Search NASA⌕ Search

SEARCH · Search NASA

Results for “DATABASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Incremental Aerodynamic Coefficient Database for the USA2

In March through May of 2016, a wind tunnel test was conducted by the Aerosciences Branch (EV33) to visually study the unsteady aerodynamic behavior over multiple transition geometries for the Universal Stage Adapter 2 (USA2) in the MSFC Aerodynamic Research Facility's Trisonic Wind Tunnel (TWT). The purpose of the test was to make a qualitative comparison of the transonic flow field in order to provide a recommended minimum transition radius for manufacturing. Additionally, 6 Degree of Freedom force and moment data for each configuration tested was acquired in order to determine the geometric effects on the longitudinal aerodynamic coefficients (Normal Force, Axial Force, and Pitching Moment). In order to make a quantitative comparison of the aerodynamic effects of the USA2 transition geometry, the aerodynamic coefficient data collected during the test was parsed and incorporated into a database for each USA2 configuration tested. An incremental aerodynamic coefficient database was then developed using the generated databases for each USA2 geometry as a function of Mach number and angle of attack. The final USA2 coefficient increments will be applied to the aerodynamic coefficients of the baseline geometry to adjust the Space Launch System (SLS) integrated launch vehicle force and moment database based on the transition geometry of the USA2.

Richardson, Annie Catherine↗
NASA NTRS2016

A Database of Interplanetary and Interstellar Dust Detected by the Wind Spacecraft

It was recently discovered that the WAVES instrument on the Wind spacecraft has been detecting, in situ, interplanetary and interstellar dust of approximately 1 micron radius for the past 22 years. These data have the potential to enable advances in the study of cosmic dust and dust-plasma coupling within the heliosphere due to several unique properties: the Wind dust database spans two full solar cycles; it contains over 107,000 dust detections; it contains information about dust grain direction of motion; it contains data exclusively from the space environment within 350 Earth radii of Earth; and it overlaps by 12 years with the Ulysses dust database. Further, changes to the WAVES antenna response and the plasma environment traversed by Wind over the lifetime of the Wind mission create an opportunity for these data to inform investigations of the physics governing the coupling of dust impacts on spacecraft surfaces to electric field antennas. A Wind dust database has been created to make the Wind dust data easily accessible to the heliophysics community and other researchers. This work describes the motivation, methodology, contents, and accessibility of the Wind dust database.

interplaneary dust↗
NASA NTRS2017

Mass and Reliability Source (MaRS) Database

The Mass and Reliability Source (MaRS) Database consolidates components mass and reliability data for all Oribital Replacement Units (ORU) on the International Space Station (ISS) into a single database. It was created to help engineers develop a parametric model that relates hardware mass and reliability. MaRS supplies relevant failure data at the lowest possible component level while providing support for risk, reliability, and logistics analysis. Random-failure data is usually linked to the ORU assembly. MaRS uses this data to identify and display the lowest possible component failure level. As seen in Figure 1, the failure point is identified to the lowest level: Component 2.1. This is useful for efficient planning of spare supplies, supporting long duration crewed missions, allowing quicker trade studies, and streamlining diagnostic processes. MaRS is composed of information from various databases: MADS (operating hours), VMDB (indentured part lists), and ISS PART (failure data). This information is organized in Microsoft Excel and accessed through a program made in Microsoft Access (Figure 2). The focus of the Fall 2017 internship tour was to identify the components that were the root cause of failure from the given random-failure data, develop a taxonomy for the database, and attach material headings to the component list. Secondary objectives included verifying the integrity of the data in MaRS, eliminating any part discrepancies, and generating documentation for future reference. Due to the nature of the random-failure data, data mining had to be done manually without the assistance of an automated program to ensure positive identification.

Valdenegro, Wladimir↗
NASA NTRS2018

Ascent Aerodynamic Force and Moment Database Development for the Space Launch System

The Space Launch System Aerodynamics Task Team is responsible for delivering aerodynamic force and moment databases from liftoff through ascent until the rocket leaves the Earth’s atmosphere. The process for developing the ascent portion of this database is described in the current paper. The data used to develop the database were generated using a combination of wind tunnel testing and CFD simulations. The details of the wind tunnel testing performed at the NASA Ames Unitary Plan Wind Tunnel and CFD simulations performed using FUN3D at wind tunnel and flight conditions are discussed, and comparisons of these data sets are provided. The methods used for converting the source data into the final database response surfaces with corresponding uncertainty are also detailed.

Shea, Patrick R.↗
NASA NTRS2020

Urban Air Mobility Generation 1 Acoustic Database

An acoustic database has been generated in support of the NASA Revolutionary Vertical Lift Technology (RVLT) project, Technical Challenge (TC) TC.UAM.Noise.1, entitled “Urban Air Mobility Operational Fleet Noise Assessment.” As part of that TC, a periodic (approximately annual) development of an acoustic database will be performed based on the latest available information. The release of the first such database, namely, the “Gen 1 database for fleet noise assessments,” developed in support of RVLT milestone RVLT.23.02.L350, is the subject of this document.

urban air mobility↗
NASA NTRS2022

Enhancement of a global lake and reservoir database to aid climate studies and resource monitoring utilizing satellite radar altimetry

Here, we describe the expansion and enhancement of a large (surface area ≥100 sq. km) lake and reservoir database (1.GREALD). These efforts have also resulted in the spin-off of two additional databases, one containing lakes and reservoirs (2.GREALD, area 10–99 sq. km), and the other containing ephemeral lakes (3.GELD, area ≥100 sq. km). These databases are unique sources for projects that utilize satellite radar altimeter data to monitor surface water levels. While 1.GREALD aims to be a complete catalog, 2.GREALD focuses on reservoirs in response to applied sciences programs that monitor water and energy resources. The creation of 3.GELD has climate change objectives as well as water resources and ecosystem conservation applications. The recording of information pertaining to the potential overpasses (waterbody crossings) of the current and archive satellite altimeters is a primary objective as is the need to highlight any form of controlled water level variation. The permanent water databases now contain 6282 entries, half experience some form of anthropogenic influence and ∼430 have been identified as potential climatically sensitive terminal lakes. The revised integral surface area distribution is a power law with exponent −1.016. Statistics reveal that with altimetric repeat visit times of 10-day to monthly, at least 80% of the permanent water bodies (≥10 sq. km) have been overflown at some period since the 1990s. Current information on water use and reservoir formation date show that the primary use of the reservoir class is hydroelectric power, and that China, Brazil, India, Turkey, and Vietnam dominate the dam building in recent decades.

Charon M. Birkett↗
NASA NTRS2022

Greenland Geothermal Heat Flow Database and Map (Version 1)

We compile and analyze all available geothermal heat flow measurements collected in and around Greenland into a new database of 419 sites and generate an accompanying spatial map. This database includes 290 sites previously reported by the International Heat Flow Commission (IHFC), for which we now standardize measurement and metadata quality. This database also includes 129 new sites, which have not been previously reported by the IHFC. These new sites consist of 88 offshore measurements and 41 onshore measurements, of which 24 are subglacial. We employ machine learning to synthesize these in situ measurements into a gridded geothermal heat flow model that is consistent across both continental and marine areas in and around Greenland. This model has a native horizontal resolution of 55 km. In comparison to five existing Greenland geothermal heat flow models, our model has the lowest mean geothermal heat flow for Greenland onshore areas. Our modeled heat flow in central North Greenland is highly sensitive to whether the NGRIP (North GReenland Ice core Project) elevated heat flow anomaly is included in the training dataset. Our model's most distinctive spatial feature is pronounced low geothermal heat flow (< 40 mW m−2) across the North Atlantic Craton of southern Greenland. Crucially, our model does not show an area of elevated heat flow that might be interpreted as remnant from the Icelandic plume track. Finally, we discuss the substantial influence of paleoclimatic and other corrections on geothermal heat flow measurements in Greenland. The in situ measurement database and gridded heat flow model, as well as other supporting materials, are freely available from the GEUS Dataverse (https://doi.org/10.22008/FK2/F9P03L; Colgan and Wansing, 2021).

William Colgan↗
NASA NTRSDate not supplied

Multihierarchy Gaussian Process Models for Probabilistic Aerodynamic Databases using Uncertain Nominal and Off-Nominal Configuration Data

Probabilistic aerodynamic databases are a crucial component of the development lifecycle for aerospace vehicles. A key challenge when building aerodynamic databases is that most data used to construct them represent various simplifications of the real flight vehicle. For example, wind tunnel models often simplify the vehicle geometry and surface roughness characteristics, while CFD computations often make simplifications to the physics being modeled, such as fully laminar or turbulent calculations. Multifidelity data fusion models rely on a user being able to define a hierarchy of fidelity levels anchored to some "truth" data. This approach is unsatisfactory when no data can be considered to accurately reflect real flight conditions. In this work, we provide an alternative approach by presenting a consistent mathematical framework for building probabilistic aerodynamic databases in the form of a conditional probability distribution described by an ensemble of multifidelity Gaussian Processes. Instead of relying on a single hierarchy of data fidelity levels, the presented framework identifies a "nominal" configuration and potential corrections to the nominal which represent specific physical phenomena not represented in the nominal data. The nominal and correction functions themselves are constructed as multifidelity Gaussian Processes and linearly combined to form an ensemble model which fuses the uncertainties associated nominal and correction models. Results obtained using the proposed framework on a simplified Orion Crew Module wind tunnel dataset demonstrate the predictive capability of the multihierarchy framework. We further demonstrate the benefits of such a probabilistic aerodynamic database approach through function sampling and computing the conditional distributions of derived quantities, such as the trim angle of attack and aerodynamic coefficients at trim.

Gaussian Processes↗
NASA NTRSDate not supplied

Parahydrogen Properties Version 05 Database Release for Nuclear Thermal Propulsion Applications

Consistent modeling assumptions across any large project are crucial to minimize errors between different approaches. Use of consistent material and fluid properties across a large project supports consistent interpretation and application within modeling and simulation results as well as their relevancy to operational systems. NASA’s Space Nuclear Propulsion program dedicates extensive resources towards establishing consistent and, to the extent possible, accurate property databases for its internal staff and all external partners. This work highlights the extensive research performed to modernize the fluid property database of hydrogen which is the leading propellant option for in-space nuclear propelled spacecraft. Specifically, the parahydrogen spin state is of interest since the propellant is stored in a near normal boiling point liquid state which results in it consisting almost entirely of the parahydrogen spin isomer. This database tool has taken recent NASA work and modernized it into a python-based package for easy usage across all modeling entities. The package allows users to provide temperature and pressure pairs along with their desired output properties to yield results accounting for both real-gas and equilibrium dissociation effects while also sharing the default thermodynamic reference state provided by the National Institute of Standards and Technology (NIST) Standard Database 23. The suite also includes advanced capabilities to increase usability, such as on-the-fly interpolation and multidimensional plotting.

Nuclear Thermal Propulsion↗
NASA NTRSDate not supplied

Analysis of Ground-Based Observations of TLES From Spritacular Project Database

Spritacular is a citizen science project that was launched in October of 2022. It provides a space for anyone to submit their transient luminous event (TLE) images along with observational information, i.e. time, geographic location, direction, camera setup. Along with submissions, one can also help identify different types of TLEs in the images submitted. Since its inception hundreds of images have been submitted to the project database by its users. Not only does the database itself provide a record of observations, but these submissions allow for scientists with access to a wider array of observational platforms to obtain a better understanding of TLE’s without having to chase or hunt for them. Citizen science databases come with pros and cons when dealing with observational science and trying to work across different platforms. Using this database, over one hundred sprites were found to have accurate pointing and adequate temporal resolution to attempt to match both ground based (National Lightning Detection Network [NLDN]) and satellite based (Geostationary Lightning Mapper [GLM]) sensors. A statistical analysis of these TLE properties as well as a discussion about the implications these measurements have on the hunt for TLEs both in current space based observational platforms such as the Atmosphere-Space Interaction Monitor (ASIM), International Space Station Lightning Imaging Sensor (ISS-LIS), and GLM or legacy satellite instruments such as the Lightning Imaging Sensor (LIS) on the Tropical Rainfall Measuring Mission (TRMM) satellite will be presented.

T. Daniel Walker↗
NASA NTRS2024

Development of a Data Fusion Methodology for Lineload Aerodynamic Databases for a Launch Vehicle during Liftoff and Transition

The need for databases for the distributed loading on launch vehicles during the early portion of flight necessitates the use of expensive computational flows in regimes where wake effects dominate. While also being expensive, this is a regime that computational tools tend to historically have problems simulating accurately. To help tackle this problem, a method of data fusion to combine computational results to wind tunnel derived force and moment data is developed. Using this method, significant reduction in computational costs and increases in confidence of the final product is possible and has been used to generate several databases for the Space Launch System (SLS) at NASA. While the full details of database generation are not part of this work, the crucial method at its core is developed here. Two SLS geometries are used throughout the work to demonstrate the techniques. These are two of the larger geometries and represent both planned crewed missions to the Moon as well as potential cargo missions to deep space. The method uses principal component analysis (PCA) to generate a reduced ordered model (ROM) to help fill in the full parameter space. Other similar techniques are explored, but were not found to have a significant result on the predictions of the ROM. Because the full number of components are kept to generate the model, this lack of difference is expected. This method is then extended to ensure that predicted surfaces match trusted force and moment data derived from wind tunnel testing. This extension is done by setting up a constrained optimization problem in order to minimize the deviation from the surface resolved computational data while still integrating to the desired values. When generating the constrained optimization problem, a weighting factor to balance these competing needs is introduced. The work compares previously introduced weighting terms from similar work to the proposed terms and shows that the previously used terms do not have as desirable behavior in this flow regime. This method is then expanded by developing a technique to incorporate uncertainty quantification into the developed data fusion methodology. This expansion takes a two pronged approach. One examines transferring the uncertainties in the force and moment database and characterizes how those adjustments change the predicted lineloads. The second looks at model form error and looks how rebuilding the model using slightly different data changes the predictions. These two terms are then combined in order to create an uncertainty model that takes both effects into account. The limitations of the proposed methods is then discussed as well as possible techniques to address these shortcomings.

Launch Vehicles↗
NASA NTRSDate not supplied

NASA’s Comprehensive Databases for Materials Selection (MAPTIS) and Low-Gravity Experiments (PSI)

In the realm of advancing technological change the convergence of materials science and scientific inquiry stands as a testament to humanity’s insatiable curiosity. To assist in this endeavor the National Aeronautics and Space Administration (NASA) provides curated access to two unique databases. Physical Sciences Informatics (PSI) is an online database that houses completed physical science reduced-gravity experiments. Whereas Materials and Processes Technical Information System (MAPTIS) contains several other databases that relate to aerospace materials and processes. Equipped with curated access to these databased provided by the NASA scientists and engineers are furnished with invaluable resources needed to propel technological change.

PSI↗
NASA NTRSDate not supplied

Parahydrogen Properties Version 05 Database Release for NTP Applications

Consistent modeling assumptions across any large project are crucial to minimize errors between different approaches. Use of consistent material and fluid properties across a large project supports consistent interpretation and application within modeling and simulation results as well as their relevancy to operational systems. NASA’s Space Nuclear Propulsion program dedicates extensive resources towards establishing consistent and, to the extent possible, accurate property databases for its internal staff and all external partners. This work highlights the extensive research performed to modernize the fluid property database of hydrogen which is the leading propellant option for in-space nuclear propelled spacecraft. Specifically, the parahydrogen spin state is of interest since the propellant is stored in a near normal boiling point liquid state which results in it consisting almost entirely of the parahydrogen spin isomer. This database tool has taken recent NASA work and modernized it into a python-based package for easy usage across all modeling entities. The package allows users to provide temperature and pressure pairs along with their desired output properties to yield results accounting for both real-gas and equilibrium dissociation effects while also sharing the default thermodynamic reference state provided by the National Institute of Standards and Technology (NIST) Standard Database 23. The suite also includes advanced capabilities to increase usability, such as on-the-fly interpolation and multidimensional plotting.

Nuclear Thermal Propulsion↗
NASA NTRSDate not supplied

CONUS and Global Carbon Consumption Database for Wildland Fire

Fire plays a significant role on both national and global scales, profoundly impacting landscapes shaped by human activity as well as wildlands. Even though fire can be devastating, wildland fire is a natural and integral force on our landscapes. Fires can also serve to reduce fuels to mitigate wildfire risk and maintain healthy ecosystem functions. However, the smoke produced by fires, regardless of their size or purpose, can pose adverse effects on human health when inhaled downwind. Understanding the influence of smoke on air quality and human well-being necessitates the quantification of emissions that fires release into the atmosphere. In response to this need, we have developed a carbon consumption database for the Continental United States (CONUS) and are developing a global carbon consumption database, both of which are directly link to distinct fuels within various fire danger categories. Fuel Characteristic Classification System (FCCS) fuels are used to parameterize biomass, and consumption is broken down into five Fire Danger categories (Low, Moderate, High, Very High, Extreme), for both ‘new’ and ‘residual’ burning scenarios. Residual burned area is defined as burning in areas that have recently burned. We implemented the FCCS 30-meter CONUS fuelbed dataset during the 2019 Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) campaign to estimate daily carbon emissions. Our emissions estimates were rigorously compared against in-situ measurements of CO2, CO, and black carbon aerosols, revealing a robust agreement between the two datasets. The 300-meter global database builds upon the foundations of the Pettinari, M. Lucrecia (2015) Global Fuelbed database, a global fuel map with standardized FCCS biomass parameters. These products can serve as valuable tools when used in conjunction with burned area data to rapidly and accurately estimate carbon consumed and released into the atmosphere.

FCCS↗
DOE OSTI2011

A Components Database Design and Implementation for Accelerators and Detectors

Many accelerator and detector systems being fabricated for the PEP-II Accelerator and BABAR Detector needed configuration control and calibration measurements tracked for their components. Instead of building a database for each distinct system, a Components Database was designed and implemented that can encompass any type of component and any type of measurement. In this paper we describe this database design that is especially suited for the engineering and fabrication processes of the accelerator and detector environments where there are thousands of unique component types. We give examples of information stored in the Components Database, which includes accelerator configuration, calibration measurements, fabrication history, design specifications, inventory, etc. The World Wide Web interface is used to access the data, and templates are available for international collaborations to collect data off-line.

43 PARTICLE ACCELERATORS↗
DOE OSTI2011

Distributed Online Conditions Database of the BaBar Experiment

This paper presents CDB - The distributed Conditions Database of the BaBar Experiment. CDB is the second major iteration of the database deployed in BaBar for production use as of October 2002. It replaced the original version of the database used through the first three years of the data taking. The new design and its implementation aims to improve the performance and scalability of the original database and addresses the emerging challenges of the distributed data production and analysis system of the Experiment.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2011

Design and Implementation of the CEBAF Element Database

With inauguration of the CEBAF Element Database (CED) in Fall 2010, Jefferson Lab computer scientists have taken a first step toward the eventual goal of a model-driven accelerator. Once fully populated, the database will be the primary repository of information used for everything from generating lattice decks to booting front-end computers to building controls screens. A particular requirement influencing the CED design is that it must provide consistent access to not only present, but also future, and eventually past, configurations of the CEBAF accelerator. To accomplish this, an introspective database schema was designed that allows new elements, element types, and element properties to be defined on-the-fly without changing table structure. When used in conjunction with the Oracle Workspace Manager, it allows users to seamlessly query data from any time in the database history with the exact same tools as they use for querying the present configuration. Users can also check-out workspaces and use them as staging areas for upcoming machine configurations. All Access to the CED is through a well-documented API that is translated automatically from original C++ into native libraries for script languages such as perl, php, and TCL making access to the CED easy and ubiquitous. Notice: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. The U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce this manuscript for U.S. Government purposes.

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

Fleet-Wide Prognostic and Health Management Suite: Asset Fault Signature Database

Proactive online monitoring in the nuclear industry is being explored using the Electric Power Research Institute’s Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software. The FW-PHM Suite is a set of web-based diagnostic and prognostic tools and databases that serves as an integrated health monitoring architecture. The FW-PHM Suite has four main modules: (1) Diagnostic Advisor, (2) Asset Fault Signature (AFS) Database, (3) Remaining Useful Life Advisor, and (4) Remaining Useful Life Database. The paper focuses on the AFS Database of the FW-PHM Suite, which is used to catalog asset fault signatures. A fault signature is a structured representation of the information that an expert would use to first detect and then verify the occurrence of a specific type of fault. The fault signatures developed to assess the health status of generator step-up transformers are described in the paper. The developed fault signatures capture this knowledge and implement it in a standardized approach, thereby streamlining the diagnostic and prognostic process. This will support the automation of proactive online monitoring techniques in nuclear power plants to diagnose incipient faults, perform proactive maintenance, and estimate the remaining useful life of assets.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗