Optical components and technology in laser space communications systems
Optical components and technology for acquisition, tracking, transmit-beam offset and background noise discrimination functions in optical space communications
Chi, C.↗
SEARCH · Search NASA
Results for “CHI”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Characterization of frequency stability
Frequency stability definition for signal generator, proposing spectral density measure
Barnes, J. A.↗
Basic investigation of turbine erosion phenomena
An analytical-empirical model is presented of turbine erosion that fits and explains experience in both steam and metal vapor turbines. Because of the complexities involved in analyzing turbine problems, in a pure scientific sense, it is obvious that this goal can be only partially realized. Therefore, emphasis is placed on providing a useful model for preliminary erosion estimates for given configurations, fluids, and flow conditions.
Pouchot, W. D.↗
Omega time transmissions and receiving requirements
A short history is given of the development of dual VLF time transmission techniques. The theory of time recovery from the relative phase of the dual frequency transmission is presented. The transmission and receiving requirements for cycle identification and cycle ambiguity resolution are described. Finally, an experiment to test the capability of time transmission of the OMEGA system is proposed
Chi, A. R.↗
Mathematical modeling of high and low temperature heat pipes
Mathematical models are developed for calculating heat-transfer limitations of high-temperature heat pipes and heat-transfer limitations and temperature gradient of low temperature heat pipes. Calculated results are compared with the available experimental data from various sources to increase confidence in the present math models. Complete listings of two computer programs for high- and low-temperature heat pipes respectively are appended. These programs enable the performance of heat pipes with wrapped-screen, rectangular-groove or screen-covered rectangular-groove wick to be predicted.
Chi, S. W.↗
Mathematical modeling of high and low temperature heat pipes
Following a review of heat and mass transfer theory relevant to heat pipe performance, math models are developed for calculating heat-transfer limitations of high-temperature heat pipes and heat-transfer limitations and temperature gradient of low temperature heat pipes. Calculated results are compared with the available experimental data from various sources to increase confidence in the present math models. Complete listings of two computer programs for high- and low-temperature heat pipes respectively are included. These programs enable the performance to be predicted of heat pipes with wrapped-screen, rectangular-groove, or screen-covered rectangular-groove wick.
Chi, S. W.↗
Structural dynamic and thermal stress analysis of nuclear reactor vessel support system
A nuclear reactor vessel is supported by a Z-ring and a box ring girder. The two proposed structural configurations to transmit the loads from the Z-ring and the box ring girder to the foundation are shown. The cantilever concrete ledge transmitting the load from the Z-ring and the box girder via the cavity wall to the foundation is shown, along with the loads being transmitted through one of the six steel columns. Both of these two supporting systems were analyzed by using rigid format 9 of NASTRAN for dynamic loads, and the thermal stresses were analyzed by AXISOL. The six column configuration was modeled by a combination of plate and bar elements, and the concrete cantilever ledge configuration was modeled by plate elements. Both configurations were found structurally satisfactory; however, nonstructural considerations favored the concrete cantilever ledge.
Chi-Diango, J.↗
Modes of vibration in a circular plate with three simple support points.
The analytical solutions for the vibrational modes of a thin circular flat plate that is simply supported at three points on the circumference are presented. The mode shapes and corresponding eigenvalues are obtained. Results show that the modes can be grouped into four different types depending on the manner by which they receive the pressure at the supported points. The problem is of the mixed boundary value type in that some portion of the boundary is free while the other portion is simply supported.
Chi, C.↗
A step in time: Changes in standard-frequency and time-signal broadcasts, 1 January 1972
An improved coordinated universal time (UTC) system has been adopted by the International Radio Consultative Committee. It was implemented internationally by the standard-frequency and time-broadcast stations on 1 Jan. 1972. The new UTC system eliminates the frequency offset of 300 parts in 10 to the 10th power between the old UTC and atomic time, thus making the broadcast time interval (the UTC second) constant and defined by the resonant frequency of cesium atoms. The new time scale is kept in synchronism with the rotation of the Earth within plus or minus 0.7 s by step-time adjustments of exactly 1 s, when needed. A time code has been added to the disseminated time signals to permit universal time to be obtained from the broadcasts to the nearest 0.1 s for users requiring such precision. The texts of the International Radio Consultative Committee recommendation and report to implement the new UTC system are given. The coding formats used by various standard time broadcast services to transmit the difference between the universal time (UT1) and the UTC are also given. For users' convenience, worldwide primary VLF and HF transmissions stations, frequencies, and schedules of time emissions are also included. Actual time-step adjustments made by various stations on 1 Jan. 1972, are provided for future reference.
Chi, A. R.↗
Turbulent boundary layer in an adverse pressure gradient without effect of wall curvature
The hypersonic compressible turbulent boundary layer in an adverse pressure gradient along a cylindrical axisymmetric body was studied. The tests were conducted in a Mach 6 contoured axisymmetric nozzle. An external compression cowl was used to produce the gradual adverse pressure gradient and a maximum pressure rise of 7 times the freestream static pressure was achieved in a test region of 23 cm. Boundary layer profiles of static pressure, total pressure, and total temperature, as well as wall transient heat transfer rates were measured. Comparisons of the velocity total temperature profiles to linear and quadratic relations were made. Measured heat transfer data were in good agreement with the prediction from the flat-plate reference enthalpy method. Integral parameters were also in good agreement with results of numerical solutions for compressible turbulent boundary layer equations.
Zakkay, V.↗
Active optics simulation system
The active optics simulation system (AOSS) is a set of computer programs and associated software to be used in the development, design, and evaluation of a primary mirror control system for a large space telescope, (e.g., the tentatively proposed 3-meter telescope). The mathematical models of component subsystems and the solution of the physical processes that occur within the mirror surface control system were obtained, and based on these models AOSS simulates the behavior of the entire mirror surface control system as well as the behavior of the component subsystems. The program has a modular structure so that any subsystem module can be replaced or modified with minimum disruption of the rest of the simulation program.
Chi, C. H.↗
High pulse rate high resolution optical radar system
The system is composed of an optical cavity with a laser and a mode locking means to build up an optical pulse. An optical switch is also provided within the cavity to convert the polarization of the optical pulse generated within the cavity. The optical switch comprises an electro-optical crystal driven by a time delayed driver circuit which is triggered by a coincident signal made from an optical pulse signal and a gating pulse signal. The converted optical pulse strikes a polarization sensitive prism and is deflected out of the cavity toward the pending target in the form of a pulse containing most of the optical energy generated by the laser in the pulse build-up period. After striking the target, the reflected energy is picked up by a transceiver with the total travel time of the pulse being recorded.
Goss, W. C.↗
OMEGA time transmissions and receiver design.
This document gives a short history of the development of dual VLF time-transmission technique. The theory of time recovery from the relative phase of the dual-frequency transmission is presented. The transmission and receiving requirements for cycle identification and cycle ambiguity resolution are described. Finally, a prototype OMEGA timing receiving design is described.
Chi, A. R.↗
Curvilinear bicubic spline fit interpolation scheme
Modification of the rectangular bicubic spline fit interpolation scheme so as to make it suitable for use with a polar grid pattern. In the proposed modified scheme the interpolation function is expressed in terms of the radial length and the arc length, and the shape of the patch, which is a wedge or a truncated wedge, is taken into account implicitly. Examples are presented in which the proposed interpolation scheme was used to reproduce the equations of a hemisphere.
Chi, C.↗
Thermal design and analyses of Skylab multipurpose furnace and experiments
The Skylab multipurpose electric furnace was designed to accommodate eleven different materials processing experiments with their respective thermal requirements and constraints. Extensive prototype and ground-based tests were carried out and detailed thermal analyses were performed to ensure that these requirements and constraints are met. The basic features of the multipurpose electric furnace and the eleven experimental cartridges are outlined. The design and development problems encountered and the solutions to these problems are discussed. The analytical techniques used for thermal design and analyses are described.
Chi, J. W. H.↗
On time scales and time synchronization using LORAN-C as a time reference signal
The long term performance of the eight LORAN-C chains is presented in terms of the Coordinated Universal Time (UTC) of the U.S. Naval Observatory (USNO); and the use of the LORAN-C navigation system for maintaining the user's clock to a UTC scale is described. The atomic time scale and the UTC of several national laboratories and observatories relative to the international atomic time are reported. Typical performance of several NASA tracking station clocks, relative to the USNO master clock, is also presented.
Chi, A. R.↗
OMEGA timing receiver, design and system test
The design of a two frequency OMEGA Timing Receiver is discussed. The receiver tracks the arrival time of the signals by precise phase matching at the receiving antenna. Provision is made for inserting a propagation delay correction for each signal path. Time is measured as the difference between the zero crossing coincidence of the corrected signals and the local time. This number is displayed on the front panel in microseconds. The receiver can also function as a precise phase tracking receiver for collection of propagation data essential to augmenting the propagation corrections. All phase and time information is made available in a BCD format for flexibility in interfacing with other equipment. Results of preliminary tests using experimental transmissions are given. Preliminary results indicate time may be transferred by this technique to an accuracy of a few microseconds.
Wilson, J. J.↗
Clock synchronization experiments using OMEGA transmissions
The OMEGA transmissions from North Dakota on 13.10 and 12.85 kHz were monitored at several sites using a recently developed OMEGA timing receiver specifically designed for this purpose. The experiments were conducted at Goddard Space Flight Center, Greenbelt, Maryland; U.S. Naval Observatory, Washington, D.C.; and at the NASA tracking station, Rosman, North Carolina. Results show that cycle identification of the two carrier frequencies was made at each test site, thus, coarse time (76 microseconds) from the OMEGA transmitted signals to within the ambiguity period of each OMEGA frequency was extracted. The fine time determination, which was extracted from the phase difference between the received OMEGA signals and locally generated signals, was about + or - 2 microseconds for daytime reception and about + or - 5 microseconds for nighttime reception.
Chi, A. R.↗