Search NASA⌕ Search

SEARCH · Search NASA

Results for “Design for reliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Laser data links for communication satellites

Laser data relays potentially offer continuous 1 Gb/sec bandwidths, drastically increasing low-altitude satellite data collection capacity over present store-and-dump techniques. Availability of the laser link as a reliable alternative, operating within conventional low-altitude communication subsystem weight and power allocations, will create customer pressure for adoption. Major communication relay system impacts are discussed including reliability, mechanical design, attitude control, on-board data handling, contamination control, and traffic-net management. Interface parameters which drive the fundamental relay satellite design concepts are discussed, and conditions requiring early quantitative analysis are identified.

Ohern, W. L.↗
NASA NTRS1975

SEPS solar array design and technology evaluation

The solar array system considered is composed of two wings. Each wing consists of a solar array blanket, a blanket launch storage container, an extension/retraction mast assembly, a blanket tensioning system, and an array electrical harness. A technology evaluation is performed to assess the applicable solar array state-of-the-art and to define the supporting effort necessary to achieve technology readiness for meeting the Solar Electric Propulsion Stage (SEPS) solar array design requirements. Details of mechanical design are discussed along with questions of electrical design, operational reliability advantages, and array assembly advantages.

Elms, R. V., Jr.↗
NASA NTRS1977

Unexpected dividends from level 16 automated substructuring

The automated multistage substructuring capability now available in NASTRAN level 16 is shown to provide a number of unexpected tools for use in both project planning and the structural design cycle. The payoffs in terms of improved design, more reliable results, and confidence are extra benefits added to the savings in cost and schedule that can be realized. To realize these advantages, some old stereotypical assumptions of what substructuring entails are must be challenged.

Field, E. I.↗
NASA NTRS1978

The Automated Array Assembly Task of the Low-cost Silicon Solar Array Project, Phase 2

An advanced process sequence for manufacturing high efficiency solar cells and modules in a cost-effective manner is discussed. Emphasis is on process simplicity and minimizing consumed materials. The process sequence incorporates texture etching, plasma processes for damage removal and patterning, ion implantation, low pressure silicon nitride deposition, and plated metal. A reliable module design is presented. Specific process step developments are given. A detailed cost analysis was performed to indicate future areas of fruitful cost reduction effort. Recommendations for advanced investigations are included.

Coleman, M. G.↗
NASA NTRS1980

Third generation design solar cell module LSA task 5, large scale production

A total of twelve (12) preproduction modules were constructed, tested, and delivered. A concept to the frame assembly was designed and proven to be quite reliable. This frame design, as well as the rest of the assembly, was designed with future high volume production and the use of automated equipment in mind.

Source record↗
NASA NTRS1981

Process characteristics and design methods for a 300 deg quad OP amp

The results of process characterization, circuit design, and reliability studies for the development of a quad OP amplifier intended for use up to 300 C are presented. A dielectrically isolated complementary vertical bipolar process was chosen to fabricate the amplifier in order to eliminate isolation leakage and the possibility of latch up. Characterization of NPN and PNP junctions showed them to be suitable for use up to 300 C. Interconnect reliability was predicted to be greater than four years mean time between failure. Parasitic MOS formation was eliminated by isolation of each device.

Beasom, J. D.↗
NASA NTRS1984

Space Systems Technology Conference, Costa Mesa, CA, June 5-7, 1984, Technical Papers

Space station technology is considered along with a shuttle tethered satellite system development program, the development of advanced orbital maintenance/servicing techniques for EVA applications, human systems interfaces for space stations, materials and structures for space applications, progress in space nuclear reactor power systems technology development with the aid of the SP-100 Program, and the design of reliable power systems for communications satellites. Attention is given to problems and concepts of space station guidance and control, spacecraft data management hardware state-of-the-art, progressive autonomy, and automation in teleoperation from a man-machine interface viewpoint. A space exploration outlook is provided, and the space power systems of the early 21st century are discussed.

Source record↗
NASA NTRS1983

Analytical redundancy management mechanization and flight data analysis for the F-8 digital fly-by-wire aircraft flight control sensors

The details are presented of an onboard digital computer algorithm designed to reliably detect and isolate the first failure in a duplex set of flight control sensors aboard the NASA F-8 digital fly-by-wire aircraft. The algorithm's successful flight test program is summarized, and specific examples are presented of algorithm behavior in response to software-induced signal faults, both with and without aircraft parameter modeling errors.

Deckert, J. C.↗
NASA NTRS1986

Fatigue Criterion for System Design

Report discusses principles of structural-life prediction. Generalized methodology developed for structural life prediction, design, and reliability, based upon fatigue criterion. Approach incorporates computed life of elemental stress volumes of complex machine elements to predict system life. Results of coupon fatigue testing incorporated into analysis, allowing for life prediction and component or structural renewal rates, with reasonable statistical certainty.

Zeretsky, E. V.↗
NASA NTRS1988

Improved Traveling-Wave Tube

New space traveling-wave tube (TWT) provides coherent source of 75 watts of continuous-wave power output over bandwidth of 5 GHz at frequency of 65 GHz. Coupled-cavity TWT provides 50 dB of saturated gain. Includes thermionic emitter, M-type dispenser cathode providing high-power electron beam. Beam focused by permanent magnets through center of radio-frequency cavity structure. Designed for reliable operation for 10 years, and overall efficiency of 35 percent minimizes prime power input and dissipation of heat.

Rousseau, Art↗
NASA NTRS1988

Asymptotic modal analysis and statistical energy analysis

Statistical Energy Analysis (SEA) is defined by considering the asymptotic limit of Classical Modal Analysis, an approach called Asymptotic Modal Analysis (AMA). The general approach is described for both structural and acoustical systems. The theoretical foundation is presented for structural systems, and experimental verification is presented for a structural plate responding to a random force. Work accomplished subsequent to the grant initiation focusses on the acoustic response of an interior cavity (i.e., an aircraft or spacecraft fuselage) with a portion of the wall vibrating in a large number of structural modes. First results were presented at the ASME Winter Annual Meeting in December, 1987, and accepted for publication in the Journal of Vibration, Acoustics, Stress and Reliability in Design. It is shown that asymptotically as the number of acoustic modes excited becomes large, the pressure level in the cavity becomes uniform except at the cavity boundaries. However, the mean square pressure at the cavity corner, edge and wall is, respectively, 8, 4, and 2 times the value in the cavity interior. Also it is shown that when the portion of the wall which is vibrating is near a cavity corner or edge, the response is significantly higher.

Dowell, Earl H.↗
NASA NTRS1988

Electron collection by multiple objects within a single sheath

NASCAP/LEO, a computer program for the three-dimensional simulation of high-voltage surfaces with plasma, has been developed as a tool in the design of reliable, high-power spacecraft. NASCAP/LEO computes the potentials using analytic formulations for space charge, and only uses particle tracking to compute the current to the surfaces. Carruth's (1987) experimental results agree with the NASCAP/LEO simulations for the cases of both individual and overlapping sheaths.

Davis, V. A.↗
NASA NTRS1990

Space Shuttle main engine technology and enhancements

The SSME Project Office is taking several paths to meet future needs for the Shuttle system. The producibility program focuses on manufacturing concerns. The product improvement program is attempting to address and correct limitations. The Alternate Turbopump Development Program focuses on the development of a more advanced and reliable turbopump design, and the Technology Test Bed Program focuses on the demonstration and verification of new technology and initial concept verification. A program has been structured to meet the needs of the payload community and to look forward toward the incorporation of advanced fabrication concepts.

Smelser, Jerry W.↗
NASA NTRS1992

A brief overview of computational structures technology related activities at NASA Lewis Research Center

The presentation gives a partial overview of research and development underway in the Structures Division of LeRC, which collectively is referred to as the Computational Structures Technology Program. The activities in the program are diverse and encompass four major categories: (1) composite materials and structures; (2) probabilistic analysis and reliability; (3) design optimization and expert systems; and (4) computational methods and simulation. The approach of the program is comprehensive and entails exploration of fundamental theories of structural mechanics to accurately represent the complex physics governing engine structural performance, formulation, and implementation of computational techniques and integrated simulation strategies to provide accurate and efficient solutions of the governing theoretical models by exploiting the emerging advances in computer technology, and validation and verification through numerical and experimental tests to establish confidence and define the qualities and limitations of the resulting theoretical models and computational solutions. The program comprises both in-house and sponsored research activities. The remainder of the presentation provides a sample of activities to illustrate the breadth and depth of the program and to demonstrate the accomplishments and benefits that have resulted.

Hopkins, Dale A.↗