SEARCH · Search NASA

Results for “MAGNETIC INDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS2011

SA13B-1900 Auroral Charging of the International Space Station

Electrostatic potential variations of the International Space Station (ISS) relative to the space plasma environment are dominated by interaction of the negatively grounded 160 volt US photovoltaic power system with the plasma environment in sunlight and inductive potential variations across the ISS structure generated by motion of the vehicle across the Earth's magnetic field. Auroral charging is also a source of potential variations because the 51.6? orbital inclination of ISS takes the vehicle to sufficiently high magnetic latitudes to encounter precipitating electrons during geomagnetic storms. Analysis of auroral charging for small spacecraft or isolated insulating regions on ISS predict rapid charging to high potentials of hundreds of volts but it has been thought that the large capacitance of the entire ISS structure on the order of 0.01 F will limit frame potentials to less than a volt when exposed to auroral conditions. We present three candidate auroral charging events characterized by transient ISS structure potentials varying from approximately 2 to 17 volts. The events occur primarily at night when the solar arrays are unbiased and cannot therefore be due to solar array current collection. ISS potential decreases to more negative values during the events indicating electron current collection and the events are always observed at the highest latitudes along the ISS trajectory. Comparison of the events with integral >30 keV electron flux measurements from NOAA TIROS spacecraft demonstrate they occur within regions of precipitating electron flux at levels consistent with the energetic electron thresholds reported for onset of auroral charging of the DMSP and Freja satellites. In contrast to the DMSP and Freja events, one of the ISS charging events occur in sunlight.

Minow, Joseph I.↗

NASA NTRS1992

Parallel arrays of Josephson junctions for submillimeter local oscillators

In this paper we discuss the influence of the DC biasing circuit on operation of parallel biased quasioptical Josephson junction oscillator arrays. Because of nonuniform distribution of the DC biasing current along the length of the bias lines, there is a nonuniform distribution of magnetic flux in superconducting loops connecting every two junctions of the array. These DC self-field effects determine the state of the array. We present analysis and time-domain numerical simulations of these states for four biasing configurations. We find conditions for the in-phase states with maximum power output. We compare arrays with small and large inductances and determine the low inductance limit for nearly-in-phase array operation. We show how arrays can be steered in H-plane using the externally applied DC magnetic field.

Pance, Aleksandar↗

DOE OSTI2025

A new tubular ironless linear induction motor using non-interrupted winding method

The ironless linear induction motor device can be used for any application which requires a large motion span or rotation restrictedly by the ironless feature due to the strong magnetic field environment. One of the possible applications is ITER diagnostics shutters. The tokamak reactor systems have a severe radiation issue during the operation. The traditional Kapton-insulated wires have significantly lower radiation resistance than an expected large radiation dose at ITER Motion Stark Effect (MSE) shutter location. Furthermore, the traditional single-sided linear induction motor winds the wire to make the N-turn pitch coils independently and then connect them in series to make a one-phase winding. Therefore, it is a big challenge to make so many radiation-protection connectors in such a limited space as inside the vacuum vessel of fusion reactors. The approved mineral-insulated kinds of cables need a large bend radius for the end turns, so the traditional single-sided linear motor with two-layer three-phase windings need to be upgraded to the tubular linear motors. The new proposed tubular ironless linear induction motor can not only overcome the large bend radius issue with the mineral-insulated cables but also allow the motor coils wound continuously around the tubular-shaped stator, forward and backward N times to make a N-turn winding for each phase, in order to resolve the radiation protection issue with the winding connection. The 3D transient Maxwell electromagnetic model with a tubular three-phase linear induction motor has been analyzed. Furthermore, this paper will present the detailed design and winding method of ironless linear induction motor actuators, and results of the 3D transient numerical simulation of the actuator performance.

Ironless↗

NASA NTRS1982

Theory of electron-positron showers in double radio sources

A black hole of mass of about 300 million solar masses is assumed to be present in the nucleus of an active galaxy or quasar. With an axial magnetic field near 1000 gauss, a potential drop 10 to the 19th volts is generated by the unipolar induction of a rotating accretion disk surrounding the black hole. The possibility that the acceleration of electrons or positrons in the unipolar fields initiates an electromagnetic cascade shower at distances at least 10 to the 16th cm from the black hole is investigated. The scattering medium for the shower is considered to be the spectrum of low energy photons originating from the inner region of the disk. It is found that at completion of the cascade, power-law energy spectra of relativistic electrons and positrons and of gamma-rays emerge under appropriate conditions. If the cascade-initiating particles are collimated, the electrons and positrons emerge in a collimated beam. Such beams may power extragalactic double radio sources.

Burns, M. L.↗

NASA NTRS1982

The local dispersion relation for magneto-atmospheric waves

The local dispersion relation for magneto-atmospheric waves is discussed in terms of the linearized theory of waves in a plane-stratified, inviscid, perfectly conducting atmosphere under uniform gravity. The normally used local dispersion relation is demonstrated to not be unique, depending instead on the order of derivation from the fundamental first-order perturbation equations of continuity, momentum, energy, and induction. Furthermore, it is shown that the local dispersion relation predicts that the cutoff frequency decreases with increasing magnetic field strength, while the WKB approximation method projects an increase in the cutoff frequency with increasing magnetic field strength. A new form of the local dispersion relation is developed, and consideration is given to the special case of a global dispersion relation in conditions of an isothermal atmosphere with a horizontal magnetic field.

Thomas, J. H.↗

NASA NTRS1989

Progress in kinetic inductance thermometers for X-ray calorimeters

Conventional X-ray microcalorimeters have so far used ionimplanted resistors for thermometers. Recently, however, several new methods for sensing small temperature changes have been suggested that are nondissipative. Such devices may have intrinsically better energy resolution by eliminating the Johnson noise present in resistive devices. The use of kinetic inductance thermometers for X-ray microcalorimeters is being investigated. This technique exploits the strong temperature dependence of magnetic penetration depth of thin superconducting films. The prototype system, designed for operation at 1.5 K, uses films of aluminum and tin. Once the expected temperature sensitivity and alpha particle detection have been demonstrated, aluminum will be replaced with titanium or another material with a suitable critical temperature and the device will be operated at 0.3 K. At this temperature, the energy resolution from thermal noise should be sufficiently good to allow X-ray detection.

Rawley, G. L.↗

NASA NTRS2008

Thin-Film Magnetic-Field-Response Fluid-Level Sensor for Non-Viscous Fluids

An innovative method has been developed for acquiring fluid-level measurements. This method eliminates the need for the fluid-level sensor to have a physical connection to a power source or to data acquisition equipment. The complete system consists of a lightweight, thin-film magnetic-field-response fluid-level sensor (see Figure 1) and a magnetic field response recorder that was described in Magnetic-Field-Response Measurement-Acquisition System (LAR-16908-1), NASA Tech Briefs, Vol. 30, No. 6 (June 2006), page 28. The sensor circuit is a capacitor connected to an inductor. The response recorder powers the sensor using a series of oscillating magnetic fields. Once electrically active, the sensor responds with its own harmonic magnetic field. The sensor will oscillate at its resonant electrical frequency, which is dependent upon the capacitance and inductance values of the circuit.

Woodard, Stanley E.↗

NASA NTRS2015

Inductive Position Sensor

An inductive position sensor uses three parallel inductors, each of which has an axial core that is an independent magnetic structure. A first support couples first and second inductors and separate them by a fixed distance. A second support coupled to a third inductor disposed between the first and second inductors. The first support and second support are configured for relative movement as distance changes from the third inductor to each of the first and second inductors. An oscillating current is supplied to the first and second inductors. A device measures a phase component of a source voltage generating the oscillating current and a phase component of voltage induced in the third inductor when the oscillating current is supplied to the first and second inductors such that the phase component of the voltage induced overlaps the phase component of the source voltage.

Youngquist, Robert C.↗

DOE OSTI2025

ThinCurr: An open-source 3D thin-wall eddy current modeling code for the analysis of large-scale systems of conducting structures

In this paper we present a new thin-wall eddy current modeling code, ThinCurr, for studying inductively-coupled currents in 3D conducting structures -- with primary application focused on the interaction between currents flowing in coils, plasma, and conducting structures of magnetically-confined plasma devices. The code utilizes a boundary finite element method on an unstructured, triangular grid to accurately capture device structures. The new code, part of the broader Open FUSION Toolkit, is open-source and designed for ease of use without sacrificing capability and speed through a combination of Python, Fortran, and C/C++ components. Scalability to large models is enabled through use of hierarchical off-diagonal low-rank compression of the inductance matrix, which is otherwise dense. Ease of handling large models of complicated geometry is further supported by automatic determination of supplemental elements through a greedy homology approach. Here, a detailed description of the numerical methods of the code and verification of the implementation of those methods using cross-code comparisons against the VALEN code and Ansys commercial analysis software is shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS2007

Design of an Integrated-System FARAD Thruster

Pulsed inductive plasma accelerators are spacecraft propulsion devices in which energy is stored in a capacitor and then discharged through an inductive coil. The device is electrodeless, inducing a current s heet in a plasma located near the face of the coil. The propellant is accelerated and expelled at a high exhaust velocity (order of 10 km/s) through the interaction of the plasma current and the induced magne tic field, The Faraday Accelerator with RF-Assisted Discharge (FARAD) thruster is a type of pulsed inductive plasma accelerator in which t he plasma is preionized by a mechanism separate from that used to for m the current sheet and accelerate the gas. Employing a separate preionization mechanism allows for the formation of an inductive current s heet at much lower discharge energies and voltages than those used in previous pulsed inductive accelerators like the Pulsed Inductive Thr uster (PIT). In this paper, we present the design of a benchtop FARAD thruster with all the subsystems (mass injection, preionization, and acceleration) integrated into a single unit. Design of the thruster follows the guidelines and similarity performance parameters presented elsewhere. The system is designed to use the ringing, RF-frequency s ignal produced by a discharging Vector Inversion Generator (VIG) to p reionize the gas. The acceleration stage operates on the order of 100 J/pulse and can be driven by several different pulsed powertrains. These include a simple capacitor coupled to the system, a Bernardes and Merryman configuration, and a pulsecompression circuit that takes a temporally broad, low current pulse and transforms it into a short, h igh current pulse. A set of applied magnetic field coils are integrated into the system to guide the preionized propellant as it spreads ov er the face of the inductive acceleration coil. The coils are operate d in a pulsed mode, and the thruster can be operated without using the coils to determine if there is a performance improvement gain realiz ed when an applied field is present.

Polzin, K.A.↗

DOE OSTI2024

Interactions of clathrate hydrate promoters sodium dodecyl sulfate and tetrahydrofuran investigated using 1H diffusion nuclear magnetic resonance at hydrate-forming conditions

Thermodynamic hydrate promoters and kinetic hydrate promoters can be used to reduce the P–T conditions for clathrate hydrate synthesis to decrease the nucleation induction time while increasing growth rates. Two commonly used promoters for hydrate research are tetrahydrofuran (THF) and sodium dodecyl sulfate (SDS), which can increase the overall hydrate promotion when used in tandem as compared to individually. There are several molecular theories regarding how SDS promotes hydrate growth. This study explores the micellular theory, for which hydrate formation depends on surfactant aggregates (micelles) at a critical micelle concentration (CMC) to increase the interfacial surface area. The micellular theory is the most investigated and criticized surfactant hydrate promotion theory. To address questions related to micellar behavior, this study investigates the intermolecular behavior between SDS and THF for the identification of micelles at hydrate-forming conditions. The systems explored contained THF at 3 and 5 wt. % with varying concentrations of SDS below and above the CMC. Several methods including a qualitative visual method, conductivity, interfacial tensiometry, 13C Liquid-state Nuclear Magnetic Resonance (NMR) spectroscopy, and 1H diffusion NMR spectroscopy were evaluated at temperatures below the Krafft point of SDS and above 0 °C. The presence of THF at low concentrations decreased the critical temperature for the formation of SDS micelles, where SDS is solubilized in THF/water solution at hydrate-forming temperatures without precipitation. The CMC of SDS was decreased significantly even at hydrate-forming conditions. Mixed surfactant–cosolvent micellular behavior of SDS in the presence of low concentrations of THF was confirmed at hydrate-forming conditions above 0 °C.

Chemistry↗

NASA NTRS2001

Magnetized or Unmagnetized: Ambiguity Persists Following Galileo's Encounters with Io in 1999 and 2000

Magnetometer data from Galileo's close encounters with Io do not establish absolutely either the existence or absence of an internal magnetic moment because the measurements were made in regions where plasma currents contribute sizable magnetic perturbations. Data from an additional encounter where the closest approaches were made beneath Io's south polar regions, were lost. The recent passes enhance our understanding of the interaction of Io and its flux tube with the torus, and narrows the limits on possible internal sources of magnetic fields. Simple field-draping arguments account for some aspects of the observed rotations. Analyses in terms of both a magnetized and an unmagnetized Io are considered. Data from the February 2000 pass disqualify a strongly magnetized Io (surface equatorial field stronger than the background field) but do not disqualify a weakly magnetized Io (surface equatorial field of the order of Ganymede's but smaller than the background field at Io). Models imply that if Io is magnetized, its magnetic moment is not absolutely antialigned with the rotation axis. The inferred tilt is consistent with contributions from an inductive field on the order of those observed at Europa and Callisto. The currents would flow in the outer mantle or aesthenosphere if an induced field is present. Wave perturbations differing on flux tubes that do or do not link directly to Io and its ionosphere suggest the following: (1) the latter flux tubes are almost stagnant in Io's frame; and (2) a unipolar inductor correctly models the currents linking Io to Jupiter's ionosphere.

Kivelson, Margaret G.↗

NASA NTRS1983

Electromagnetic deep-probing (100-1000 kms) of the Earth's interior from artificial satellites: Constraints on the regional emplacement of crustal resources

The reconnaissance phase of using satellite observtions to studying electromagnetic induction in the solid earth is summarized. Several points are made: (1) satellite data apparently suffer far less from the effects of near surface lateral heterogeneities in the earth than do ground-based data; (2) zonal ionospheric currents during the recovery phase of major magnetic storms appear to be minimal, at least in the dawn and dusk sectors wher MAGSAT was flown; hence the internal contributions that satellites observe during these times is in fact due primarily to induction in the Earth with little or no contribution from ionospheric currents; and (3) the interpretation of satellite data in terms of primitive electromagnetic response functions, while grossly over-simplified, results in a surprisingly well-resolved radius for an equivalent super-conductor representing the conductivity region of the Earth's interior (5,370 + or - 120 km).

Hermance, J. F.↗

NASA NTRS1993

Concept for a high-resolution thermometer utilizing the temperature dependence of the magnetic penetration depth

A thermometer using the temperature dependence of the magnetic penetration depth in superconductors is described which has the potential for temperature resolution, when using a dc SQUID readout, on the order of 1 pK. One such device has been fabricated and characterized to demonstrate proof of concept. It consists of primary and secondary coils of NbTi wire wound on a copper toroidal core on which a thin layer of In (Tc = 3.4 K) has been deposited. The temperature dependence of the mutual inductance, M(T), or self-inductance, is used to detect changes in temperature. Measurements of M(T) have been made with an ac excitation of the primary for various frequencies and peak magnetic field strengths. Estimates of ultimate temperature resolution are given.

Shirron, P. J.↗

NASA NTRS1990

Pulsed plasmoid electric propulsion

A method of electric propulsion is explored where plasmoids such as spheromaks and field reversed configurations (FRC) are formed and then allowed to expand down a diverging conducting shell. The plasmoids contain a toroidal electric current that provides both heating and a confining magnetic field. They are free to translate because there are no externally supplied magnetic fields that would restrict motion. Image currents in the diverging conducting shell keep the plasmoids from contacting the wall. Because these currents translate relative to the wall, losses due to magnetic flux diffusion into the wall are minimized. During the expansion of the plasma in the diverging cone, both the inductive and thermal plasma energy are converted to directed kinetic energy producing thrust. Specific impulses can be in the 4000 to 20000 sec range with thrusts from 0.1 to 1000 Newtons, depending on available power.

Bourque, Robert F.↗

NASA NTRS1992

Solar-wind/magnetospheric dynamos: MHD-scale collective entry of the solar wind energy, momentum and mass into the magnetosphere

A quasi open MHD (Magnetohydrodynamic) scale anomalous transport controlled boundary layer model is proposed, where the MHD collective behavior of magnetofluids (direct dynamo effect, anomalous viscous interaction and anomalous diffusion of the mass and the magnetic field) plays the main role in the conversion of the Solar Wind (SW) kinetic and magnetic energy into electromagnetic energy in the Magnetosphere (MSp). The so called direct and indirect dynamo effects are based on inductive and purely dissipative energy conversion, respectively. The self organization ability of vector fields in turbulent magnetofluids implies an inductive response of the plasma, which leads to the direct dynamo effect. The direct dynamo effect describes the direct formation of localized field aligned currents and the transverse Alfven waves and provides a source for MHD scale anomalous diffusivity and viscosity. The SW/MSp coupling depends on the dynamo efficiency.

Song, Yan↗

DOE OSTI2024

Core inductive electric field during sawtooth crashes on DIII-D

Sawtooth crashes on tokamak plasmas exhibit relaxation much faster than resistive time scales via a mechanism not fully understood. Using core magnetic measurements from the Radial Interferometer-Polarimeter (RIP) diagnostic on the DIII-D tokamak, Grad–Shafranov equilibria constrained by internal magnetic measurements that have high time resolution (<1μs) can be computed, allowing analysis of how equilibrium parameters such as safety factor q, current density J, and parallel electric field E ∥ , particularly on-axis, evolve. At the sawtooth crash, on-axis safety factor q 0 is observed to rise by 5% but remain below 1 throughout the cycle, and on-axis current density J 0 is observed to drop by 5%. On-axis parallel electric field E ∥ (0) is found to be balanced by ηJ 0 (resistivity times on-axis current density) except during the 200 µs crash period, where E ∥ (0) reaches 22 V m –1 , exceeding ηJ 0 by a factor of more than 2000. These first measurements in tokamak plasmas verify that generalized Ohm's law is not balanced during the crash by resistive effects alone; this is a finding expected due to the relaxation being much faster than resistive timescales. As a result, measurement of the electric field during the tokamak sawtooth serves to illuminate the physical mechanisms at work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Variable-spectrum mode control of high poloidal beta discharges

DIII-D experiments demonstrate that high pressure, broad current profile equilibria can be accessed in the high poloidal beta regime by optimizing the MHD mode control poloidal spectrum. A novel, variable spectrum (VS) magnetic feedback scheme implemented using the DIII-D internal non-axisymmetric coils (I-coils) facilitated access to reduced internal inductance $l$ i operation above the no-wall beta limit compared with both no feedback and fixed spectrum feedback. In addition, the VS feedback helped avoid beta collapses caused by marginally unstable resistive wall mode activity. The lower and upper I-coil rows were configured in two independent feedback loops, allowing the feedback field's poloidal spectrum to vary and track changes in the plasma mode structure as the edge safety factor q 95 varied from 11 to 6 during the discharges. The q 95 dependence of the measured phase difference between the lower and upper I-coil rows during VS feedback is qualitatively compatible with ideal MHD simulations of the least-stable plasma kink mode and with plasma response simulations that included kinetic modifications to ideal MHD. The VS feedback approach is a straightforward way to improve resilience to variations in mode structure that occur as plasma parameters change. The demonstrated expansion of the operating space to lower $l$ i is expected to improve the coupling of the plasma kink mode to external fields and beneficial wall eddy currents, and is compatible with high bootstrap fraction operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗