Search NASA⌕ Search

SEARCH · Search NASA

Results for “MULTIPLE PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Carbon Cycling, Environmental & Rural Economic Impacts of Collecting & Processing Specific Woody Feedstocks in Biofuels

Woody biomass will be an essential feedstock for a large-scale cellulosic biofuel industry. The life cycle carbon accounting for the production of biofuels from woody feedstocks is complex and has engendered significant controversy. Issues such as below ground carbon, carbon debt, varied regional forest practices, multiple parallel forest product lines, and development of realistic counterfactual scenarios all contribute to the complexity. DOE funded CORRIM to develop comprehensive and definitive lifecycle inventories and assessments on the production of fuels from woody feedstocks. CORRIM brought together expertise in forest practices, short rotation woody crops, bioconversion of woody biomass, process modeling, and life cycle assessment to successfully accomplish this goal. The CORRIM team has developed data on forest productivity, fuel usage, and fuel production for six regionally specific forest systems. These six forest systems include three current commercial systems; southern pine plantations, Douglas-fir plantations, naturally regenerated Northeastern (NE) spruce/fir, and three ‘short rotation woody crops’, poplar, eucalyptus and willow, which are at different stages of demonstration in the US. The fuel production systems include cellulosic ethanol and bio-oil based hydrocarbons. The project was successfully reviewed at the BETO Program review in March 2015, 2017, and 2019 and has resulted currently in 19 publications and reports and 35 presentations at both national and international conferences, with more in the pipeline. See publications and presentations for links to each document. Finally, and most importantly, CORRIM has gone beyond the scope of the original DOE proposal to work closely with GREET at Argonne National Laboratory (ANL) to incorporate all the life cycle data and scenario models into their modeling system. GREET is the most widely used and definitive information source for evaluating lifecycle carbon emissions for fuels. The incorporation of CORRIM data from this project guarantees the results of the research will be extensively used and widely disseminated. Technical process improvements and policy relevant accomplishments are detailed in the relevant programmatic sections in the full report including citations therein. Highlights are summarized here for easy reference.

09 BIOMASS FUELS↗
NASA NTRS2017

Importance of Calibration/Validation Traceability for Multi-Sensor Imaging Spectrometry Applications

Knowledge of calibration traceability is essential for ensuring the quality of data products relying on multiple sensors and especially true for imaging spectrometers. The current work discusses the expected impact that imaging spectrometers have in ensuring radiometric traceability for both multispectral and hyperspectral products. The Climate Absolute Radiance and Refractivity Observatory Pathfinder mission is used to show the role that high-accuracy imaging spectrometers can play in understanding test sites used for vicarious calibration of sensors. The associated Solar, Lunar for Absolute Reflectance Imaging Spectroradiometer calibration demonstration system is used to illustrate recent advances in laboratory radiometric calibration approaches that will allow both the use of imaging spectrometers as calibration standards as well as to ensure the consistency of the multiple imaging spectrometers expected to be on orbit in the next decade.

imagin↗
DOE OSTI2020

Latest D0 results on exotic hadrons produced in $p\bar p $ collision

Prompt and nonprompt productions of exotic multiquark states are studied using the $\sim$10.4~fb$^{-1}$ data sample collected by the D0 experiment in Tevatron $p\bar{p}$ collisions at $\sqrt{s}$ = 1.96 TeV. The recent D0 results on the prompt and nonprompt production of the $X(3872)$ and $Z_c^+(3900)$ states and the $P_c$ pentaquarks at the 4450~MeV region are reported. Signals corresponding to these states are found in the nonprompt production, whereas only the $X(3872)$ state is seen in the prompt production. The ratio of prompt to nonprompt $X(3872)$ production is about three times larger in the D0 measurement than that obtained by the ATLAS experiment at 8 TeV. Theoretically, the production, formation, coalescence, and disassociation processes are expected to be quite different for conventional mesons with a spatial size of (0.4-0.8) fm, compact multiquark states such as tetraquarks with a size of a few fm, and spatially extended molecular states with a size of (4-10) fm. They can be differently affected in prompt hadron-hadron collisions where there are many additional particles emitted from the interaction point. Consequently, the prompt to nonprompt production ratio of spatially extended exotic states can be suppressed at LHC comparing with the Tevatron conditions, because of large difference in the hadron-hadron collisions particle multiplicity. The prompt production studies provide an opportunity to better understand the nature of exotic states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2015

Multiple Flow Loop SCADA System Implemented on the Production Prototype Loop

The following report covers FY 15 activities to develop supervisory control and data acquisition (SCADA) system for the Northstar Moly99 production prototype gas flow loop. The goal of this effort is to expand the existing system to include a second flow loop with a larger production-sized blower. Besides testing the larger blower, this system will demonstrate the scalability of our solution to multiple flow loops.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1999

Automated Flight Dynamics Product Generation for the EOS AM-1 Spacecraft

As part of NASA's Earth Science Enterprise, the Earth Observing System (EOS) AM-1 spacecraft is designed to monitor long-term, global, environmental changes. Because of the complexity of the AM-1 spacecraft, the mission operations center requires more than 80 distinct flight dynamics products (reports). To create these products, the AM-1 Flight Dynamics Team (FDT) will use a combination of modified commercial software packages (e.g., Analytical Graphic's Satellite ToolKit) and NASA-developed software applications. While providing the most cost-effective solution to meeting the mission requirements, the integration of these software applications raises several operational concerns: (1) Routine product generation requires knowledge of multiple applications executing on variety of hardware platforms. (2) Generating products is a highly interactive process requiring a user to interact with each application multiple times to generate each product. (3) Routine product generation requires several hours to complete. (4) User interaction with each application introduces the potential for errors, since users are required to manually enter filenames and input parameters as well as run applications in the correct sequence. Generating products requires some level of flight dynamics expertise to determine the appropriate inputs and sequencing. To address these issues, the FDT developed an automation software tool called AutoProducts, which runs on a single hardware platform and provides all necessary coordination and communication among the various flight dynamics software applications. AutoProducts, autonomously retrieves necessary files, sequences and executes applications with correct input parameters, and deliver the final flight dynamics products to the appropriate customers. Although AutoProducts will normally generate pre-programmed sets of routine products, its graphical interface allows for easy configuration of customized and one-of-a-kind products. Additionally, AutoProducts has been designed as a mission-independent tool, and can be easily reconfigured to support other missions or incorporate new flight dynamics software packages. After the AM-1 launch, AutoProducts will run automatically at pre-determined time intervals . The AutoProducts tool reduces many of the concerns associated with the flight dynamics product generation. Although AutoProducts required a significant effort to develop because of the complexity of the interfaces involved, its use will provide significant cost savings through reduced operator time and maximum product reliability. In addition, user satisfaction is significantly improved and flight dynamics experts have more time to perform valuable analysis work. This paper will describe the evolution of the AutoProducts tool, highlighting the cost savings and customer satisfaction resulting from its development. It will also provide details about the tool including its graphical interface and operational capabilities.

Matusow, Carla↗
DOE OSTI2022

Hierarchical printed product and composition and method for making the same

Disclosed herein are embodiments of a printable composition that can be used to make printed products of a chosen material chemistry that have different levels of porosity within the printed product's structure Also disclosed herein are embodiments of a printed product that has multiple levels of porosity throughout its structure, which can include a macroscale level of porosity, a microscale level of porosity, a nanoscale level of porosity and any combination thereof. These printed products can be made using a 3-D printer and can be made from a single printable composition without the need to add different structural components during the production process. Also disclosed herein are embodiments of a method for making and using a printed product.

Lee, Matthew N.↗
NASA NTRS2015

Evaluating the Sensitivity of Agricultural Model Performance to Different Climate Inputs: Supplemental Material

Projections of future food production necessarily rely on models, which must themselves be validated through historical assessments comparing modeled and observed yields. Reliable historical validation requires both accurate agricultural models and accurate climate inputs. Problems with either may compromise the validation exercise. Previous studies have compared the effects of different climate inputs on agricultural projections but either incompletely or without a ground truth of observed yields that would allow distinguishing errors due to climate inputs from those intrinsic to the crop model. This study is a systematic evaluation of the reliability of a widely used crop model for simulating U.S. maize yields when driven by multiple observational data products. The parallelized Decision Support System for Agrotechnology Transfer (pDSSAT) is driven with climate inputs from multiple sources reanalysis, reanalysis that is bias corrected with observed climate, and a control dataset and compared with observed historical yields. The simulations show that model output is more accurate when driven by any observation-based precipitation product than when driven by non-bias-corrected reanalysis. The simulations also suggest, in contrast to previous studies, that biased precipitation distribution is significant for yields only in arid regions. Some issues persist for all choices of climate inputs: crop yields appear to be oversensitive to precipitation fluctuations but under sensitive to floods and heat waves. These results suggest that the most important issue for agricultural projections may be not climate inputs but structural limitations in the crop models themselves.

simulation↗
DOE OSTI2016

Product component genealogy modeling and field-failure prediction

Many industrial products consist of multiple components that are necessary for system operation. There is an abundance of literature on modeling the lifetime of such components through competing risks models. During the life-cycle of a product, it is common for there to be incremental design changes to improve reliability, to reduce costs, or due to changes in availability of certain part numbers. These changes can affect product reliability but are often ignored in system lifetime modeling. By incorporating this information about changes in part numbers over time (information that is readily available in most production databases), better accuracy can be achieved in predicting time to failure, thus yielding more accurate field-failure predictions. This paper presents methods for estimating parameters and predictions for this generational model and a comparison with existing methods through the use of simulation. Our results indicate that the generational model has important practical advantages and outperforms the existing methods in predicting field failures.

42 ENGINEERING↗
DOE OSTI2012

A Thermophilic Ionic Liquid-Tolerant Cellulase Cocktail for the Production of Cellulosic Biofuels

Generation of biofuels from sugars in lignocellulosic biomass is a promising alternative to liquid fossil fuels, but efficient and inexpensive bioprocessing configurations must be developed to make this technology commercially viable. One of the major barriers to commercialization is the recalcitrance of plant cell wall polysaccharides to enzymatic hydrolysis. Biomass pretreatment with ionic liquids (ILs) enables efficient saccharification of biomass, but residual ILs inhibit both saccharification and microbial fuel production, requiring extensive washing after IL pretreatment. Pretreatment itself can also produce biomass-derived inhibitory compounds that reduce microbial fuel production. Therefore, there are multiple points in the process from biomass to biofuel production that must be interrogated and optimized to maximize fuel production. Here, we report the development of an IL-tolerant cellulase cocktail by combining thermophilic bacterial glycoside hydrolases produced by a mixed consortia with recombinant glycoside hydrolases. This enzymatic cocktail saccharifies IL-pretreated biomass at higher temperatures and in the presence of much higher IL concentrations than commercial fungal cocktails. Sugars obtained from saccharification of IL-pretreated switchgrass using this cocktail can be converted into biodiesel (fatty acid ethyl-esters or FAEEs) by a metabolically engineered strain of E. coli . During these studies, we found that this biodiesel-producing E. coli strain was sensitive to ILs and inhibitors released by saccharification. This cocktail will enable the development of novel biomass to biofuel bioprocessing configurations that may overcome some of the barriers to production of inexpensive cellulosic biofuels.

09 BIOMASS FUELS↗
DOE OSTI2024

Materials scarcity during the clean energy transition: Myths, challenges, and opportunities

Abstract Efforts to reach net zero targets by the second half of the century will have profound materials supply implications. The anticipated scale and speed of the energy transition in both transportation and energy storage raises the question of whether we risk running out of the essential critical materials needed to enable this transition. Early projections suggest that disruptions are likely to occur in the short term for select critical materials, but at the same time these shortages provide a powerful incentive for the market to respond in a variety of ways before supply-level stress becomes dire. In April 2023, the MRS Focus on Sustainability subcommittee sponsored a panel discussion on the role of innovation in materials science and engineering in supporting supply chains for clean energy technologies. Drawing on examples from the panel discussion, this perspective examines the myth of materials scarcity, explains the compelling need for innovation in materials in helping supply chains dynamically adapt over time, and illustrates how the Materials Research Society is facilitating engagement with industry to support materials innovation, now and in the future. Graphical Abstract Highlights In this commentary, we examine the myth of materials scarcity, explain the compelling need for innovation in materials in helping supply chains dynamically adapt over time, and show how the materials research community can effectively engage with industry, policymakers, and funding agencies to drive the needed innovation in critical areas. Discussion Demand for certain materials used in clean energy technologies is forecasted to increase by multiples of current production over the next decades. This has drawn attention to supply chain risks and has created a myth that we will “run out” out of certain materials during the energy transition. The reality is that markets have multiple mechanisms to adapt over the long-term, and near-term shortages or expectations of shortages provide a powerful incentive for action. In this commentary, we highlight different ways materials innovation can help solve these issues in the near term and long term, and how the materials research community can effectively engage with industry and policymakers.

Ku, Anthony Y. (ORCID:0000000337622914)↗
DOE OSTI2016

Multiple response optimization for higher dimensions in factors and responses

When optimizing a product or process with multiple responses, a two-stage Pareto front approach is a useful strategy to evaluate and balance trade-offs between different estimated responses to seek optimum input locations for achieving the best outcomes. After objectively eliminating non-contenders in the first stage by looking for a Pareto front of superior solutions, graphical tools can be used to identify a final solution in the second subjective stage to compare options and match with user priorities. Until now, there have been limitations on the number of response variables and input factors that could effectively be visualized with existing graphical summaries. We present novel graphical tools that can be more easily scaled to higher dimensions, in both the input and response spaces, to facilitate informed decision making when simultaneously optimizing multiple responses. A key aspect of these graphics is that the potential solutions can be flexibly sorted to investigate specific queries, and that multiple aspects of the solutions can be simultaneously considered. As a result, recommendations are made about how to evaluate the impact of the uncertainty associated with the estimated response surfaces on decision making with higher dimensions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

Extrapolating W -associated jet-production ratios at the LHC

Electroweak vector-boson production, accompanied by multiple jets, is an important background to searches for physics beyond the standard model. A precise and quantitative understanding of this process is helpful in constraining deviations from known physics. We study four key ratios in W + n -jet production at the LHC. We compute the ratio of cross sections for W + n - to W + (n-1)-jet production as a function of the minimum jet transverse momentum. We also study the ratio differentially, as a function of the W-boson transverse momentum; as a function of the scalar sum of the jet transverse energy, H$jets\atop{T}$; and as a function of certain jet transverse momenta. We show how to use such ratios to extrapolate differential cross sections to W + 6 -jet production at next-to-leading order, and we cross-check the method against a direct calculation at leading order. We predict the differential distribution in H$jets\atop{T}$ for W + 6 jets at next-to-leading order using such an extrapolation. We use the BlackHat software library together with SHERPA to perform the computations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

New development of laser ion source for highly charged ion beam production at Institute of Modern Physics (invited)

A laser ion source based on Nd:YAG laser has been being studied at the Institute of Modern Physics for the production of high intensity high charge state heavy ion beams in the past ten years, for possible applications both in a future accelerator complex and in heavy ion cancer therapy facilities. Based on the previous results for the production of multiple-charged ions from a wide range of heavy elements with a 3 J/8 ns Nd:YAG laser [Zhao et al., Rev. Sci. Instrum. 85, 02B910 (2014)], higher laser energy and intensity in the focal spot are necessary for the production of highly charged ions from the elements heavier than aluminum. Therefore, the laser ion source was upgraded with a new Nd:YAG laser, the maximum energy of which is 8 J and the pulse duration can be adjusted from 8 to 18 ns. Since then, the charge state distributions of ions from various elements generated by the 8 J Nd:YAG laser were investigated for different experimental conditions, such as laser energy, pulse duration, power density in the focal spot, and incidence angle. It was shown that the incidence angle is one of the most important parameters for the production of highly charged ions. The capability of producing highly charged ions from the elements lighter than silver was demonstrated with the incidence angle of 10° and laser power density of 8 × 10{sup 13} W cm{sup −2} in the focal spot, which makes a laser ion source complementary to the superconducting electron cyclotron resonance ion source for the future accelerator complex especially in terms of the ion beam production from some refractory elements. Nevertheless, great efforts with regard to the extraction of intense ion beams, modification of the ion beam pulse duration, and reliability of the ion source still need to be made for practical applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2004

Precipitation Analysis at Fine Time Scales Using Multiple Satellites: Real-time and Research Products and Applications

Quasi-global precipitation analyses at fine time scales (3-hr) are described. TRMM observations (radar and passive microwave) are used to calibrate polar-orbit microwave observations from SSM/I (and other satellites instruments, including AMSR and AMSU) and geosynchronous IR observations. The individual data sets are then merged using a priority order based on quality to form the Multi-satellite Precipitation Analysis (MPA). Raingauge information is used to help constrain the satellite-based estimates over land. The TRMM standard research product (Version 6 3B-42 of the TRMM products) will be available for the entire TRMM period (January 1998-present) in 2004. The real-time version of this merged product has been produced over the past two years and is available on the U.S. TRMM web site (trmm.gsfc.nasa.gov) at 0.25" latitude-longitude resolution over the latitude range from 5O"N-5O0S. Validation of daily totals indicates good results, with limitations noted in mid-latitude winter over land and regions of shallow, orographic precipitation. Various applications of these estimates are described, including: 1) detecting potential floods in near real-time; 2) analyzing Indian Ocean precipitation variations related to the initiation of El Nino; 3) determining characteristics of the African monsoon; and 4) analysis of diurnal variations.

Adler, Robert↗
DOE OSTI2015

Using the CMS threaded framework in a production environment

During 2014, the CMS Offline and Computing Organization completed the necessary changes to use the CMS threaded framework in the full production environment. We will briefly discuss the design of the CMS Threaded Framework, in particular how the design affects scaling performance. We will then cover the effort involved in getting both the CMSSW application software and the workflow management system ready for using multiple threads for production. Finally, we will present metrics on the performance of the application and workflow system as well as the difficulties which were uncovered. As a result, we will end with CMS' plans for using the threaded framework to do production for LHC Run 2.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Laser scattering by submicron droplets formed during the electrical explosion of thin metal wires

Abstract This paper presents the results of studying dispersed media formation during the electrical explosion of thin metal wires in vacuum by using low-current generators (~1–10 kA). Particular attention is paid to the analysis of the composition and structure of the corresponding explosion products as well as to the problem of their visualization using simultaneous laser interferometry and shadow imaging at two wavelengths (1.064 µ m and 0.532 µ m). Our findings indicate the important role in the visualization of the explosion products that belongs to multiple scattering by submicron droplets of dense condensed matter, which are mixed with metal vapor. The hypothesis on the existence of submicron droplets in the products of exploding metal wires correlates with the results obtained by soft x-ray radiography combined with a laser probing technique. Taking into account the multiple scattering by submicron droplets, it is possible to significantly clarify the parameters of the explosion products visualized via laser probing techniques as well as to gain a deeper insight into the physics behind the electrical wire explosion.

Physics↗