energy storage capabilities of hydrogen technologies. This poster presents the progress made in budget period 1 of the proposed work. We will leverage an existing ARIES platform experimental setup to run power-hardware-in-the-loop and controller-hardware-in-the-loop experiments with grid forming fuel cell inverters to develop and document the standardization requirements.

electrolyzer↗