Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ellipsometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Nematic-like stable glasses without equilibrium liquid crystal phases

In this paper, we report the thermal and structural properties of glasses of posaconazole, a rod-like molecule, prepared using physical vapor deposition (PVD). PVD glasses of posaconazole can show substantial molecular orientation depending upon the choice of substrate temperature, T substrate , during deposition. Ellipsometry and IR measurements indicate that glasses prepared at T substrate very near the glass transition temperature (T g ) are highly ordered. For these posaconazole glasses, the orientation order parameter is similar to that observed in macroscopically aligned nematic liquid crystals, indicating that the molecules are mostly parallel to one another and perpendicular to the interface. To our knowledge, these are the most anisotropic glasses ever prepared by PVD from a molecule that does not form equilibrium liquid crystal phases. These results are consistent with a previously proposed mechanism in which molecular orientation in PVD glasses is inherited from the orientation present at the free surface of the equilibrium liquid. This mechanism suggests that molecular orientation at the surface of the equilibrium liquid of posaconazole is nematic-like. Posaconazole glasses can show very high kinetic stability; the isothermal transformation of a 400 nm glass into the supercooled liquid occurs via a propagating front that originates at the free surface and requires ~10 5 times the structural relaxation time of the liquid (τ α ). We also studied the kinetic stability of PVD glasses of itraconazole, which is a structurally similar molecule with equilibrium liquid crystal phases. Finally, while itraconazole glasses can be even more anisotropic than posaconazole glasses, they exhibit lower kinetic stability.

74 ATOMIC AND MOLECULAR PHYSICS↗

Liquid crystal mesophases beyond commensurate four-layer periodicity

For more than one decade, SMC* d4 , SmC* d3 , and SmC* A were the only three confirmed commensurate SmC* variant phases with periodicities less than or equal four layers. In 2006, employing ellipsometry and resonant X-ray diffraction (RXRD), our research team first discovered a new liquid crystal mesophase having a six-layer periodicity in one ternary mixture which includes one sulfur-containing compound. From our ellipsometric results, this phase showed antiferroelectric-like optical response. This novel discovery inspired renewed interest to search for liquid crystal mesophases with commensurate periodicities greater than four layers. Soon after, another mesophase having a six-layer structure and showing a ferrielectric-like dielectric response, instead, was uncovered by RXRD measurements on a different binary mixture which has one bromine-containing compound. Meanwhile mesophases having a 5-, 8-, 12- or 15-layer periodicity were reported. However, numerous questions remain to be addressed associated with these unusual reported phases. Theoretical models giving rise to mesophases with periodicities greater than four layers have been developed; but, to date, none of them have provided satisfactory explanations of all the physical phenomena related to the mesophases exhibiting a six-layer structure. Moreover, the question “what is the source of long-range interactions between liquid-like smectic layers, which are responsible for establishing mesophases with long periodicities and mean-field behavior of the smectic-A–smectic-C transition?” remains unanswered for more than three decades.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic Structure and Optical Properties of Cu 2 ZnGeSe 4 . First-Principles Calculations and Vacuum-Ultraviolet Spectroscopic Ellipsometric Studies

Cu 2 ZnGeSe 4 is of interest for the development of next-generation thin-film photovoltaic technologies. To understand its electronic structure and related fundamental optical properties, we perform first-principles calculations for three structural variations: kesterite, stannite, and primitive-mixed CuAu phases. The calculated data are compared with the room-temperature dielectric functionϵ=ϵ1+iϵ2 spectrum of polycrystalline Cu 2 ZnGeSe 4 determined by vacuum-ultraviolet spectroscopic ellipsometry in the photon-energy range of 0.7 to 9.0 eV. Ellipsometric data are modeled with the sum of eight Tauc-Lorentz oscillators, and the best-fit model yields the band-gap and Tauc-gap energies of 1.25 and 1.19 eV, respectively. A comparison of overall peak shapes and relative intensities between experimental spectra and the calculated ϵ data for three structural variations suggests that the sample may not have a pure (ordered) kesterite phase. We found that the complex refractive index N=n+ik, normal-incidence reflectivity R, and absorption coefficients α are calculated from the modeled ϵ spectrum, which are also compared with those of Cu 2 ZnSnSe 4 . The spectral features for Cu 2 ZnGeSe 4 appear to be weaker and broader than those for Cu 2 ZnSnSe 4 , which is possibly due to more structural imperfections presented in Cu 2 ZnGeSe 4 than Cu 2 ZnSnSe 4 .

14 SOLAR ENERGY↗

Optical properties of ferroelectric Bi4Ti3O12

We report optical properties of ferroelectric Bi{sub 4}Ti{sub 3}O{sub 12} based on spectroscopic ellipsometry and calculations with the recently developed density functional of Tran and Blaha. We find a close accord between the experiment and the calculated results with this functional, including the energy onset of optical transitions and the scale of the optical conductivity. The band gap is indirect, with a value of 2.9 eV, and an onset of direct optical transitions at 3.1 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adjusted Oscillator Strength Matching for Hybrid Magnetic and Electric Excitations in Dy3Fe5O12 Garnet

Far-infrared spectra of magnetodielectric Dy{sub 3}Fe{sub 5}O{sub 12} garnet were studied using a combination of transmittance, reflectivity, and rotating analyzer ellipsometry. In addition to purely dielectric and magnetic modes, we observed several hybrid modes with a mixed magnetic and electric dipole activity. Using 4 x 4 matrix formalism for materials with {mu}({omega}){ne}1, we modeled the experimental optical spectra and determined the far-infrared dielectric and magnetic permeability functions. The matching condition {mu}({omega}{sub h})S{sub e} = {var_epsilon}({omega}{sub h})S{sub m} for the oscillator strengths S{sub e(m)} explains the observed vanishing of certain hybrid modes at {omega}{sub h} in reflectivity.

36 MATERIALS SCIENCE↗

Spectroscopic Dielectric Tensor of Monoclinic Crystals: CdWO4

Generalized ellipsometry measurements have been made using twelve orientations of a monoclinic CdWO4 crystal, and a formalism for determining the dielectric tensor of this non cubic system in the laboratory reference frame has been developed. Using these measurements and the associated analytical methods presented here, it is shown that the four independent complex elements of the dielectric tensor can be determined at each wavelength. Below the band edge (~4 eV), the dielectric tensor is real, and therefore, it is possible to uniquely diagonalize this tensor and determine the birefringence for light passing along the unique b axis, but the orientation of the axes will be a function of wavelength. Above the band edge, unique diagonalization is not possible. The generalized ellipsometric spectra show some symmetry in the cross polarization coefficients. When the b axis is perpendicular to the sample surface, the condition ps = sp is valid. If the b axis is perpendicular to the plane of incidence, sp = ps = 0, and if the b axis is in the plane of incidence, parallel to the sample surface, then ps = sp 0. The combined experimental and analytical methods described here are applicable to the determination of the spectroscopic dielectric tensors of monoclinic crystals in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Enantiomeric Excess on the Phase Behavior of Antiferroelectric Liquid Crystals

Null transmission ellipsometry and resonant x-ray diffraction are employed to study the effect of enantiomeric excess (EE) on the phase behavior of antiferroelectric liquid crystal 10OTBBB1M7. Phase sequence, layer spacing, and pitch of the helical structures of the smectic-C*{sub {alpha}} and smectic-C* phases are studied as a function of temperature and EE. Upon reducing EE, a liquid-gas-type critical point of the smectic-C*{sub {alpha}} to smectic-C* transition is observed, as well as the disappearance of the smectic-C*{sub d4} and the smectic-C*{sub d3} phases. Results are analyzed in a mean-field model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of an Optical Library for Coevaporated CdSe x Te 1– x

The conversion efficiency of CdTe solar cells may be improved by bandgap engineering, i.e., changing the bandgap value through the addition of Se in the absorber. The Se alloying enables a short-circuit current density improvement, as it leads to a bandgap energy value decrease. Furthermore, it has been associated with increased minority carrier lifetimes, assuring high open-circuit voltage values. An Se gradient profile control can further optimize the solar cell performance. Thus, an optical model baseline of the CdSe x Te 1–x (CST) compound was developed. Spectroscopic ellipsometry measurements were conducted to accurately extract the optical constants of ten CST layers deposited through coevaporation with x varying from 0 to 1. Using the measured dielectric function spectra from the discrete CST layers with varying x, and considering the composition-induced shift in the critical point energies, an energy-shift model was employed to develop the accurate optical library for the CST compound for any x value to provide data for future modeling and optimization. Furthermore, the library accuracy was validated through optical simulations of the quantum efficiency of a graded CST solar cell using the finite-difference time-domain method by replicating the Se profile in the absorber layer measured through secondary ion mass spectrometry.

14 SOLAR ENERGY↗

Density Profiles in Sputtered Molybdenum Thin Films and Their Effects on Sodium Diffusion in Cu(InxGa1-x)Se2 Photovoltaics

Molybdenum (Mo) thin films were sputtered onto soda lime glass (SLG) substrates. The main variable in the deposition parameters, the argon (Ar) pressure p{sub Ar}, was varied in the range of 6-20 mTorr. Ex situ spectroscopic ellipsometry (SE) was performed to find out that the dielectric functions {var_epsilon} of the Mo films were strongly dependent on p{sub Ar}, indicating a consistent and significant decrease in the Mo film density {rho}{sub Mo} with increasing p{sub Ar}. This trend was confirmed by high-angle-annular-dark-field scanning transmission electron microscopy. {var_epsilon} of Mo was then found to be correlated with secondary ion mass spectroscopy profiles of Sodium (Na) in the Cu(In{sub x}Ga{sub 1-x})Se{sub 2} (CIGS) layer grown on top of Mo/SLG. Therefore, in situ optical diagnostics can be applied for process monitoring and optimization in the deposition of Mo for CIGS solar cells. Such capability is demonstrated with simulated optical transmission and reflectance of variously polarized incident light, using {var_epsilon} deduced from SE.

14 SOLAR ENERGY↗

Simplified Procedure for Estimating Epitaxy of La2Zr2O7-Buffered NiW RABITS Using XRD

Abstract A procedure is developed for assessing the epitaxy of La(2-x)Zr(2+x)O(7) (LZO) layers on NiW RABITS. Comparing XRD patterns (theta / 2-theta scans and 2D rocking curves) of LZO films of known thickness (ellipsometry or reflectometry measurements) with those of standard samples (100% epitaxial LZO film and an isotropic LZO pellet of known density), we estimate the epitaxial (EF), and polycrystalline (PF) fractions of LZO within the layer. The procedure was tested using MOD-LZO(100 nm)/NiW tape samples with varied from 3 to 90% (reproducibly prepared by varying the humidity of Ar-5%H2 gas during heat treatment). A qualitative agreement with RHEED and quantitative (within 10%) agreement with the EBSD results was shown. Correlation between EF and Jc in 600 nm thick YBCO layer deposited on MOD-LZO/NiW using thermal coevaporation enables us to impose the EF=80% margin on the quality of LZO layer for the particular conductor architecture.

36 MATERIALS SCIENCE↗

Ion beam deposition of tantalum pentoxide thin film at room temperature

Tantalum pentoxide (Ta{sub 2}O{sub 5}) thin films have been deposited by reactive ion beam sputtering at room temperature. The films have been characterized by scanning electron microscopy, atomic force microscopy, x-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), variable angle ellipsometry, and UV-VIS spectroscopy. The main parameter varied was the oxygen partial pressure. Stoichiometry is reached for p{sub O}{>=}3x10{sup -2} Pa; within the limit of XPS ({approx}1%) the films are free of contaminations. They are extremely smooth with a surface roughness of 0.14 nm only. From FTIR, it can be concluded that they are amorphous. For stoichiometric Ta{sub 2}O{sub 5} films, the refractive index at 532 nm is in the range from 2.05 to 2.2, while the extinction coefficient is below the detection limit of our ellipsometer. UV-VIS spectra show stoichiometric films to possess a high transmission in a wide wavelength range with an absorption edge below 300 nm.

36 MATERIALS SCIENCE↗

Self-limiting deposition of aluminum oxide thin films by pulsed plasma-enhanced chemical vapor deposition

Self-limiting deposition of aluminum oxide (Al{sub 2}O{sub 3}) thin films was accomplished by pulsed plasma-enhanced chemical vapor deposition using a continuous delivery of trimethyl aluminum (TMA) and O{sub 2}. Film characterization included spectroscopic ellipsometry and Fourier transform infrared (FTIR) spectroscopy. Deposition rates scaled with TMA exposure and could be controlled over a large range of 1-20 A/pulse. For fixed conditions, digital control over film thickness is demonstrated. Deposition rates initially decreased with substrate temperature before becoming constant for T{sub s}>100 deg. C. Higher growth rates at low temperature are attributed to the thermal reaction between H{sub 2}O, produced during the plasma on step, with TMA during the plasma off step. Gas-phase analysis confirms the coexistence of these species, and their degree of overlap is a strong function of the chamber wall temperature. With both the substrate and chamber wall temperature elevated, impurities related to carbon and hydroxyl groups are attenuated below the detection limit of FTIR.

36 MATERIALS SCIENCE↗

Role of chamber dimension in fluorocarbon based deposition and etching of SiO{sub 2} and its effects on gas and surface-phase chemistry

It is well understood that chamber geometry is an influential factor governing plasma processing of materials. Simple models suggest that a large fraction of this influence is due to changes in basic plasma properties, namely, density, temperature, and potential. However, while such factors do play an important role, they only partly describe the observed differences in process results. Therefore, to better elucidate the role of chamber geometry in this work, the authors explore the influence of plasma chemistry and its symbiotic effect on plasma processing by decoupling the plasma density, temperature, and potential from the plasma-surface (wall) interactions. Specifically, a plasma system is used with which the authors can vary the chamber dimension so as to vary the plasma-surface interaction directly. By varying chamber wall diameter, 20-66 cm, and source-platen distance, 4-6 cm, the etch behavior of SiO{sub 2} (or the deposition behavior of fluorocarbon polymer) and the resulting gas-phase chemistry change significantly. Results from in situ spectroscopic ellipsometry show significant differences in etch characteristics, with etch rates as high as 350 nm/min and as low as 75 nm/min for the same self-bias voltage. Fluorocarbon deposition rates are also highly dependent on chamber dimension and vary from no net deposition to deposition rates as high as 225 nm/min. Etch yields, however, remain unaffected by the chamber size variations. From Langmuir probe measurements, it is clear that chamber geometry results in significant shifts in plasma properties such as electron and ion densities. Indeed, such measurements show that on-wafer processes are limited at least in part by ion flux for high energy reactive ion etch. However, in situ multipass Fourier transform infrared spectroscopy reveals that the line-averaged COF{sub 2}, SiF{sub 4}, CF{sub 2}, and CF{sub 3} gas-phase densities are also dependent on chamber dimension at high self-bias voltage and also correlate well to the CF{sub x} overlayer stoichiometry under deposition conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of substrate temperatures on amorphous carbon nitride films prepared by reactive sputtering

Amorphous carbon nitride, a-CN{sub x}, films were deposited by reactive radio frequency magnetron sputtering of a graphite target in nitrogen gas. This kind of films could be used as novel electric and optical devices. The authors investigated effects of the substrate temperature up to 873 K on the films in this study. The films were characterized with x-ray photoelectron spectroscopy (XPS), ellipsometry, atomic force microscopy, and nanoindentation tests. XPS studies show that the decreasing tendency in the composition ratio of carbon to nitrogen in a-CN{sub x} films with the substrate temperature is observed; however, the bonding fraction of sp{sup 3}C-N increases depending on the substrate temperature. The nanoindentation tests reveal that the film hardness increases from 2 to 12 GPa as the substrate temperature increases from room temperature to 823 K. These results suggest that the film hardness is closely related to the bonding states between carbon and nitrogen.

36 MATERIALS SCIENCE↗

Silane injection in a high-density low-pressure plasma system and its influence on the deposition kinetics and material properties of SiO{sub 2}

High-rate, low temperature deposition is an essential requirement for industrial fabrication technology to be suitable for the deposition of optical and protective coatings. High-density, low-pressure plasmas have received significant attention for such applications due to their ability to create large and controllable ion fluxes onto the substrate. In this study, the high-rate deposition of silica films from a silane and oxygen gas mixture in a high-density plasma system based on a matrix distributed electron cyclotron resonance (MDECR) plasma source is investigated using directional jet injection of undiluted silane. The influence of process parameters such as the microwave power, radio frequency biasing of the substrate holder, and gas flows on the OH content of the oxide films is studied using phase-modulated spectroscopic ellipsometry (SE), Fourier transform infrared (FTIR) spectroscopy, and transmission measurements. The results of the measurements, taken at various points across the wafer, show a decrease in the thickness-normalized OH concentration in the areas of higher deposition rates. The corresponding gas phase composition is investigated using optical emission spectroscopy and compared to the FTIR, transmission and SE measurement results in order to validate our findings and ultimately optimize the deposition process. It is found that the primary silane flux onto the surface, which depends on the positioning of the jet injection point and gas flow rate, plays an important role not only on the deposition rate but also on the OH content of the films. The authors conclude that high-density plasma deposition systems such as the MDECR plasma enhanced chemical vapor deposition system cannot be considered as well mixed for gases with dissociation products that have high sticking coefficients, contrary to the accepted paradigm.

36 MATERIALS SCIENCE↗

Two-silane chemical vapor deposition treatment of polymer (nylon) and oxide surfaces that yields hydrophobic (and superhydrophobic), abrasion-resistant thin films

This article describes a two-silane, chemical vapor deposition (CVD) approach to creating hydrophobic (or even superhydrophobic), abrasion-resistant coatings on silicon oxide and polymer (nylon) substrates. This multistep approach employs only reagents delivered in the gas phase, as follows: (i) plasma cleaning/oxidation of the substrate, (ii) CVD of 3-isocyanatopropyltriethoxysilane, which is used as an adhesion promoter for the substrate, (iii) hydrolysis with water vapor, and (iv) CVD of (tridecafluoro-1,1,2,2-tetrahydrooctyl)trichlorosilane (the 'R{sub f}-Cl silane'). Surfaces are characterized by wetting, spectroscopic ellipsometry, x-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). This work has the following unique features. First, the authors explore an all gas phase deposition of a new silane coating that is scientifically interesting and technologically useful. Second, the authors show that the presence of an adhesion promoter in the process leads to thinner films that are more robust in abrasion testing. Third, results obtained using plasma/deposition equipment that is relatively inexpensive and/or available in most laboratories are compared to those obtained with a much more sophisticated, commercially available plasma/CVD system (the YES-1224P). The entire deposition process can be completed in only {approx}1 h using the industrial equipment (the 1224P). It is of significance that the polymer surfaces modified using the 1224P are superhydrophobic. Fourth, the thickness of the R{sub f}-Cl silane layer deposited by CVD correlates well with the thickness of the underlying spin coated nylon surface, suggesting that the nylon film acts as a reservoir of water for the hydrolysis and condensation of the R{sub f}-Cl silane.

36 MATERIALS SCIENCE↗

Growth and interface of HfO{sub 2} films on H-terminated Si from a TDMAH and H{sub 2}O atomic layer deposition process

HfO{sub 2} thin films have been deposited by an atomic layer deposition (ALD) process using alternating pulses of tetrakis(dimethyl)amino hafnium and H{sub 2}O precursors at a substrate temperature of 200-325 deg. C. The initial stage of film growth on OH- and H-terminated Si(100) surfaces is investigated using Rutherford backscattering spectrometry (RBS), x-ray photoelectron spectroscopy (XPS), and spectroscopic ellipsometry (SE). The authors observe an initial growth barrier on the Si-H surface for the first approximately four process cycles, where film growth is more efficient on the OH-terminated surface. Both starting surfaces require about 15 cycles to reach a steady growth rate per cycle, with the OH-terminated surface displaying a slightly higher growth rate of 2.7x10{sup 14} Hf/cm{sup 2} compared to 2.4x10{sup 14} Hf/cm{sup 2} for Si-H. Combining the RBS and SE data we conclude that the films deposited on the OH-terminated surface are denser than those deposited on the Si-H surface. Angle-resolved XPS measurements reveal the formation of an {approx}8 A interfacial layer after four ALD cycles on the H-terminated surface for a deposition temperature of 250 deg. C, and transmission electron microscopy verifies that the thickness of the interfacial layer does not change substantially between the 4th and the 25th process cycles. The interfacial layer appears to depend weakly on the deposition temperature from 200 to 325 deg. C, ranging from 6.9 to 8.4 A.

36 MATERIALS SCIENCE↗

Characterization of low-temperature silicon nitride films produced by inductively coupled plasma chemical vapor deposition

Silicon nitride films were synthesized at 170 deg. C by using inductively coupled plasma chemical vapor deposition under three microwave power conditions of 500, 800, and 1000 W. The chemical, physical and electrical properties of the deposited silicon nitride films were characterized by Fourier transform infrared, wet etching, atomic force microscopy, ellipsometry, J-V, and C-V measurements of metal-insulator-semiconductor. The microwave power for film deposition is found to play an important role at the films' properties. A high microwave power reduces the retention of hydrogen in a form of Si-H and N-H atomic bonds. The microwave power significantly affects the density of pin holes; the 800 W film has the lowest density of pin holes. In general, the low-temperature silicon nitride films possess better surface roughness than the conventional silicon nitride films produced at higher temperatures. The low-temperature silicon nitride films exhibit an abrupt breakdown, a characteristic of avalanche breakdown. The variation in breakdown strength is correlated with the change in pin-hole density, and the 800 W silicon nitride film possesses the highest breakdown strength. The microwave power has limited influences on leakage current and resistivity of the films. All the low-temperature silicon nitride films are characterized by high-density fixed charges and interface charge traps, of which both densities vary slightly with the microwave power for film deposition.

36 MATERIALS SCIENCE↗