Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRON DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Particle flows to shape and voltage surface discontinuities in the electron sheath surrounding a high voltage solar array in LEO

This paper discusses the numerical modeling of electron flows from the sheath surrounding high positively biased objects in LEO (Low Earth Orbit) to regions of voltage or shape discontinuity on the biased surfaces. The sheath equations are derived from the Two-fluid, Warm Plasma Model. An equipotential corner and a plane containing strips of alternating voltage bias are treated in two dimensions. A self-consistent field solution of the sheath equations is outlined and is pursued through one cycle. The electron density field is determined by numerical solution of Poisson's equation for the electrostatic potential in the sheath using the NASCAP-LEO relation between electrostatic potential and charge density. Electron flows are calculated numerically from the electron continuity equation. Magnetic field effects are not treated.

Metz, Roger N.↗

VLA observations of the coronal plasma

VLA observations at 20 cm wavelength specify the brightness temperature and magnetic structure of plasma constrained within coronal loops in solar active regions. Comparisons with simultaneous SMM observations at soft X-ray wavelengths lead to measurements of physical parameters like electron density, electron temperature and magnetic field strength. Such comparisons also indicate coronal loops can be detected at either radio X-ray wavelengths while remaining invisible in the other spectral domain and that the dominant radiation mechanisms can be thermal bremsstrahlung or thermal gyroresonance radiation. VLA observations at the longer 90 cm wavelength reveal the thermal emission of a hot transition sheath enveloping a cooler, underlying H alpha filament seen in absorption. The 20 cm VLA observations indicate that the precursor, impulsive and post-flare components of solar flares originate in spatially separated and resolved sources. The 90 cm VLA data indicate that time-correlated radio bursts can occur in active regions on opposite sides of the solar equator. These regions are apparently linked by large scale, trans-equatorial magnetic loops at least 2.6 x 10(exp 5) km (or 6 feet) long; these loops act as magnetic conduits for relativistic electrons moving at one-third the velocity of light.

Lang, Kenneth R.↗

Reevaluation of the O(+)(2P) reaction rate coefficients derived from Atmosphere Explorer C observations

O(+)(2P) is an important species for studies of the ionosphere and thermosphere: its emission at 7320 A can be used as a diagnostic of the thermospheric atomic oxygen density. Unfortunately, there are no laboratory measurements of the O and N2 reaction rates which are needed to determine the major sinks of (O+)(2p). We have recalculated the O and N2 reaction rates for O(+) (2P) using recent improvements in the solar EUV flux, cross sections, and photoelectron fluxes. For the standard solar EUV flux, the new N2 reaction rate of 3.4 +/- 1.5 x 10 exp -10 cu cm/s is close to the value obtained by Rusch et al. (1977), but the new O reaction rate of 4.0 +/- 1.9 x 10 exp -10 cu cm/sec is about 8 times larger. These new reaction rates are derived using neutral densities, electron density, and solar EUV fluxes measured by Atmosphere Explorer C in 1974 during solar minimum. The new theoretical emission rates are in good agreement with the data for the two orbits studied by Rusch et al.

Chang, T.↗

The Physical Conditions of a Lensed Star-Forming Galaxy at Z=1.7

We report rest-frame optical Keck/NIRSPEC spectroscopy of the brightest lensed galaxy yet discovered, RCSGA 032727-132609 at z=1.7037. From precise measurements of the nebular lines, we infer a number of physical properties: redshift ' extinction, star formation rate ' ionization parameter, electron density, electron temperature, oxygen abundance, and N/O, Ne/O, and Ar/O abundance ratios, The limit on [O III] 4363 A tightly constrains the oxygen abundance via the "direct" or Te method, for the first time in an average-metallicity galaxy at z approx.2. We compare this result to several standard "bright-line" O abundance diagnostics, thereby testing these empirically-calibrated diagnostics in situ. Finally, we explore the positions of lensed and unlensed galaxies in standard diagnostic diagrams, to explore the diversity of ionization conditions and mass-metallicity ratios at z=2.

Rigby, Jane↗

Physical Conditions of a Lensed Star-Forming Galaxy at Z=1.7

We report rest-frame optical Keck/NIRSPEC spectroscopy of the brightest lensed galaxy yet discovered, RCSGA 032727-132609 at z=1.7037. From precise measurements of the nebular lines, we infer a number of physical properties: redshift, extinction, star formation rate, ionization parameter, electron density, electron temperature, oxygen abundance, and N/O, Ne/O, and Ar/O abundance ratios. The limit on [O III] 4363 A tightly constrains the oxygen abundance via the "direct" or Tc method, for the first time in all metallicity galaxy at z approx.2. We compare this result to several standard "bright-line" O abundance diagnostics, thereby testing these empirically calibrated diagnostics in situ. Finally, we explore the positions of lensed and unlensed galaxies in standard diagnostic diagrams, and explore the diversity of ionization conditions and mass-metallicity ratios at z=2.

Rigby, Jane↗

Replacing the Polarizer Wheel with a Polarization Camera to Increase the Temporal Resolution and Reduce the Overall Complexity of a Solar Coronagraph

Experiments that require linearly polarized brightness measurements, traditionally have obtained three successive images through a linear polarizer that is rotated through three well-defined angles and the images are combined to get the linearly polarized brightness. This technique requires a mechanism to hold the linear polarizer in place and to precisely turn it through the three angles. Obviously, the temporal resolution is lost in such a scenario, since the three images that are used to derive the linearly polarized brightness are taken at three different times. Specifically, in a dynamic corona that is in constant reshaping of its structures, the linearly polarized brightness image produced in this manner may not yield true values all around the corona. In this regard, with the advent of the polarization camera, the linearly polarized brightness can be measured from a single image. This also eliminates the need for a linear polarizer and the associated rotator mechanisms and can contribute toward lower weight, size, power requirements, overall risk of the instrument, and most importantly, increase the temporal resolution. We evaluate the capabilities of a selected polarization camera and how these capabilities could be tested in a ground experiment conducted in conjunction with a total solar eclipse. The ground experiment requires the measurement of the linearly polarized brightness, also known as K-corona, in a corona that also contains unpolarized brightness, known as F-corona, in order to measure three important physical properties pertaining to coronal electrons, namely, the electron density, electron temperature, and the electron speed.

Reginald, Nelson L.↗

Metastable atom probe for measuring electron beam density profiles

Metastable atom probe was developed for measuring current density in electron beam as function of two arbitrary coordinates, with spatial resolution better than 0.5 mm. Probe shows effects of space charge, magnetic fields, and other factors which influence electron current density, but operates with such low beam densities that introduced perturbation is very small.

Lockhart, J. M.↗

Plasma waves associated with the AMPTE artificial comet

Numerous plasma wave effects were detected by the AMPTE/IRM spacecraft during the artificial comet experiment on December 27, 1984. As the barium ion cloud produced by the explosion expanded over the spacecraft, emissions at the electron plasma frequency and ion plasma frequency provided a determination of the local electron density. The electron density in the diamagnetic cavity produced by the ion cloud reached a peak of more than 5 x 10 to the 5th per cu cm, then decayed smoothly as the cloud expanded, varying approximately as t exp-2. As the cloud began to move due to interactions with the solar wind, a region of compressed plasma was encountered on the upstream side of the diamagnetic cavity. The peak electron density in the compression region was about 1.5 x 10 to the 4th per cu cm. Later, a very intense (140 mVolt/m) broadband burst of electrostatic noise was encountered on the sunward side of the compression region. This noise has characteristics very similar to noise observed in the earth's bow shock, and is believed to be a shocklike interaction produced by an ion beam-plasma instability between the nearly stationary barium ions and the streaming solar wind protons.

Gurnett, D. A.↗

Nighttime ionization by energetic particles at Wallops Island in the altitude region 120 to 200 km

Five Nike Apache rockets, each including an energetic particle spectrometer and an electron density-electron temperature experiment, have been launched from Wallops Island (L = 2.6) near midnight under varying geomagnetic conditions. On the most recent of these (5 January 1978) an additional spectrometer with a broom magnet, and a 391.4 nm photometer were flown. The data from this flight indicate that the energetic particle flux consists predominantly of protons, neutral hydrogen and possibly other energetic nuclei. The energy spectrum becomes much softer and the flux more intense with increasing Kp for 10-100 keV. The pitch angle distribution at 180 km is asymmetrical with a peak at 90 deg indicating that the majority of particles are near their mirroring altitude. Ionization rates are calculated based on the measured energy spectrum and mirror height distribution. The resulting ionization rate profile is found to be nearly constant with altitude in the region 120 to 200 km. The measured energetic particle flux and calculated ionization rate from the five flights are found to vary with magnetic activity (based on the Kp and Dst indexes) in the same way as the independently derived ionization rates deduced from the electron density profile.

Voss, H. D.↗

Fundamental design problems and properties of microwave plasma/ion sources

Design problems and procedures associated with microwave plasma sources are applied to cylindrical plasmas inside coaxial and cylindrical cavities. The experimental performance of these cavities is presented. Measurements of electron density and electron temperature for several inert gases, and different tube diameters and pressures are presented and compared with microwave and positive column discharge theories. Results show that plasmas with electron densities in excess of 10 to the 12th/cu cm are easily produced from microwave S band energy. The potential for these sources for ion engines is evaluated.

Root, J.↗

Measurements of a solar flare-generated shock wave at 13.1 R/0/

The first measurements of the structure of wind speed, electron density, and electron density fluctuations are reported for a shock wave propagating through the acceleration region of the solar wind. Radio scattering observations, consisting of spectral broadening, mean phase and amplitude scintillations, were made on August 18, 1979, 13.1 solar radii east of the sun near the ecliptic plane, using the 2.3 and 8.4 GHz radio signals of Voyager 1. The results show a shock wave speed of about 3,500 km/sec; which, when compared with average transit time speed to 1 AU, shows that substantial deceleration took place with outward propagation from the sun. This result is consistent with a blast wave.

Woo, R.↗

Simultaneous rocket and MST radar observation of an internal gravity wave breaking in the mesosphere

In June, 1983, the Structure and Atmospheric Turbulence Environment (STATE) rocket and Poker Flat Mesophere-Stratosphere-Troposphere radar campaign was conducted to measure the interaction between turbulence, electron density and electron density gradient that has produced unusually strong MST radar echoes from the summer mesosphere over Poker Flat, Alaska. Analysis or radar wind measurements and a concurrent wind and temperature profile obtained from a rocket probe carrying a three-axis accelerometer are given. The two data sets provide a fairly complete (and in some cases, redundant) picture of the breaking (or more correctly, the saturation) of a large-amplitude, low-frequency, long-wavelength internal gravity wave. The data show that small-scale turbulence and small-scale wave intensity is greatest at those altitudes where the large-scale wave-induced temperature lapse rate is most negative or most nearly unstable, but the wind shear due to the large-scale wave is a minimum. A brief review of linear gravity-wave theory is presented as an aid to the identification of the gravity-wave signature in the radar and rocket data. Analysis of the time and height cross sections of wind speed and turbulence intensity observed by the Poker Flat MST radar follows. Then, the vertical profile of temperature and winds measured by a rocket probe examined. Finally, the use of the independent data sets provided by the rocket and the radar are discussed and implications for theories of wave saturation are presented.

Smith, S. A.↗

Demonstration of Mars Crosslink Occultation Measurements for Future Small Spacecraft Constellations

Future planetary atmospheric profiling via radio occultations (RO) benefits significantly from increased received signal-to-noise ratio as well as geometrical coverage of links between two or more spacecraft in orbit around a target planet. These can be small spacecraft, possibly dedicated to quality radio-metrics with precision clock reference. Motivated by long-term research investigating the optimum SNR for the science performance, the optimum reference clock stability, the number and combination of wavelengths driving the number of transmitters and antennas, the optimum number and orbital spacecraft configuration, and design modifications to existing radio communication systems that would allow these new science objectives on future missions, three crosslink occultation experiments have been acquired between the Mars Odyssey and Mars Reconnaissance Orbiter spacecraft to probe the Martian atmosphere. While crosslink occultations between Earth orbiting satellites have long been used to profile the Earth’s atmosphere, this represents the first demonstration of crosslink occultation measurements at another planet. These measurements leverage the proximity link telecommunication payloads on each orbiter, which were designed to provide relay communication and navigation services to Mars landers and rovers. Analysis of the observed Doppler shift on each crosslink measurement reveals a clear signature of the Martian atmosphere, primarily the ionosphere. Inversion of the observed Doppler data yields vertical profiles of the Martian refractivity and electron density. The electron density profiles show the presence of two layers with peak densities and peak heights that are consistent with empirical models.

Asmar, Sami↗

Simultaneous wave and particle observations in the auroral kilometric radiation source region

Simultaneous observations from the topside sounder and the soft particle spectrometer onboard the ISIS 1 satellite reveal that very specific conditions on the local electron density and the energetic electron distributions must both occur in the auroral kilometric radiation (AKR) source region. Such regions are associated with inverted V electron precipitation and with depletions in the local electron density. The electron velocity distribution functions obtained near the inverted V peak were found to increase near several keV energy with increasing velocity as required for plasma instability. The electron density observed near the inverted V peak was too high to support AKR for three events investigated, however, and the AKR source was identified with the edge of the inverted V where the density was low (less than or equal to 30/cu cm) in each case. Whereas this density depletion can extend deep into the ionosphere (approximately 1500 km altitude), the severe depletion associated with the AKR density cavity is restricted to higher altitudes (greater than 2750 km for an event studied in detail).

Benson, R. F.↗

The density and thickness of quiescent prominences

The electron density was determined for a number of quiescent prominences at various positions from the Stark effect. It was found that the intensity ratio of Mg I emission lines to SrII lines is independent of the observed electron density in the range of ten to the 10.2 power to 10 to the 11.4 power cm-3. This contrasts with Landman's (1984) theoretical expectation that the ratio is proportional to the electron density. From the intensity of Balmer lines and the electron density, it is inferred that the true diameter of a thread in prominence of high electron density may be smaller than 0.2". The averaged total number density of hydrogen N sub H sub of was found to be 3-6 times 10 to the 11th power cm-3, leading to a total gas pressure P =0.6 dyn cm-2 and a total density of approx. 10 to the minus twelth power g cm-3. Landman's large value of N sub H approx. 6 times 10 to the 12th power and P sub g approx. 6 may have resulted either from the fact that he has treated very bright prominences and/or from the derivation of the high electron density for all prominences he studied.

Hirayama, Tadashi↗

Hemispheric differences in the morphology of the high latitude ionosphere measured at about 500 km

Ambient electron density measurements made by the radio frequency capacitance probe on Ariel 4 have been analyzed in order to study the structures present at about 500 km altitude at latitudes poleward of + or - 50 deg Lambda during the 1971 Northern Hemisphere winter (December solstice) and the 1972 Southern Hemisphere winter (June solstice); data obtained on 94 days centered on each solstice have been used. The general morphology of, and the extreme densities within, the midlatitude electron density trough, the polar cap depletions, and the electron density enhancements associated with the cusp-auroral zone were determined statistically. Analyses of data acquired during quiet magnetic conditions show that the Northern and Southern Hemisphere winter ionospheres were significantly different; in particular, the Southern Hemisphere densities were lower than those in the Northern Hemisphere. The maximum electron densities observed in the Northern Hemisphere occurred in a magnetic-local-time range symmetrical about the 02-14 MLT meridian, whereas in the Southern Hemisphere the maxima were symmetrical with respect to the midnight-noon magnetic meridian.

Tulunay, Y. K.↗