Search NASA⌕ Search

SEARCH · Search NASA

Results for “Heterostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Intrinsic magnetism in KTaO3 heterostructures

There has been intense recent interest in the two-dimensional electron gases (2DEGs) that form at the surfaces and interfaces of KTaO3 (KTO), with the discovery of superconductivity at temperatures significantly higher than those of similar 2DEGs based on SrTiO3 (STO). Like STO heterostructures, these KTO 2DEGs are formed by depositing an overlayer on top of appropriately prepared KTO surfaces. Some of these overlayers are magnetic, and the resulting 2DEGs show signatures of this magnetism, including hysteresis in the magnetoresistance (MR). Here, we show that KTO 2DEGs fabricated by depositing AlOx on top of KTO also show hysteretic MR, indicative of long-range magnetic order, even though the samples nominally contain no intrinsic magnetic elements. The hysteresis appears in both the transverse and longitudinal resistance in magnetic fields both perpendicular to and in the plane of the 2DEG. The hysteretic MR has different characteristic fields and shapes for surfaces of different crystal orientations and vanishes above a few Kelvin. Density functional theory (DFT) calculations indicate that the magnetism likely arises from Ta4+ local moments created in the presence of oxygen vacancies.

Physics↗
DOE OSTI2024

Ferroelectric Al1 − xBxN–GaN heterostructures

This report demonstrates Al0.93B0.7N thin films grown epitaxially on n-type GaN (0002)/c-plane sapphire substrates by reactive magnetron sputtering at 300 °C. At 200 nm film thickness, the Al0.93B0.07N layers exhibit partially relaxed substrate-induced epitaxial strain, a 0.16° wide (0002) rocking curve, in-plane crystallographic registry, and sub-nanometer surface roughness. Electrically, the stack shows robust hysteresis over three frequency decades, a remanent polarization of ∼125 μC/cm2, a strongly frequency dependent coercive field, highly uniform dc leakage currents, and endurance >106 field cycles. This report validates possibilities for ferroelectric nitride integration into conventional III-nitride heterostructures with high crystalline fidelity, high electrical resistivity, and persistent hysteresis. Such materials are synthesizable at thermal budgets and temperatures compatible with back-end-of-the-line boundary conditions.

Physics↗
DOE OSTI2025

Ferroelectric epitaxial Al(Sc/B)N/Mo/SiC heterostructures for high operating temperature devices

Advances in wurtzite nitride ferroelectrics of Al 1-x M x N (⁠ M = Sc or B) have led to novel capabilities, which must be integrated into existing fabrication processes. In the case of electronics operating > 200°C, a movement toward SiC-based platforms enables better performance over conventional Si, primarily due to the higher bandgap and lower intrinsic carrier concentration of SiC. Hence, the challenge is to develop a deposition process to integrate Al 1-x M x M x N ferroelectrics with elevated temperature-compatible materials for high temperature electronics such as the non-volatile memory component. We demonstrate epitaxial Al M N/Mo/SiC heterostructures, which provides both the crystalline and surface features that promote high-quality ferroelectric nitride film growth. Omega scans of the Mo (110) reflection exhibit a full width at half max of < 0.02° (40 arc sec) and the (0002) peak of the subsequently grown nitride film had a value of 1.1° for 160 nm thick Al 0.7 Sc 0.3 N and 1.3° for 400 nm thick Al 0.94 B 0.06 N. The crystallographic relationships found between the Al M N, Mo, and SiC layers indicate an advancement in sputter deposition of epitaxial films. Ferroelectric switching is also shown at 400 °C in both samples via polarization-electric field hysteresis and pulsed measurements, which exhibited P r values >100 μC cm -2 and E c between 3 and 4 M V cm -1 ⁠, despite a large presence of oxygen in both Al M N films ranging between 4 and 5 at.%, revealed by compositional analysis. This study demonstrates the process for synthesizing high-crystal quality ferroelectric nitride films, which can be used in extremely high temperature applications.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Enhanced second-harmonic generation from WS 2 /ReSe 2 heterostructure

Van der Waals stacking presents new opportunities for nonlinear optics with its remarkable tunability and scalability. However, the fundamental role of interlayer interactions in modifying the overall nonlinear optical susceptibilities remains elusive. In this work, we report anisotropic enhancement of second-harmonic generation (SHG) from a WS 2 /ReSe 2 heterobilayer, where the individual composite layers possess distinctive crystal phases. We investigate polarization-resolved response and twist-angle dependence in SHG and reveal that band alignment alone is insufficient to explain the observed anisotropy in the modified SHG response. Spectral shifts in excitonic features highlight band renormalization, supporting the role of hybridization between the two layers. Furthermore, SHG enhancement is highly anisotropic and can even be suppressed in some orientations, suggesting possible intensity-borrowing mechanisms within the heterostructure. Our work demonstrates the ability to tune both the intensity and polarization dependence of nonlinear optical responses with van der Waals stacking of distinctive crystal phases.

2D materials↗
DOE OSTI2023

Mapping the intrinsic photocurrent streamlines through micromagnetic heterostructure devices

Photocurrent in quantum materials is often collected at global contacts far away from the initial photoexcitation. This collection process is highly nonlocal. It involves an intricate spatial pattern of photocurrent flow (streamlines) away from its primary photoexcitation that depends sensitively on the configuration of current collecting contacts as well as the spatial nonuniformity and tensor structure of conductivity. Direct imaging to track photocurrent streamlines is challenging. Here, we demonstrate a microscopy method to image photocurrent streamlines through ultrathin heterostructure devices comprising platinum on yttrium iron garnet (YIG). We accomplish this by combining scanning photovoltage microscopy with a uniform rotating magnetic field. Here, local photocurrent is generated through a photo-Nernst type effect with its direction controlled by the external magnetic field. This enables the mapping of photocurrent streamlines in a variety of geometries that include conventional Hall bar-type devices, but also unconventional wing-shaped devices called electrofoils. In these, we find that photocurrent streamlines display contortion, compression, and expansion behavior depending on the shape and angle of attack of the electrofoil devices, much in the same way as tracers in a wind tunnel map the flow of air around an aerodynamic airfoil. This affords a powerful tool to visualize and characterize charge flow in optoelectronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Second-harmonic signature of chiral spin structures in W/Pt/Co heterostructures with tunable magnetic anisotropy

Abstract Second-harmonic Hall voltage (SHV) measurement method has been widely used to characterize the strengths of spin–orbit torques (SOTs) in heavy metal/ferromagnet thin films saturated in the single-domain regime. Here, we show that the magnetic anisotropy of a W/Pt/Co trilayer can be robustly tuned from in-plane to out-of-plane by varying W, Pt, or Co thicknesses. Moreover, in samples with easy-cone anisotropy, SHV measurements exhibit anomalous ‘humps’ in the multidomain regime accessed by applying a nearly out-of-plane external magnetic field. These hump features can only be explained as a result of the formation of Néel-type domain walls, efficiently driven by nevertheless small SOTs in this double heavy metal heterostructure with canceling spin Hall angles.

Physics↗
DOE OSTI2021

Formation of dislocations via misfit strain across interfaces in epitaxial BaTiO 3 and SrIrO 3 heterostructures

Abstract Dislocations often occur in thin films with large misfit strain as a result of strain energy accumulation and can drastically change the film properties. Here the structure and dislocations in oxide heterostructures with large misfit strain are investigated on atomic scale. When grown on SrTiO 3 (001), the dislocations in both the monolithic BaTiO 3 thin film and its superlattices with SrIrO 3 appear above a critical thickness around 6 nm. The edge component of the dislocations is seen in both cases with the Burgers vector of a ⟨100⟩. However, compared to monolithic BaTiO 3 , the dislocation density is slightly lower in BaTiO 3 /SrIrO 3 superlattices. In the superlattice, when considering the SrTiO 3 lattice constant as the reference, BaTiO 3 has a larger misfit strain comparing with SrIrO 3 . It is found that in both cases, the formation of dislocation is only affected by the critical thickness of the film with larger lattice misfit (BaTiO 3 ), regardless of the existence of a strong octahedral tilt/rotation mismatch at BaTiO 3 /SrIrO 3 interface. Our findings suggest that it is possible to control the position of dislocations, an important step toward defect engineering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Beyond the Anderson rule: importance of interfacial dipole and hybridization in van der Waals heterostructures

Vertical stacking of two-dimensional materials with weak van der Waals (vdW) interactions has laid the ground for breakthroughs in physics as well as in technological applications. Although vdW interactions dominate interlayer binding, interlayer electronic coupling may not be negligible and can lead to properties beyond the superposition of constituent monolayers. Here, studying heterobilayers of transition-metal dichalcogenides (MQ 2 ; M = Mo, Ni, Pt; Q = S, Se) by means of density functional theory calculations, we show two mechanisms that influence the band gaps of vdW heterostructures beyond the Anderson rule: (1) interfacial hybridization (mainly involving out-of-plane states, such as chalcogen p z -states), which leads to an upshift in the valence band maxima and accordingly a decrease in the band gap. (2) Formation of an interfacial electric dipole, resulting in an effective gap increase in type-II junctions. While the former is material specific, depending on the proximity of p z -states to each other and the valence band maxima, the latter can be generally described using a model based on the charge density decay outside the monolayers and the pristine band edge positions with respect to the vacuum level, irrespective of junction type.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Designing silicon carbide heterostructures for quantum information science: challenges and opportunities

Abstract Silicon carbide (SiC) can be synthesized in a number of different structural forms known as polytypes with a vast array of optically active point defects of interest for quantum information sciences. The ability to control and vary the polytypes during SiC synthesis may offer a powerful methodology for the formation of new material architectures that expand our ability to manipulate these defects, including extending coherence lifetimes and enhancing room temperature operation. Polytypic control during synthesis presents a significant challenge given the extreme conditions under which SiC is typically grown and the number of factors that can influence polytype selection. In situ monitoring of the synthesis process could significantly expand our ability to formulate novel polytype structures. In this perspective, we outline the state of the art and ongoing challenges for precision synthesis in SiC. We discuss available in situ x-ray characterization methods that will be instrumental in understanding the atomic scale growth of SiC and defect formation mechanisms. We highlight optimistic use cases for SiC heterostructures that will become possible with in situ polytypic control and end by discussing extended opportunities for integration of ultrahigh quality SiC materials with other semiconductor and quantum materials.

Harmon, K. J. (ORCID:0000000164277971)↗
DOE OSTI2025

Designing an exciton-condensate Josephson junction in quantum Hall heterostructures

The exciton condensate, a counterpart of superconductors realized in two-dimensional quantum Hall bilayer systems, has yet to demonstrate definitive experimental evidence of phase coherence such as the Josephson effect. This work introduces a gate-defined Josephson junction designed to exhibit the in-plane Josephson effect in van der Waals heterostructures. Unlike superconducting S-I-S junctions, the proposed device leverages a nearly layer-polarized gated region to mediate Josephson coupling via layer pseudospin variation. This coupling mechanism is tunable through gate voltages and magnetic fields, offering a high degree of experimental control. We demonstrate the feasibility of the design using realistic parameters, paving the way for direct observation of excitonic phase coherence in clean quantum Hall systems.

Wang, Tianle↗
DOE OSTI2026

Orbital-Dependent Coulomb Drag in Electron-Hole Bilayer Graphene Heterostructures

Here, we report Coulomb drag studies in an electron-hole bilayer graphene heterostructure in a magnetic field, where the orbital, spin, and valley degrees of freedom are lifted by the combined effects of exchange interaction, Zeeman energy, and a vertical displacement field. Our device enables the application of a large vertical displacement field across both layers. In addition to the well-established strong Coulomb drag between the Landau levels with an orbital quantum number 𝑁 = 0, we observe a Coulomb drag signal between the 𝑁 = 1 Landau levels under a suitable vertical displacement field. As the vertical displacement field increases further, the Coulomb drag signal between 𝑁 = 1 Landau levels weakens, and a Coulomb drag signal emerges between the 𝑁 = 0 and 𝑁 = 1 Landau levels. These findings suggest the important roles of the orbital index and the vertical displacement field in interlayer Coulomb interaction within the quantum Hall regime of coupled bilayer systems.

Landau levels↗
DOE OSTI2023

Large Spin-Orbit-Torque Efficiency and Room-Temperature Magnetization Switching in Sr Ir O 3 / Co-Fe-B Heterostructures

Spin-orbit-torque (SOT) switching is a potentially energy-efficient mechanism by which electrical current can control magnetization. We demonstrate room-temperature SOT switching in nanometer-thick Co⁢Fe⁢B/Sr⁢Ir⁢O 3 bilayers despite the amorphous nature of CoFeB and the interface. This behavior is attributed to the large spin Hall angle in Sr⁢Ir⁢O 3 as well as high spin transmission at the interface that contribute to the SOT efficiency ξ SOT . Our bilayers exhibit large ξ SOT of up to 1.4 and effective spin Hall conductivity of 0.9 ×10 5 (ℏ/2e)Ω –1 ⁢m –1 . In our bilayers, we observe unidirectional magnetoresistance and current-induced magnetization switching with a low critical current density of 1.38 ×10 10 A/m 2 at room temperature. Finally, our results are promising for heterostructures combining technologically relevant CoFeB with high spin-orbit-coupling oxides.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Thermoelectric transport of the half-filled lowest Landau level in a p -type Ge/SiGe heterostructure

In this work, we investigate the thermoelectric transport properties of the half-filled lowest Landau level v = 1 / 2 in a gated two-dimensional hole system in a strained Ge/SiGe heterostructure. The electron-diffusion dominated regime is achieved below 600 mK, where the diffusion thermopower S x x d at v = 1 / 2 shows a linear temperature dependence. In contrast, the diffusion-dominated Nernst signal S x y d of v = 1 / 2 is found to approach zero, which is independent of the measurement configuration (sweeping magnetic field at a fixed hole density or sweeping the density by a gate at a fixed magnetic field).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Axion insulator state in ferromagnetically ordered CrI 3 /Bi 2 Se 3 /MnBi 2 Se 4 heterostructures

Ferromagnetic (FM) axion insulators may greatly simplify experimental explorations of the topological magnetoelectric effect, as the FM ordering can be stable in a broad range of magnetic field. Through density functional theory calculations and four-band model studies, we find that two-dimensional van der Waals FM CrI 3 and MnBi 2 Se 4 overlayers induce opposite-sign exchange fields in the topological surface states of Bi 2 Se 3 film when they are ferromagnetically ordered. As a consequence, the CrI 3 /Bi 2 Se 3 /MnBi 2 Se 4 heterostructure is a robust FM axion insulator, according to surface-resolved Berry curvature calculations. Our work opens up opportunities for the design of materials with the topological magnetoelectric effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Twofold symmetry of proximity-induced superconductivity in Bi 2 Te 3 / Bi 2 Sr 2 CaCu 2 O 8 + δ heterostructures revealed by scanning tunneling microscopy

We observe proximity-induced superconductivity in in situ prepared heterostructures constructed by topological insulator Bi 2 Te 3 thin films and high-temperature cuprate superconductors Bi 2 Sr 2 CaCu 2 O 8+δ . The superconducting gap maximum is about 7.6 meV on the surface of Bi 2 Te 3 thin films with a thickness of two quintuple layers, and the gap value decreases with an increase in the film thickness. Moreover, the quasiparticle interference data show clear evidence of a twofold symmetric superconducting gap with gap minima along one pair of the principal crystalline axes of Bi 2 Te 3 . This gap form is consistent with the Δ 4y notation of the topological superconductivity proposed in such systems. Our results provide fruitful information on the possible topological superconductivity induced by the proximity effect in high-temperature superconducting cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Trapping interlayer excitons in van der Waals heterostructures by potential arrays

Transition metal dichalcogenide heterostructures can host interlayer excitons (IXs), which consist of electrons and holes spatially separated in different layers. IXs possess permanent dipoles and have proven to offer a wealth of novel physics. Here we develop a discrete, random-walk model which includes annihilation and repulsion interactions among IXs. Using this model, we simulate the trapping of IXs in traps of different depths, densities, and shapes. Our results show that dipole-dipole interactions play an important role in regulating IX trapping. The effects of dipole interactions can be mitigated with small, deep traps which are realizable with atomic defects and moire potentials.

2-dimensional systems↗
DOE OSTI2021

Van der Waals heterostructure Pt 2 HgSe 3 / CrI 3 for topological valleytronics

We identify a valley-polarized Chern insulator in a van der Waals heterostructure, monolayer Pt 2 HgSe 3 /monolayer CrI 3 , for potential applications with interplay between electric, magnetic, optical, and mechanical effects. The interlayer proximity magnetic coupling nearly closes the band gap of monolayer Pt 2 HgSe 3 , and the strong intralayer spin-orbit coupling further lifts the valley degeneracy by over 100 meV, leading to positive and negative band gaps at opposite valleys. In the valley with negative gap, the interfacial Rashba spin-orbit coupling opens a topological band gap of 17.8 meV, which is enlarged to 30.8 meV by adding a hexagonal boron nitride (h-BN) layer. We find large orbital magnetization in the Pt 2 HgSe 3 layer that is much larger than spin, which can induce a measurable optical Kerr effect. Additionally, the valley polarization and Chern number are coupled to the magnetic order of the nearest-neighbor CrI3 layer, which is switchable by electric, magnetic, and mechanical means in experiments. The presence of h-BN protects the topological phase, allowing the construction of superlattices with valley, spin, and layer degrees of freedom.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Observation of nonlinear planar Hall effect in magnetic-insulator–topological-insulator heterostructures

Interfacing topological insulators (TIs) with magnetic insulators (MIs) have been widely used to study the interaction between topological surface states and magnetism. Previous transport studies typically interpret the suppression of weak antilocalization or appearance of the anomalous Hall effect as signatures of the magnetic proximity effect (MPE) imposed to TIs. Here, in this work, we report the observation of the nonlinear planar Hall effect (NPHE) in Bi 2 ⁢Se 3 films grown on MI thulium and yttrium-iron-garnet (TmIG and YIG) substrates, which is an order of magnitude larger than that in Bi 2 ⁢Se 3 grown on nonmagnetic gadolinium-gallium-garnet (GGG) substrate. The nonlinear Hall resistance in TmIG/Bi 2 ⁢Se 3 depends linearly on the external magnetic field, while that in YIG/Bi 2 ⁢Se 3 exhibits an extra hysteresis loop around zero field. The magnitude of the NPHE is found to scale inversely with carrier density. We speculate that the observed NPHE is related to the MPE-induced exchange gap opening and out-of-plane spin textures in the TI surface states, which may be used as an alternative transport signature of the MPE in MI/TI heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗