Search NASA⌕ Search

SEARCH · Search NASA

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

High Temperature Reactor (HTR) Deep Burn Core and Fuel Analysis: Design Selection for the Prismatic Block Reactor

The Deep Burn (DB) Project is a U.S. Department of Energy sponsored feasibility study of Transuranic Management using high burnup fuel in the high temperature helium cooled reactor (HTR). The DB Project consists of seven tasks: project management, core and fuel analysis, spent fuel management, fuel cycle integration, TRU fuel modeling, TRU fuel qualification, and HTR fuel recycle. In the Phase II of the Project, we conducted nuclear analysis of TRU destruction/utilization in the HTR prismatic block design (Task 2.1), deep burn fuel/TRISO microanalysis (Task 2.3), and synergy with fast reactors (Task 4.2). The Task 2.1 covers the core physics design, thermo-hydraulic CFD analysis, and the thermofluid and safety analysis (low pressure conduction cooling, LPCC) of the HTR prismatic block design. The Task 2.3 covers the analysis of the structural behavior of TRISO fuel containing TRU at very high burnup level, i.e. exceeding 50% of FIMA. The Task 4.2 includes the self-cleaning HTR based on recycle of HTR-generated TRU in the same HTR. Chapter IV contains the design and analysis results of the 600MWth DB-HTR core physics with the cycle length, the average discharged burnup, heavy metal and plutonium consumptions, radial and axial power distributions, temperature reactivity coefficients. Also, it contains the analysis results of the 450MWth DB-HTR core physics and the analysis of the decay heat of a TRU loaded DB-HTR core. The evaluation of the hot spot fuel temperature of the fuel block in the DB-HTR (Deep-Burn High Temperature Reactor) core under full operating power conditions are described in Chapter V. The investigated designs are the 600MWth and 460MWth DB-HTRs. In Chapter VI, the thermo-fluid and safety of the 600MWth DB-HTRs has been analyzed to investigate a thermal-fluid design performance at the steady state and a passive safety performance during an LPCC event. Chapter VII describes the analysis results of the TRISO fuel microanalysis of the 600MWth and 450MWth DB-HTRs. The TRISO fuel microanalysis covers the gas pressure buildup in a coated fuel particle including helium production, the thermo-mechanical behavior of a CFP, the failure probabilities of CFPs, the temperature distribution in a CPF, and the fission product (FP) transport in a CFP and a graphite. In Chapter VIII, it contains the core design and analysis of sodium cooled fast reactor (SFR) with deep burn HTR reactor. It considers a synergistic combination of the DB-MHR and an SFR burner for a safe and efficient transmutation of the TRUs from LWRs. Chapter IX describes the design and analysis results of the self-cleaning (or self-recycling) HTR core. The analysis is considered zero and 5-year cooling time of the spent LWR fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

In situ and in-transit analysis of cosmological simulations

Abstract Modern cosmological simulations have reached the trillion-element scale, rendering data storage and subsequent analysis formidable tasks. To address this circumstance, we present a new MPI-parallel approach for analysis of simulation data while the simulation runs, as an alternative to the traditional workflow consisting of periodically saving large data sets to disk for subsequent ‘offline’ analysis. We demonstrate this approach in the compressible gasdynamics/ N -body code Nyx, a hybrid $\mbox{MPI}+\mbox{OpenMP}$ MPI + OpenMP code based on the BoxLib framework, used for large-scale cosmological simulations. We have enabled on-the-fly workflows in two different ways: one is a straightforward approach consisting of all MPI processes periodically halting the main simulation and analyzing each component of data that they own (‘ in situ ’). The other consists of partitioning processes into disjoint MPI groups, with one performing the simulation and periodically sending data to the other ‘sidecar’ group, which post-processes it while the simulation continues (‘in-transit’). The two groups execute their tasks asynchronously, stopping only to synchronize when a new set of simulation data needs to be analyzed. For both the in situ and in-transit approaches, we experiment with two different analysis suites with distinct performance behavior: one which finds dark matter halos in the simulation using merge trees to calculate the mass contained within iso-density contours, and another which calculates probability distribution functions and power spectra of various fields in the simulation. Both are common analysis tasks for cosmology, and both result in summary statistics significantly smaller than the original data set. We study the behavior of each type of analysis in each workflow in order to determine the optimal configuration for the different data analysis algorithms.

79 ASTRONOMY AND ASTROPHYSICS↗

Supercritical carbon dioxide behavior in porous silica aerogel

Analysis of the tails of the small-angle neutron scattering (SANS) intensities relevant to samples formed by porous silica and carbon dioxide at pressures ranging from 0 to 20 MPa and at temperatures of 308 and 353 K confirms that the CO2 fluid must be treated as a two-phase system. The first of these phases is formed by the fluid closer to the silica wall than a suitable distance [delta] and the second by the fluid external to this shell. The sample scattering-length densities and shell thicknesses are determined by the Porod invariants and the oscillations observed in the Porod plots of the SANS intensities. The resulting matter densities of the shell regions (thickness 15-35 {angstrom}) are approximately equal, while those of the outer regions increase with pressure and become equal to the bulk CO2 at the higher pressures only in the low-temperature case.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Exploring Nonmotorized Travel in New York State Using 2017 National Household Travel Survey Data

This report presents systematic analysis of nonmotorized travel behavior within New York State (NYS) utilizing 2017 National Household Travel Survey data. As walking and biking assume increasingly prominent roles in advancing active transportation objectives, accessible mobility, and sustainable transportation systems, comprehensive understanding of these modal patterns becomes essential for evidence-based policy development and strategic planning initiatives. Recognizing the substantial geographic, demographic, and socioeconomic heterogeneity characterizing NYS—spanning from the concentrated urban fabric of New York City (NYC) to dispersed suburban and rural contexts—this analysis employs the structured "4Ws" analytical framework to examine participant demographics, spatial and temporal distributions, and motivational factors underlying active transportation choices relative to motorized alternatives. This methodological approach captures modal behavior patterns, user characteristics, trip purposes, and temporal variations across the state's diverse contexts. Additionally, the research examines behavioral differences among distinct user classifications, including walk-only and bike-only travelers, while conducting comparative analysis of nonmotorized travel patterns between ALICE (Asset Limited, Income Constrained, Employed) and non-ALICE household categories.

99 GENERAL AND MISCELLANEOUS↗

Using fine-scale fuel measurements to assess wildland fuels, potential fire behavior and hazard mitigation treatments in the southeastern USA.

The inherent spatial and temporal heterogeneity of fuelbeds in forests of the southeastern United States may require fine scale fuel measurements for providing reliable fire hazard and fuel treatment effectiveness estimates. In a series of five papers, an intensive, fine scale fuel inventory from the Savanna River Site in the southeastern United States is used for building fuelbeds and mapping fire behavior potential, evaluating fuel treatment options for effectiveness, and providing a comparative analysis of landscape modeled fire behavior using three different data sources including the Fuel Characteristic Classification System, LANDFIRE, and the Southern Wildfire Risk Assessment. The research demonstrates that fine scale fuel measurements associated with fuel inventories repeated over time can be used to assess broad scale wildland fire potential and hazard mitigation treatment effectiveness in the southeastern USA and similar fire prone regions. Additional investigations will be needed to modify and improve these processes and capture the true potential of these fine scale data sets for fire and fuel management planning.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advanced Pellet Cladding Interaction Modeling Using the US DOE CASL Fuel Performance Code: Peregrine

The US DOE’s Consortium for Advanced Simulation of LWRs (CASL) program has undertaken an effort to enhance and develop modeling and simulation tools for a virtual reactor application, including high fidelity neutronics, fluid flow/thermal hydraulics, and fuel and material behavior. The fuel performance analysis efforts aim to provide 3-dimensional capabilities for single and multiple rods to assess safety margins and the impact of plant operation and fuel rod design on the fuel thermomechanical- chemical behavior, including Pellet-Cladding Interaction (PCI) failures and CRUD-Induced Localized Corrosion (CILC) failures in PWRs. [1-3] The CASL fuel performance code, Peregrine, is an engineering scale code that is built upon the MOOSE/ELK/FOX computational FEM framework, which is also common to the fuel modeling framework, BISON [4,5]. Peregrine uses both 2-D and 3-D geometric fuel rod representations and contains a materials properties and fuel behavior model library for the UO2 and Zircaloy system common to PWR fuel derived from both open literature sources and the FALCON code [6]. The primary purpose of Peregrine is to accurately calculate the thermal, mechanical, and chemical processes active throughout a single fuel rod during operation in a reactor, for both steady state and off-normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The corrosion performance of die-cast magnesium alloy MRI230D in 3.5% NaCl solution saturated with Mg(OH){sub 2}

The environmental behavior of die-cast magnesium alloy MRI230D designated for high-temperature applications was evaluated in comparison with regular AZ91D alloy. The microstructure examination was carried out using SEM, TEM, and X-ray diffraction analysis; the corrosion performance in 3.5% NaCl solution was evaluated by immersion test, salt spray testing, potentiodynamic polarization analysis, and stress corrosion behavior by Slow Strain Rate Testing (SSRT). Although the general corrosion resistance of MRI230D was slightly improved compared to that of AZ91D alloy its stress corrosion resistance was relatively reduced. The variations in the environmental behavior of the two alloys were mainly due to the differences in their chemical composition and microstructure after die casting. In particular, the differences were related to the reduced Al content in MRI230D and the addition of Ca to this alloy, which consequently affected its relative microstructure and electrochemical characteristics. - Research Highlights: {yields}Corrosion and SCC resistance of a new Mg alloy MRI230D was evaluated vs. regular AZ91D. {yields}MRI230D has a minor advantage in corrosion performance compared with AZ91D. {yields}The SCC resistance of MRI230D by SSRT analysis was relatively reduced. {yields}The reduced SCC resistance of MRI230D was due to the detrimental effect of Ca on ductility.

36 MATERIALS SCIENCE↗

Yearly report for the period Jan. 2018 – Feb. 2019 IC Project: w17_faultprediction “Critical Stress in Earth”

The consequence of earthquake is usually catastrophic. Currently, we cannot determine when a fault is approaching failure due to either anthropogenic activities or tectonic movement. In an anthropogenically perturbed setting, the rate of physical changes on faults far exceeds most natural processes with currently unpredictable and unmeasurable results. In a tectonic setting we generally do not know where a fault is in the earthquake cycle beyond noting how long has passed since the last rupture, which is itself sometimes unknown. The Laboratory has therefore funded a multi million multi-year LDRD-DR program that comprises experiments, numerical modeling, and machine learning in order to develop and test a highly novel approach to probe the earthquake cycle and in particular, to detect and locate stressed faults that are approaching failure. For this program, modeling of a series of sheared granular layers undergoing stick-slip behavior using the EES-17’s Combined Finite-Discrete Element Method (FDEM) based code HOSS (Hybrid Optimization Software Suite) plays a pivotal role since numerical simulations of granular fault gouge allow for analysis of the mechanical behavior of the system at a level of spatial and temporal resolution not accessible experimentally, and also offer the possibility of identifying the most important parameters governing earthquake dynamics. The simulated data also provide very detailed stress, strain and motion information for machine learning purpose to predict earthquake. The code – HOSS – has been developed in Geophysics Group in LANL during the past ten years and is used to simulate the stick-slip behavior of granular fault gouge. One of the key feature of HOSS is that it is superior to pure finite element method and discrete element method and can provide very detailed evolvement information of granular fault gouge. Additionally, its parallel computing capability makes large scale earthquake gouge simulation possible. Taking these facts into account, and also because few other fully parallel FDEM code exists, this IC project allows LANL to stay at the forefront of earthquake gouge and granular material simulation in the world.

42 ENGINEERING↗

Advanced Pellet-Cladding Interaction Modeling using the US DOE CASL Fuel Performance Code: Peregrine

The US DOE’s Consortium for Advanced Simulation of LWRs (CASL) program has undertaken an effort to enhance and develop modeling and simulation tools for a virtual reactor application, including high fidelity neutronics, fluid flow/thermal hydraulics, and fuel and material behavior. The fuel performance analysis efforts aim to provide 3-dimensional capabilities for single and multiple rods to assess safety margins and the impact of plant operation and fuel rod design on the fuel thermo-mechanical-chemical behavior, including Pellet-Cladding Interaction (PCI) failures and CRUD-Induced Localized Corrosion (CILC) failures in PWRs. [1-3] The CASL fuel performance code, Peregrine, is an engineering scale code that is built upon the MOOSE/ELK/FOX computational FEM framework, which is also common to the fuel modeling framework, BISON [4,5]. Peregrine uses both 2-D and 3-D geometric fuel rod representations and contains a materials properties and fuel behavior model library for the UO2 and Zircaloy system common to PWR fuel derived from both open literature sources and the FALCON code [6]. The primary purpose of Peregrine is to accurately calculate the thermal, mechanical, and chemical processes active throughout a single fuel rod during operation in a reactor, for both steady state and off-normal conditions.

CASL, Consortium for Advanced Simulation of LWRs, ↗

Azimuthal correlation and collective behavior in nucleus-nucleus collisions

Various flow effects of nuclear and hadronic origin are investigated in nucleus-nucleus collisions. Nuclear emulsion data collected from {sup 84}Kr + Ag/Br interaction at an incident energy of 1.52 GeV per nucleon and from {sup 28}Si + Ag/Br interaction at an incident energy of 14.5 GeV per nucleon are used in the investigation. The transverse momentum distribution and the flow angle analysis show that collective behavior, like a bounce-off effect of the projectile spectators and a sidesplash effect of the target spectators, are present in our event samples. From an azimuthal angle analysis of the data we also see a direct flow of the projectile fragments and of the produced charged particles. On the other hand, for both data samples the target fragments exhibit a reverse flow, while the projectile fragments exhibit an elliptic flow. Relevant flow parameters are measured.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Using Machine Learning to Understand Electric and Hybrid Vehicles Ownership in Burdened and Nonburdened Communities

Transitioning to electric and hybrid vehicles (EHVs) for all communities is a pivotal step toward sustainable transportation and environmental conservation. This paper aims to understand the adoption of EHVs, focusing on burdened communities (BCs) in the United States. The EHV ownership-based analysis combines two datasets—behavioral data from the Puget Sound Regional Travel Survey integrated with BCs (Justice40) data covering transportation insecurity, environmental burden, social vulnerability, health vulnerability, and climate and disaster risk burden. After creating this unique database, descriptive analysis and modeling are used to analyze the data and predict EHV ownership in the future. Specifically, we use a new method that combines particle swarm optimization (PSO) with a stacking model named PSO-Stacking, which incorporates heterogeneous base learners of machine learning and deep learning. PSO applies a customized objective function to select the optimal hyperparameters for heterogeneous learners within the stacking model, effectively addressing challenges such as multicollinearity, data imbalance, nonlinearity, and overfitting. The proposed solution covers more accurate results than standard benchmark models for EHV ownership in BCs and non-BCs. In addition, the results of the PSO-Stacking method are explained using the local interpretable model-agnostic explanations technique. Results show a negative correlation between the BCs indicators, that is, higher transportation insecurity associated with lower EHV ownership. Furthermore, BCs have higher future climate risk scores, diesel particulate matter levels, and PM2.5 in the air than non-BCs because of higher conventional vehicle ownership. These communities are at higher risk and can benefit from electrification, EV infrastructure, and EV policies to address environmental challenges.

Aslam, Zeeshan [ORNL]↗

Exploring Transport Behavior in Hybrid Perovskites Solar Cells via Machine Learning Analysis of Environmental-Dependent Impedance Spectroscopy

Hybrid organic–inorganic perovskites are one of the promising candidates for the next-generation semiconductors due to their superlative optoelectronic properties. However, one of the limiting factors for potential applications is their chemical and structural instability in different environments. Herein, the stability of (FAPbI3)0.85(MAPbBr3)0.15 perovskite solar cell is explored in different atmospheres using impedance spectroscopy. An equivalent circuit model and distribution of relaxation times (DRTs) are used to effectively analyze impedance spectra. DRT is further analyzed via machine learning workflow based on the non-negative matrix factorization of reconstructed relaxation time spectra. This exploration provides the interplay of charge transport dynamics and recombination processes under environment stimuli and illumination. The results reveal that in the dark, oxygen atmosphere induces an increased hole concentration with less ionic character while ionic motion is dominant under ambient air. Under 1 Sun illumination, the environment-dependent impedance responses show a more striking effect compared with dark conditions. In this case, the increased transport resistance observed under oxygen atmosphere in equivalent circuit analysis arises due to interruption of photogenerated hole carriers. The results not only shed light on elucidating transport mechanisms of perovskite solar cells in different environments but also offer an effective interpretation of impedance responses.

36 MATERIALS SCIENCE↗

The 3D printing and modeling of functionally graded Kelvin foams for controlling crushing performance

Mechanical impact protection is an important consideration in many applications, ranging from product transportation to sports. Cellular materials are typically used due to their desirable energy absorption properties and light weight. However, their large deformation and rate dependent responses (especially of polymer foams) are challenging to consider in design. Additionally, the use of foams with uniform properties, such as uniform density and uniform stiffness, often restricts the designed foams to only be suitable for a narrow range of mechanical impact conditions whereas real applications commonly face unpredictable situations. 3D printing offers fabrication flexibility and thus opens the door to create foams with tailored properties. In this work, we investigate the feasibility of using 3D printing for functionally graded foams (FGFs) that are optimal over a broad range of mechanical environments. The foams are fabricated by the recently developed grayscale digital light processing (g-DLP) method which can print parts with locally designed properties. These foams are tested under drop test conditions and with slower displacement control. We also model the large deformation behavior of FGFs using finite element analysis in which we account for the different viscoelastic behaviors of the distinct grayscale regions. We then use the model to examine the impact mitigation capabilities of FGFs in different loading scenarios. Finally, we show how FGFs can be used to satisfy real-world design goals using the case study of a motorcycle helmet. In contrast to prior work, we investigate continuous, functionally graded foams of a single density that differ in their viscoelastic responses. This work provides further insight into the benefits of viscoelastic properties and modulus graded foams and presents a manufacturing approach that can be used to produce the next generation of flexible lattice foams as mechanical absorbers.

3D printing↗

Elucidating the Variable-Temperature Mechanical Properties of a Negative Thermal Expansion Metal–Organic Framework

Here, we report the first experimental study into the thermomechanical and viscoelastic properties of a metal–organic framework (MOF) material. Nanoindentations show a decrease in the Young’s modulus, consistent with classical molecular dynamics simulations, and hardness of HKUST-1 with increasing temperature over the 25–100 °C range. Variable-temperature dynamic mechanical analysis reveals significant creep behavior, with a reduction of 56% and 88% of the hardness over 10 min at 25 and 100 °C, respectively. This result suggests that, despite the increased density that results from increasing temperature in the negative thermal expansion MOF, the thermally induced softening due to vibrational and entropic contributions plays a more dominant role in dictating the material’s temperature-dependent mechanical behavior.

36 MATERIALS SCIENCE↗

Analysis of Online Social Networks to Understand Information Sharing Behaviors Through Social Cognitive Theory

Analyzing the contents of online social networks is an effective process for monitoring and understanding peoples behaviors. Since the nature of conversation and information propagation is similar to traditional conversation and learning, one of the popular socio-cognitive methods, social cognitive theory was applied to online social networks to. Two major news topics about colon cancer were chosen to monitor traffic of Twitter messages. The activity of leaders on the issue (i.e., news companies or people will prior Twitter activity on topics related to colon cancer) was monitored. In addition, the activity of followers , people who never discussed the topics before, but replied to the discussions was also monitored. Topics that produce tangible benefits such as positive outcomes from appropriate preventive actions received dramatically more attention and online social media traffic. Such characteristics can be explained with social cognitive theory and thus present opportunities for effective health campaigns.

Yoon, Hong-Jun↗

Initial Argonne Sodium Draining Tests: Analysis of Test Results and Comparison with Water Draining Behavior

Three initial sodium draining experiments have been carried out in which sodium was drained from a 0.46 m high 4.6 mm inner diameter vertical stainless steel tube wetted by the sodium representative of a sodium channel in a compact diffusion-bonded sodium-to-CO 2 heat exchanger. Prior to the startup of sodium testing, shakedown tests were conducted with water. In all three sodium experiments, the sodium drained efficiently from the channel. Sodium and water both drain efficiently from a 4.6 mm inner diameter vertical stainless steel tube. This is an important and good result for the design of compact diffusion-bonded heat exchanger sodium channels. Sodium drains more efficiently than water. This is also an important and good result for the design of compact diffusion-bonded heat exchanger sodium channels. The draining phenomena observed with sodium and water are significantly different. The draining of water involves an initial rapid slug draining phase followed by a linear rate draining phase followed by a slow draining phase involving draining of rivulets and drops. This behavior has previously been reported in the literature for viscous fluids. The draining of sodium involves an initial rapid slug draining phase but no discernable linear rate draining phase. There is a subsequent slow draining phase. However, unlike the slow draining phase with water that involves a number of rivulets and drops, the slow draining phase with sodium in two out of three sodium tests mainly involves a single discrete event in which a mass of sodium drains from the tube. This single discrete draining event encompasses most of the sodium mass remaining inside of the tube following the rapid slug draining phase. The existence of a single discrete draining event during the slow draining phase with sodium versus several rivulet and drop draining events with water is thought to simply reflect the fact that significantly lower mass fractions of liquid are left behind inside of the tube following the rapid slug draining phase with sodium relative to water. For the sodium tests, the progress of wetting of the stainless steel by sodium was monitored by means of the voltage drop across the tube outer diameter measured by pairs of opposing electrodes welded to the tube outer surface at three different elevations. The electrode data remarkably reveals phenomena during the sodium draining. The downward passage of the sodium slug trailing edge past each electrode was observed from which a mean slug trailing edge velocity could be determined. The subsequent slower increase in voltage drop suggests draining and thinning of a sodium film left behind upon the tube inner surface; wiggles in the voltage drop data are suggestive of the descent of waves on the film. It is thought that the draining sodium film collects as a mass likely near the lower end of the tube and detaches corresponding to the single discrete draining event observed in the load cell data. The minimum circular channel inner diameter for the draining of water and sodium without the formation of lenses that bridge the channel and may remain inside of the tube without draining is predicted with a correlation to be 2.2 mm. The highest priority for future sodium draining testing is to investigate other channel geometries such as a rectilinear channel or a semicircular channel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Automated Vulnerability Detection for Compiled Smart Grid Software

While testing performed with proper experimental controls can provide scientifically quantifiable evidence that software does not contain unintentional vulnerabilities (bugs), it is insufficient to show that intentional vulnerabilities exist, and impractical to certify devices for the expected long lifetimes of use. For both of these needs, rigorous analysis of the software itself is essential. Automated software behavior computation applies rigorous static software analysis methods based on function extraction (FX) to compiled software to detect vulnerabilities, intentional or unintentional, and to verify critical functionality. This analysis is based on the compiled firmware, takes into account machine precision, and does not rely on heuristics or approximations early in the analysis.

99 GENERAL AND MISCELLANEOUS↗