Search NASA⌕ Search

SEARCH · Search NASA

Results for “Chemical tools”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Deployment of the HFIRCON transport and depletion tool for plutonium-238 production studies

Irradiation of {sup 237}Np-bearing targets in Oak Ridge National Laboratory's (ORNL) High Flux Isotope Reactor (HFIR) results in the efficient production of {sup 238}Pu, which, in the form of heat source PuO{sub 2}, is used as a reliable power source for deep-space and planetary NASA missions. A technology demonstration subproject was initiated at ORNL in 2011 to develop and implement the technology required to establish a {sup 238}Pu supply chain. A systematic progression of NpO{sub 2}/Al cermet (20 vol.% NpO{sub 2}) activities to date has successfully demonstrated target fabrication, irradiation, and chemical recovery processes. Recent program tasks have included the development of the HFIRCON transport and depletion tool for efficient reactor physics analyses and the evaluation of increased NpO{sub 2} loadings (i.e., beyond 20 vol.%) and NpN-based targets. This paper documents the deployment of the HFIRCON code to assess various Np concentrations in NpO{sub 2}- and NpN-based targets in HFIR's inner small vertical experiment facilities. Results indicate that {sup 238}Pu production and quality can be enhanced with increased Np loadings; however, target conversion rates are reduced. The results recorded in this paper, thermal and material balance evaluations, and testing requirement planning will be used to determine whether increased NpO{sub 2} loadings or NpN-based targets will be further considered. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Univariate Prediction of Hammett Parameters and Select Relative Reaction Rates Using Loewdin Atomic Charges

Loewdin charges from density functional theory calculations were used here to obtain general, univariate linear correlations for the prediction of experimental Hammett parameters and relative reaction rates. While previous studies have established that Hirshfeld and CM5 charges perform strongly as univariate predictors, the near-ubiquitous Loewdin charges have not yet been evaluated. To this end, we assess the predictive capability of Loewdin charges for three chemical systems. First, we show that Loewdin charges outperform Hirshfeld and CM5 charges for Hammett parameter prediction. Second, we see that Loewdin charges generally perform comparably to Hirshfeld charges for predicting the relative rates of olefin cleavage by photoexcited nitroarenes. The single case of poor correlation, between relative rates and the Loewdin charges on nitrogen sites, is ameliorated when considering the net charge on the NO 2 group. Third, we show that Loewdin, Hirshfeld, and CM5 charges all perform very well for generating correlations for relative reaction rates for C–H activation of 9-(4-X-phenyl)-9H-fluorene substrates by a transition metal catalyst. The equations generated throughout the study enable the prediction of Hammett parameters and relative reaction rates. Finally, these tools can accelerate synthetic and experimental studies by enabling the in silico prediction of uncharacterized chemical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A systematic method for selecting molecular descriptors as features when training models for predicting physiochemical properties

Machine learning has proven to be a powerful tool for accelerating biofuel development. Although numerous models are available to predict a range of properties using chemical descriptors, there is a trade-off between interpretability and performance. Neural networks provide predictive models with high accuracy at the expense of some interpretability, while simpler models such as linear regression often lack in accuracy. In addition to model architecture, feature selection is also critical for developing interpretable and accurate predictive models. We present a method for systematically selecting molecular descriptor features and developing interpretable machine learning models without sacrificing accuracy. Our method simplifies the process of selecting features by reducing feature multicollinearity and enables discoveries of new relationships between global properties and molecular descriptors. To demonstrate our approach, we developed models for predicting melting point, boiling point, flash point, yield sooting index, and net heat of combustion with the help of the Tree-based Pipeline Optimization Tool (TPOT). For training, we used publicly available experimental data for up to 8351 molecules. Our models accurately predict various molecular properties for organic molecules (mean absolute percent error (MAPE) ranges from 3.3% to 10.5%) and provide a set of features that are well-correlated to the property. This method enables researchers to explore sets of features that significantly contribute to the prediction of the property, offering new scientific insights. To help accelerate early stage biofuel research and development, we also integrated the data and models into a open-source, interactive web tool.

09 BIOMASS FUELS↗
DOE OSTI2025

Acetate as a Platform for Carbon-Negative Production of Renewable Fuels and Chemicals (Final Technical Report)

This project was an industrial-academic collaboration between experts at the University of Wisconsin-Madison, the University of Kentucky, and LanzaTech, a world leader in the use of gas fermentation to sustainably produce fuels and chemicals. The project developed technologies to create an integrated process for converting carbon dioxide and renewable hydrogen into molecules that can be blended with liquid transportation fuels or used in an array of chemical applications. The project was motivated by the Program Objectives of eliminating carbon dioxide release in the production of chemicals by integrating the unique and efficient capabilities of two microorganisms into a single process. The first microbe, an acetogen, produces acetate from carbon dioxide and hydrogen while the second microbe upgrades acetate from acetogen fermentation permeates to higher-value chemical products. The carbon dioxide released in the upgrading process is recycled internally to produce more acetate. As such, the process can be designed to operate with zero carbon dioxide release and net positive carbon dioxide capture. The process has the potential to provide an alternative paradigm to the current bioeconomy – one in which acetate is the primary energy carrier instead of sugars. Our process by-passes photosynthesis and the barriers created by biomass as primary chemical feedstock. As such, the process can be scaled to meet existing sources of carbon dioxide emissions and located anywhere renewable hydrogen can be provided. Our work developed microorganisms with optimized metabolism for producing acetate and other microorganisms with improved conversion of acetate to dodecanol and dodecyl-acetate. We developed synthetic biology tools for a promising non-model bacterium that could enhance metabolic engineering efforts to convert acetate to chemical products. We conducted protein engineering studies to improve the activity of key enzymes involved in our metabolic pathways. We conducted a full technoeconomic analysis that set technical targets for each strain to meet economic goals. We identified key technical barriers in our process and proposed strategies to overcome them.

09 BIOMASS FUELS↗
DOE OSTI2025

Thermophilic site-specific recombination system for rapid insertion of heterologous DNA into the Clostridium thermocellum chromosome

Clostridium thermocellum is an anaerobic thermophile capable of producing ethanol and other commodity chemicals from lignocellulosic biomass. The insertion of heterologous DNA into the C. thermocellum chromosome is currently achieved via a time-consuming homologous recombination process, where a single stable insertion can take 2–4 weeks or more to construct. In this work, we developed a thermostable version of the Serine recombinase Assisted Genome Engineering (tSAGE) approach for gene insertion in C. thermocellum utilizing a site-specific recombinase from Geobacillus sp. Y412MC61, enabling quick and easy insertion of DNA into the chromosome for accelerated genetic tool screening and heterologous gene expression. Using tSAGE, chromosomal insertion of plasmid DNA occurred at a maximum transformation efficiency of 5 × 10 3 CFU/µg, which is comparable to the transformation efficiency of a replicating control plasmid in C. thermocellum. Using tSAGE, we chromosomally integrated and characterized 17 reporter genes, 15 homologous and 31 heterologous constitutive promoters of varying strengths, 4 inducible promoters, and 5 riboswitches in C. thermocellum. We also determined that a 6–7 nucleotide gap between the ribosome binding site (RBS) and the start codon is optimal for high expression by employing a library of superfolder green fluorescent protein expression constructs driven by our strongest tested promoter (P clo1313_1194 ) with different distances between the RBS and start codon. The tools developed here will aid in accelerating C. thermocellum strain engineering for producing sustainable fuels and chemicals directly from plant biomass.

Biofuels↗
DOE OSTI2025

Zero-Field NMR and Millitesla-SLIC Spectra for >200 Molecules from Density Functional Theory and Spin Dynamics

NMR is usually performed at magnetic fields of 1 T and above to obtain sufficient sensitivity and spectral dispersion to identify chemicals based on chemical shifts and J couplings. At lower fields, the advent of hyperpolarization technologies and sensitive detectors can address sensitivity concerns. However, it remains disputed whether spectral signatures at zero and ultra-low fields are sufficient for chemical identification. Here, we report an all–electron DFT-based batch calculation of J-coupling constants, which are used to generate J coupling NMR spectra at zero field and 6.5 mT for over 200 small molecules. In the developed computational tool chain, we first used the all-electron FHI-aims code to calculate the molecular J couplings and chemical shifts. We then fed the calculated NMR parameters into the NMR simulation package SPINACH to simulate both heteronuclear J coupling spectra at zero-field, and homonuclear J coupling spectra as spin-lock induced crossing (SLIC) spectra at ultra-low field (6.5 mT). The resulting spectra demonstrate that zero and ultra-low field NMR spectra can represent unique identifiers of chemical structure for small molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1977

The use of analytical surface tools in the fundamental study of wear

Various techniques and surface tools available for the study of the atomic nature of the wear of materials are reviewed These include chemical etching, x-ray diffraction, electron diffraction, scanning electron microscopy, low-energy electron diffraction, Auger emission spectroscopy analysis, electron spectroscopy for chemical analysis, field ion microscopy, and the atom probe. Properties of the surface and wear surface regions which affect wear, such as surface energy, crystal structure, crystallographic orientation, mode of dislocation behavior, and cohesive binding, are discussed. A number of mechanisms involved in the generation of wear particles are identified with the aid of the aforementioned tools.

Buckley, D. H.↗
DOE OSTI2022

High-Speed Diagnostic and Simulation Capabilities for Reacting Hypersonic Reentry Flows (LDRD Final Report)

High-enthalpy hypersonic flight represents an application space of significant concern within the current national-security landscape. The hypersonic environment is characterized by high-speed compressible fluid mechanics and complex reacting flow physics, which may present both thermal and chemical nonequilibrium effects. We report on the results of a three-year LDRD effort, funded by the Engineering Sciences Research Foundation (ESRF) investment area, which has been focused on the development and deployment of new high-speed thermochemical diagnostics capabilities for measurements in the high-enthalpy hypersonic environment posed by Sandia's free-piston shock tunnel. The project has additionally sponsored model development efforts, which have added thermal nonequilibrium modeling capabilities to Sandia codes for subsequent design of many of our shock-tunnel experiments. We have cultivated high-speed, chemically specific, laser-diagnostic approaches that are uniquely co-located with Sandia's high-enthalpy hypersonic test facilities. These tools include picosecond and nanosecond coherent anti-Stokes Raman scattering at 100-kHz rates for time-resolved thermometry, including thermal nonequilibrium conditions, and 100-kHz planar laser-induced fluorescence of nitric oxide for chemically specific imaging and velocimetry. Key results from this LDRD project have been documented in a number of journal submissions and conference proceedings, which are cited here. The body of this report is, therefore, concise and summarizes the key results of the project. The reader is directed toward these reference materials and appendices for more detailed discussions of the project results and findings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Gas-Phase Oxidation Mechanisms of Nitrogen-Containing Organic Compounds

Nitrogen-containing organic molecules play essential roles in nearly every aspect of chemistry. The importance of these species within gas-phase chemistry has increased in recent years, due to their emissions from wildfires, crude biofuels, ammonia combustion, and CO 2 capture facilities. However, there is a lack of detailed relevant mechanistic and kinetic studies of N-compounds, resulting in poor representation of these pathways within chemical models. In this report, we detail our exploration of the gas-phase oxidation mechanisms of pyrrole, imidazole, pyrrolidine, methylamine, and dimethylamine, done by employing multiplexed VUV photoionization mass spectrometry coupled with KinBot, a computational tool that automatically explores multi-well potential energy surfaces. Overall, we vastly expanded the known gas-phase oxidation mechanisms and chemical kinetics of these species. This work will improve the accuracy and completeness of atmospheric and combustion chemistry models, ultimately leading to better-informed decision-makers in the energy and environmental sectors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Recent Advances in Picochlorum renovo Strain Development

Microalgae are amongst the most efficient phototrophs for the reduction of CO2 to industrially relevant products and product intermediates. We have recently identified a novel species in the genus Picochlorum (Picochlorum renovo) that demonstrates high areal productivity (>30 g/m2/day), high temperature and salinity tolerances, and rapid growth rate (-2 hour doubling time): attributes essential for economically viable industrial scale deployment for low value commodities (e.g. fuel and chemical precursors). Following screening of >300 algal isolates to identify Picochlorum renovo, we developed baseline genetic tools necessary for genetic engineering of the nucleus and chloroplast, and further built upon these tools to establish a protein secretion system. We have also deployed genetic engineering tools to establish the utilization of phosphite as a selectable marker in the chloroplast and nuclear genomes, while concurrently acting as a potential crop protection strategy. We have further implemented these tools to enable the utilization of formate as a novel carbon source for phototroph cultivation. Explicitly, formate toxicity was assayed, followed by introduction of a formate dehydrogenase to allow formate utilization. Cultures supplemented with formate grew to a higher density when cultivated under ambient CO2, highlighting the potential for this strategy to increase growth. Additionally, we have established a synthetic transcription factor and core promoter system which lays the foundation for tunable, high expression engineering in the nuclear genome, and potentially can be applied for universal algal genetic engineering. Finally, current work has focused on direct photosynthetic production of chemicals, and generation of mutant libraries. Combined, our work has established a robust genetic toolbox for Picochlorum renovo, which we have deployed for strain development purposes to introduce biotechnologically relevant traits.

algae↗
DOE OSTI2020

The Transient Covalent Bond in Abiotic Nonequilibrium Systems

Biochemical systems accomplish many critical functions with by operating out-of-equilibrium using the energy of chemical fuels. The formation of a transient covalent bond is a simple but very effective tool in designing analogous reaction networks. This Minireview focuses on the fuel chemistries that have been used to generate transient bonds in recent demonstrations of abiotic nonequilibrium systems (i.e., systems that do not make use of biological components). Here, fuel reactions are divided into two fundamental classifications depending on whether the fuel contributes structural elements to the activated state, a distinction that dictates how they can be used. Reported systems are further categorized by overall fuel reaction (e.g., hydrolysis of alkylating agents, carbodiimide hydration) and illustrate how similar chemistry can be used to effect a wide range of nonequilibrium behavior, ranging from self-assembly to the operation of molecular machines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fine-tuned thermally cross-linkable 6FDA-based polyimide membranes for aggressive natural gas separation

Glassy 6FDA-based polyimides are attractive membrane materials for many industrially important gas separations; however, plasticization in aggressive natural gas often causes significant loss in CO 2 /CH 4 selectivity. In this study, a family of thermally cross-linkable 6FDA-based polyimides containing carboxyl groups were synthesized and cross-linked as dense films via decarboxylation-induced thermal crosslinking. As well as chemical structure, crosslinking temperatures above and below T g are shown to be synergistic tools. Our results demonstrate that structure evolution during the decarboxylation-induced crosslinking process is affected significantly by the 3,5-diaminobenzoic acid (DABA) content in the polymer backbone. Even for a 50/50 CO 2 /CH 4 binary mixture with feed pressure up to 800 psia, decarboxylation-induced crosslinking provides attractive gas separation performance and plasticization resistance. Combined facile structure tunability, crosslinkability and high asymmetric fiber spinnability make the cross-linkable 6FDA-based polyimides a versatile platform for diverse aggressive natural gas feeds encountered in practice. Finally, our study provides insights into material design of thermally cross-linkable polymer membranes for such a broad spectrum of aggressive gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Combined Raman and Turbidity Probe for Real-Time Analysis of Variable Turbidity Streams

We know that real-time and in situ process monitoring is a powerful tool that can empower operators of hazardous processes to better understand and control their chemical systems without increased risk to themselves. However, applying monitoring techniques to complex chemical processes can face challenges. An example of this is the application of optical spectroscopy, otherwise capable of providing detailed chemical composition information, to processes exhibiting variable turbidity. Here, details on a novel combined Raman spectroscopy and turbidimetry probe are discussed. Furthermore, the analytical approach to accurately account for both Raman signal and turbidity while quantifying chemical targets is detailed. Through leveraging Raman and turbidity data simultaneously collected from the combined probe within chemometric models, accurate quantification of multiple chemical targets can be achieved under conditions of variable concentrations and turbidity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Frontiers of Ionic Liquids in Carbon Dioxide Separation and Valorization

Ionic liquids (ILs) have emerged as highly tunable sorbents and membranes for gas separation, especially in the purification of CO 2 -containing gas streams such as air, natural gas, biogas, and syngas. Their negligible volatility, high thermal stability, and chemical versatility position them as promising alternatives to conventional amine and alkaline metal derivative-based systems, effectively addressing key challenges such as volatility, stability, and high regeneration energy. Here, this Review explores IL-derived systems for CO 2 -related gas separation across dense, porous, and supported categories. At the dense liquid level, we discuss strategies for tailoring IL properties to optimize CO 2 sorption, focusing on the correlation between IL-CO 2 interaction strength, uptake capacity, and regeneration energy. Key advancements in carbon capture, including amino-functionalized (AILs) and superbase-derived ILs (SILs), are highlighted, along with strategies such as chemical structure engineering, multiple binding site integration, alternative driving force exploration, and stability enhancement. Then, the porous liquids (PLs) scale focuses on the emerging field integrating IL properties with permanent porosity engineering, spanning ultramicropores (<5 Å) to macropores (around 100 nm). These innovations improve gas uptake capacity, accelerate transport kinetics, introduce the gating effect, and enable the coexistence of active sites with antagonistic properties within a single IL medium. At the supported IL scale, the discussion shifts to IL- and ionic pair-modified sorbents and membranes, emphasizing the modulation of cations and anions, confinement effects from porous supports, and the IL–interface interaction to enhance CO 2 separation performance, particularly in diluted gas streams. Beyond separation, this Review highlights IL-based integrated processes for CO 2 capture and conversion into value-added chemicals via thermocatalytic, electrocatalytic, and photocatalytic pathways. At each scale, advanced computational and experimental tools for IL design are also discussed, providing insights into stability enhancement, sorption efficiency, and process integration. The Review concludes by addressing existing challenges and outlining future directions for IL-driven innovations in gas separation technologies.

Qiu, Liqi [Univ. of Tennessee, Knoxville, TN (Unit↗
DOE OSTI2022

Energy Storage for Manufacturing and Industrial Decarbonization (Energy StorM)

This report summarizes the needs, challenges, and opportunities associated with carbon-free energy and energy storage for manufacturing and industrial decarbonization. Energy needs and challenges for different manufacturing and industrial sectors (e.g., cement/steel production, chemicals, materials synthesis) are identified. Key issues for industry include the need for large, continuous on-site capacity (tens to hundreds of megawatts), compatibility with existing infrastructure, cost, and safety. Energy storage technologies that can potentially address these needs, which include electrochemical, thermal, and chemical energy storage, are presented along with key challenges, gaps, and integration issues. Analysis tools to value energy storage technologies in the context of manufacturing and industrial decarbonizations are also presented. Material is drawn from the Energy Storage for Manufacturing and Industrial Decarbonization (Energy StorM) Workshop, held February 8 - 9, 2022. The objective was to identify research opportunities and needs for the U.S. Department of Energy as part of its Energy Storage Grand Challenge program.

25 ENERGY STORAGE↗
DOE OSTI2024

Towards Exascale Astrophysics of Mergers and Supernovae (TEAMS)

The major goals of the TEAMS project are (i) to improve the modeling of many of the suggested astrophysical sites of the r‐process, as well as some potential p‐process sites, (ii) to use our models to support and guide the experimental efforts at FRIB and similar facilities, and (iii) to use our tools to cement our understanding of the roles that massive stars play in galactic chemical evolution. As part of the TEAMS project, Mezzacappa (UTK, Reddy (UW), Surman (ND), and Steiner (UTK) are (i) generating equations of state and neutrino opacities for simulations of core‐collapse supernovae and neutron star mergers which are more faithful to current understanding of the nucleon‐nucleon interaction, (ii) integrating those new equations of state and neutrino opacities into new simulation codes being developed, (iii) performing detailed nuclear reaction network post‐processing to determine abundances from simulations and (iv) quantifying the impact of nuclear physics uncertainties on r‐process abundances.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Multi-Task with Procter and Gamble (CRADA No. NFE-10-02672)

The purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC (the “Contractor) and Procter & Gamble Company (the “Participant”) is the development of a research partnership to create new tools, tests and analytical methods to improve the performance, safety and/or environmental quality of chemicals, advanced materials, food products and manufacturing processes. The Participant operates in three global business units: Beauty, Health and Well-Being and Household Care. Some of its worldwide products include Head and Shoulders®, Pantene®, Gillette® razors and personal care products, Crest®, Dawn®, Tide®, Bounty®, Duracell® batteries; and Iams® pet food among others. At its core, however, the Participant is a science driven company. It supports one of the most robust industrial research and development (R&D) programs in the world. The Participant uses this rich foundation of science to drive innovation across all of its product lines. But the innovation process is not confined in-house The Participant pursues an “open innovation” policy, seeking partnerships with scientists and researchers in universities and national laboratories where it can contribute its extensive knowledge assets and collaborate to advance scientific understanding. The research under this multi-task CRADA was directed under the following general task areas and, throughout the duration of this CRADA the work statement was modified to match the needs of the Parties and the direction of the research. (1) Software modeling, simulation and development; (2) Manufacturing Technologies; (3) Supply Chain Optimization, (4) Advanced Materials.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Compact Robotic Vehicle

Radio-controlled microrover features light weight and agility. Miniature robotic vehicle, called Go-For, implements new fork-wheeled mobility concept to traverse extremely rough terrain. Weighs 4 kg and is 0.4 m long, climbs over obstacles as large as 60 percent of its length. Mobility concept applied to much larger vehicles. Demonstrates such applications as exploration of planetary surfaces, military surveillance, and assessing hazardous situations. Video camera on vehicle sends images to control station, where human supervisor chooses sequence of paths to traverse to reach locations of interest. For planetary exploration, spectrometer and seisometer on vehicle sends scientific data to control station, and onboard tools collect soil and rock samples. Terrestrial version equipped similarly to take samples in chemically and/or biologically contaminated areas.

Wilcox, Brian H.↗