SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Performance prediction of fixed wing leading edges radiative, ablative and active cooling thermal protection systems and system weights comparison for space shuttle entry mission
An investigation was conducted to determine the effects of two-position leading edge slats on the low speed aerodynamic characteristics of a swept wing twin-jet supersonic fighter airplane model at high angle of attack and various Reynolds numbers. The investigation was performed at a Mach number of 0.20 over a range of angle of attack from 19 deg to 90 deg and angles of slideslip from -10 deg to 30 deg and Reynolds numbers from 1.97 to 13.12 million per meter.
The paper investigates a two-dimensional oscillating cascade with a subsonic leading edge locus in a supersonic flow. The blades are assumed to be of small thickness and camber, and are undergoing small amplitude-harmonic oscillations. The problem is reduced to the solution of a functional integral equation, and an expression is given for the kernel function.
Experimental/theoretical correlations are presented which show that significant levels of leading edge thrust are possible at supersonic speeds for certain planforms which match the theoretical thrust distribution potential with the supporting airfoil geometry. The analytical process employed spanwise distribution of both it and/or that component of full theoretical thrust which acts as vortex lift. Significantly improved aerodynamic performance in the moderate supersonic speed regime is indicated.
A glycol-exuding porous leading edge ice protection system was tested. Results show that the system is very effective in preventing ice accretion (anti-ice mode) or removing ice from an airfoil. Minimum glycol flow rates required for anti-icing are a function of velocity, liquid water content in the air, ambient temperature, and droplet size. Large ice caps were removed in only a few minutes using anti-ice flow rates. It was found that the shed time is a function of the type of ice, size of the ice cap, angle of attack, and glycol flow rate. Wake survey measurements show that there is no significant drag penalty for the installation or operation of the system tested.
A heat shield for thermally insulating the leading edge of a wing of a spacecraft during ascent and reentry includes a plurality of rigid tiles. Each tile is formed with a pie-shaped element which interlocks with the complementarily-formed element of another tile. The combination of structure afforded by the pie-shaped elements substantially impedes hypersonic flow of any gases that might enter the gaps between tiles.
Boltzmann equation with BGK model as governing equation for sharp leading edge problem in supersonic flow
Finite difference solution for compressible turbulent boundary layer equations of swept slab with leading edge blowing
Effect of blade leading edge thickness on cavitation performance of helical inducer in hydrogen
A numerical method for the estimation of leading edge thrust for supersonic wings of arbitrary planform was developed and was programmed as an extension to an existing high speed digital computer method for prediction of wing pressure distributions. The accuracy of the method was assessed by comparison with linearized theory results for a series of flat delta wings. Application of the method to wings of arbitrary planform, both flat and cambered, is illustrated in several examples.
The applicability of existing theoretical models for predicting wing leading edge separated flow characteristics for high-lift supersonic flight was examined with regard to previous experimental force, pressure and flow visualization data. Correlations of data on uncambered delta wings revealed that the upper surface normal force and minimum pressure coefficients decreased nonlinearly with increasing angles of attack. The attainable vacuum pressure decreased with increasing Mach number, while the lower surface normal force increased nonlinearly with increasing speed. The LISTAR and VORCAM linear theory aerodynamic codes generated predictions for comparison with the data. LISTAR displayed better agreement with measured vortex strength and position and lifting characteristics than did VORCAM. The Euler code SWINT was ill-suited to calculating wing performance in separated flows at high lift and low supersonic speeds.
The aerodynamic characteristics of a highly swept planar delta wing employing conical leading edge flaps are numerically investigated, using a free vortex sheet method that is based on an advanced, three-dimensional inviscid flow panel method employing quadratic doublet distributions to represent the wing surface and the rolled-up vortex sheet and wake. Upward flap deflection shifts the negative pressure peak inboard of the basic wing and develops a significant suction pressure on the flap that then produces thrust component in the direction of flight; overall drag is thereby reduced.
The details of an experimental study of shock wave interference heating on a cylindrical leading edge representative of the cowl of a rectangular hypersonic engine inlet are presented. This Mach 8 study has provided the first detailed pressure and heat transfer rate distributions on a cylinder resulting from a two-dimensional shockwave interference pattern created by two incident oblique shock waves intersecting the cylinder bow shock wave. The peak heat transfer rate was 38 times the undisturbed flow stagnation point level and occurred when the two oblique shock waves coalesced prior to intersecting the cylinder bow shock wave. Development of pressure deflection diagrams identified a new interference pattern consisting of concomitant supersonic jets separated from each other by a shear layer and submerged in the subsonic region between the bow shock wave and body.
Aerodynamic force tests of a Clark Y wing equipped with "Maxwell" type leading-edge slots were conducted in the N.A.C.A. 7- by 10-foot tunnel to ascertain the aerodynamic characteristics, which involved the determination of the best slot-gap opening, the effects of slat width, and the effect of a trailing-edge flap. The Maxwell wing with a wide-chord slat (0.30 c(sub w)) and with a 0.211 c(sub w) split flap deflected 60 degrees had a C(sub L sub max) of 2.53 or about twice that of the plain wing. The wing with the wide slat also had, in general, improved aerodynamic characteristics over those of the Maxwell wing with slat, and had about the same aerodynamic characteristics as a Handley Page slotted wing with approximately the same size of slat.
High density-altitude operations of helicopters with advanced performance and maneuver capabilities have lead to fundamental research on active high-lift system concepts for rotor blades. The requirement for this type of system was to improve the sectional lift-to-drag ratio by alleviating dynamic stall on the retreating blade while simultaneously reducing the transonic drag rise of the advancing blade. Both measured and computational results showed that a Variable Droop Leading Edge (VDLE) airfoil is a viable concept for application to a rotor high-lift system. Results are presented for a series of 2D compressible dynamic stall wind tunnel tests with supporting CFD results for selected test cases. These measurements and computations show a dramatic decrease in the drag and pitching moment associated with severe dynamic stall when the VDLE concept is applied to the Boeing VR-12 airfoil. Test results also show an elimination of the negative pitch damping observed in the baseline moment hysteresis curves.
Leading edge effects on laminar flat plate boundary layer and aerodynamic heating at Mach 10.4
Proposed optical system integrated into plasma arc welding torch provides image of leading edge of weld pool and welding-arc-initiation point. Welding torch aligned better with joint. System includes coherent bundle of optical fibers and transparent cup.
The post return-to-flight (RTF) inspection methodology for the Orbiter Leading Edge Structural Subsystem (LESS) is currently being defined. Numerous NDT modalities and techniques are being explored to perform the flight-to-flight inspections of the reinforced carbon/carbon (RCC) composite material for impact damage, general loss of mass in the bulk layers, or other anomalous conditions that would pose risk to safe return upon re-entry. It is possible to have an impact upon ascent that is not visually observable on the surface, yet causes internal damage. Radiographic testing may be a useful NDT technique for such occurrences. The authors have performed radiographic tests on full-sized mock samples of LESS hardware with embedded image quality phantoms. Digitized radiographic film, computed radiography and flat panel digital real-time radiography was acquired using a GE Eresco 200 x-ray tube, and Se-75 and Yb-169 radioisotopes.