Search NASA⌕ Search

SEARCH · Search NASA

Results for “Discharge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

The temporal development of hollow cathode discharges

The temporal development of hollow cathode discharges was studied by means of electrical and optical diagnostic techniques. The results indicate that the discharge develops in two stages. The initial breakdown occurs along the longest straight path of the system, i.e., from the anode to the bottom of the cathode hole. This predischarge is confined to a narrow filament along the axis and carries a current of up to hundreds of milliamperes. The resulting distortion of the electric field in the cathode hole is assumed to cause a radial breakdown from the filamentary plasma on the axis to the edge of the cathode hole. After this second breakdown, an increase in current by more than three orders of magnitude is observed. Measurements with axial magnetic fields support the two-stage model.

Ngo, Mai T.↗

Examination of the discharge mechanism of Li/CF(x) cells: Comparison of the electrochemical reduction mechanisms of PTFE and (CF(x))n by lithium

Swelling of (CF(x))(sub n) electrodes in commercial Li/(CF(x))(sub n) cells presents a limiting factor in cell design optimization. Examination of cathodes from such cells, after discharge, reveals a relation between cell operating temperatures and cathode swelling. Attempts to explain the swelling using the prevailing model for the cathode reaction have failed. A more suitable reaction mechanism is proposed based on the observed behavior of (CF(x))(sub n) electrodes on discharge and a comparison of the reaction products of (CF(x))(sub n) and polytetra fluoroethylene (PTFE) with lithium amalgams. The proposed mechanism is in agreement with the experimental data found in the literature.

Baxam, Carl C.↗

Duration and rates of discharge: Maja Valles, Mars

The 1600 km-long Maja Valles outflow system of Mars consists of three major divisions including the upper valley on Lunae Planum, the canyon section across Xanthe Terra, and the lower valley across western Chryse Planitia. Although water released from the source in Juventae Chasma could reach the terminus of the present day valley system in central Chryse Planitia within 44 hours, the original outflow did not traverse the Martian surface in a direct path. It ponded along its course on northern Lunae Planum and near the western edge of Chryse Planitia significantly prolonging the lifetime of surface flow. Calculation of pond volumes and discharge rates through various parts of the channel system indicates that water flowed through this system for nearly a (terrestrial) year. Discharge rates from the various basins along the Maja channels and the maximum flow rates within the various channels are calculated. With this data, it is possible to place reasonable estimates of the minimum length of time required to drain the various impoundments and the duration of flow in various parts of the channel system. The results of these calculations are discussed.

Dehon, R. A.↗

Observations of VHF emissions from 50-mA electron beam injections in the ionosphere that are associated with beam-induced discharges

Results are presented of observations of strong VHF plasma waves with amplitudes in excess of 0.1 mV/m (Hz)1/2 associated with 50 mA electron beam injections in the ionosphere. Data from three swept-frequency receivers carried on two daughter payloads are analyzed to determine the emission spectra of the electron beam for various energies and currents. These results were obtained from the rocket-borne experiment SCEX 3, NASA flight 39.002 UE, launched February 1, 1990. The accelerator payload also carried photometers, which measured luminosity at wavelengths of 391.4 and 380.5 nm. Several times during electron gun activity the measured luminosity increased much faster than proportional to the beam current. This nonlinear increase is evidence that a discharge is occurring in the vicinity of the accelerator payload. It is inferred from the uniform distribution of the luminosity around the accelerator payload that the observed discharge extends significantly outside the beam cylinder.

Goerke, R. T.↗

Cloud-to-stratosphere lightning discharges - A radio emission model

Recent observations of rare cloud-to-stratospheric lightning discharges suggest the events are inherently 'slow-rising', with the emitted energy reaching peak values in about 10 milliseconds. Applying a dipole radiation model, it is demonstrated that the emitted radio wave energy from such slow-rising events is strongest below about 50 Hz, and possesses a significant rolloff at higher frequencies. In the analysis, various current distributions are considered in order to determine the effect on the radio spectrum. Near 10 kHz, the emission from cloud-to-stratospheric lightning is significantly reduced as compared to the typical cloud-to-ground return stroke, with amplitudes as much as 50 dB lower. This result may explain the lack of detection of VLF signals from recently observed long-lasting discharge events.

Farrell, W. M.↗

Effects of a lightning discharge detected by the DE 2 satellite over Hurricane Debbie

The satellite observation of a large, about 40-mV/m, transient electric field disturbance over Hurricane Debbie in September 1982 is reported. The electric field event is viewed as a spheric disturbance from a lightning discharge in the active weather system located beneath the satellite. To elucidate this observation of upward moving electrons in the ionosphere associated with a lightning event, several mechanisms for electron acceleration by electric field with components, E(parallel), along the magnetic field are compared. 'Runaway' electrons were accelerated in about 1 ms by a downward directed E(parallel) pulse of about 1 V/m magnitude. Such fields can result from rapidly exposed, negative space charges near the tops of clouds during positive cloud-to-ground discharges. HF frequency Fourier components of the E(parallel) pulse must propagate through the low-conducting nighttime atmosphere to the ionosphere with little dissipation.

Burke, William J.↗

Duration and rates of discharge - Maja Valles, Mars

The 1600 km-long Maja Valles outflow system of Mars consists of three major divisions including the upper valley on Lunae Planum, the canyon section across Xanthe Terra, and the lower valley across western Chryse Planitia. Although water released from the source in Juventae Chasma could reach the terminus of the present day valley system in central Chryse Planitia within 44 hours, the original outflow did not traverse the Martian surface in a direct path. It ponded along its course on northern Lunae Planum and near the western edge of Chryse Planitia significantly prolonging the lifetime of surface flow. Calculation of pond volumes and discharge rates through various parts of the channel system indicates that water flowed through this system for nearly a (terrestrial) year. Discharge rates from the various basins along the Maja channels and the maximum flow rates within the various channels are calculated. With this data, it is possible to place reasonable estimates of the minimum length of time required to drain the various impoundments and the duration of flow in various parts of the channel system. The results of these calculations are discussed.

De Hon, R. A.↗

Lightning Discharges to Aircraft and Associated Meteorological Conditions

A summary is given of information on atmospheric electrical discharges to aircraft and associated meteorological conditions. Information is given that is designed to give a fairly comprehensive view of the underlying principles of meteorology and atmospheric electricity. Of special interest to pilots are lists of procedures of flight conduct and aircraft maintenance recommended foe avoiding or minimizing the hazards of disruptive electrical discharges and other severe conditions near thunderstorms.

MEDICAL PROBLEMS OF FLIGHT - LIGHTNING↗

Effect of the Reservoir Volume on the Discharge Pressures in the Injection System of the N.A.C.A. Spray Photography Equipment

Tests were made to determine the effect of the reservoir volume on the discharge pressures in the injection system of the N.A.C.A. spray photography equipment. The data obtained are applicable to the design of a common rail fuel-injection system. The data show that an injection system of the type described can be designed so that not more than full load fuel quantity can be injected into the engine cylinders, and so that the fuel spray characteristics remain constant over a large range of engine speeds. Formulas are presented for computing the volume of the reservoir and the diameter of the discharge orifice.

Rothrock, A M↗

Experimental Investigation of Flow in an Annular Cascade of Turbine Nozzle Blades of Constant Discharge Angle

The experimental performance of turbine nozzle blades designed for a constant discharge angle was investigated at discharge hub Mach numbers of 1.18, 1.31, and 1.41. Flow characteristics are presented in terms of energy losses, angle gradients, and secondary flow effects. Blade efficiency decreased from 0.983 to 0.978 with increasing Mach number in the range investigated while angle variations in the loss regions became very large, indicating poorer blade performance than efficiency implies.

BOUNDARY LAYER CHARACTERISITCS-INTERNAL AERODYNAMI↗

Coefficients of discharge of fuel-injection nozzles for compression-ignition engines

This report presents the results of an investigation to determine the coefficients of discharge of nozzles with small, round orifices of the size used with high-speed compression-ignition engines. The injection pressures and chamber back pressures employed were comparable to those existing in compression-ignition engines during injection. The construction of the nozzles was varied to determine the effect of the nozzle design on the coefficient. Tests were also made with nozzles assembled in an automatic injection valve, both with a plain and with a helically grooved stem. It was found that a smooth passage before the orifice is requisite for high flow efficiency. A beveled leading edge before the orifice gave a higher coefficient of discharge than a rounded edge. The results with the nozzles assembled in an automatic injection valve having a plain stem duplicated those with the nozzles assembled at the end of a straight tube of constant diameter. Lower coefficients were obtained with the nozzles assembled in an injection valve having a helically grooved stem. When the coefficients of nozzles of any one geometrical shape were plotted against values of corresponding Reynold's numbers for the orifice diameters and rates of flow tested, it was found that experimental points were distributed along a single curve.

Gelalles, A G↗

Rates of fuel discharge as affected by the design of fuel-injection systems for internal-combustion engines

Using the method of weighing fuel collected in a receiver during a definite interval of the injection period, rates of discharge were determined, and the effects noted, when various changes were made in a fuel-injection system. The injection system consisted primarily of a by-pass controlled fuel pump and an automatic injection valve. The variables of the system studied were the pump speed, pump-throttle setting, discharge-orifice diameter, injection-valve opening and closing pressures, and injection-tube length and diameter.

Gelalles, A G↗

Use of charts for flow discharge calculations

Various problems in connection with engine design involve flow-discharge calculations which are rendered difficult both on account of the large number of external variables that enter into the computation - i.e., changes in discharge area during the process, change in volume of the cylinder, pressure, etc., and changes in the thermal constants themselves of the flow medium. A fairly accurate solution that does not involve an excessive amount of labor can be obtained only through the extensive use of i-s tables. In the present report, a solution is offered in the form of a different method making use of the I-S table of Lutz and Wolf.

Lutz, O↗

Constraints on the rate of discharge and duration of the Mangala Valles flood

Interest in Mangala Valles remains high within the planetary science community. This is justified because the survey mission images provide us with nearly complete coverage of the system at high resolution. Upcoming high resolution topography from the Mars Observer Laser Altimeter will enable the application of flood discharge models with an unprecedented level of detail. Previous work on the Mangala Valles problem has relied on the available low resolution topography. This has limited the ability of workers to constrain discharge calculations to only within several-order-of-magnitude estimates. Local determinations of channel depths via shadow length measurements and photoclinometric profiling are much more accurate, but can only be applied to steep slopes (and/or low sun elevations) in the case of shadow measurements, or across relatively short distances (to avoid changes in albedo along asymmetric photoclinometric profiles). We are taking stereo parallax measurements from medium resolution Viking Orbiter images, which provide a valuable intermediate check of the topography between those measurements made thus far and the upcoming Mars Observer data. The images used are from orbits 034A and 637A, and cover Mangala Valles from the source graben in Memnonia Fossae to the beginning of the bifurcated reach (at 9.5 deg lat., 151.5 deg lon.). These images are about 300 m/pixel and 250 m/pixel, respectively. Both sets of images were orthographically projected to 250 m/pixel. The separation angle between left-right pairs is approximately 52 degrees. This results in a vertical accuracy on the order of plus or minus 260 m. Though this is still somewhat coarse, the channel relief is clearly resolved. Preliminary profiles across Mangala Valles and the large topographic ridge to the east are shown on the following page. An east-west regional tilt that resulted from slight scaling differences in the digital data has been 'removed' by visually estimating a regional datum on the stereo pairs. North-south variations in scale have not yet been adjusted for, so the zero datum for each profile was simply taken to be the high water line of the channel itself. Our depth measurement for the source breach of about 750 m agrees reasonably well with values of 700-1000 m determined from shadow measurements.

Parker, T. J.↗

Discharge rates in Ma'adim Vallis, Mars

A digital elevation model (DEM) of a small part of the Martian channel Ma'adim Vallis was produced using the Frankot and Chellappa shape-from-shading algorithm. Software developed by the Dept. of Photogrammetry and Surveying at University College London uses this technique to extract slope information from the grey levels of image pixels. This technique was applied to a Viking Orbiter image of part of Ma'adim Vallis, and measurements of the channel depth and bed-slope of a channel incised into the floor of Ma'adim Vallis were made. These results were used to calculate order of magnitude estimates for discharge rates through the channel. The maximum values calculated are three orders of magnitude less than those for N. Kasei Vallis and are similar to values cited for the Missoula floods. However, when more realistic values of the water depth are used, discharge rates comparable with those for the Mississippi River result.

Thornhill, G. D.↗

Cycle life versus depth of discharge update on modeling studies

The topics are presented in viewgraph form and cycle life vs. depth of discharge data for the following are presented: data as of three years ago; Air Force/Crane-Fuhr-Smithrick; Ken Fuhr's Data; Air Force/Crane Data; Eagle-Pitcher Data; Steve Schiffer's Data; John Smithrick's Data; temperature effects; and E-P, Yardney, and Hughes 26% Data. Other topics covered include the following: LeRC cycling tests of Yardney Space Station Cells; general statements; general observations; two different models of cycle life vs. depth of discharge; and other degradation modes.

Thaller, Lawrence H.↗

Advanced high frequency partial discharge measuring system

This report explains the Advanced Partial Discharge Measuring System in ASU's High Voltage Laboratory and presents some of the results obtained using the setup. While in operation an insulation is subjected to wide ranging temperature and voltage stresses. Hence, it is necessary to study the effect of temperature on the behavior of partial discharges in an insulation. The setup described in this report can be used to test samples at temperatures ranging from -50 C to 200 C. The aim of conducting the tests described herein is to be able to predict the behavior of an insulation under different operating conditions in addition to being able to predict the possibility of failure.

Karady, George G.↗

Thermal and hydraulic considerations regarding the fate of water discharged by the outflow channels to the Martian northern plains

The identification of possible shorelines in the Martian northern plains suggests that the water discharged by the circum-Chryse outflow channels may have led to the formation of transient seas, or possibly even an ocean, covering as much as one-third of the planet. Speculations regarding the possible fate of this water have included local ponding and reinfiltration into the crust; freezing, sublimation, and eventual cold-trapping at higher latitudes; or the in situ survival of this now frozen water to the present day -- perhaps aided by burial beneath a protective cover of eolian sediment or lavas. Although neither cold-trapping at higher latitudes nor the subsequent freezing and burial of flood waters can be ruled out, thermal and hydraulic considerations effectively eliminate the possibility that any significant reassimilation of this water by local infiltration has occurred given climatic conditions resembling those of today. The arguments against the local infiltration of flood water into the northern plains are two-fold. First, given the climatic and geothermal conditions that are thought to have prevailed on Mars during the Late Hesperian (the period of peak outflow channel activity in the northern plains), the thickness of the cryosphere in Chryse Planitia is likely to have exceeded 1 km. A necessary precondition for the widespread occurrence of groundwater is that the thermodynamic sink represented by the cryosphere must already be saturated with ice. For this reason, the ice-saturated cryosphere acts as an impermeable barrier that effectively precludes the local resupply of subpermafrost groundwater by the infiltration of water discharged to the surface by catastraphic floods. Note that the problem of local infiltration is not significantly improved even if the cryosphere were initially dry, for as water attempts to infiltrate the cold, dry crust, it will quickly freeze, creating a seal that prevents any further infiltration from the ponded water above. The second argument against the local infiltration of flood water in the northern plains is based on hydraulic considerations. Repeated impacts have likely brecciated the Martian crust down to a depth of roughly 10 km. Given a value of permeability no greater than that inferred for the top 10 km of the Earth's crust (approximately 10(exp -2) darcies), a timescale as much as a billion years or more for the Martian groundwater system to achieve hydrostatic equilibrium, and the approximately 2-4 km elevation difference between the outflow channel source regions and the northern plains, the water confined beneath the frozen crust of the northern plains should have been under a significant hydraulic head. Thus, the existence of a hydraulic pathway between the ponded flood waters above the northern plains and the confined aquifer lying beneath it would not have led to the infiltration of flood water back into the crust, but rather the additional expulsion of groundwater onto the surface.

Clifford, S. M.↗