Tailoring the stiffness of large mirrors to reduce specific optical aberrations
Method for correcting radial aberrations of a circular mirror continuously supported at the outer edge.
Christopher L. Hopkins↗
SEARCH · Search NASA
Results for “Correction Method”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Characterization of Slat Noise Radiation from a High-Lift Common Research Model
A test campaign was conducted in the open-jet test section of the NASA Langley 14- by 22-Foot Subsonic Tunnel on a 10%-scale, semispan version of a High-Lift Common Research Model (CRM-HL) incorporating a leading-edge slat, trailing-edge flap and removable high-fidelity main landing gear. Aerodynamic and far field acoustic measurements were obtained on baseline and acoustically treated model configurations using an ensemble of time-averaged and unsteady surface pressure sensors paired with a traversing 97-microphone phased array viewing the pressure side of the airframe. A modified version of the DAMAS deconvolution method incorporating corrections for shear layer acoustic wave decorrelation was employed to determine the locations and strengths of relevant noise sources along the span of the slat and in the vicinity of the flap edges and landing gear. The main goal of the test campaign was to use the surface pressure and array data to evaluate the effectiveness of various slat noise reduction concepts. It was found that slat-gap fillers produced significant broadband noise reduction with minimal aerodynamic performance penalties for all Mach numbers and airfoil angles of attack that were investigated. The test campaign clearly demonstrated the noise reduction benefits that can be obtained by applying appropriate treatments to leading-edge slats on commercial transport-class aircraft.
Aeronautics Research Mission Directorate↗
Modeling Measurement Error in Dose-Response Models of Community Annoyance to Low-Noise Supersonic Flight
The primary research goal of the forthcoming NASA Quesst mission community test campaign is to collect representative community response data in support of the development of supersonic overflight noise certification standards. Beginning in 2026, NASA will fly the novel X-59 demonstrator aircraft over select communities in United States in order to demonstrate the possibility of low-noise supersonic flight over land and to collect objective measurements and subjective data on the perceptual experience of this new noise source. It is believed that a regression of a binary perceptual response (‘highly annoyed’ or ‘not’) on estimated noise levels (doses, measured in decibels) will provide a useful dose-response relationship for regulators. However, as these estimated doses will be subject to measurement error, naïve estimators of regression coefficients are inconsistent and slopes may be subject to attenuation bias. In this presentation, I contrast functional modeling of measurement error via simulation extrapolation (SIMEX) with structural Bayesian measurement error models. These methods are applied to available data collected during two NASA risk reduction studies in California in 2011 and Texas in 2018. I’ll conclude noting that in the presence of nonnegligible measurement errors, probabilities of annoyance may be overpredicted for low noise levels and underpredicted for high noise levels, therefore, methods of correcting for measurement error will be necessary to improve the utility of the dose-response relationship for policy-making purposes.
simulation↗
The geometric correction of Landsat-type imagery using perturbation techniques
A method for geometric correction data calculation is based on decomposition of image distortions into nominal distortions and perturbations, caused by deviations from the nominal spacecraft motion and sensor pointing. The maximal errors of the method are of the order of 5 m, and the average errors are less than 0.6 m (sigma).
Levine, I.↗
A critical study of higher-order numerical methods for solving the boundary-layer equations
A fourth-order box method is presented for calculating numerical solutions to parabolic, partial differential equations in two variables or ordinary differential equations. The method is the natural extension of the second-order Keller Box Scheme to fourth order and is demonstrated with application to the incompressible, laminar and turbulent boundary-layer equations. The efficiency of the present method is compared with other two-point and three-point higher-order methods; namely, the Keller Box Scheme with Richardson extrapolation, the method of deferred corrections, and the three-point spline methods. For equivalent accuracy, numerical results show the present method to be more efficient than the other higher-order methods for both laminar and turbulent flows.
Wornom, S. F.↗
A study of high density bit transition requirements versus the effects on BCH error correcting coding
Several methods for increasing bit transition densities in a data stream are summarized, discussed in detail, and compared against constraints imposed by the 2 MHz data link of the space shuttle high rate multiplexer unit. These methods include use of alternate pulse code modulation waveforms, data stream modification by insertion, alternate bit inversion, differential encoding, error encoding, and use of bit scramblers. The psuedo-random cover sequence generator was chosen for application to the 2 MHz data link of the space shuttle high rate multiplexer unit. This method is fully analyzed and a design implementation proposed.
Ingels, F.↗
Methodology for matching experimental and computational aerodynamic data
Correction factor methodologies have been developed which use steady experimental or analytical pressure or force data to correct steady and unsteady aerodynamic calculations. Three methods of calculating correction factors have been developed to match steady surface pressure distributions, to match airfoil section forces and moments. Data for a rectangular supercritical wing that was previously tested in the NASA Langley Research Center Transonic Dynamics Tunnel have been used to determine correction factors to match surface pressure distributions for a range of Mach numbers.
Wieseman, Carol D.↗
Methodology for matching experimental and analytical aerodynamic data
Correction factor methodologies have been developed which use steady experimental or analytical pressure or force data to correct steady and unsteady aerodynamic calculations. Three methods of calculating correction factors have been developed to match steady surface pressure distributions, to match airfoil section forces and moments, and to match total forces and moments. Data for a rectangular supercritical wing that was previously tested in the NASA Langley Research Center Transonic Dynamics Tunnel have been used to determine correction factors to match surface pressure distributions for a range of Mach numbers.
Wieseman, Carol D.↗
On the concept of varying influence radii for a successive corrections objective analysis
This paper discusses objective analysis techniques known as 'methods of successive corrections' which were introduced by Cressman (1959) and developed for the analysis of mesoscale weather systems by Barnes (1964 and 1973). Theoretical filter response characteristics of the Barnes method are compared for filter parameters set to retrieve the short wavelengths and then build in the long wavelengths. The accuracy of the method is judged by the ability of the filters to restore desired wavelengths and remove undesired wavelengths. It was found that no single selection of filter parameters for the two-pass Barnes method gives the best analysis for all wavelengths. A three-pass hybrid method is shown to reduce this problem.
Achtemeier, Gary L.↗
Comparison of three atmospheric correction models for a vegetated airborne visible/infrared imaging spectrometer (AVIRIS) scene
Current atmospheric correction models applied to imaging spectroscopy data include such methods as residual or scene average, flat field correction, regression method or empirical line algorithm, the continuum interpolated band ratio (CIBR) derivation and the LOWTRAN 7 method. Due to the limitations of using residual and flat field corrections on vegetated scenes, three methods will be compared: regression, CIBR derivation and LOWTRAN 7. Field-measured bright and dark targets taken at the time of the 13 April, 1989 AVIRIS overflight of Jasper Ridge, California were used to formulate the regression method atmospheric correction. Using this corrected scene as 'ground truth', the CIBR derivation and the LOWTRAN 7 method with both input models are compared on the vegetated Jasper Ridge scene. Although representing a qualitative approach, this is a first approximation and shows the need for more quantitative analysis.
Van Den Bosch, J. M.↗
Guidance of space vehicles by radio measurements and command. appendix a - correcting velocity components. appendix b - magnitude of the maneuver. appendix c - outline of the method of computing the orbit.
Correction of space trajectories by small midcourse maneuvers governed by impulse which is computed on the ground from radio measurements and sent by radio to the space probe
GUIDANCE (MOTION)↗
Live-timer method of automatic dead-time correction for precision counting
Automatic correction for dead time losses in nuclear counting experiments is implemented by a simple live timer arrangement in which each counting interval is extended for compensation for the dead time during that interval. this method eliminates repetitious manual calculations, source of error, and dependence upon paralysis shifts.
Porges, K. G.↗
Ozone Correction for AM0 Calibrated Solar Cells for the Aircraft Method
The aircraft solar cell calibration method has provided cells calibrated to space conditions for 37 years. However, it is susceptible to systematic errors due to ozone concentration in the stratosphere. The present correction procedure applies a 1% increase to the measured Isc values. High band-gap cells are more sensitive to ozone adsorbed wavelengths so it has become important to reassess the correction technique. This paper evaluates the ozone correction to be 1+{O3}sup Fo, where Fo is 29.5x10(exp-6)/d.u. for a Silicon solar cell and 42.2xl0(exp -6)/d.u. for a GaAs cell. Results will be presented for high band-gap cells. A comparison with flight data indicates that this method of correcting for the ozone density improves the uncertainty of AM0 Isc to 0.5%.
Snyder, David B.↗
The free and forced vibrations of structures using the finite dynamic element method
In addition to an extensive review of the literature on exact and corrective displacement based methods of vibration analysis, a few theorems are proven concerning the various structural matrices involved in such analyses. In particular, the consistent mass matrix and the quasi-static mass matrix are shown to be equivalent, in the sense that the terms in their respective Taylor expansions are proportional to one another, and that they both lead to the same dynamic stiffness matrix when used with the appropriate stiffness matrix.
Fergusson, Neil J.↗
The TRMM Precipitation Radar: Opportunities and Challenges
Although studies on the feasibility of spaceborne weather radar date back to the 1960's, it was only with the launch of the Tropical Rainfall Measuring Mission (TRMM) Satellite in November 1997 that the first weather radar was placed into low earth orbit. The long delay between the initial concept and implementation was caused not only by the demanding requirements of active sensors such as mass, power, and reliability, but because of scientific and technological challenges. For example, the demand for adequate spatial resolution arises from the need to resolve the horizontal structure of convective storm cells and to avoid surface contamination of the rain return at off-nadir angles. To achieve a horizontal resolution on the order of 4 km from low earth orbit with a modest antenna size of 2 m requires the use of a much higher frequency (Ku-band) than those typically used for ground-based weather radars (S- and C-band). Higher frequencies are subject to higher attenuation. As Hitschfeld and Bordan (1954) showed in their classic paper, attenuation correction with a single-wavelength radar is inherently unstable at high attenuations unless the drop size distribution and the radar constant are known precisely. Since these conditions are seldom met, much work over the last decade has been devoted to formulating and testing alternative methods of attenuation correction. The operational method used in the TRMM radar processing is discussed in section 3 of the paper.
Meneghini, R.↗
A wall interference assessment/correction system
A Wall Signature method, the Hackett method, has been selected to be adapted for the 12-ft Wind Tunnel wall interference assessment/correction (WIAC) system in the present phase. This method uses limited measurements of the static pressure at the wall, in conjunction with the solid wall boundary condition, to determine the strength and distribution of singularities representing the test article. The singularities are used in turn for estimating wall interferences at the model location. The Wall Signature method will be formulated for application to the unique geometry of the 12-ft Tunnel. The development and implementation of a working prototype will be completed, delivered and documented with a software manual. The WIAC code will be validated by conducting numerically simulated experiments rather than actual wind tunnel experiments. The simulations will be used to generate both free-air and confined wind-tunnel flow fields for each of the test articles over a range of test configurations. Specifically, the pressure signature at the test section wall will be computed for the tunnel case to provide the simulated 'measured' data. These data will serve as the input for the WIAC method-Wall Signature method. The performance of the WIAC method then may be evaluated by comparing the corrected parameters with those for the free-air simulation. Each set of wind tunnel/test article numerical simulations provides data to validate the WIAC method. A numerical wind tunnel test simulation is initiated to validate the WIAC methods developed in the project. In the present reported period, the blockage correction has been developed and implemented for a rectangular tunnel as well as the 12-ft Pressure Tunnel. An improved wall interference assessment and correction method for three-dimensional wind tunnel testing is presented in the appendix.
Lo, Ching F.↗
A Doubles Correction to Electronic Excited States from Configuration Interaction in the Space of Single Substitutions
A perturbative correction to the method of configuration interaction with single substitutions (CIS) is presented. This CIS(D) correction approximately introduces the effect of double substitutions which are absent in CIS excited states. CIS(D) is a second-order perturbation expansion of the coupled-cluster excited state method, restricted to single and double substitutions, in a series in which CIS is zeroth order, and the first-order correction vanishes. CIS (D) excitation energies are size consistent and the calculational complexity scales with the fifth power of molecular size, akin to second-order Moller-Plesset theory for the ground state. Calculations on singlet excited states of ethylene, formaldehyde, acetaldehyde, butadiene and benzene show that CIS (D) is a uniform improvement over CIS. CIS(D) appears to be a promising method for examining excited states of large molecules, where more accurate methods are not feasible.
Head-Gordon, Martin↗
Post-flight differential correction analysis using Vinti's spheroidal method for the small astronomy satellite orbit
The results of an intensive analysis of a differential orbit improvement method utilizing observational data for a 550-kilometer altitude, near-circular, near-equatorial satellite orbit are presented. Observations of the Small Astronomy Satellite (SAS-1) are in the form of direction cosines as measured at two ground interferometer tracking stations near the Equator during the first 22 orbital revolutions (approximately 37 hours) after launch of the spacecraft. Numerical results, in both tabular and graphical form, are displayed for numerous iterated fittings of various observational arcs by differential correction of the orbital elements. Parameters varied in these comparative cases include the time duration of the observational data block, the number of pairs of direction cosine data and the number of tracking station passes included in the solution, the distribution of such passes between the two available tracking stations, and the acceptance criterion for the observational residuals in the least squares fitting procedure. It was found that three observational pairs of direction cosine data, the minimum number possible for a uniquely determined solution in theory, are sufficient to promote covergence to an accurate solution, if properly selected.
Walden, H.↗