SEARCH · Search NASA

Results for “Canopy cover”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Remote sensing of soil moisture with microwave radiometers

Results are presented that were derived from measurements made by microwave radiometers during the March 1972 and February 1973 flights of National Aeronautics and Space Administration (NASA) Convair-9900 aircraft over agricultural test sites in the southwestern part of United States. The purpose of the missions was to study the use of microwave radiometers for the remote sensing of soil moisture. The microwave radiometers covered the 0.8- to 21-cm wavelength range. The results show a good linear correlation between the observed microwave brightness temperature and moisture content of the 0- to 1-cm layer of the soil. The results at the largest wavelength (21 cm) show the greatest sensitivity to soil moisture variations and indicate the possibility of sensing these variations through a vegetative canopy. The effect of soil texture on the emission from the soil was also studied and it was found that this effect can be compensated for by expressing soil moisture as a percent of field capacity for the soil. The results were compared with calculations based on a radiative transfer model for layered dielectrics and the agreement is very good at the longer wavelengths. At the shorter wavelengths, surface roughness effects are larger and the agreement becomes poorer.

Schmugge, T.↗

NASA NTRS1986

Geobotanical information contained in Landsat Thematic Mapper images covering southern Missouri

Landsat Thematic Mapper (TM) data collected in the late summer, fall, and winter of 1982 over forested bedrocks in southeastern Missouri were used in conjunction with forest surveys, field work, aerial photographs, and laboratory analyses to evaluate multispectral and seasonal information from visible and reflected IR data. The forested bedrock included granites, rhyolites, carbonates, and sandstones. High reflectance in band 4 (760-900 nm) in the summer scene corresponds to regions of xeric forest type. The fact that the xeric regions tend to develop flat-topped canopies, as opposed to irregular canopy surfaces of the wetter mesic areas, may partially control the TM response in bands 4, 5 (155-175 nm) and 7 (208-235 nm). The xeric regions correlated with soils having poor water retention capabilities, such as rhyolites and certain carbonate rocks with nonporous residum layers. An opposite relationship between xeric and mesic forest biomass was noted, if the commonly used TM band ratio 4/3 was used as a surrogate biomass measure. The high band 4 response over xeric forests gives anomalously high biomass estimates.

Green, G.↗

NASA NTRS1984

Passive microwave remote sensing of soil moisture from an aircraft platform

A series of experiments were conducted over several years using an aircraft platform to study the relationship between passive microwave data and surface soil moisture. Sensor systems included thermal infrared and multifrequency passive microwave instruments. Aircraft measurements were obtained concurrently with ground observations of soil moisture and land cover. Test sites included areas in both humid and semiarid regions of the United States that were typical of these regions. Data analyses indicated that the basic cause and effect relationships between the sensor measurements and soil moisture can be extrapolated from theory and small scale tests to larger resolution elements observed by the aircraft. Pastures in different climatic regions showed similar responses. Vegetation canopy attenuation was verified. Based on these studies the optimal surface soil moisture sensor using passive techniques was a 21-cm wavelength radiometer.

Jackson, T. J.↗

NASA NTRS1989

Calibrating the simple biosphere model for Amazonian tropical forest using field and remote sensing data. I - Average calibration with field data

Using meteorological and hydrological measurements taken in and above the central-Amazon-basin tropical forest, calibration of the Sellers et al. (1986) simple biosphere (SiB) model are described. The SiB model is a one-dimensional soil-vegetation-atmosphere model designed for use within GCMs models, representing the vegetation cover by analogy with processes operating within a single representative plant. The experimental systems and the procedures used to obtain field data are described, together with the specification of the physiological parameterization required to provide an average description of data. It was found that some of the existing literature on stomatal behavior for tropical species is inconsistent with the observed behavior of the complete canopy in Amazonia, and that the rainfall interception store of the canopy is considerably smaller than originally specified in the SiB model.

Sellers, Piers J.↗

NASA NTRS2017

On the Relationship Between Sub-Daily Instantaneous and Daily Total Gross Primary Production: Implications for Interpreting Satellite-Based SIF Retrievals

Spatially and temporally continuous estimation of plant photosynthetic carbon fixation (or gross primary production, GPP) is crucial to our understanding of the global carbon cycle and the impact of climate change. Besides spatial, seasonal and interannual variations, GPP also exhibits strong diurnal variations. Satellite retrieved solar-induced chlorophyll fluorescence (SIF) provides a spatially continuous, but temporally discrete measurement of plant photosynthesis, and has the potential to be used to estimate GPP at global scale. However, it remains unclear whether the seasonal time series of SIF snapshots taken at a fixed time of the day can be used to infer daily total GPP variation at spatial and seasonal scales. In this study, we first used GPP estimates from 135 eddy covariance flux sites, covering a wide range of geographic locations and biome types, to investigate the relationship between the instantaneous GPP (GPP(sub inst)) and daily GPP (GPP(sub daily)) on the seasonal course for different times of the day. Latitudinal and diurnal patterns were found to correspond to variations in photosynthetically active radiation (PAR) and light use efficiency (LUE), respectively. We then used the Soil-Canopy Observation Photosynthesis and Energy Balance (SCOPE) model and the FluxCom GPP product to investigate the instantaneous and daily SIF-GPP relationships at five flux tower sites along a latitudinal gradient and at a global scale for different biome types. The results showed that daily SIF had a stronger linear correlation with daily GPP than instantaneous SIF at the seasonal scale, with an instantaneous to daily SIF conversion factor following the latitudinal and seasonal pattern driven by PAR. Our study highlights the necessity to take the latitudinal and diurnal factors into consideration for SIF-GPP relationship analyses or for physiological phenology analyses based on SIF.

photosynthesis model↗

NASA NTRS2018

Dynamics of Gaps Created By Burning in Florida Oak-Saw Palmetto (Quercus, Fagaceae-Serenoa repens, Arecaceae) Scrub

Sandy gaps in the shrub matrix of oak (Quercus L.)-saw palmetto (Serenoa repens (W. Bartram) Small) scrub are created by fire but typically close quickly because of rapid regrowth. Such gaps are important habitat features for rare scrub flora and fauna and appear to have been more common in the historical landscape. We followed, from 1993 to 2016, the dynamics of 12 gaps (32.2-98.1 sq m) created by burning slash piles as part of restoration of long-unburned scrub. Gaps closed slowly, primarily by canopy spread of oaks around the gaps. In the absence of subsequent fire, gaps closed within approximately 12 yr. When burned a second or third time, gap area increased to near the initial after-burn size but then declined in area more rapidly than after the initial fire. Vegetation that reestablished in gaps differed from that of the scrub matrix in having less cover of scrub oaks, less cover of S. repens. > 0.5 m, greater cover of native shrubs and forbs. > 0.5 m, and more bare ground. Soil heating from slash-pile burning killed the roots and rhizomes from which scrub oaks, Serenoa, and ericaceous shrubs sprout; this altered and slowed the after-fire recovery.

Serenoa↗

NASA NTRS2022

Determination of Chlorophyll Content in Selected Grass Communities of Krkonoše Mts. Tundra Based on Laboratory Spectroscopy and Aerial Hyperspectral Data

The study focuses on the determination of chlorophyll content in four prevailing grasses in the relict arctic-alpine tundra located in the Krkonoše Mountains National Park, Czech Republic. We compared two methods for determination of leaf chlorophyll content (LCC) – spectrophotometric determination in the laboratory, and the LCC assessed by fluorescence portable chlorophyll meter CCM-300. Relationships were established between the LCCs and vegetation indices calculated from leaf spectra acquired with contact probe coupled with an ASD FieldSpec4 Wide-Res spectroradiometer. Canopy chlorophyll contents (CCC) were computed from the LCCs and green leaf area index (LAI), and modelled based on the field spectra measured by the spectroradiometer and the hyperspectral images acquired by Headwall Nano-Hyperspec® mounted on the DJI Matrice 600 Pro drone. The calculations are performed on datasets acquired in June, July and August 2020 together and separately for species and months. In general, the correlations based on June datasets work the best at both levels: median R 2 for all indices was 0.52 for all species together at leaf level and median R 2 = 0.47 at the canopy level (vegetation indices computed from field spectra). Canopy chlorophyll content map was created based on the results of stepwise multiple linear regression. The R 2 was 0.42 when using four wavelengths from the red and red edge spectral region. We attribute the weak model performance to a combination of several factors: leaf structure may bias LCC from laboratory measurements, effects of LAI variability on CCC, and the sampling design, probably not covering the whole phenology equally for all studied species.

L. Cervena↗

NASA NTRS1991

A hotspot model for leaf canopies

The hotspot effect, which provides important information about canopy structure, is modeled using general principles of environmental physics as driven by parameters of interest in remote sensing, such as leaf size, leaf shape, leaf area index, and leaf angle distribution. Specific examples are derived for canopies of horizontal leaves. The hotspot effect is implemented within the framework of the model developed by Suits (1972) for a canopy of leaves to illustrate what might occur in an agricultural crop. Because the hotspot effect arises from very basic geometrical principles and is scale-free, it occurs similarly in woodlands, forests, crops, rough soil surfaces, and clouds. The scaling principles advanced are also significant factors in the production of image spatial and angular variance and covariance which can be used to assess land cover structure through remote sensing.

Jupp, David L. B.↗

NASA NTRS2019

Optimization of a Remote Sensing Energy Balance Method over Different Canopy Applied at Global Scale

Parameterization methods which calculate turbulent heat and water fluxes with thermal remote sensing data were evaluated in the revised remote sensing surface energy balance system (SEBS) model (Chen et al., 2013). The model calculates sensible heat (H) based on the Monin-Obukhov similarity theory (MOST) and determines latent heat (LE) as the residual of energy balance. We examined the uncertainties of H and LE in the SEBS model due to five key parameters at the local station point scale. Observations at 27 flux towers located in seven land cover types (needle-leaf forest, broad leaf forest, shrub, savanna, grassland, cropland, and sparsely vegetated land) and an artificial intelligence particle swarm optimization (PSO) algorithm was combined to calibrate the five parameters (leaf drag coefficient, leaf heat transfer coefficients, roughness length for soil, and two parameters for ground heat calculation) in the SEBS model. The root-mean-square error at the site scale was reduced by 9 W/sq.m for H, and 92 W/sq.m for LE, and their correlation coefficients were increased by 0.07 (H) and 0.11 (LE) after using the calibrated parameters. The updated model validation was further conducted globally for the remotely sensed evapotranspiration (ET) calculations. Overestimation of SEBS global ET was significantly improved by using the optimized values of the parameters. The results suggested PSO was able to consistently locate the global optimum of the SEBS model, and appears to be capable of solving the ET model optimization problem.

Chen, Xuelong↗

NASA NTRS1988

Canopy reflectance modeling in a tropical wooded grassland

The Li-Strahler canopy reflectance model, driven by LANDSAT Thematic Mapper (TM) data, provided regional estimates of tree size and density in two bioclimatic zones in Africa. This model exploits tree geometry in an inversion technique to predict average tree size and density from reflectance data using a few simple patameters measured in the field and in the imagery. Reflectance properties of the trees were measured in the study sites using a pole-mounted radiometer. The measurements showed that the assumptions of the simple Li-Strahler model are reasonable for these woodlands. The field radiometer measurements were used to calculate the normalized difference vegetation index (NDVI), and the integrated NDVI over the canopy was related to crown volume. Predictions of tree size and density from the canopy model were used with allometric equations from the literature to estimate woody biomass and potential foliar biomass for the sites and for the regions. Estimates were compared with independent measurements made in the Sahelian sites, and to typical values from the literature for these regions and for similar woodlands. In order to apply the inversion procedure regionally, an area must first be stratified into woodland cover classes, and dry-season TM data were used to generate a stratum map of the study areas with reasonable accuracy. The method used was unsupervised classification of multi-data principal components images.

Simonett, David↗

NASA NTRS2011

The ICESat-2 Mission: Concept, Pre-Launch Activities, and Opportunities

Ice sheet and sea level changes have been explicitly identified as a priority in the President's Climate Change Science Program, the Arctic Climate Impact Assessment, the 4th Assessment Report of the IPee and other national and international policy documents. Following recommendations from the National Research Council for an ICESat follow-on mission, the ICESat-2 mission is now under development for launch in early 2016. The primary aims of the ICESat-2 mission are to continue measurements of sea-ice thickness change, and ice sheet elevation changes at scales from outlet glaciers to the entire ice sheet as established by ICES at. In contrast to ICES at, ICESat-2 will employ a 6-beam micro-pulse laser photon-counting approach. The current concept uses a high repetition rate (10 kHz; equivalent to 70 cm on the ground) low-power laser in conjunction with single-photon sensitive detectors to measure range using approximately 532nm (green) light. The concept will enable the generation of seasonal maps of ice sheet elevation of Greenland and Antarctica, monthly maps of sea ice thickness of the polar ocean, a dense map of land elevation (2 km track spacing at the equator after two years) enabling the determination of canopy height, as well as ocean heights. While the mission has been optimized for cryospheric science and vast amount of high precision elevation measurements taken over land and over the ocean as well as of the atmosphere will provide scientists with a wealth of opportunities to explore the utility of ICESat-2. Those will range from the retrieval of cloud properties, to river stages, to snow cover, to land use changes and more. The presentation will review the measurement concept and physical principles of ICESat-2, current and planned activities to assess instrument performance and develop geophysical algorithms, as well as potential opportunities outside the main objectives of ICESat-2.

Markus, Thorsten↗

NASA NTRS2022

Albuquerque Urban Development: Enhancing Urban Cooling Interventions by Modeling Urban Forestry through NASA Earth Observations in Albuquerque, New Mexico

The City of Albuquerque, New Mexico is experiencing increasing urban heat island(UHI) effects, which impact the health, safety, and comfort of the community. In partnership with the City of Albuquerque Department of Environmental Health, Department of Parks and Recreation, and Let’s Plant Albuquerque!, this project used satellite Earth observations from April 2016–August 2022 to model increases in tree canopy within the City of Albuquerque to help combat the urban heat island in the city’s warmer areas over the next decade. Using Landsat 8’s Thermal Infrared Sensor (TIRS) and the Ecosystem Spaceborne Thermal Radiometer Experiment on the International Space Station (ECOSTRESS), along with the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) Urban Cooling and ENVI-Met models, the team modeled tree cover interventions and created land surface temperature maps. These outputs will help the city make data-driven decisions for their tree planting goal in a targeted approach.

Max Stewart↗

NASA NTRS2022

Milwaukee Urban Development: Assessing Climate Vulnerability through the InVEST Model on Urban Cooling in Milwaukee Using NASA Earth Observations

Milwaukee’s neighborhoods experience increased social, health, and ecological stress from the Urban Heat Island (UHI) effect due to changing land cover and climate. Extreme urban heat disproportionately affects Black and Latine communities due to systematic disinvestment in infrastructure and lack of resources to cope with heat. Our partner, Groundwork Milwaukee, supports Environmental Justice organizing around urban heat in historically redlined neighborhoods. This study explores heat mitigation in Metcalfe Park, one such neighborhood that is a focus area for our partner, as well as across the city and county of Milwaukee. Our team utilized the Natural Capital Project’s Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) Model for urban cooling to model heat mitigation scenarios for Milwaukee in support of Groundwork’s climate resilience and heat mitigation work. The data inputs used in our analysis were Land Use Land Cover (LULC), evapotranspiration, and surface temperature derived from NASA Earth observations, as well as a biophysical table containing land cover class attributes. We developed a heat vulnerability index from American Community Survey datasets and satellite imagery to identify areas in most need of heat mitigation intervention. We found that central and northwest city areas, home to a majority of Milwaukee’s Black and Latine population, have low heat mitigation and high vulnerability to heat impacts compared to the rest of the county. We also found that tree canopy increases across scales are effective in promoting heat mitigation. Our results and end products will bolster the efforts of our partners to make decisions on heat mitigation strategies, build community resilience, and reverse legacies of environmental racism in the face of extreme heat and climate change.

urban heat island↗

DOE OSTI2026

Accelerated Carbon and Water Cycles in the Amazon and Congo Basins Revealed From TRENDY Models and Remote Sensing Products

Tropical forests play a vital role in the global carbon cycle and land–atmosphere interactions. Estimating tropical forest carbon–water dynamics is challenging due to observational and modeling uncertainties. This study leverages the “Trends and drivers of the regional scale terrestrial sources and sinks of carbon dioxide” (TRENDY) project models and satellite observations to assess changes (2003–2021) in vegetation carbon, gross primary production (GPP), evapotranspiration (ET), and net biosphere production (NBP) in the Amazon and Congo. Atmospheric CO 2 , climate variability, and land use and land cover changes constrain these variables between 1700 and 2021 with the overall increasing trends of carbon stock and fluxes. The models overestimate vegetation carbon and GPP, while ET and NBP are consistent with observations. Fire-activated models predict lower values for vegetation carbon and GPP, ET, and NBP, aligning more closely with observations. The higher ET from fire-activated models may result from enhanced soil evaporation due to increased canopy openings. Fire-inactivated models could well estimate the magnitudes of NBP. The high vegetation carbon in nitrogen-enabled models points to simulation uncertainties and imbalance in model numbers regarding the nitrogen cycle. Although the nitrogen cycle enhances water use efficiency in both the Amazon and Congo, the models show a higher sensitivity to the nitrogen cycle in the Congo. This study highlights the challenges in accurately representing tropical biogeochemical cycles and the values of satellite products in model evaluations, underscoring the need for standard modeling protocols that address biogeochemical components (e.g., nutrient cycles) to better resolve process-based representations.

Shi, Mingjie [Pacific Northwest National Laborator↗

NASA NTRS1994

Canopy reflectance modelling of semiarid vegetation

Three different types of remote sensing algorithms for estimating vegetation amount and other land surface biophysical parameters were tested for semiarid environments. These included statistical linear models, the Li-Strahler geometric-optical canopy model, and linear spectral mixture analysis. The two study areas were the National Science Foundation's Jornada Long Term Ecological Research site near Las Cruces, NM, in the northern Chihuahuan desert, and the HAPEX-Sahel site near Niamey, Niger, in West Africa, comprising semiarid rangeland and subtropical crop land. The statistical approach (simple and multiple regression) resulted in high correlations between SPOT satellite spectral reflectance and shrub and grass cover, although these correlations varied with the spatial scale of aggregation of the measurements. The Li-Strahler model produced estimated of shrub size and density for both study sites with large standard errors. In the Jornada, the estimates were accurate enough to be useful for characterizing structural differences among three shrub strata. In Niger, the range of shrub cover and size in short-fallow shrublands is so low that the necessity of spatially distributed estimation of shrub size and density is questionable. Spectral mixture analysis of multiscale, multitemporal, multispectral radiometer data and imagery for Niger showed a positive relationship between fractions of spectral endmembers and surface parameters of interest including soil cover, vegetation cover, and leaf area index.

Franklin, Janet↗

NASA NTRS2004

Validation and Analysis of SRTM and VCL Data Over Tropical Volcanoes

The focus of our investigation was on the application of digital topographic data in conducting first-order volcanological and structural studies of tropical volcanoes, focusing on the Java, the Philippines and the Galapagos Islands. Kilauea volcano, Hawaii, served as our test site for SRTM data validation. Volcanoes in humid tropical environments are frequently cloud covered, typically densely vegetated and erode rapidly, so that it was expected that new insights into the styles of eruption of these volcanoes could be obtained from analysis of topographic data. For instance, in certain parts of the world, such as Indonesia, even the regional structural context of volcanic centers is poorly known, and the distribution of volcanic products (e.g., lava flows, pyroclastic flows, and lahars) are not well mapped. SRTM and Vegetation Canopy Lidar (VCL) data were expected to provide new information on these volcanoes. Due to the cancellation of the VCL mission, we did not conduct any lidar studies during the duration of this project. Digital elevation models (DEMs) such as those collected by SRTM provide quantitative information about the time-integrated typical activity on a volcano and allow an assessment of the spatial and temporal contributions of various constructional and destructional processes to each volcano's present morphology. For basaltic volcanoes, P_c?w!m-d and Garbed (2000) have shown that gradual slopes (less than 5 deg.) occur where lava and tephra pond within calderas or in the saddles between adjacent volcanoes, as well as where lava deltas coalesce to form coastal plains. Vent concentration zones (axes of rift zones) have slopes ranging from 10 deg. to 12 deg. Differential vertical growth rates between vent concentration zones and adjacent mostly-lava flanks produce steep constructional slopes up to 40". The steepest slopes (locally approaching 90 deg.) are produced by fluvial erosion, caldera collapse, faulting, and catastrophic avalanches, all of which are usually identifiable. Due to the delay in the release of the SRTM data following the February 2000 flight, a significant part of our effort was devoted to the analog studies of the SRTM topographic data using topographic data from airborne interferometric radars. As part of the original SRTM Science Team, we proposed four study sites (Kilauea, Hawaii; Mt. Pinatubo, Philippines; Cerro Am1 and Femandina volcanoes, Galapagos Islands; and Tengger caldera, Java) where we could conduct detailed geologic studies to evaluate the uses of SRTM data for the analysis of lava flows, lahars, erosion of ash deposits, and an evaluation of the structural setting of the volcanoes. Only near the end of this project was one of these SRTM Science Team products (Luzon Island, the Philippines) released to the community, and we only had limited time to work on these data.

Mouginis-Mark, Peter J.↗

NASA NTRS2002

Getting the Gold Treatment

Epner Technology, Inc., worked with Goddard Space Center to apply gold coating to the Vegetation Canopy Lidar (VCL) mirror. This partnership resulted in new commercial applications for Epner's LaserGold(R) process in the automotive industry. Previously, the company did not have equipment large enough to handle the plating of the stainless steel panels cost effectively. Seeing a chance to renew this effort, Epner Technology and Goddard entered into an agreement by which NASA would fund the facility needed to do the gold-plating, and Epner Technology would cover all other costs as part of their internal research and development. The VCL mirror project proceeded successfully, fulfilling Goddard's needs and leaving Epner Technology with a new facility to provide LaserGold for the automotive industry. The new capability means increased power savings and improvements in both quality and production time for BMW Manufacturing Corporation of Spartanburg, South Carolina, and Cadillac of Detroit, Michigan, as well as other manufacturers who have implemented Epner Technology's LaserGold process. LaserGold(R) is a registered trademark of Epner Technology, Inc.

Source record↗

NASA NTRS2000

A Preview of AMSR: Airborne C-band Microwave Radiometer (ACMR) Observations from SGP99

Although L-band is generally considered ideal for passive microwave sensing of soil moisture, near-future satellite observing systems such as Advanced Mechanically Scanned Radiometer (AMSR) will provide C-band data for several years before any L-band data might become available. The Southern Great Plains'99 (SGP99) Experiment was designed to generate C-band observations suitable for testing and refinement of AMSR-era soil moisture retrieval algorithms. C-band data collected using the Airborne C-band Microwave Radiometer (ACMR), a new high-accuracy NASA/GSFC instrument, clearly demonstrated a strong response to a 9-day drydown event as well as to differences between the northern (cooler & wetter) and southern (warmer & dryer) areas covered by the P-3 flights. For example, the H-polarized brightness temperatures observed during the first three days of the drydown increased up to 50 K in the northern areas. These observations represent a preview of what we can expect from AMSR, albeit at 3-km spatial resolution vs. approximately 60 km for AMSR. Initial results of soil-vegetation microwave modeling will also be presented to estimate the relative contributions of soil physical temperature, canopy physical temperature, soil moisture, and canopy moisture. Significant radio-frequency interference (RFI) was evident during the experiment, and amelioration strategies will be discussed. The net effect of RFI (an upward bias in brightnesses) when averaged over an AMSR footprint is expected to be more subtle.

Kim, Edward↗