Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Resonant nature of intrinsic defect energy levels in PbTe revealed by infrared photoreflectance spectroscopy

Step-scan Fourier-transform infrared photoreflectance and modulated photoluminescence spectroscopy were used to characterize the optical transitions of the epitaxial PbTe thin film grown by molecular beam epitaxy on BaF{sub 2} (111) substrate in the vicinity of energy gap of lead telluride at 77 K. It is found that the intrinsic defect energy levels in the electronic structure are of resonant nature. The Te-vacancy energy level is located above the conduction band minimum by 29.1 meV. Another defect (V{sub X}) energy level situated below valance band maximum by 18.1 meV is also revealed. Whether it is associated with the Pb vacancy is still not clear. It might also be related to the misfit dislocations stemming from the lattice mismatch between PbTe and BaF{sub 2} substrate. The experimental results support the theory prediction (N. J. Parada and G. W. Pratt, Jr., Phys. Rev. Lett. 22, 180 (1969), N. J. Parada, Phys. Rev. B 3, 2042 (1971)) and are consistent with the reported Hall experimental results (G. Bauer, H. Burkhard, H. Heinrich, and A. Lopez-Otero, J. Appl. Phys. 47, 1721 (1976)).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-column scanning transmission electron microscopy analysis of misfit dislocations in GaSb/GaAs quantum dots

The structural quality of GaSb/GaAs quantum dots (QDs) has been analyzed at atomic scale by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy. In particular, we have studied the misfit dislocations that appear because of the high-lattice mismatch in the heterostructure. Our results have shown the formation of Lomer dislocations not only at the interface between the GaSb QDs and the GaAs substrate, but also at the interface with the GaAs capping layer, which is not a frequent observation. The analysis of these dislocations points to the existence of chains of dislocation loops around the QDs. The dislocation core of the observed defects has been characterized, showing that they are reconstructed Lomer dislocations, which have less distortion at the dislocation core in comparison to unreconstructed ones. As a result, strain measurements using geometric phase analysis show that these dislocations may not fully relax the strain due to the lattice mismatch in the GaSb QDs.

36 MATERIALS SCIENCE↗

Transport and strain relaxation in wurtzite InAs-GaAs core-shell heterowires

Indium-arsenide-gallium-arsenide (InAs-GaAs) core-shell, wurtzite nanowires have been grown on GaAs (001) substrates. The core-shell geometries (core radii 11 to 26 nm, shell thickness >2.5 nm) exceeded equilibrium critical values for strain relaxation via dislocations, apparent from transmission electron microscopy. Partial axial relaxation is detected in all nanowires increasing exponentially with size, while radial strain relaxation is >90%, but undetected in nanowires with both smaller core radii <16 nm and shell thicknesses <5 nm. Electrical measurements on individual core-shell nanowires show that the resulting dislocations are correlated with reduced electron field-effect mobility compared to bare InAs nanowires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flow of the current along metallic shunts in ohmic contacts to wide-gap III-V semiconductors

It is established experimentally that the contact metal-wide-gap semiconductor (GaAs, GaP, GaN) with the Schottky barrier transforms into the ohmic contact either in the process of continuous heating or in the process of holding at an elevated temperature before the formation of any recrystallized layers. In this case, resistance of the contact reduced to the unit area increases as the temperature increases for semiconductors with a high dislocation density (GaP, GaN). It is assumed that in such contacts, the current flows along the metallic shunts, which shorten the layer of space charge and are formed by metal atoms diffused along the dislocation lines or other imperfections of the semiconductor. In semiconductors with a low dislocation density (GaAs), resistance of the ohmic contact per unit area decreases with increasing the temperature as it was expected for the thermionic mechanism of current flowing.

36 MATERIALS SCIENCE↗

Multiscale simulation of thermomechanical processes in irradiated fission-reactor materials

The work funded from this project has been published in six papers, with two more in draft form, with submission planned for the near future. The papers are: (1) Kinetically-Evolving Irradiation-Induced Point-Defect Clusters in UO 2 by Molecular-Dynamics Simulation; (2) Kinetically driven point-defect clustering in irradiated MgO by molecular-dynamics simulation; (3) Grain-Boundary Source/Sink Behavior for Point Defect: An Atomistic Simulation Study; (4) Energetics of intrinsic point defects in uranium dioxide from electronic structure calculations; (5) Thermodynamics of fission products in UO 2 ±x; and (6) Atomistic study of grain boundary sink strength under prolonged electron irradiation. The other two pieces of work that are currently being written-up for publication are: (1) Effect of Pores and He Bubbles on the Thermal Transport Properties of UO 2 by Molecular Dynamics Simulation; and (2) Segregation of Ruthenium to Edge Dislocations in Uranium Dioxide.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Chirality and dislocation effects in single nanostructures probed by whispering gallery modes

Nanostructures such as nanoribbons and -wires are of interest as components for building integrated photonic systems, especially if their basic functionality as dielectric waveguides can be extended by chiroptical phenomena or modifications of their optoelectronic properties by extended defects, such as dislocations. However, conventional optical measurements typically require monodisperse (and chiral) ensembles, and identifying emerging chiral optical activity or dislocation effects in single nanostructures has remained an unmet challenge. Here we show that whispering gallery modes can probe chirality and dislocation effects in single nanowires. Wires of the van der Waals semiconductor germanium(II) sulfide (GeS), obtained by vapor–liquid–solid growth, invariably form as growth spirals around a single screw dislocation that gives rise to a chiral structure and can modify the electronic properties. Cathodoluminescence spectroscopy on single tapered GeS nanowires containing joined dislocated and defect-free segments, augmented by numerical simulations and ab-initio calculations, identifies chiral whispering gallery modes as well as a pronounced modulation of the electronic structure attributed to the screw dislocation. Further, our results establish chiral light-matter interactions and dislocation-induced electronic modifications in single nanostructures, paving the way for their application in multifunctional photonic architectures.

36 MATERIALS SCIENCE↗

Strain tensors in layer systems by precision ion channeling measurements

A powerful method for analyzing general strain states in layer systems is the measurement of changes in the ion channeling directions. We present a systematic derivation and compilation of the required relations between the strain induced angle changes and the components of the strain tensor for general crystalline layer systems of reduced symmetry compared to the basic (cubic) crystal. It is shown that, for the evaluation of channeling measurements, virtually all layers of interest may be described as being 'pseudo-orthorhombic'. The commonly assumed boundary conditions and the effects of surface misorientations on them are discussed. Asymmetric strain relaxation in layers of reduced symmetry is attributed to a restriction in the slip system of the dislocations inducing it. The results are applied to {l_brace}110{r_brace}SiGe/Si layer systems.

36 MATERIALS SCIENCE↗

Dislocation reduction via selective-area growth of InN accompanied by lateral growth by rf-plasma-assisted molecular-beam epitaxy

We investigated the selective-area growth (SAG) of InN by rf-plasma-assisted molecular-beam epitaxy using molybdenum (Mo)-mask-patterned sapphire (0001) substrates, which resulted in the formation of regularly arranged N-polar InN microcrystals. Transmission electron microscopy observation confirmed that the laterally grown side areas were nearly dislocation-free, although many threading dislocations (10{sup 9}-10{sup 10} cm{sup -2}) were generated at the InN/sapphire interface and propagated into the center of the InN microcrystals along the crystal c-axis. The laterally grown InN microcrystals exhibited narrow near-IR emission spectra with a peak photon energy of 0.627 eV and a linewidth of 39 meV at room temperature.

36 MATERIALS SCIENCE↗

Strain-driven growth of GaAs(111) quantum dots with low fine structure splitting

Symmetric quantum dots (QDs) on (111)-oriented surfaces are promising candidates for generating polarization-entangled photons due to their low excitonic fine structure splitting (FSS). However, (111) QDs are difficult to grow. The conventional use of compressive strain to drive QD self-assembly fails to form 3D nanostructures on (111) surfaces. Instead, we demonstrate that (111) QDs self-assemble under tensile strain by growing GaAs QDs on an InP(111)A substrate. Tensile GaAs self-assembly produces a low density of QDs with a symmetric triangular morphology. Coherent, tensile QDs are observed without dislocations, and the QDs luminescence at room temperature. Single QD measurements reveal low FSS with a median value of 7.6 μeV, due to the high symmetry of the (111) QDs. Tensile self-assembly thus offers a simple route to symmetric (111) QDs for entangled photon emitters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal stability of sputter deposited nanomosaic rutile TiO{sub 2}

A domain structure based on the rutile lattice with a large density of (1/2)<011>{l_brace}011{r_brace}-type stacking faults is found in sputter deposited TiO{sub 2} films [J. Vac. Sci. Technol. A 24, 2054 (2006)]. The thermal stability of nanomosaic rutile at moderate temperature is reported here. Films are annealed at 973 K for 0.25-15 h, characterized by x-ray diffraction. A Johnson-Mehl-Avrami-Kolmogorov analysis indicates impeded crystallite growth. A dislocation-locking mechanism is proposed for this behavior. Partial dislocations with (1/2)<011> Burgers vectors that bound the stacking faults glide on intersecting {l_brace}011{r_brace} slip planes and react to produce sessile stair rod dislocations. Without the high temperature required for dislocation climb, (1/2)<011>{l_brace}011{r_brace}-type faults inherent to nanomosaic rutile provide thermal stability against massive crystallite growth.

36 MATERIALS SCIENCE↗

In situ strain relaxation comparison between GaAsBi and GaInAs grown by molecular-beam epitaxy

The strain relaxation of GaAsBi is studied in order to determine both the maximum thickness before dislocations form for various misfits and the potential of GaAsBi for usage in the compositionally graded buffer of lattice-mismatched devices. Low-misfit GaAsBi epilayers are grown and compared with GaInAs, a well-studied material currently used in compositional grades. Relaxation behavior and dislocation energetics are compared using in situ wafer curvature. Samples are grown using molecular-beam epitaxy under similar conditions with misfit up to -0.81%. GaAsBi begins to relax at a lower thickness than GaInAs of the same mismatch. This leads to the majority of GaAsBi strain relaxation occurring with less material growth than comparable GaInAs. However, GaAsBi has greater residual strain than GaInAs after 2 {mu}m of growth. These results indicate that GaAsBi requires less elastic energy to form dislocations and more elastic energy to either encourage glide or multiply dislocations than GaInAs. GaAsBi shows less surface roughness than GaInAs for all samples, ruling out roughness as a source of dislocations and hindered glide in these alloys.

36 MATERIALS SCIENCE↗

Mechanisms of edge-dislocation formation in strained films of zinc blende and diamond cubic semiconductors epitaxially grown on (001)-oriented substrates

Ninety degree edge misfit dislocations (MDs) are 'sessile' dislocations; such dislocations, however, were found in large amounts in relaxed films. The commonly accepted formation mechanism of such dislocations is an interaction of two complementary 60 deg. dislocations with appropriate Burger's vectors, for example: a/2[101] + a/2 [011] = a/2 [110]. In the present study, four possible types of interaction were analyzed: (i) random meeting of two complementary MDs; (ii) crossing of two complementary 60 deg. MDs in the vicinity of film-substrate interface in systems grown on substrates misoriented from exact (001) orientation; (iii) formation of edge MDs during cross-slipping of a secondary MD; and (iv) induced nucleation of a secondary complementary 60 deg. MD. Examples of discussed interactions are given. Contrary to the widespread opinion that edge MDs in GeSi and InGaAs films grown by MBE on Si and GaAs substrates predominantly form under elastic strains greater than 2% and at the final stage of plastic relaxation, in the present study, we show that such dislocations may also form at an early stage of plastic relaxation in films with less-than-1% lattice misfit with substrate. A necessary condition for that is a sufficient amount of 60 deg. dislocations available in the system by the moment the strained film starts growing. Dislocations (60 deg. ) can be introduced into the system using a preliminarily grown, partially or fully relaxed buffer layer. This layer serves as a source of threading dislocations for the next growing layer that favor the formation of paired complementary MDs and their 'reagents', edge MDs, at the interface with growing film.

36 MATERIALS SCIENCE↗

Growth kinetics of AlN and GaN films grown by molecular beam epitaxy on R-plane sapphire substrates

This paper reports the growth by molecular beam epitaxy of AlN and GaN thin films on R-plane sapphire substrates. Contrary to previous findings that GaN grows with its (1120) A-plane parallel to the (1102) R-plane of sapphire, our results indicate that the crystallographic orientation of the III-nitride films is strongly dependent on the kinetic conditions of growth for the GaN or AlN buffer layers. Thus, group III-rich conditions for growth of either GaN or AlN buffers result in nitride films having (1120) planes parallel to the sapphire surface, and basal-plane stacking faults parallel to the growth direction. The growth of these buffers under N-rich conditions instead leads to nitride films with (1126) planes parallel to the sapphire surface, with inclined c-plane stacking faults that often terminate threading dislocations. Moreover, electron microscope observations indicate that slight miscut ({approx}0.5 deg. ) of the R-plane sapphire substrate almost completely suppresses the formation of twinning defects in the (1126) GaN films.

36 MATERIALS SCIENCE↗

Quantum Liquid Crystals in an Imbalanced Fermi Gas: Fluctuations and Fractional Vortices in Larkin-Ovchinnikov States

We develop a low-energy model of an unidirectional Larkin-Ovchinnikov (LO) state. Because the underlying rotational and translational symmetries are broken spontaneously, this gapless superfluid is a smectic liquid crystal, that exhibits fluctuations that are qualitatively stronger than in a conventional superfluid, thus requiring a fully nonlinear description of its Goldstone modes. Consequently, at nonzero temperature the LO superfluid is an algebraic phase even in 3D. It exhibits half-integer vortex-dislocation defects, whose unbinding leads to transitions to a superfluid nematic and other phases. In 2D at nonzero temperature, the LO state is always unstable to a nematic superfluid. We expect this superfluid liquid-crystal phenomenology to be realizable in imbalanced resonant Fermi gases trapped isotropically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chiral twisted van der Waals nanowires

Van der Waals heterostructures with small misalignment between adjacent layers (‘interlayer twist’) are of interest because of electronic structure and correlation phenomena (such as superconductivity) that are determined by both the atomic lattice and long-range superlattice potentials arising in interlayer moiré patterns. Previously, such twisted heterostructures have involved a single planar interface between layers isolated by exfoliation and micromechanically stacked in the desired relative orientation. Here we demonstrate a class of materials—van der Waals nanowires of layered crystals—in which a tunable interlayer twist evolves naturally during synthesis. In vapour–liquid–solid growth, nanowires of germanium(ii) sulfide, an anisotropic layered semiconductor, crystallize with layering along the wire axis and have a strong propensity for forming axial screw dislocations. Nanometre-resolved electron diffraction shows that Eshelby twist, induced by a torque on the ends of a cylindrical solid due to the stress field of an axial dislocation, causes a chiral structure in the van der Waals nanowires. The in-plane germanium sulfide crystal axes progressively rotate along the wire, and germanium sulfide layers in adjacent turns of the helix naturally form a moiré pattern because of their interlayer twist. The axial rotation and the twist are tunable by varying the nanowire thickness. Combined electron diffraction and cathodoluminescence spectroscopy show the correlation between the interlayer twist and locally excited light emission that is due to progressive changes in the lattice orientation and in the interlayer moiré registry along the nanowires. Furthermore, the findings demonstrate a step towards scalable fabrication of van der Waals structures with defined twist angles, in which interlayer moiré patterns are realized along a helical path on a nanowire instead of a planar interface.

36 MATERIALS SCIENCE↗

Statistical description of the motion of dislocation kinks in a random field of impurities adsorbed by a dislocation

A model has been proposed for describing the influence of impurities adsorbed by dislocation cores on the mobility of dislocation kinks in materials with a high crystalline relief (Peierls barriers). The delay time spectrum of kinks at statistical fluctuations of the impurity density has been calculated for a sufficiently high energy of interaction between impurities and dislocations when the migration potential is not reduced to a random Gaussian potential. It has been shown that fluctuations in the impurity distribution substantially change the character of the migration of dislocation kinks due to the slow decrease in the probability of long delay times. The dependences of the position of the boundary of the dynamic phase transition to a sublinear drift of kinks x {proportional_to} t{sup {delta}} ({delta} {sigma} 1) and the characteristics of the anomalous mobility on the physical parameters (stress, impurity concentration, experimental temperature, etc.) have been calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excess leakage currents in high-voltage 4H-SiC Schottky diodes

The high-voltage 4H-SiC Schottky diodes are fabricated with a nickel barrier and a guard system in the form of 'floating' planar p-n junctions. The analysis of I-V characteristics measured in a wide temperature range shows that the forward current is caused by thermionic emission; however, the current is 'excessive' in the reverse direction. It is assumed that the reverse current flows locally through the points of the penetrating-dislocation outcrop to the Ni-SiC interface. The shape of reverse I-V characteristics makes it possible to conclude that the electron transport is governed by the monopolar-injection mechanism (the space-charge limited current) with participation of capture traps.

36 MATERIALS SCIENCE↗

Morphology change from nanocrack into periodic pore array formed by femtosecond laser pulses

Defects inside single crystals are an important concern because they directly affect the physical or chemical properties of the material, especially in sapphire used as substrates for semiconductors. We have investigated the thermally activated transformations of nanometer-scale cracks and phase transitions inside sapphire by femtosecond laser irradiation and successive heat treatments. The nanocracks transformed into periodic arrays of pores and dislocations that aligned along the (1102) planes after heat treatments above 1300 deg. C. The amorphous phase at the focal point recovered into the initial single crystalline phase after the heat treatments. Our study provides useful information on the recovery behavior of nanometer-scale defects in a single crystal.

36 MATERIALS SCIENCE↗