Search NASA⌕ Search

SEARCH · Search NASA

Results for “Control theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Digital robust control law synthesis using constrained optimization

Development of digital robust control laws for active control of high performance flexible aircraft and large space structures is a research area of significant practical importance. The flexible system is typically modeled by a large order state space system of equations in order to accurately represent the dynamics. The active control law must satisy multiple conflicting design requirements and maintain certain stability margins, yet should be simple enough to be implementable on an onboard digital computer. Described here is an application of a generic digital control law synthesis procedure for such a system, using optimal control theory and constrained optimization technique. A linear quadratic Gaussian type cost function is minimized by updating the free parameters of the digital control law, while trying to satisfy a set of constraints on the design loads, responses and stability margins. Analytical expressions for the gradients of the cost function and the constraints with respect to the control law design variables are used to facilitate rapid numerical convergence. These gradients can be used for sensitivity study and may be integrated into a simultaneous structure and control optimization scheme.

Mukhopadhyay, Vivekananda↗
NASA NTRS2012

Design of Low Complexity Model Reference Adaptive Controllers

Flight research experiments have demonstrated that adaptive flight controls can be an effective technology for improving aircraft safety in the event of failures or damage. However, the nonlinear, timevarying nature of adaptive algorithms continues to challenge traditional methods for the verification and validation testing of safety-critical flight control systems. Increasingly complex adaptive control theories and designs are emerging, but only make testing challenges more difficult. A potential first step toward the acceptance of adaptive flight controllers by aircraft manufacturers, operators, and certification authorities is a very simple design that operates as an augmentation to a non-adaptive baseline controller. Three such controllers were developed as part of a National Aeronautics and Space Administration flight research experiment to determine the appropriate level of complexity required to restore acceptable handling qualities to an aircraft that has suffered failures or damage. The controllers consist of the same basic design, but incorporate incrementally-increasing levels of complexity. Derivations of the controllers and their adaptive parameter update laws are presented along with details of the controllers implementations.

Hanson, Curt↗
NASA NTRS1972

Minimum-energy control of a class of electrically driven vehicles.

A minimum-energy controller is designed and built for a class of electrically driven vehicles according to the theoretical concepts determined by the application of modern control theory. Theoretical results are obtained by making several justifiable assumptions in the dynamical equations of the system and solving the resulting stochastic optimal control problem by Bellman's dynamic programming technique. Several practical and economical considerations are taken into account for the mechanization of the minimum-energy control law.

Sahinkaya, Y. E.↗
NASA NTRS1984

Concepts and algorithms for terminal-area traffic management

The nation's air-traffic-control system is the subject of an extensive modernization program, including the planned introduction of advanced automation techniques. This paper gives an overview of a concept for automating terminal-area traffic management. Four-dimensional (4D) guidance techniques, which play an essential role in the automated system, are reviewed. One technique, intended for on-board computer implementation, is based on application of optimal control theory. The second technique is a simplified approach to 4D guidance intended for ground computer implementation. It generates advisory messages to help the controller maintain scheduled landing times of aircraft not equipped with on-board 4D guidance systems. An operational system for the second technique, recently evaluated in a simulation, is also described.

Erzberger, H.↗
NASA NTRS1975

Guidance of an aeromaneuvering orbit-to-orbit shuttle through a statistically varying atmosphere

One candidate for a reusable upper stage to be carried by the space shuttle is an aeromaneuvering orbit-to-orbit shuttle (AMOOS). This concept uses the drag of the vehicle during a pass through the atmosphere rather than the propulsion system to slow the vehicle on a return from a high energy orbit. The nature and magnitude of the sensitivity of AMOOS to uncertainties in the properties of the atmosphere are shown. Various guidance schemes for correcting for the effects that the unpredictable variations in the atmosphere have on the trajectory are discussed. For the mission studied here, a payload retrieval from geosynchronous orbit with aerodynamic plane change, a linear feedback guidance scheme was developed. A relatively simple heuristic law was used to demonstrate the concept. Using optimal control theory a feedback law was developed analytically. Testing with a large number of different atmospheres showed this law to be a feasible means of controlling the AMOOS trajectory. Refinements to the technique offer promise of significant improvement, and these are discussed.

Rehder, J. J.↗
NASA NTRS1990

An LQR controller design approach for a Large Gap Magnetic Suspension System (LGMSS)

Two control approaches for a Large Gap Magnetic Suspension System (LGMSS) are investigated and numerical results are presented. The approaches are based on Linear Quadratic Regulator (LQR) control theory and include a nonzero set point regulator with constant disturbance input and an integral feedback regulator. The LGMSS provides five degree of freedom control of a cylindrical suspended element which is composed of permanent magnet material. The magnetic actuators are air core electromagnets mounted in a planar way.

Groom, Nelson J.↗
NASA NTRS2003

Multiple Autonomous Discrete Event Controllers for Constellations

The Multiple Autonomous Discrete Event Controllers for Constellations (MADECC) project is an effort within the National Aeronautics and Space Administration Goddard Space Flight Center's (NASA/GSFC) Information Systems Division to develop autonomous positioning and attitude control for constellation satellites. It will be accomplished using traditional control theory and advanced coordination algorithms developed by the Johns Hopkins University Applied Physics Laboratory (JHU/APL). This capability will be demonstrated in the discrete event control test-bed located at JHU/APL. This project will be modeled for the Leonardo constellation mission, but is intended to be adaptable to any constellation mission. To develop a common software architecture. the controllers will only model very high-level responses. For instance, after determining that a maneuver must be made. the MADECC system will output B (Delta)V (velocity change) value. Lower level systems must then decide which thrusters to fire and for how long to achieve that (Delta)V.

Esposito, Timothy C.↗
NASA NTRS1996

A dynamical model for reflex activated head movements in the horizontal plane

We present a controls systems model of horizontal-plane head movements during perturbations of the trunk, which for the first time interfaces a model of the human head with neural feedback controllers representing the vestibulocollic (VCR) and the cervicocollic (CCR) reflexes. This model is homeomorphic such that model structure and parameters are drawn directly from anthropomorphic, biomechanical and physiological studies. Using control theory we analyzed the system model in the time and frequency domains, simulating neck movement responses to input perturbations of the trunk. Without reflex control, the head and neck system produced a second-order underdamped response with a 5.2 dB resonant peak at 2.1 Hz. Adding the CCR component to the system dampened the response by approximately 7%. Adding the VCR component dampened head oscillations by 75%. The VCR also improved low-frequency compensation by increasing the gain and phase lag, creating a phase minimum at 0.1 Hz and a phase peak at 1.1 Hz. Combining all three components (mechanics, VCR and CCR) linearly in the head and neck system reduced the amplitude of the resonant peak to 1.1 dB and increased the resonant frequency to 2.9 Hz. The closed loop results closely fit human data, and explain quantitatively the characteristic phase peak often observed.

NASA Discipline Neuroscience↗
NASA NTRS1971

A Transformation Approach to Optimal Control Problems with Bounded State Variables

A technique is described and utilized in the study of the solutions to various general problems in optimal control theory, which are converted in to Lagrange problems in the calculus of variations. This is accomplished by mapping certain properties in Euclidean space onto closed control and state regions. Nonlinear control problems with a unit m cube as control region and unit n cube as state region are considered.

Hanafy, Lawrence Hanafy↗
NASA NTRSDate not supplied

Experimental Testing of Advanced Generalized Predictive Control for Stability Augmentation and Vibration Reduction of Tiltrotor Aircraft

Generalized Predictive Control (GPC) is an advanced form of an adaptive control algorithm that uses experimentally acquired data to determine the input-output relationship of complex systems through a process called system identification (system ID). GPC has historically been applied to wind tunnel tests of dynamically-scaled tiltrotor aircraft for stability augmentation and vibration reduction since the complex nature of these dynamic systems does not lend itself well to traditional control theory. Advanced GPC (AGPC) improves upon traditional GPC by enabling self-adaptation as conditions change from those used to acquire the system ID and controller performance would normally erode. The present research expands upon previous analytical development and demonstration of AGPC with experimental demonstration. To support AGPC, this present work also identifies and describes figures of merit that define a good working controller and quantifies the uniqueness of the control inputs and quality of the system ID parameters. The present research demonstrates that AGPC consistently performs better than traditional GPC and can successfully adapt to changing conditions.

Active Controls↗
NASA NTRSDate not supplied

Experimental Testing of Advanced Generalized Predictive Control for Stability Augmentation and Vibration Reduction of Tiltrotor Aircraft

Generalized Predictive Control (GPC) is an advanced form of an adaptive control algorithm that uses experimentally acquired data to determine the input-output relationship of complex systems through a process called system identification (system ID). GPC has historically been applied to wind tunnel tests of dynamically-scaled tiltrotor aircraft for stability augmentation and vibration reduction since the complex nature of these dynamic systems does not lend itself well to traditional control theory. Advanced GPC (AGPC) improves upon traditional GPC by enabling self-adaptation as conditions change from those used to acquire the system ID and controller performance would normally erode. The present research expands upon previous analytical development and demonstration of AGPC with experimental demonstration. To support AGPC, this present work also identifies and describes figures of merit that define a good working controller and quantifies the uniqueness of the control inputs and quality of the system ID parameters. The present research demonstrates that AGPC consistently performs better than traditional GPC and can successfully adapt to changing conditions.

Active Controls↗
NASA NTRS1979

Application of two synthesis methods for active flutter suppression on an aeroelastic wind tunnel model

Two flutter suppression control laws have been synthesized, implemented, and demonstrated on an aeroelastic wind-tunnel model of a transport-type wing. One control law was synthesized using an aerodynamic energy method and the other from using results of optimal control theory. At M = 0.95, the model was tested to a dynamic pressure 44 percent above the system-off flutter dynamic pressure. Both synthesis methods yielded control laws effective in suppressing flutter. The experimental results also indicate that wind-tunnel turbulence is an important factor in the experimental demonstration of system performance.

Abel, I.↗
NASA NTRS1976

Stability and control of maneuvering high-performance aircraft

Stability and control characteristics of a high-performance aircraft have been examined over a wide range of maneuvering flight conditions, in order to identify general rules for the design of departure-preventing control systems. This has been accomplished using fully coupled linear dynamic models which account for nonzero mean values of aerodynamic angles and angular rates. Stability augmentation systems derived from optimal control theory are shown to maintain stable, well-damped aircraft dynamics over a wide range of maneuvering flight conditions. This design approach generates cross-feeds and control interconnects (as well as conventional feedback terms) for improved aircraft stability.

Stengel, R. F.↗
NASA NTRS1985

Time-optimal bang-bang slew of rigidized SCOLE configuration

This paper addresses: (1) an application of the well-known time-optimal bang-bang control theory to the design of minimal-time limited-torque single-axis slew maneuvers for the rigidized configuration of NASA Langley Research Center's Spacecraft Control Laboratory Experiment (SCOLE) and (2) the associated generic side effects due to spillover of slew motions and applied torques. Numerical experiments that helped pinpoint the specific causes of performance degradation are discussed. Analytical as well as scientifically interesting numerical research results are given.

Lin, J. G.↗
NASA NTRS1985

Controller design and parameter identifiability studies for a large space antenna

The problem of control systems synthesis and parameter identifiability are considered for a large, space-based antenna. Two methods are considered for control system synthesis, the first of which uses torque actuators and collocated attitude and rate sensors, and the second method is based on the linear-quadratic-Gaussian (LQG) control theory. The predicted performance obtained by computing variances of pointing, surface and feed misalignment errors in the presence of sensor noise indicates that the LQG-based controller yields superior results. Since controller design requires the knowledge of the system parameters, the identifiability of the structural parameters is investigated by obtaining Cramer-Rao lower bounds. The modal frequencies are found to have the best identifiability, followed by damping ratios, and mode-slopes.

Joshi, S. M.↗
NASA NTRS1987

On-Orbit System Identification

Information derived from accelerometer readings benefits important engineering and control functions. Report discusses methodology for detection, identification, and analysis of motions within space station. Techniques of vibration and rotation analyses, control theory, statistics, filter theory, and transform methods integrated to form system for generating models and model parameters that characterize total motion of complicated space station, with respect to both control-induced and random mechanical disturbances.

Mettler, E.↗