Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Interaction of energetic particles with waves in strongly inhomogeneous solar wind plasmas

Observations performed in the solar wind by different satellites show that electron beams accelerated in the low corona during solar flares can propagate up to distances around 1 AU, that Langmuir waves' packets can be clumped into spikes with peak amplitudes three orders of magnitude above the mean, and that the average level of density fluctuations can reach several percents. A Hamiltonian model is built describing the properties of Langmuir waves propagating in a plasma with random density fluctuations by the Zakharov's equations and the beam by means of particles moving self-consistently in the fields of the waves. Numerical simulations, performed using parameters relevant to solar type III conditions at 1 AU, show that when the average level of density fluctuations is sufficiently low, the beam relaxation and the wave excitation processes are very similar to those in a homogeneous plasma and can be described by the quasilinear equations of the weak turbulence theory. On the contrary, when the average level of density fluctuations overcomes some threshold depending on the ratio of the thermal velocity to the beam velocity, the plasma inhomogeneities crucially influence the characteristics of the Langmuir turbulence and the beam-plasma interaction.

79 ASTRONOMY AND ASTROPHYSICS↗

Performance of a dynamic single bubbler in single and two-phase immiscible liquids

Ensuring nonproliferation and safeguards of special nuclear materials (SNM) is a critical aspect of advancing the nuclear fuel cycle. Traditional bubbler systems used to estimate liquid levels and densities in nuclear recycling processes have limitations, particularly in harsh environments where dip-tube corrosion and buildup necessitate frequent maintenance and recalibration. This study explores the Dynamic Single Bubbler (DSB) method, which utilizes a single dip-tube attached to a linear actuator to estimate liquid properties dynamically. This approach is extended to estimate liquid-liquid interfaces in immiscible liquids and employs a linear regression method to reduce uncertainties and improve accuracy. The DSB method achieved density estimate uncertainties of less than 0.5% and surface level estimate uncertainties typically under 0.5%, across various fluids including water, acetone, methanol, mineral oil, glycerol, and aqueous salt solutions. Results indicate that the DSB method provides accurate and robust estimates of liquid density and surface levels with minimal maintenance and without the need for calibration. Additionally, the method's applicability to immiscible liquids and various dip-tube geometries was demonstrated, showing promise for widespread use in nuclear and other industrial applications.

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗

Multi-Dimensional Quantum Effect Simulation Using a Density-Gradient Model and Script-Level Programming Techniques

A density-gradient (DG) model is used to calculate quantum-mechanical corrections to classical carrier transport in MOS (Metal Oxide Semiconductor) inversion/accumulation layers. The model is compared to measured data and to a fully self-consistent coupled Schrodinger and Poisson equation (SCSP) solver. Good agreement is demonstrated for MOS capacitors with gate oxide as thin as 21 A. It is then applied to study carrier distribution in ultra short MOSFETs (Metal Oxide Semiconductor Field Effect Transistor) with surface roughness. This work represents the first implementation of the DG formulation on multidimensional unstructured meshes. It was enabled by a powerful scripting approach which provides an easy-to-use and flexible framework for solving the fourth-order PDEs (Partial Differential Equation) of the DG model.

Rafferty, Connor S.↗

Development of the Science Data System for the International Space Station Cold Atom Lab

Cold Atom Laboratory (CAL) is a facility that will enable scientists to study ultra-cold quantum gases in a microgravity environment on the International Space Station (ISS) beginning in 2016. The primary science data for each experiment consists of two images taken in quick succession. The first image is of the trapped cold atoms and the second image is of the background. The two images are subtracted to obtain optical density. These raw Level 0 atom and background images are processed into the Level 1 optical density data product, and then into the Level 2 data products: atom number, Magneto-Optical Trap (MOT) lifetime, magnetic chip-trap atom lifetime, and condensate fraction. These products can also be used as diagnostics of the instrument health. With experiments being conducted for 8 hours every day, the amount of data being generated poses many technical challenges, such as downlinking and managing the required data volume. A parallel processing design is described, implemented, and benchmarked. In addition to optimizing the data pipeline, accuracy and speed in producing the Level 1 and 2 data products is key. Algorithms for feature recognition are explored, facilitating image cropping and accurate atom number calculations.

bose einstein condensate↗

The dependence of C IV broad absorption line properties on accompanying Si IV and Al III absorption: relating quasar-wind ionization levels, kinematics, and column densities

We consider how the profile and multi-year variability properties of a large sample of C IV Broad Absorption Line (BAL) troughs change when BALs from Si IV and/or Al III are present at corresponding velocities, indicating that the line of sight intercepts at least some lower ionization gas. We derive a number of observational results for C IV BALs separated according to the presence or absence of accompanying lower ionization transitions, including measurements of composite profile shapes, equivalent width (EW), characteristic velocities, composite variation profiles, and EW variability. We also measure the correlations between EW and fractional-EW variability for C IV, Si IV, and Al III. Our measurements reveal the basic correlated changes between ionization level, kinematics, and column density expected in accretion-disk wind models; e.g., lines of sight including lower ionization material generally show deeper and broader C IV troughs that have smaller minimum velocities and that are less variable. Many C IV BALs with no accompanying Si IV or Al III BALs may have only mild or no saturation.

79 ASTRONOMY AND ASTROPHYSICS↗

Dissipative Reactions with Intermediate-Energy Beams: A Novel Approach to Populate Complex-Structure States in Rare Isotopes

A novel pathway for the formation of multiparticle-multihole excited states in rare isotopes is reported from highly energy- and momentum-dissipative inelastic-scattering events measured in reactions of an intermediate-energy beam of 38 Ca on a Be target. The negative-parity, complex-structure final states in 38 Ca are observed following the in-beam γ-ray spectroscopy of events in the 9 Be( 38 Ca, 38 Ca + γ)X reaction in which the scattered projectile loses longitudinal momentum of order Δp || = 700 MeV/c. Here, the characteristics of the observed final states are discussed and found to be consistent with the formation of excited states involving the rearrangement of multiple nucleons in a single, highly energetic projectile-target collision. Unlike the far-less-dissipative, surface-grazing reactions usually exploited for the in-beam γ-ray spectroscopy of rare isotopes, these more energetic collisions appear to offer a practical pathway to nuclear-structure studies of more complex multiparticle configurations in rare isotopes—final states conventionally thought to be out of reach with high-luminosity fast-beam-induced reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Self-generated zonal flows in the plasma turbulence driven by trapped-ion and trapped-electron instabilities

This paper presents a study of zonal flows generated by trapped-electron mode and trapped-ion mode micro turbulence as a function of two plasma parameters—banana width and electron temperature. For this purpose, a gyrokinetic code considering only trapped particles is used. First, an analytical equation giving the predicted level of zonal flows is derived from the quasi-neutrality equation of our model, as a function of the density fluctuation levels and the banana widths. Then, the influence of the banana width on the number of zonal flows occurring in the system is studied using the gyrokinetic code. Finally, the impact of the temperature ratio T{sub e}/T{sub i} on the reduction of zonal flows is shown and a close link is highlighted between reduction and different gyro-and-bounce-average ion and electron density fluctuation levels. This reduction is found to be due to the amplitudes of gyro-and-bounce-average density perturbations n{sub e} and n{sub i} gradually becoming closer, which is in agreement with the analytical results given by the quasi-neutrality equation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Air pollution and survival within the Washington University-EPRI Veterans Cohort: risks based on modelled estimates of ambient levels of hazardous and criteria air pollutants

For this paper, we considered relationships between mortality, vehicular traffic density, and ambient levels of 12 hazardous air pollutants, elemental carbon (EC), oxides of nitrogen (NOx), sulfur dioxide (SO{sub 2}), and sulfate (SO{sub 4}{sup -2}). These pollutant species were selected as markers for specific types of emission sources, including vehicular traffic, coal combustion, smelters, and metal-working industries. Pollutant exposures were estimated using emissions inventories and atmospheric dispersion models. We analyzed associations between county ambient levels of these pollutants and survival patterns among approximately 70,000 U.S. male veterans by mortality period (1976-2001 and subsets), type of exposure model, and traffic density level. We found significant associations between all-cause mortality and traffic-related air quality indicators and with traffic density per se, with stronger associations for benzene, formaldehyde, diesel particulate, NOx, and EC. The maximum effect on mortality for all cohort subjects during the 26-yr follow-up period is approximately 10%, but most of the pollution-related deaths in this cohort occurred in the higher-traffic counties, where excess risks approach 20%. However, mortality associations with diesel particulates are similar in high- and low-traffic counties. Sensitivity analyses show risks decreasing slightly over time and minor differences between linear and logarithmic exposure models. We conclude that tailpipe emissions of both gases and particles are among the most significant and robust predictors of mortality in this cohort and that most of those associations have weakened over time. There may be concerns associated with large stationary sources burning coal, residual fuel oil and municipal solid wastes. Nickel and arsenic have been identified in coal fly ash and residual oil. 81 refs., 3 figs., 7 tabs.

01 COAL, LIGNITE, AND PEAT↗

Discovery of the new isotope 251 Lr and the α-decay fine structure in 253 L

The products of the 203, 205 Tl ( 50 Ti, 2n) fusion-evaporation reactions were studied using the recently commissioned Argonne Gas-Filled Analyzer at Argonne National Laboratory. Two α-decay activities with energies of 9210(19) and 9246(19) keV and half-lives of $42^{+42}_{-14}$ and $24.4^{+7.0}_{-4.5}$ ms were observed which were followed by the known α decays of 247 Md and 243 Es . They are interpreted as originating from the 1/2 ⁻ [521] and 7/2 ⁻ [514] single-proton Nilsson states in the hitherto unknown isotope 251 Lr . From the measured Q α values the 1/2 ⁻ level was placed 117(27) keV above the 7/2 - level in 251 Lr in contrast to 255 Lr where the 1/2 ⁻ level is the lowest. Also, the α decay of 253 Lr was studied in more detail and a new α line at 8660(20) keV was found and a new half-life value of 2.46(32) s for an isomeric state in 253 Lr was measured. The 251, 253, 255 Lr Q α values were compared with predictions of various mass models. The relative energies of the 1/2 ⁻ [521] and 7/2 ⁻ [514] single-proton Nilsson states in 251, 253, 255 Lr isotopes were compared with results of the cranking shell model with pairing treated using the particle-number-conserving method. The level separation and, in particular, the level order change between 251 Lr and 255 Lr was reproduced only when the hexacontetrapole deformation ϵ 6 was included in the calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The structural, electronic and dynamic properties of the L1{sub 2}- type Co{sub 3}Ti alloy

The structural, electronic and dynamic properties of the cubic Co{sub 3}Ti alloy in L1{sub 2} structure have been investigated using a pseudopotential plane wave (PP-PW) method within the generalized gradient approximation proposed by Perdew–Burke–Ernzerhof (GGA-PBE). The structural properties, including the lattice constant, the bulk modulus and its pressure derivative agree reasonably with the previous results. The density of state (DOS), projected density of state (PDOS) and electronic band structure are also reported. The DOS shows that Co{sub 3}Ti alloy has a metallic character since the energy bands cross the Fermi level. The density of states at Fermi level mainly comes from the Co-3d states. Phonon dispersion curves and their corresponding total densities of states were obtained using a linear response in the framework of the density functional perturbation theory. All computed phonon frequencies are no imaginer and thus, Co{sub 3}Ti alloy is dynamically stable. The zone center phonon modes have been founded to be 9.307, 9.626 and 13.891 THz for Co{sub 3}Ti.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploiting dissipative reactions to perform in-beam γ-ray spectroscopy of the neutron-deficient isotopes 38,39 Ca

The neutron-deficient Ca isotopes continue to attract attention due to their importance for testing isospin symmetry and their relevance in capture reactions of interest for nova nucleosynthesis and the shape of light curves in Type I x-ray bursts. To date, spectroscopic information on 38,39 Ca is largely limited to data on lower-spin excited states. Here, we report in-beam γ-ray spectroscopy of complementary higher-spin, complex-structure states in 39 Ca populated in fast-beam-induced, momentum-dissipative processes leading to neutron pickup onto excited configurations of the projectile, 9 Be( 38 Ca*, 39 Ca + γ)X. Such a dissipative reaction was recently characterized for the case of inelastic scattering of 38 Ca off 9 Be, 9 Be( 38 Ca, 38 Ca + γ)X. Additional data and discussion on the nuclear structure of 38 Ca is also presented. Furthermore, an explanation for the more-complex-structure states, populated with small cross sections in one-nucleon knockout reactions, and observed in the tails of their longitudinal momentum distributions, is also offered.

20 ≤ A ≤ 38↗

Performance and transport in the ARC tokamak

The ARC TM tokamak, a high-field (𝐵 𝑇 = 11.4 T) fusion power plant, under development by Commonwealth Fusion Systems, is studied using a suite of integrated modelling tools to predict its fusion power generation (𝑃𝑓⁡𝑢⁢𝑠), transport and confinement properties. Analysis is based off an ARC operational point scoped first with zero-dimensional (0-D) plasma operational contour (POPCON) modelling to produce 1.13 GW of fusion power. A suite of integrated modelling tools (TRANSP, ASTRA and TORAX) were applied to predict the performance and kinetic profiles of the ARC design point, yielding a range of predicted performance spanning from ∼900 to 1300 MW in rough quantitative agreement with POPCON predictions. The sensitivity of these results to uncertain modelling inputs was probed using scans of pedestal boundary conditions around EPED-predicted values (total pressure and temperature ratios), tungsten concentration and seperatrix density around their nominal assumptions. Pedestal pressure and pedestal top (𝑇 𝑖 /𝑇 𝑒 ) play a large role in 1.5-dimensional performance predictions, able to modify the predicted 𝑃 𝑓⁡𝑢⁢𝑠 by a factor of 2 within reasonable assumptions. High-fidelity core nonlinear gyrokinetic profile predictions, performed using CGYRO (Candy et al. 2016 J. Comput. Phys., vol. 324, pp. 73–93) coupled with the PORTALS (Rodriguez-Fernandez et al. 2024 Nucl. Fusion, vol. 64, 076034; Phys. Plasmas, vol. 31, 2024, 062501) framework, yield substantially lower performance (𝑃 𝑓⁡𝑢⁢𝑠 =677 MW) compared with 0-D and medium-fidelity modelling for nominal assumptions, showing that there is non-negligible uncertainty between models and that future work on SPARC may help resolve discrepancies. Lower overall performance results from significantly reduced volume-averaged densities and temperatures, along with reduced levels of density and temperature peaking. Turbulence and transport are largely dominated by ion temperature gradient across the profile, confirmed by both linear stability and the response of the nonlinear fluxes to changes in gradients, with some impact of kinetic ballooning modes in the deep core. This work represents one of the most complete scoping of potential fusion power plant conditions performed to date. The extensive integrated modelling provides confidence in ARC performance approaching 1 GW, while nonlinear gyrokinetic modelling results in open questions into the physics of density and temperature peaking in fusion-power-plant-relevant operational space. A discussion of results and the role that the SPARC tokamak (Creely et al. 2020 J. Plasma Phys., vol. 86, 865860502) will play in informing ARC design, performance and operation is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancement in field emission current density of Ni nanoparticles embedded in thin silica matrix by swift heavy ion irradiation

The field emission (FE) properties of nickel nanoparticles embedded in thin silica matrix irradiated with 100 MeV Au{sup +7} ions at various fluences are studied here. A large increase in FE current density is observed in the irradiated films as compared to their as deposited counterpart. The dependence of FE properties on irradiation fluence is correlated with surface roughness, density of states of valence band and size distribution of nanoparticles as examined with atomic force microscope, X-ray photoelectron spectroscopy, and grazing incidence small angle x-ray scattering. A current density as high as 0.48 mA/cm{sup 2} at an applied field 15 V/μm has been found for the first time for planar field emitters in the film irradiated with fluence of 5.0 × 10{sup 13} ions/cm{sup 2}. This significant enhancement in the current density is attributed to an optimized size distribution along with highest surface roughness of the same. This new member of field emission family meets most of the requirements of cold cathodes for vacuum micro/nanoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An optical analog of the Borrmann effect in photonic crystals

Numerical simulation using the layered Korringa-Kohn-Rostoker (LKKR) method is applied to calculate the reflection and absorption spectra of an s-polarized electromagnetic wave incident on a faced-centered cubic photonic crystal (PC) with opal structure whose sites are occupied by two-layer metal-dielectric spheres. The reflection and absorption coefficients of the PC are analyzed as a function of the angle of incidence of the electromagnetic wave on the crystal surface. A range of wavelengths {lambda} and angles of inclination {theta} to the normal is found in which the absorption experiences a sharp change under small variations of the above parameters. The appearance of peaks in the absorption spectrum of the PC is analyzed, and the spectrum is compared with the behavior of the reduced density of states. By the finite difference time domain (FDTD) method applied to the Maxwell equations, the spatial distribution of the energy density of electromagnetic field inside each of five layers of the PC is obtained at angles of incidence of 23{sup o} and 30{sup o} for a wave-length of 455 nm. It is demonstrated that the sharp maxima of the density of electromagnetic-field energy that are localized on the surfaces of absorbing metal spheres correspond to the absorption maximum. At the same time, at the absorption minimum, the maxima of the field energy density in each of the five layers are localized mainly between the lattice sites of the PC. An analogy between this phenomenon and the Borrmann effect, which is known in X-ray spectroscopy of ordinary crystals, is analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the theory of H2 rotational excitation

A number of mechanisms for exciting higher-J states in the ground vibrational level are considered. Attention is given to collisions with H atoms and electrons. Other mechanisms involve a cascading down from upper vibrational levels, following absorption and reemission of photons in the Lyman and Werner bands, or a cascading down from upper vibrational levels, following formation of hydrogen molecules in excited vibrational and rotational levels. Theoretical population densities of rotational levels are shown in a graph.

Spitzer, L., Jr.↗

On the quality of tape-cast thin films of sulfide electrolytes for solid-state batteries

All-solid-state lithium batteries (ASSLBs) have the potential to increase energy density, improve safety, and allow for lower manufacturing costs compared to conventional, liquid-based Li-ion batteries. The thickness of solid electrolyte (SE) layer dictates the cell-level energy density and it is desirable to make the SE layer as thin as possible while maintaining uniformity and defect-free. Manufacturing a high- quality, thin sulfide SE layer at large-scale, however, is challenging. Previous studies have addressed the compatibility of materials used for manufacturing thin sulfide SE films, paving the way for further investigation of processing conditions and film quality. Here we report a strong correlation between the solid loading of dispersions and the quality of tape-casted thin sulfide SE films. We also demonstrate a method for quantifying the quality of thin SE films by observing both pin-hole defects and larger heterogeneous agglomerations of particles in the films. Our thin sulfide SE films containing ~5 wt% binder are defect-free and show similar ionic conductivity compared to a cold-pressed, binder-free, thick SE pellet, resulting in an ~11X reduction of area specific resistance. Here, this work on the solid loading of the dispersion used in a scalable tape casting process provides insight for manufacturing high-quality, thin sulfide SE films and to increase the cell-level energy density of ASSLB.

36 MATERIALS SCIENCE↗

Structures of exotic 131,133Sn isotopes and effect on r-process nucleosynthesis

Background: Four strong single-particle bound levels with strikingly similar level spacings have recently been measured in 131Sn and 133Sn. This similarity has not yet been addressed with a theoretical nuclear structure model. Information on these single particle bound levels, as well as on resonant levels above the neutron capture threshold, are also needed to determine neutron capture cross sections -- and corresponding capture reaction rates -- on 130,132Sn. The 130Sn(n,gamma) rate was shown in a recent sensitivity study to significantly impact the synthesis of heavy elements in the r-process in supernovae. Purpose: Understand the structure of bound and resonant levels in 131,133Sn, and determine if the densities of unbound resonant levels are sufficiently high to warrant statistical model treatments of neutron capture on 130,132Sn. Method: Single-particle bound and resonant levels for 131,133Sn are self-consistently calculated by the analytical continuation of the coupling constant (ACCC) based on a relativistic mean field (RMF) theory with BCS approximation. Results: We obtain four strong single-particle bound levels in both 131,133Sn with an ordering that agrees with experiments and spacings that, while differing from experiment, are consistent between the Sn isotopes. We also find at most one single-particle level in the effective energy range for neutron captures in the r-process. Conclusions: Our RMF+ACCC+BCS model successfully reproduces observed single-particle bound levels in 131,133Sn and self-consistently predicts single-particle resonant levels with densities too low for widely used traditional statistical model treatments of neutron capture cross sections on 130,132Sn employing Fermi gas level density formulations.

exotic nuclei↗

Impact of Mg content on native point defects in Mg{sub x}Zn{sub 1−x}O (0 ≤ x ≤ 0.56)

We used depth-resolved cathodoluminescence spectroscopy and surface photovoltage spectroscopy to measure the densities, energy levels, and spatial distributions of zinc/magnesium cation and oxygen vacancies in isostructural, single-phase, non-polar Mg{sub x}Zn{sub 1−x}O alloys over a wide (0 ≤ x ≤ 0.56) range. Within this wide range, both defect types exhibit strong Mg content-dependent surface segregation and pronounced bulk density minima corresponding to unit cell volume minima, which can inhibit defect formation due to electrostatic repulsion. Mg in ZnO significantly reduces native defect densities and their non-polar surface segregation, both major factors in carrier transport and doping of these oxide semiconductors.

36 MATERIALS SCIENCE↗