Search NASA⌕ Search

SEARCH · Search NASA

Results for “Collection 6”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Determination of the number of ψ(3686) events taken at BESIII*

Abstract The number ofψ(3686) events collected by the BESIII detector during the 2021 run period is determined to be (2259.3±11.1)×10 6 by counting inclusiveψ(3686) hadronic events. The uncertainty is systematic and the statistical uncertainty is negligible. Meanwhile, the numbers ofψ(3686) events collected during the 2009 and 2012 run periods are updated to be (107.7±0.6)×10 6 and (345.4±2.6)×10 6 , respectively. Both numbers are consistent with the previous measurements within one standard deviation. The total number ofψ(3686) events in the three data samples is (2712.4±14.3)×10 6 .

Physics↗

Chronic Lunar Dust Exposure on Rat Cornea: Evaluation by Gene Expression Profiling

Lunar dust is capable of entering habitats and vehicle compartments by sticking to spacesuits or other objects that are transferred into the spacecraft from the lunar surface and has been reported to cause irritation upon exposure. During the Apollo missions, crewmembers reported irritation specifically to the skin and eyes after contamination of the lunar and service modules. It has since been hypothesized that ocular irritation and abrasion might occur as a result of such exposure, impairing crew vision. Recent work has shown that both ultrafine and unground lunar dust exhibited minimal irritancy of the ocular surface (i.e., cornea); however, the assessment of the severity of ocular damage resulting from contact of lunar dust particles to the cornea has focused only on macroscopic signs of mechanical irritancy and cytotoxicity. Given the chemical reactive properties of lunar dust, exposure of the cornea may contribute to detrimental effects at the molecular level including but not limited to oxidative damage. Additionally, low level chronic exposures may confound any results obtained in previous acute studies. We report here preliminary results from a tissue sharing effort using 10‐week‐old Fischer 344 male rats chronically exposed to filtered air or jet milled lunar dust collected during Apollo 14 using a Jaeger‐NYU nose‐only chamber for a total of 120 hours (6 hours daily, 5 days a week) over a 4‐week period. RNA was isolated from corneas collected from rats at 1 day and 7 days after being exposed to concentrations of 0, 20, and 60 mg/m3 of lunar dust. Microarray analysis was performed using the Affymetrix GeneChip Rat Genome 230 2.0 Array with Affymetrix Expression Console and Transcriptome Analysis Console used for normalization and secondary analysis. An Ingenuity iReport"TM" was then generated for canonical pathway identification. The number of differentially expressed genes identified increases with dose compared to controls suggesting a more severe response to the lunar dust insult at higher levels. Pathways of interests that have been identified in all exposed samples include oxidative stress response, mitochondrial dysfunction, fibrosis, epithelial healing, TGF-Beta signaling, and extracellular matrix remodeling. Several biological processes related to cell migration, cellular proliferation, and eye development were also identified to be altered by exposure to lunar dust. Our preliminary results suggest that even a chronic insult of lunar dust as low as 20 mg/m(exp 3) elicits a molecular response in cornea tissue. Lunar dust on the surface of the moon would have the added properties of ionization and activation potentially leading to further damage to the cornea and greater sensitivity to any other environmental insult such as exposure to radiation. Additional studies are required to fully assess the risk of vision impairment and the mechanistic responses initiated in cornea exposed to lunar dust as well as the potential for long‐term effects to astronaut health

Theriot, C. A.↗

Investigation of Undissolved Solids from Salt Waste Processing Facility (SWPF) Salt Batches Collected via Filtration

SRNL researchers performed six experiments wherein 0.1 μm-grade stainless steel filters were used to filter samples pulled from salt batches 6, 9B, and 11B, without the addition of monosodium titanate. Three of these experiments were performed to collect filterable solids from each salt batch and characterize trapped solids via scanning electron microscopy. The remaining three experiments were performed to collect and then dissolve the same solids using 3.5 M nitric acid (similar to that employed in the Salt Waste Processing Facility) for characterization via Inductively-coupled plasma atomic emission spectroscopy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Exploring itinerant states in divalent hexaborides using rare-earth L edge resonant inelastic x-ray scattering

We present a study of resonant inelastic x-ray scattering (RIXS) spectra collected at the rare-earth L edges of divalent hexaborides YbB 6 and EuB 6 . In both systems, RIXS-active features are observed at two distinct resonances separated by ~10 eV in incident energy, with angle-dependence suggestive of distinct photon scattering processes. RIXS spectra collected at the divalent absorption peak resemble the unoccupied 5d density of states calculated using density functional theory. We discuss possible origins of this correspondence including a scenario which changes the 4f valence. In addition, anomalous resonant scattering is observed at higher incident energy, where no corresponding absorption feature is present. Our results demonstrate the potential for L-edge RIXS to assess the itinerant-state properties of -electron materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measuring surface fluxes in CAPE

Two stations (site 1612 and site 2008) were operated by the University of Georgia group from 6 July 1991 to 18 August 1991. The following data were collected continuously: surface energy fluxes (i.e., net radiation, soil heat fluxes, sensible heat flux and latent heat flux), air temperature, vapor pressure, soil temperature (at 1 cm depth), and precipitation. Canopy reflectance and light interception data were taken three times at each site between 6 July and 18 August. Soil moisture content was measured twice at each site.

Kanemasu, E. T.↗

Insights From Routine Microbiological Monitoring of Air in Astromaterials Curation Cleanrooms

NASA maintains nine separate cleanrooms at the Johnson Space Center to curate and preserve astromaterials samples. Routine microbial monitoring of the surfaces in these cleanrooms began in 20181. Until recently, materials compatibility requirements prevented monitoring airborne biological particles in all but one of these cleanrooms. New astromaterials collections from carbon rich asteroids are more susceptible to biological degradation than previous collections. Therefore, it is important to monitor the bioburden in the air and on surfaces in these labs. Establishing a comprehensive microbial monitoring program will help inform the monitoring and curation plans for Mars sample return which will include samples that are extremely biologically sensitive. In April of 2022 we began routinely collecting air samples in seven of the nine curation cleanrooms (Meteorite ISO 7 equivalent, Lunar ISO 6 equivalent, Stardust, Hayabusa2, OSIRIS-REx ISO 5 equivalent, and Genesis ISO 4 equivalent) using a sampling device that collects airborne biological particles on an electret filter instead conventional sampler that collect cells in a liquid media or onto organic rich Petri dishes. Electret is a generic term for electrostatically charged media. The charge on these materials increases particle trapping when compared to non-charged filters of similar thickness. N95 respirators also use electret filters. This dry sample collection method allows us to meet materials requirements for all the curation labs and reduces the risk of inadvertently introducing contamination as part of our monitoring effort. This method also allows us to preserve a portion of each sample for DNA extraction and next generation sequencing. DNA sequencing helps us to characterize the portion of the cleanroom microbiome that we cannot culture. We will present the results of our first 8 months of monitoring, compare these results to particle counts in the labs and to measurements made directly onto Petri dishes when possible. We will also make recommendations for modifications to the sampling method to improve sampling efficiency and preserve diversity.

A. B. Regberg↗

Soyuz Landing Risk Characterization

INTRODUCTION United States On-orbit Segment (USOS) astronauts have been returning to Earth from the International Space Station (ISS) aboard the Russian Soyuz vehicle since 2003. The energetics associated with Soyuz landings are comparable to our next generation of US space vehicles (Orion, Crew Dragon, and Starliner). Soyuz also lands crew in a similar state of spaceflight deconditioning that is anticipated using the future vehicles. A number of injuries have now been observed during these Soyuz landings. Currently it is unknown how Soyuz landing accelerations and the numbers and types of associated injuries relate to the new occupant protection requirements levied upon future space vehicles. Understanding this relationship will allow better quantification of the risk of injury for future spacecraft designs. METHODS An estimate of injury occurrence during Soyuz landings has been determined using data contained in NASA flight medicine databases and supplemented with data collected from crew members and flight surgeons. At the time of this abstract, 96 USOS astronauts have returned to Earth in the Soyuz (59 US, 31 International Partner, and 6 spaceflight participants). Of that total, data from 80individual crew landings has been collected through this study as of September 2023. Injuries are classified either as contusions/abrasions, Class I (minor, no medical follow-up), Class II (moderate, medical follow-up necessary), Class III (severe), or Class IV (life threatening). Current NASA occupant protection standards are primarily based on the Multi-axial Dynamic Response Index (MDRI), which is a simple lumped-parameter spring, mass, damper model tuned to human impact responses in three orthogonal axes. RESULTS Using what is known about Soyuz landing dynamics from airborne and drop test data, the MDRI predicts essentially no Class IV or III injuries, < 1% Class II injuries, and < 5% Class I injuries. Approximately one-third of all USOS crewmembers for whom data has been gathered have suffered some sort of injury related to landing in the Soyuz vehicle. Most of these injuries fall into the contusion/abrasion category (21.3%) (n.b. This is the percent for whom contusion/abrasion was the worst injury. Those with class I or II injuries typically also received contusions/abrasions). Class I injuries have been sustained by 5.0% of all crew, and Class II injuries have been observed in 3.8%. No Class III or IV injuries have been sustained to date. Forty-three injuries have been documented, with some crewmembers sustaining more than one injury in a single landing. The knee was the most likely area of injury (n=9), followed by the back (n=8), then the arm (n=7). CONCLUSION Soyuz landing dynamics are the most comparable analog environment for the anticipated loads associated with Orion and commercial crew vehicle landings. The MDRI under predicts the percentage of Class II injuries experienced during Soyuz landings, but it is better at predicting Class I injury occurrences. However, if contusions/abrasions are included in the minor injury Class I category, then the MDRI vastly under predicts those injuries as well. Given this data, it is important to re-evaluate the expected injury rates for future vehicles and work toward improving the predictive tools for spaceflight use. Spaceflight deconditioning may account for some of the under prediction, and work is ongoing to assess the relationship between landing injuries and impact tolerance changes due to spaceflight deconditioning. Future work includes expanding this study to involve private space missions on new vehicles to better characterize the effects of time in flight, suit and seat design, and vehicle dynamics.

N Newby↗

Stardust Interstellar Preliminary Examination (ISPE)

In January 2006 the Stardust sample return capsule returned to Earth bearing the first solid samples from a primitive solar system body, C omet 81P/Wild2, and a collector dedicated to the capture and return o f contemporary interstellar dust. Both collectors were approximately 0.1m(exp 2) in area and were composed of aerogel tiles (85% of the co llecting area) and aluminum foils. The Stardust Interstellar Dust Col lector (SIDC) was exposed to the interstellar dust stream for a total exposure factor of 20 m(exp 2-) day during two periods before the co metary encounter. The Stardust Interstellar Preliminary Examination ( ISPE) is a three-year effort to characterize the collection using no ndestructive techniques. The ISPE consists of six interdependent proj ects: (1) Candidate identification through automated digital microsco py and a massively distributed, calibrated search (2) Candidate extr action and photodocumentation (3) Characterization of candidates thro ugh synchrotronbased FourierTranform Infrared Spectroscopy (FTIR), S canning XRay Fluoresence Microscopy (SXRF), and Scanning Transmission Xray Microscopy (STXM) (4) Search for and analysis of craters in f oils through FESEM scanning, Auger Spectroscopy and synchrotronbased Photoemission Electron Microscopy (PEEM) (5) Modeling of interstell ar dust transport in the solar system (6) Laboratory simulations of h ypervelocity dust impacts into the collecting media

Westphal, A. J.↗

On falling film evaporator – A review of mechanisms and critical assessment of correlation on a horizontal tube bundle with updated development

Optimization of the energy efficiency and reduction of the greenhouse gas emission for the heat pump system is imperative to meet the net-zero goals at 2050. Chillers with falling film evaporator design not only possess better system performance but also contain less refrigerant inventory. Hence, accurate prediction of the evaporator performance is pivotal especially when charged with low-GWP refrigerant. Here, the study reviews the correlations for falling film evaporator with a horizontal tube bundle configuration. The major efforts of this study include four tasks: (a) literature review of the experimental studies and available empirical correlations; (b) comprehensive discussion of the falling film evaporation heat transfer mechanism; (c) development of a new rationally based correlation based on available literature; and (d) comparison of different correlations based on the existing data. The collected data includes 4114 data points from 8 sources, 6 refrigerants (R-600a, R-290, R-245fa, R-134a, R-1234ze(E), R-123), 5 types of the tubes (Plain, Turbo-GII-HP, GEWA-B, Low-fin, High-Flux), liquid Weber number from 2.2 × 10 –6 to 0.7, imposed vapor Weber number from 0 to 37.2, heat flux from 2.5 to 151.5 kW/m 2 , and film Reynolds number from 1 to 3159.8. The new correlation gives a MAD of 28.3%, and an R 2 of 0.86. Yet, the developed correlation considers various heat transfer mechanisms, including the transition point from falling film evaporation to the nucleate boiling, local evaporation, dry-out, mist flow, imposed flow, and enhanced tube effects.

42 ENGINEERING↗

Charge density waves and pinning by lattice anisotropy in 214 cuprates

The detection of static charge density waves (CDWs) in La 2-x ⁢Sr x ⁢CuO 4 (LSCO) with x ~ 0.12 at relatively high temperatures has raised the question of what lattice feature pins the CDWs. Some recent structural studies have concluded that some form of monoclinic distortion, indicated by the appearance of certain weak Bragg peaks (type M peaks) at otherwise forbidden positions, are responsible for CDW pinning. Here, as a test of this idea, we present neutron diffraction results for a single crystal of La 2-x ⁢Ba x CuO 4 (LBCO) with x = 1/8, which is known to undergo two structural transitions on cooling, from high-temperature tetragonal (HTT) to low-temperature orthorhombic (LTO) near 240 K, involving a collective tilt pattern of the corner-sharing CuO 6 octahedra, and from LTO to low-temperature tetragonal (LTT) near 56 K, involving a new tilt pattern and the appearance of intensity at peaks of type T. We observe both type M and type T peaks in the LTT phase, while the type M peaks (but not type T) are still present in the LTO phase. Given that CDW order is observed only in the LTT phase of LBCO, it is apparent that the in-plane Cu-O bond anisotropy associated with the octahedral tilt pattern is responsible for charge pinning. We point out that evidence for a similar, but weaker, bond anisotropy has been observed previously in LSCO and should be responsible for CDW pinning there. In the case of LBCO, the monoclinic distortion may help to explain previously reported magneto-optical evidence for gyrotropic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological Analysis of The SPOKE Graph

The SPOKE graph [2, 6] is a sparse decorated semantic graph representing a collection of knowledge collected in many scientific databases from the fields of healthcare, biochemistry, chemistry, biology, et cetera. This knowledge graph is stored as a relational dataset decorated with metadata on each constituent vertex and edge. Formally, the graph is G(V, E, D), where V is a set of n vertices V := {1, ..., n} and edges of the form (i, j) ϵ E for i, j ϵ V, and table D that for any item in V υ E stores unstructured data such as vertex/edge type, nature of a relationship, et cetera. D(i) = {data involving vertex i ϵ V}, and D(i, j) = {data involving edge (i, j) ϵ E}. Here, we treat the graph as undirected in the sense that a direct relationship for (i, j) causes a (possibly opposite) reverse direct relationship for (j, i). The SPOKE graph G(V, E, D) is formed by processing a collection of relational datasets from medicine, chemistry, and biology, connecting many entities. Here, we analyze an instance from 2019, Spoke-20190707, where a graph file contains 6.16M edges and associated metadata and a vertex file contains 2.15M vertices and the associated metadata. There are 12 different types of vertex entities; all edge types used are implicit (see §2). There is other metadata in D on edges and vertices, but we just use the topology and the vertex labels in this report. SPOKE is growing as more knowledge is gained and more datasets are added. SPOKE is likely to grow 10x during the next phase of this project, and we therefore would like to consider topoligical analysis techniques that are scalable to several orders of magnitude larger than the current dataset (say >1B edges).

59 BASIC BIOLOGICAL SCIENCES↗

Characteristics of differential charging of ATS-6

Thirteen days of data collected by the Auroral Particle Experiment onboard the ATS 6 were analyzed emphasizing peculiarities in the electron data attributed to differential charging. On one of these days the satellite was eclipsed by the earth at local midnight. Spectrograms were used to examine the data. It is concluded that differential charging is responsible for returning photoelectrons to the spacecraft up to a couple hundred eV, depending on the spacecraft charge. It is believed that the Minnesota experiment on ATS 6 is largely responsible for producing a potential barrier that returns particles and produces intense spon spots in the count rates.

Johnson, B.↗

Gas distribution equipment in hydrogen service - Phase II

The hydrogen permeability of three different types of commercially available natural gas polyethylene pipes was determined. Ring tensile tests were conducted on permeability-exposed and as-received samples. Hydrogen-methane leakage experiments were also performed. The results show no selective leakage of hydrogen via Poiseuille, turbulent, or orifice flow (through leaks) on the distribution of blends of hydrogen and methane. The data collected show that the polyethylene pipe is 4 to 6 times more permeable to hydrogen than to methane.

Jasionowski, W. J.↗

Interannual variability of middle atmosphere during northern winter

An investigation was undertaken to examine the characteristics of the interannual variability of the zonal wind and the temperature of the middle atmosphere of the Northern Hemisphere during winter and to search for a relationship of the variability of the middle atmosphere with the activity of the following Indian summer monsoon. For this purpose, the rocketsonde temperature and wind data for 8 stations for a 6-year period for the month of January were collected. It is clear from the results that the interannual variability noticed in the zonal wind of the high latitude middle atmosphere was caused by the differential activity of the long-period planetary waves. In order to examine whether the stability of the polar night jet in the high latitude middle atmosphere has any influence on the spectacular tropospheric weather phenomenon such as the Indian summer monsoon, the rainfall activity for India has been studied. The study revealed that: (1) the strong and stable polar night jet with weak equator to pole temperature gradient at the stratopause in January was linked with the forthcoming weak monsoon activity; and (2) the weak and distorted polar night jet with strong equator-to-pole temperature gradient at the stratopause in January was linked with the forthcoming strong monsoon activity.

Mukherjee, B. K.↗

Annotated bibliography of software engineering laboratory literature

An annotated bibliography is presented of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. The bibliography was updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials were grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

Buhler, Melanie↗

Software engineering laboratory series: Annotated bibliography of software engineering laboratory literature

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) the Software Engineering Laboratory; (2) the Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Morusiewicz, Linda↗

Annotated bibliography of software engineering laboratory literature

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Kistler, David↗

International GPS (Global Positioning System) Service for Geodynamics

The International GPS (Global Positioning System) Service for Geodynamics (IGS) began formal operation on January 1, 1994. This first annual report is divided into sections, which mirror different aspects of the service. Section (1) contains general information, including the history of the IGS, its organization, and the global network of GPS tracking sites; (2) contains information on the Central Bureau Information System; (3) describes the International Earth Rotation Service (IERS); (4) details collecting and distributing IGS data in Data Center reports; (6) describes how the IGS Analysis Centers generate their products; (7) contains miscellaneous contributions from other organizations that share common interests with the IGS.

Zumberge, J. F.↗