Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Size dependent optical properties of Si quantum dots in Si-rich nitride/Si{sub 3}N{sub 4} superlattice synthesized by magnetron sputtering

A spectroscopic ellipsometry compatible approach is reported for the optical study of Si quantum dots (QDs) in Si-rich nitride/silicon nitride (SRN/Si{sub 3}N{sub 4}) superlattice, which based on Tauc-Lorentz model and Bruggeman effective medium approximation. It is shown that the optical constants and dielectric functions of Si QDs are strongly size dependent. The suppressed imaginary dielectric function of Si QDs exhibits a single broad peak analogous to amorphous Si, which centered between the transition energies E{sub 1} and E{sub 2} of bulk crystalline Si and blue shifted toward E{sub 2} as the QD size reduced. A bandgap expansion observed by the TL model when the size of Si QD reduced is in good agreement with the PL measurement. The bandgap expansion with the reduction of Si QD size is well supported by the first-principles calculations based on quantum confinement.

36 MATERIALS SCIENCE↗

Potential for reactive pulsed-dc magnetron sputtering of nanocomposite VO{sub x} microbolometer thin films

Vanadium oxide (VO{sub x}) thin films were deposited by reactive pulsed-dc sputtering a metallic vanadium target in argon/oxygen mixtures with substrate bias. Hysteretic oxidation of the vanadium target surface was assessed by measuring the average cathode current during deposition. Nonuniform oxidization of the target surface was analyzed by Raman spectroscopy. The VO{sub x} film deposition rate, resistivity, and temperature coefficient of resistance were correlated to oxygen to argon ratio, processing pressure, target-to-substrate distance, and oxygen inlet positions. To deposit VO{sub x} in the resistivity range of 0.1–10 Ω-cm with good uniformity and process control, lower processing pressure, larger target-to-substrate distance, and oxygen inlet near the substrate are useful.

36 MATERIALS SCIENCE↗

Growth, electrical, and optical properties of nanocrystalline VO{sub 2} (011) thin films prepared by thermal oxidation of magnetron sputtered vanadium films

Nanocrystalline vanadium dioxide (VO{sub 2}) thin films were prepared on glass substrates at different deposition temperatures by oxidizing sputtered vanadium films. Atomic force microscope, x-ray diffraction, and Raman scattering were employed to characterize the films. It was confirmed that low deposition temperature resulted in improving oxygen atom diffusion and VO{sub 2} nanograin growth in the thermal oxidation process. Investigation of the electrical properties revealed that the amplitude of semiconductor-metal transition and transition temperature decreased, whereas the Hall mobility and carrier concentration increased as the deposition temperature elevated. Optical investigations were carried out in the ultraviolet-visible-near-infrared region. Narrow optical band gaps were observed in these films.

36 MATERIALS SCIENCE↗

Electronic structure and electrical transport in ternary Al-Mg-B films prepared by magnetron sputtering

Nanostructured ternary Al-Mg-B films possess high hardness and corrosion resistance. In the present work, we study their electronic structure and electrical transport. The films exhibit semiconducting characteristics with an indirect optical-bandgap of 0.50 eV, as deduced from the Tauc plots, and a semiconductor behavior with a Fermi level of {approx}0.24 eV below the conduction band. Four-probe and Hall measurements indicated a high electrical conductivity and p-type carrier mobility, suggesting that the electrical transport is mainly due to hole conduction. Their electrical properties are explained in terms of the film nanocomposite microstructure consisting of an amorphous B-rich matrix containing AlMgB{sub 14} nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterizations of Binary FeCr (AISI 430) Thin Films Deposited from a Single Magnetron Sputtering Under Easy Controllable Deposition Parameters

A series of 50-nm binary FeCr martensitic thin films were sputtered from a single source made of commercial AISI 430 ferritic stainless steel under the deposition rates gradually increased from 0.03 to 0.11 nm/s with 0.02 nm/s steps at stationary condition. And, under 0.09 nm/s deposition rate, a second series of the films were also deposited under the rotation speed of their substrates which was chosen at 0, 25, and 45 rpm. As far as we are concerned, this study is the first investigation of properties of the thin films produced from AISI 430. The atomic Fe content in the films increased from 79.3 to 98.6% while atomic Cr content decreased from 20.5 to 1.2% with the increase of deposition rate from 0.03 to 0.11 nm/s. According to compositional analysis, the Fe content increased while Cr content decreased with increasing deposition rate. The reason for this may be attributed to the relatively different bond energy/melting point of metals which have different contents sputtered from source material since this physical parameter is very significant for the sputtering process. And, the Fe content in the films decreased from 84.9 to 79.2 at. % while the Cr content increased from 14.9 to 20.6 at. % when the increase of rotation speed of substrate. The crystal structure of all films was observed to have a body-centered tetragonal phase and the intensity of (110) peak varied with the atomic Fe content. The surface observations of films performed by a scanning electron microscope exposed that the number of surface grains increased with the increase of deposition rate and decreased with the increase of rotation speed. According to surface roughness analysis done by an atomic force microscope, the roughness of the film surfaces increased as the deposition rate increased. And, the roughness of the film surfaces decreased as the rotation speed increased. This has been consistent with the grain size and roughness parameters. Thus, increasing deposition rate and decreasing rotation speed of the substrate caused an increase in grain size and roughness parameters. The magnetic measurements of the films achieved, by a vibrating sample magnetometer at room temperature, displayed that the saturation magnetization, M{sub s}, values increased from 820.1 to 1700.4 emu/cm{sup 3}, the remanence magnetization, M{sub r}, values increased from 293 to 817 emu/cm{sup 3}, and the coercivity, H{sub c}, value also increased from 38 to 107 Oe with the increasing of deposition rate. It is also seen that the magnetic easy axis are in the film plane due to the shape anisotropy. With the increase rotation speed, the values of M{sub s} and M{sub r} increased and the H{sub c} decreased. It was seen that variation of Fe content in the films influences the M{sub s} values and the H{sub c} values are consistent with the surface properties. It was concluded that the deposition rate and the rotation speed of the substrate play a considerable role on the structural and related magnetic properties of the sputtered FeCr thin films, and the properties of the films can be easily controlled by changing production parameters.

36 MATERIALS SCIENCE↗

Structural and superconducting properties of Nb 3 Sn films grown by multilayer sequential magnetron sputtering

Nb 3 Sn thin films are fabricated by sequential sputtering followed by annealing at 850–1200°C in vacuum. The effects of the annealing temperature and time on the formation of Nb 3 Sn were examined. The film crystal structure, morphology, surface topography and composition were distinguished by X-ray diffraction, field-emission scanning electron microscopy, atomic force microscopy, and energy dispersive X-ray spectroscopy analysis. The superconducting properties of the films were characterized by measuring the surface resistivity by the four-point probe method. The highest critical temperature T c = 17.86 K was observed for the Nb 3 Sn films annealed at 950°C for 3 h. When the films were annealed above 1000°C for 3 h, Sn evaporation resulted in a Nb-rich film, degrading the superconducting performance. Annealing at 1200°C for 3 h resulted in evaporation of Sn leaving less than 1% Sn on the surface, as detected by energy dispersive spectroscopy, and for that film a T c of 7.9 K was observed.

36 MATERIALS SCIENCE↗

Fabrication of GaN nanowires on Pd-coated sapphire substrates by magnetron sputtering technique

Large-scale GaN nanowires were successfully synthesized through ammoniating Ga{sub 2}O{sub 3}/Pd films sputtered on the sapphire(001) substrates. X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, photoluminescence and Raman spectrum were used to characterize the specimens. The results demonstrate that nanowires are single crystal with hexagonal wurtzite structure and have good optical properties. Raman scattering appears broadened and asymmetric compared with those of bulk GaN due to its polycrystalline nature. In addition, the growth mechanism of GaN nanowires is briefly discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanotwin formation in Ni-Mo-W alloys deposited by dc magnetron sputtering

Nanotwinned metals and alloys have an attractive suite of properties, but the formation of the underlying nanostructure is generally dependent on the alloy chemistry and processing conditions. This study was undertaken to investigate the effect of deposition rate on nanotwin formation in sputter deposited Ni 84 Mo 11 W 5 that possess ultrahigh strength and stability. Specifically, deposition rates of 0.5-2.3 nm/s were examined and the grain size, texture, twin spacing and hardness were characterized. Minimal variations in the underlying nanostructure and attendant hardness were observed, elucidating a wide processing window and the importance of chemistry on the formation of nanotwins in this alloy.

36 MATERIALS SCIENCE↗