Search NASA⌕ Search

SEARCH · Search NASA

Results for “Charging Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Surface charging, discharging and chemical modification at a sliding contact

Electrostatic charging, discharging, and consequent surface modification induced by sliding dissimilar surfaces have been studied. The surface-charge related phenomena were monitored by using a home-built capacitive, non-contact electrical probe, and the surface chemistry was studied by X-ray photoelectron spectroscopy (XPS). The experiments were performed on the disk surface of a ball-on-rotating-disk apparatus; using a glass disk and a Teflon (polytetrafluoroethylene) ball arrangement, and a polyester disks and a diamondlike carbon (DLC) coated steel ball arrangement. The capacitive probe is designed to perform highly resolved measurements, which is sensitive to relative change in charge density on the probed surface. For glass and Teflon arrangement, electrical measurements show that the ball track acquires non-uniform charging. Here not only the increase in charge density, but interestingly, increase in number of highly charged regions on the ball track was resolved. Threefold increase in the number of such highly charged regions per cycle was detected immediately before the gas breakdown-like incidences compared to that of other charge/discharge incidences at a fixed disk rotation speed. We are also able to comment on the behavior and the charge decay time in the ambient air-like condition, once the sliding contact is discontinued. XPS analysis showed a marginal deoxidation effect on the polyester disks due to the charging and discharging of the surfaces. Moreover, these XPS results clearly indicate that the wear and friction (sliding without charging) on the surface can be discarded from inducing such a deoxidation effect.

36 MATERIALS SCIENCE↗

Polarization Behavior of Water in Extreme Aqueous Environments: A molecular dynamics study based on the Gaussian Charge Polarizable Water Model.

We study the polarization behavior of water under geologically-relevantextreme aqueous environments along four equidistant supercriticalisotherms, 773 ! T (K) ! 1373, and over a wide pressure range,0 < P(GPa) ! 30 , by isobaric-isothermal molecular dynamics simulationsof the Gaussian Charge Polarizable (GCP ) water model, to unravel anddiscuss the underlying link between two precisely defined orientationalorder parameters and the magnitude of the average induced dipole momentof water. The predicted behavior indicates an isothermal linear dependence(a) between the magnitude of the average induced dipole moment μind andthe average system density ! , (b) between the magnitude of the averageinduced dipole μind and that of the total dipole μtot , resulting from (c) acompensating (inverse) dependence between the permanent-to-induceddipolar angle ! and the magnitude of the average induced dipole momentμind . Moreover, we interpret this behavior in terms of the evolution of thestate dependent tetrahedral order parameter qT and the correspondingbond-order parameter Q6 , supplemented by the microstructural analysisbased on the three site-site radial distribution functions of water and thedistance-ranked nearest-neighbors distributions. Finally, we show thatwhile water exhibits a dramatic microstructural transformation from anopen four-coordinated hydrogen-bonded network at normal conditions to a quasi close-packed coordination, it still preserves a significant degree of hydrogen bonding.

08 HYDROGEN↗

Simulations of one- and two-dimensional complex plasmas using a modular, object-oriented code

In a complex plasma, charged microparticles ('dust') are added to a background of ions, electrons, and neutral particles. This dust fully interacts with the surrounding plasma and self-consistently alters the plasma environment leading to the emergence of new plasma behavior. Numerical tools that complement experimental investigations can provide important insights into the properties of complex plasmas. This paper discusses a newly developed code, named DEMON (dynamic exploration of microparticle clouds optimized numerically), for simulating a complex plasma. The DEMON code models the behavior of the charged particle component of a complex plasma in a uniform plasma background. The key feature of the DEMON code is the use of a modular force model that allows a wide variety of experimental configurations to be studied without varying the core code infrastructure. Examples of the flexibility of this modular approach are presented using examples of one- and two-dimensional complex plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of Transverse Physics on Nonlinear Evolution of Longitudinal Space-Charge Waves in Beams

Longitudinal space-charge waves can introduce energy perturbations into charge particle beams and degrade the beam quality, which is critical to many modern applications of particle accelerators. Although many longitudinal phenomena arising from small perturbations can be explained by a one-dimensional cold fluid theory, nonlinear behavior of space-charge waves observed in experiments has not been well understood. In this paper, we summarize our recent investigation by means of more detailed measurements and self-consistent simulations. Combining the numerical capability of a PIC code, WARP, with the detailed initial conditions measured by our newly developed time resolved 6-D phase space mapping technique, we are able to construct a self consistent model for studying the complex physics of longitudinal dynamics of space-charge dominated beams. Results from simulation studies suggest that the unexplained nonlinear behavior of space-charge waves may be due to transverse mismatch or misalignment of beams.

43 PARTICLE ACCELERATORS↗

Understanding sensitization behavior of lead selenide photoconductive detectors by charge separation model

We introduce a charge separation model in this work to explain the mechanism of enhanced photoconductivity of polycrystalline lead salt photoconductors. Our results show that this model could clarify the heuristic fabrication processes of such lead salt detectors that were not well understood and often considered mysterious for nearly a century. The improved lifetime and performance of the device, e.g., responsivity, are attributed to the spatial separation of holes and electrons, hence less possibility of carrier recombination. This model shows that in addition to crystal quality the size of crystallites, the depth of outer conversion layer, and doping concentration could all affect detector performance. The simulation results agree well with experimental results and thus offer a very useful tool for further improvement of lead salt detectors. The model was developed with lead salt family of photoconductors in mind, but may well be applicable to a wider class of semiconducting films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial charge and strain effects on the ferroelectric behavior of epitaxial (001) PbTiO 3 films on (110) DyScO 3 substrates

In-situ synchrotron x-ray observations reveal that the ferroelectric behavior of epitaxial (001) PbTiO3 thin films grown on (110) DyScO3 substrates depends on both film thickness and interfacial electrical properties. A 92-nm-thick film was found to exhibit an a/c domain structure with a ferroelectric Curie temperature similar to that theoretically predicted based on the strain state. In contrast, 6-nm-thick films contained only c-oriented domains, and the ferroelectric behavior was found to depend strongly on the nature of the electrical boundary condition at the buried interface.

Highland, M. J.↗

Understanding the role of buried interface charges in a metal-oxide-semiconductor stack of Ti/Al{sub 2}O{sub 3}/Si using hard x-ray photoelectron spectroscopy

Hard X-ray photoelectron spectroscopy (HAXPES) analyses were carried out on metal-oxide-semiconductor (MOS) samples consisting of Si, thick and thin Al{sub 2}O{sub 3}, and a Ti metal cap. Using Si 1s and C 1s core levels for an energy reference, the Al 1s and Si 1s spectra were analyzed to reveal information about the location and roles of charges throughout the MOS layers. With different oxide thicknesses (2 nm and 23 nm), the depth sensitivity of HAXPES is exploited to probe different regions in the MOS structure. Post Ti deposition results indicated unexpected band alignment values between the thin and thick films, which are explained by the behavior of mobile charge within the Al{sub 2}O{sub 3} layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Parametrization of the shape of hadron-production spectra in high-energy particle interactions

The transverse-momentum dependence of inclusive differential cross sections measured in various collider experiments for processes involving the production of long-lived charged hadrons was approximated by the sum of an exponential and a power-law function. The dependence of the parameters appearing in these functions on the colliding-particle energy and type was studied, and relationships between these parameters were established. A number of new regularities in the behavior of charged-particle spectra were discovered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Why MnIn{sub 2}O{sub 4} spinel is not a transparent conducting oxide?

The title compound has been synthesized by a citrate technique. The crystal structure has been investigated at room temperature from high-resolution neutron powder diffraction (NPD) data. It crystallizes in a cubic spinel structure, space group Fd3-bar m, Z=8, with a=9.0008(1) A at 295 K. It exhibits a crystallographic formula (Mn{sub 0.924(2)}In{sub 0.076(2)}){sub 8a}(In{sub 1.804(2)}Mn{sub 0.196(2)}){sub 16d}O{sub 4}, where 8a and 16d stand for the tetrahedral and octahedral sites of the spinel structure, respectively, with a slight degree of inversion, {lambda}=0.08. MnIn{sub 2}O{sub 4} shows antiferromagnetic interactions below T{sub N} Almost-Equal-To 40 K, due to the statistical distribution of Mn ions over the two available sites. Unlike the related MgIn{sub 2}O{sub 4} and CdIn{sub 2}O{sub 4} spinels, well known as transparent conducting oxides, MnIn{sub 2}O{sub 4} is not transparent and shows a poor conductivity ({sigma}=0.38 S cm{sup -1} at 1123 K): the presence of Mn ions, able to adopt mixed valence states, localizes the charges that, otherwise, would be delocalized in the spinel conduction band. - Graphical Abstract: From NPD data the crystallographic formula (Mn{sub 0.924(2)}In{sub 0.076(2)}){sub 8a}(In{sub 1.804(2)}Mn{sub 0.196(2)}){sub 16d}O{sub 4}, shows a slight degree of inversion, {lambda}=0.08 and a certain In deficiency. The presence of Mn ions, able to adopt mixed oxidation states, localize the charges that, otherwise, would be delocalized in the spinel conduction band; the presence of localized Mn{sup 2+} and Mn{sup 3+} ions provides the characteristic brown color. Highlights: Black-Right-Pointing-Pointer Accurate structural determination from NPD data: inversion degree (8%), and In deficiency. Black-Right-Pointing-Pointer Bond-valence indicates Mn{sup 2+}-Mn{sup 3+} ions; edge-sharing octahedra contain 90% In{sup 3+}+10% Mn{sup 3+} cations. Black-Right-Pointing-Pointer Conductivity several orders of magnitude lower than those of MgIn{sub 2}O{sub 4} or CdIn{sub 2}O{sub 4}. Black-Right-Pointing-Pointer Variability of Mn oxidation states cancels any electron-doping effect, emptying conduction band of mobile charge carriers. Black-Right-Pointing-Pointer Curie-Weiss behavior confirming the determined charge distribution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental characterization of a triply periodic minimal surface PCM-to-air thermal energy storage device

Here, the expansion of energy production has intensified research into thermal energy storage (TES) to manage variability and improve system efficiency. Heat exchanger design is critical to achieving high power densities in TES systems. This study presents a high-surface-area phase change material (PCM)-to-air heat exchanger fabricated via resin-based stereolithography with a novel gyroid-based geometry tailored for enhanced performance. Material properties of the commercial PCM and resin were characterized using analytical techniques. A controlled air loop was used to evaluate heat transfer and pressure drop at various flow rates and inlet temperatures. Results show a strong dependence on the inlet temperature difference (ΔT) relative to the PCM melting point. During charging at the highest flow rate, increasing the inlet air temperature from ΔT = 5 °C to 20 °C above the melting point increased the average heat transfer rate by 187%. During discharging, decreasing the inlet temperature by the same ΔT below the melting point led to a 232% increase. Notably, the high-surface-area design enabled nearly symmetric charging and discharging behavior, a novel result for PCM-based TES systems which are often restricted by natural convection and other effects. The overall heat transfer coefficient was calculated and compared to values from standard design correlations. The maximum thermal effectiveness reached 95% at ΔT = 20 °C and a moderate flow rate of 34 m 3 /h. Peak coefficients of performance (COP) of 7 during charging and 6.4 during discharging were observed at ΔT = 20 °C and a low flow rate of 20 m 3 /h. These results demonstrate the viability of additively manufactured geometries for advanced TES applications.

25 ENERGY STORAGE↗

Dissociation of doubly charged clusters of lithium acetate: Asymmetric fission and breakdown of the liquid drop model: Dissociation of doubly charged clusters of lithium acetate

Unimolecular and collision-induced dissociation of doubly charged lithium acetate clusters, (CH3COOLi)nLi22+, demonstrated that Coulomb fission via charge separation is the dominant dissociation process with no contribution from the neutral evaporation processes for all such ions from the critical limit to larger cluster ions, although latter process have normally been observed in all earlier studies. These results are clearly in disagreement with the Rayleigh’s liquid drop model that has been used successfully to predict the critical size and explain the fragmentation behavior of multiply charged clusters.

Cluster Ions↗

Delineating the kinetic limitations of Mn 2+/3+ redox in LiMn x Fe 1−x PO 4 cathodes for lithium-ion batteries

LiMn x Fe 1−x PO 4 (LMFP) cathodes offer higher energy density than LiFePO 4 due to a higher operating voltage. However, the kinetic limitations of the Mn 2+/3+ redox couple in LMFP restrict its practically achievable capacity and hinder the ability to achieve high energy density. While the shortcomings of Mn 2+/3+ redox are recognized, its behavior and the factors that impact it remain to be fully understood. We present here an in-depth kinetics study of LMFP by utilizing novel techniques, such as chronoamperometry and galvanostatic electrochemical impedance spectroscopy. Compared to moderate-Mn LMFP (40–60% Mn), high-Mn LMFP (80% Mn) experiences reduced capacity, poor rate capability, and heightened impedance during Mn 2+/3+ redox. The oxidation of Mn 2+ to Mn 3+ becomes more resistive during charge due to the formation of Jahn–Teller active Mn 3+ and the increasing charge-transfer insulating behavior of Mn x Fe 1−x PO 4 . However, the impedance associated with Mn 3+ to Mn 2+ reduction remains constant during discharge in the entire region. The protracted Mn2+ oxidation in high-Mn LMFP results in excessive impedance compared to that in moderate-Mn LMFP, even at low C-rates and high cycling temperatures. Despite the promise of high energy density, the extreme kinetic limitations inherent to high-Mn LMFP present a barrier.

25 ENERGY STORAGE↗

Colloidal Stability of PFSA-Ionomer Dispersions. Part I. Single-Ion Electrostatic Interaction Potential Energies

Charged colloidal particles neutralized by a single counterion are increasingly important for many emerging technologies. Attention here is paid specifically to hydrogen fuel cells and water electrolyzers whose catalyst layers are manufactured from a perfluorinated sulfonic acid polymer (PFSA) suspended in aqueous/alcohol solutions. Partially dissolved PFSA aggregates, known collectively as ionomers, are stabilized by the electrostatic repulsion of overlapping diffuse double layers consisting of only protons dissociated from the suspended polymer. We denote such double layers containing no added electrolyte as "single ion". Size-distribution predictions build upon interparticle interaction potential energies from the Derjaguin-Landau-Verwey-Overbeek (DLVO) formalism. However, when only a single counterion is present in solution, classical DLVO electrostatic potential energies no longer apply. Accordingly, here a new formulation is proposed to describe how single-counterion diffuse double layers interact in colloidal suspensions. Part II (Srivastav, H.; Weber, A. Z.; Radke, C. J. Langmuir 2024 DOI: 10.1021/acs.langmuir.3c03904) of this contribution uses the new single-ion interaction energies to predict aggregated size distributions and the resulting solution pH of PFSA in mixtures of n-propanol and water. A single-counterion diffuse layer cannot reach an electrically neutral concentration far from a charged particle. Consequently, nowhere in the dispersion is the solvent neutral, and the diffuse layer emanating from one particle always experiences the presence of other particles (or walls). Thus, in addition to an intervening interparticle repulsive force, a backside osmotic force is always present. With this new construction, we establish that single-ion repulsive pair interaction energies are much larger than those of classical DLVO electrostatic potentials. The proposed single-ion electrostatic pair potential governs dramatic new dispersion behavior, including dispersions that are stable at a low volume fraction but unstable at a high volume fraction and finite volume-fraction dispersions that are unstable with fine particles but stable with coarse particles. Finally, the proposed single-counterion electrostatic pair potential provides a general expression for predicting colloidal behavior for any charged particle dispersion in ionizing solvents with no added electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing charge transfer in a novel class of luminescent perovskite-based heterostructures composed of quantum dots bound to RE-activated CaTiO 3 phosphors

We report on the synthesis and structural characterization of novel semiconducting heterostructures composed of cadmium selenide (CdSe) quantum dots (QDs) attached onto the surfaces of novel high-surface area, porous rare-earth-ion doped alkaline earth titanate micron-scale spherical motifs, i.e. both Eu-doped and Pr-doped CaTiO 3 , composed of constituent, component nanoparticles. These unique metal oxide perovskite building blocks were created by a multi-pronged synthetic strategy involving molten salt and hydrothermal protocols. Subsequently, optical characterization of these heterostructures indicated a clear behavioral dependence of charge transfer in these systems upon a number of parameters such as the nature of the dopant, the reaction temperature, and particle size. Specifically, 2.7 nm diameter ligand-functionalized CdSe QDs were anchored onto sub-micron sized CaTiO 3 -based spherical assemblies, prepared by molten salt protocols. We found that both the Pr- and Eu-doped CaTiO 3 displayed pronounced PL emissions, with maximum intensities observed using optimized lanthanide concentrations of 0.2 mol% and 6 mol%, respectively. Analogous experiments were performed on Eu-doped BaTiO 3 and SrTiO 3 motifs, but CaTiO 3 still performed as the most effective host material amongst the three perovskite systems tested. Furthermore, the ligand-capped CdSe QD-doped CaTiO 3 heterostructures exhibited effective charge transfer between the two individual constituent nanoscale components, an assertion corroborated by the corresponding quenching of their measured PL signals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗