Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geologic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Correction and Geological Analysis of Lunar 3.8 Cm Radar Data

Earth based radar observations of the Moon have been taken at many wavelengths during the last ten years -- at 3.8, 70 cm, and most recently, 7.5 cm. Radar returns have been collected in both polarized and depolarized form so that is possible to derive both topographic and local surface roughness from the data. Until recently, work with 3.8 cm radar data had consisted of qualitative correlation of photographic and thermal IR data with individual depolarized radar data frames (local surface roughness) at different wavelengths. These studies provided results which demonstrated that the relationships between surface roughness (measured by either thermal emission or radar reflectivity) at different wavelengths can be used as an index of a crater's state of degradation (age). However, systematic studies of craters, or other local terrain features, as well as regional or global studies of major terrains (involving a number of data frames), cannot be done until individual frames are calibrated, geometric distortion is removed, and corrected frames are mosaicked.

Clark, P. E.↗

Preliminary spectral and geologic analysis of Landsat-4 Thematic Mapper data, Wind River Basin area, Wyoming

A Landsat-4 Thematic Mapper (TM) image of the Wind River Basin area in Wyoming is currently under analysis for stratigraphic and structural mapping and for assessment of spectral and spatial characteristics using visible, near infrared, and short wavelength infrared bands. To estimate the equivalent Lambertian surface reflectance, TM radiance data were calibrated to remove atmospheric and instrumental effects. Reflectance measurements for homogeneous natural and cultural targets were acquired about one year after data acquisition. Calibration data obtained during the analysis were used to calculate new gains and offsets to improve scanner response for earth science applications. It is shown that the principal component images calculated from the TM data were the result of linear transformations of ground reflectance. In images prepared from this transform, the separation of spectral classes was independent of systematic atmospheric and instrumental factors. Several examples of the processed images are provided.

Conel, J. E.↗

Preliminary geologic analyses of SIR-B radar data for Hawaii

A number of distinct topographic and textural units were discerned on SIR-B radar images of the Kilauea/Kau Desert area. The SIR-B enhanced large-scale topographic features, such as the Kahuku Pali and the Koae Faults (both oriented towards the radar antenna), while it was unable to detect features facing away from the radar antenna such as the Hilina and Kaoiki Pali. Textural units which were identified on the SIR-B images include aa flows of various ages, and several pyroclastic units. The extreme surface roughness of aa flows produced high radar returns on both the 28 deg and 48 deg SIR-B data sets. In contrast, pahoehoe flows produced smooth, low return units which were difficult to distinguish from surrounding radar-dark materials. It is suggested that multilook direction data, acquired at steeper incidence angles during a reflight of SIR-B, may aid in the further identification of pahoehoe flows and subtle topographic features.

Gaddis, L. R.↗

Crustal geologic studies with Magsat and surface magnetic data

The contributions during the last quadrennium are discussed, which involved both Magsat and aeromagnetic data, including new techniques for interpreting this data, specific intended to understand the connection between magnetic anomalies and the magnetic mineralogy of their sources.

Mayhew, Michael A.↗

Assessment of Mars Exploration Rover landing site predictions.

Comprehensive analyses of remote sensing data during the three-year effort to select the Mars Exploration Rover landing sites at Gusev crater and at Meridiani Planum correctly predicted the atmospheric density profile during entry and descent and the safe and trafficable surfaces explored by the two rovers. The Gusev crater site was correctly predicted to be a low-relief surface that was less rocky than the Viking landing sites but comparably dusty. A dark, lowalbedo, flat plain composed of basaltic sand and haematite with very few rocks was expected and found at Meridiani Planum. These results argue that future efforts to select safe landing sites based on existing and acquired remote sensing data will be successful. In contrast, geological interpretations of the sites based on remote sensing data were less certain and less successful, which emphasizes the inherent ambiguities in understanding surface geology from remotely sensed data and the uncertainty in predicting exactly what materials will be available for study at a landing site.

Zurek, R. W.↗

Geologic mapping of Northern Atla Regio on Venus: Preliminary data

The Northern part of Atla Regio within the frame of C1-formate Magellan photo map 15N197 was mapped geologically at scale 1:8,000,000. This is a part of Russia's contribution into C1 geologic mapping efforts. The map is reproduced here being reduced about twice. The map shows that the Northern Atla area is predominantly a volcanic plain with numerous volcanic features: shield volcanoes, domes and hills with various morphology, corona-like constructions, radar bright and dark spots often with flow-like outlines. Relatively small areas of tessera occurred in the area are mainly semi-flooded with the plain material. Tesserae are considered to be the oldest terrains within the map sheet. There are many lineated terrains in the region. They are interpreted as the old, almost-buried tesserae (those with crossed lineaments) or partly buried ridge belts (those with parallel lineaments). These lineated terrains have an intermediate age between the young volcanic plains and the old tessera areas. Two prominent high volcanic shields are located within the region - Ozza Mons and Sapas Mona. The most prominent structure in Northern Atla is Ganis Chasma rift. The rift cuts volcanic plain and is considered to be under formation during approximately the same time with Ozza Mons shield. Ganis Chasma rift valley is highly fractured and bounded with fault scarps. Rift shoulder uplifts are typical for Ganis Chasma. There are few relatively young volcanic features inside the rift valley. The analysis of fracturing and rift valley geometry shows the rift originated due to 5-10 percent crustal extention followed by the crustal subsidence. The age sequence summary for the main terrain types in the region is (from older to younger ones): tesserae; lineated terrains with crossed lineaments; lineated terrains with parallel lineaments; volcanic plains; and prominent volcanic shields and Ganis Chasma rift valley. The geologic structure of Atla Regio as it appeared now with the Magellan high resolution images is very close to that of Beta Regio. Such conclusion coincide with the earlier ones based on the coarser data.

Nikishin, A. M.↗

Block rotations in the Rio Grande Rift, New Mexico

Paleomagnetic data from 13 sites of intrusive and extrusive rocks associated with the Oligocene Espinaso Formation around the Ortiz mountains, New Mexico, indicate mean magnetic directions of I = 42.1 deg and D = 337.8 deg, with a corresponding pole position of 67.9 deg N latitude and 142.3 deg E longitude. From comparison with the expected Oligocene direction, 17.8 + or - 11.3 deg of counterclockwise rotation is found, and the similar rotations for Oligocene and Pliocene age rocks suggests that motion has occurred in the past 5 m.y. Data support the previously suggested diamond-shaped crustal block extending from the San Luis basin southward to the Albuquerque basin bounded by well-defined recently active fault zones. The size of the block, the counterclockwise nature of rotation and the timing of motion are supported by geologic and structural data. The counterclockwise rotation of the block has resulted in uplift at the acute ends of the block and subsidence at the obtuse ends, and the driving mechanism may be left slip along the rift.

Brown, L. L.↗

Lunar Crustal Magnetism: Correlations with Geology

With Lunar Prospector reflectometry data we now have sufficient surface coverage to allow detailed comparisons between crustal magnetism and geology. We find substantial evidence that lunar magnetism is dominated by the effects of impact processes. Additional information is contained in the original extended abstract.

Halekas, J. S.↗

Geologic and mineral and water resources investigations in western Colorado using ERTS-1 data

The author has identified the following significant results. Geologic interpretation of ERTS-1 imagery is dependent on recognition of the distribution, continuity, trend, and geometry of key surface features. In the examination of ERTS-1 imagery, lithology must be interpreted largely from the geomorphic expression of the terrain. ERTS-1 imagery is extremely useful in detecting local structures. Most mapped structures are topographically-expressed. Consequently, ERTS-1 imagery acquired during mid-winter, when the solar illumination angle is low, provides the largest amount of structural information. Stereoscopic analyses of ERTS-1 images significantly aid geologic interpretation. Positive transparencies of ERTS-1 images (1:1,000,000) commonly contain more geologic information than can be adequately annotated during geologic interpretation.

Knepper, D. H., Jr.↗

Characterization of Pliocene and Miocene Formations in the Wilmington Graben, Offshore Los Angeles, for Large-Scale Geologic Storage of CO2

The project Characterization of Pliocene and Miocene Formations in the Wilmington Graben, Offshore Los Angeles, for Large-Scale Geologic Storage of CO2 is one of 9 site characterization projects that were implemented as part of ARRA (American Recovery and Reinvestment Act). Data from this project was used to improve resolution of data in NATCARB in the area of study. Data related to this study has already been incorporated in NATCARB Atlas. The Los Angeles Basin presents an opportunity for large-scale geologic CO2 storage. Due to its large population and historical and geologic setting as one of the most prolific oil and gas producing basins in the United States, the region is home to more than 12 major power plants and oil refineries that produce more than 5 million metric tons of fossil fuel-related CO2 emissions each year. GeoMechanics Technologies worked to characterize the Pliocene and Miocene sediments in the Wilmington Graben, offshore of Los Angeles, California, for high-volume CO2 storage. The Graben is located offshore of the Los Angeles and Long Beach Harbor area, making it accessible yet geologically isolated from the nearby Wilmington oilfield and onshore areas. These sediments span more than 5,000 feet of vertical interval with an estimated storage resource of more than 100 million metric tons of CO2. The project team analyzed and interpreted existing geologic data within the region, including detailed exploration well log data and 2-D and 3-D seismic data. New seismic lines were acquired to fill in current data gap areas and two new characterization wells were drilled and logged. This information was integrated with existing geologic interpretations for adjacent onshore areas to help characterize optimal areas for CO2 storage and seals to safely store CO2. Integrated 3-D geologic and geomechanical models for the Wilmington Graben were developed to simulate the fate and transport of injected CO2 in the subsurface and to assess risks. This project contributed to the understanding of injectivity, containment mechanisms, rate of dissolution and mineralization, and storage capacity of the Wilmington Graben and associated analogous basins. This effort also provided greater insight into the potential for offshore geologic formations to safely and permanently store CO2.

.las↗

The evolution of the moon

The thermal evolution of the moon as it can be defined by the available data and theoretical calculations is discussed. A wide assortment of geological, geochemical and geophysical data constrain both the present-day temperatures and the thermal history of the lunar interior. On the basis of these data, the moon is characterized as a differentiated body with a crust, a 1000-km-thick solid mantle (lithosphere) and an interior region (core) which may be partially molten. The presence of a crust indicates extensive melting and differentiation early in the lunar history. The ages of lunar samples define the chronology of igneous activity on the lunar surface. This covers a time span of about 1.5 billion years, from the origin to about 3.16 billion years ago. Most theoretical models require extensive melting early in the lunar history, and the outward differentiation of radioactive heat sources.

Toksoz, M. N.↗

Gravity survey of the Mount Toondina impact structure, South Australia

Gravity and seismic reflection data, together with geologic mapping, indicate that the Mount Toondina feature in South Australia is best interpreted as an eroded 4-km-diameter impact structure consisting of a ring structural depression surrounding a pronounced central uplift. Beds at the center of the structure within the central uplift have been raised as much as 200 m from depth and deformed by convergent flow. Seismic reflection data indicate that deformation extends to depths of only approximately = 800 m; at greater depths the reflectors are nearly flat lying, indicating little or no deformation. Gravity data show residual anomalies of +1.0 mGal coincident with the central uplift and a -0.5 Mgal low associated with the ring structural depression. Modeling of the gravity data indicates that relatively high-density material occurs within the central uplift, whereas the ring depression is filled with low-density material. The deformation at Mount Toondina is typical of a complex impact crater; the 4-km diameter is consistent with the expected threshold size for complex craters formed in weak to moderate strength sedimentary rocks.

Plescia, J. B.↗

Gravity Survey of the Mt. Toondina Impact Structure South Australia

Gravity and seismic reflection data, together with geologic mapping, indicate that the Mt. Toondina feature in South Australia is best interpreted as an eroded 4-km-diameter impact structure consisting of a ring structural depression surrounding a pronounced central uplift. Beds at the center of the structure within the central uplift have been raised as much as 200 m from depth and deformed by convergent flow. Seismic reflection data indicate that deformation extends to depths of only about 800 m; at greater depths the reflectors are nearly flat lying indicating little or no deformation. Gravity data show residual anomalies of +1.0 mGal coincident with the central uplift and a -0.5 mGal low associated with the ring structural depression. Modeling of the gravity data indicates that relatively high-density material occurs within the central uplift, whereas the ring depression is filled with low-density material. The deformation at Mt. Toondina is typical of a complex impact crater; the 4-km diameter is consistent with the expected threshold size for complex craters formed in weak to moderate strength sedimentary rocks.

Mt. Toondina Australia↗

Thematic mapper study of Alaskan ophiolites

LANDSAT Thematic Mapper (TM) images were used to produce improved geologic maps of the ophiolites of the Brooks Range, and to recognize regional-scale structures that might affect the spatial distribution of the ophiolites. From the TM data, significant information was obtained concerning the distribution of rock types and structures that could not easily be acquired with conventional geologic studies. The information obtained from the TM data, in combination with other geologic data, is being used to further the understanding of the tectonic evolution of the Brooks Range. Results of the work in the Maiyumerak Mountains area are used to illustrate the information being obtained with the LANDSAT TM data, and the way that the information is being integrated with other geologic data.

Bird, John M.↗

Geologic exploration: The contribution of LANDSAT-4 thematic mapper data

The major advantages of the TM data over that of MSS systems are increased spatial resolution and a greater number of narrow, strategically placed spectral bands. The 30 meter pixel size permits finer definition of ground features and improves reliability of the photointerpretation of geologic structure. The value of the spatial data increases relative to the value of the spectral data as soil and vegetation cover increase. In arid areas with good exposure, it is possible with careful digital processing and some inventive color compositing to produce enough spectral differentiation of rock types and thereby produce facsimiles of standard geologic maps with a minimum of field work or reference to existing maps. Hue-saturation value images are compared with geological maps of Death Valley, California, the Big Horn/Wind River Basin of Wyoming, the area around Cement, Oklahoma, and Detroit. False color composites of the Ontario region are also examined.

Everett, J. R.↗

Mapping in the Northern Martian Plains: A Renewed Survey of the Acidalia Mensae and Colles Regions

Acidalia Mensae is an oblong field of tilted mesas roughly trending east-west, with Acidalia Colles encompassing a regime of knobby terrain trending northeast from the center of the mesa region. Each province extends for approximately 300km in their respective directions in the heart of the vast plains of Acidalia Planitia. As part of efforts in the 1980s targeting evidences for a putative northern Martian paleo-ocean – manifesting itself most notably in geologic maps of quadrangles in East Acidalia – the Acidalia Mensae region was selected and divided into three quadrangles ranging across 26.8 deg W to 36 deg W and 47.5 deg N to 52.5 deg N. The region was then mapped at a 1:1,000,000 scale using Canvas on a Viking base map. We present an updated draft of this document converted into ArcMap, including a completed fourth quadrangle that covers the bulk of the Acidalia Colles region. Previously mapped units have been updated according to the availability of new higher-resolution data – particularly, Thermal Emission Imaging System (THEMIS) Day Infrared (IR) data as a base map, paired with supporting Context Camera (CTX) and High Resolution Stereo Camera (HRSC) HRSC stamps extracted from the Mars Orbital Data Explorer repository. Geologic units and contacts for the mesa and knob regimes, interstitial alluvial units and the surrounding plains are comprehensively presented alongside lower-level features such as levels (hypothesized to be shorelines) and pitted cones (putative pingos). The project was mapped in a transverse Mercator projection. Upon minor revision, the map is to be submitted to the USGS for publication.

Siwabessy, Andrew G.↗

A demonstration of ERTS-1 analog and digital techniques applied to strip mining in Maryland and West Virginia

The largest contour strip mining operations in western Maryland and West Virginia are located within the Georges Creek and the Upper Potomac Basins. These two coal basins lie within the Georges Creek (Wellersburg) syncline. The disturbed strip mine areas were delineated with the surrounding geological and vegetation features using ERTS-1 data in both analog (imagery) and digital form. The two digital systems used were: (1) the ERTS-Analysis system, a point-by-point digital analysis of spectral signatures based on known spectral values, and (2) the LARS Automatic Data Processing System. The digital techniques being developed will later be incorporated into a data base for land use planning. These two systems aided in efforts to determine the extent and state of strip mining in this region. Aircraft data, ground verification information, and geological field studies also aided in the application of ERTS-1 imagery to perform an integrated analysis that assessed the adverse effects of strip mining. The results indicated that ERTS can both monitor and map the extent of strip mining to determine immediately the acreage affected and indicate where future reclamation and revegetation may be necessary.

Anderson, A. T.↗