Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modeling and Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Evaluation of Cloud-resolving and Limited Area Model Intercomparison Simulations using TWP-ICE Observations. Part 1: Deep Convective Updraft Properties

Ten 3D cloud-resolving model (CRM) simulations and four 3D limited area model (LAM) simulations of an intense mesoscale convective system observed on January 23-24, 2006 during the Tropical Warm Pool – International Cloud Experiment (TWP-ICE) are compared with each other and with observed radar reflectivity fields and dual-Doppler retrievals of vertical wind speeds in an attempt to explain published results showing a high bias in simulated convective radar reflectivity aloft. This high bias results from ice water content being large, which is a product of large, strong convective updrafts, although hydrometeor size distribution assumptions modulate the size of this bias. Snow reflectivity can exceed 40 dBZ in a two-moment scheme when a constant bulk density of 100 kg m-3 is used. Making snow mass more realistically proportional to area rather than volume should somewhat alleviate this problem. Graupel, unlike snow, produces high biased reflectivity in all simulations. This is associated with large amounts of liquid water above the freezing level in updraft cores. Peak vertical velocities in deep convective updrafts are greater than dual-Doppler retrieved values, especially in the upper troposphere. Freezing of large rainwater contents lofted above the freezing level in simulated updraft cores greatly contributes to these excessive upper tropospheric vertical velocities. Strong simulated updraft cores are nearly undiluted, with some showing supercell characteristics. Decreasing horizontal grid spacing from 900 meters to 100 meters weakens strong updrafts, but not enough to match observational retrievals. Therefore, overly intense simulated updrafts may partly be a product of interactions between convective dynamics, parameterized microphysics, and large-scale environmental biases that promote different convective modes and strengths than observed.

clould-resolving↗
DOE OSTI2017

Comparison and Assessment of Three Advanced Land Surface Models in Simulating Terrestrial Water Storage Components over the United States

In preparation for next generation North American Land Data Assimilation System (NLDAS), 3 three advanced land surface models (CLM4.0, Noah-MP, and CLSM-F2.5) were run from 1979 4 to 2014 within the NLDAS-based framework. Monthly total water storage anomaly (TWSA) and 5 its individual water storage components were evaluated against satellite-based and in situ 6 observations, and reference reanalysis products at basin-wide and statewide scales. In general, all 7 three models are able to reasonably capture the monthly and interannual variability and 8 magnitudes for TWSA. However, contributions of the anomalies of individual water 9 components to TWSA are very dependent on the model and basin. A major contributor to the 10 TWSA is the anomaly of total column soil moisture content (SMCA) for CLM4.0 and Noah-MP 11 or groundwater storage anomaly (GWSA) for CLSM-F2.5 although other components such as 12 the anomaly of snow water equivalent (SWEA) also play some role. For each individual water 13 storage component, the models are able to capture broad features such as monthly and 14 interannual variability. However, there are large inter-model differences and quantitative 15 uncertainties in this study. Therefore, it should be thought of as a preliminary synthesis and 16 analysis.

58 GEOSCIENCES↗
DOE OSTI2018

Modeling and simulation of CO 2 capture using semipermeable elastic microcapsules

Very high rates of CO2 absorption have been demonstrated using semipermeable microcapsules filled with environmentally benign sodium carbonate solutions (Vericella et al., Nature communications 6, 2015). However, such capsules have also exhibited several traits, including water loss/uptake, elastic swelling and buckling, and precipitation of solids, which make them more complicated to engineer as a carbon capture material. To address this, a mechanistic model for mass transfer and chemical reaction has been developed, which accounts for these behaviors, and can be used as a predictive tool to explore capsule performance under different CO2 capture scenarios. The model uses a modified film theory to describe CO2 and H2O mass transfer rates, a concentration based description of vapor-liquid-solid equilibrium inside the capsule, and an elastic description of the capsule shell. Model predictions compare favorably to literature data for precipitating carbonates, as well as recent data for microcapsule CO2 absorption. The model was used to assess practical issues of capsule water transfer during a temperature swing CO2 absorption/desorption cycle. Model predictions indicate that capsules filled with high weight percent, precipitating sodium carbonate solution could be significantly or completely dehydrated during CO2 absorption. Subsequent rehydration of lean capsules at elevated temperature showed strong sensitivity to both gas humidity, and capsule shell elasticity.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Scaling of an Atmospheric Model to Simulate Turbulence and Cloud Microphysics in the Pi Chamber

Abstract The Pi Cloud Chamber offers a unique opportunity to study aerosol‐cloud microphysics interactions in a steady‐state, turbulent environment. In this work, an atmospheric large‐eddy simulation (LES) model with spectral bin microphysics is scaled down to simulate these interactions, allowing comparison with experimental results. A simple scalar flux budget model is developed and used to explore the effect of sidewalls on the bulk mixing temperature, water vapor mixing ratio, and supersaturation. The scaled simulation and the simple scalar flux budget model produce comparable bulk mixing scalar values. The LES dynamics results are compared with particle image velocimetry measurements of turbulent kinetic energy, energy dissipation rates, and large‐scale oscillation frequencies from the cloud chamber. These simulated results match quantitatively to experimental results. Finally, with the bin microphysics included the LES is able to simulate steady‐state cloud conditions and broadening of the cloud droplet size distributions with decreasing droplet number concentration, as observed in the experiments. The results further suggest that collision‐coalescence does not contribute significantly to this broadening. This opens a path for further detailed intercomparison of laboratory and simulation results for model validation and exploration of specific physical processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Geomagnetically Induced Current Field Test on Large Grid-Connected Power Transformers: Analysis, Model Development, and Simulations

Geomagnetic-induced current (GIC) flow in power grids can cause undesirable effects such as transformer overheating, harmonics, higher reactive power demand, etc. Many simulation models have been developed to study these effects, but real-world verification on modern transformer designs is rare. Here, this paper presents the first long-duration GIC field test in the U.S. performed on high-voltage, grid-connected transformers featuring winding clamps and tie rods instead of conventional tie bars. Field measurements were taken to evaluate GIC effects. These measurements also aided in developing and validating thermal and electromagnetic transient (EMT) models of the transformers. During the test, significant current and voltage distortions were observed along with considerable transformer reactive power losses. Analysis of the field measurements showed that the transformers’ hottest spot was at the inner windings, and their k-factors were close to factory test and software default values. Thermal simulations indicated that the transformers would not violate their thermal limits even for a GIC waveform that peaks at about 200 A/phase. EMT simulations revealed that increased transformer loading may reduce GIC-induced reactive power demand and harmonics in certain scenarios. The study also highlighted potential inaccuracies in using the k-factor method to calculate transformer reactive power losses.

EMTDC↗
DOE OSTI2017

Self-consistent core-pedestal transport simulations with neural network accelerated models

Fusion whole device modeling simulations require comprehensive models that are simultaneously physically accurate, fast, robust, and predictive. In this paper we describe the development of two neural-network (NN) based models as a means to perform a snon-linear multivariate regression of theory-based models for the core turbulent transport fluxes, and the pedestal structure. Specifically, we find that a NN-based approach can be used to consistently reproduce the results of the TGLF and EPED1 theory-based models over a broad range of plasma regimes, and with a computational speedup of several orders of magnitudes. These models are then integrated into a predictive workflow that allows prediction with self-consistent core-pedestal coupling of the kinetic profiles within the last closed flux surface of the plasma. Finally, the NN paradigm is capable of breaking the speed-accuracy trade-off that is expected of traditional numerical physics models, and can provide the missing link towards self-consistent coupled core-pedestal whole device modeling simulations that are physically accurate and yet take only seconds to run.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Using the Atmospheric Radiation Measurement (ARM) Datasets to Evaluate Climate Models in Simulating Diurnal and Seasonal Variations of Tropical Clouds

We use the long-term Atmospheric Radiation Measurement (ARM) datasets collected at the three Tropical Western Pacific (TWP) sites as a tropical testbed to evaluate the ability of the Community Atmosphere Model (CAM5) to simulate the various types of clouds, their seasonal and diurnal variations, and their impact on surface radiation. We conducted a series of CAM5 simulations at various horizontal grid spacing (around 2°, 1°, 0.5°, and 0.25°) with meteorological constraints from reanalysis. Model biases in the seasonal cycle of cloudiness are found to be weakly dependent on model resolution. Positive biases (up to 20%) in the annual mean total cloud fraction appear mostly in stratiform ice clouds. Higher-resolution simulations do reduce the positive bias in the frequency of ice clouds, but they inadvertently increase the negative biases in convective clouds and low-level liquid clouds, leading to a positive bias in annual mean shortwave fluxes at the sites, as high as 65 W m-2 in the 0.25° simulation. Such resolution-dependent biases in clouds can adversely lead to biases in ambient thermodynamic properties and, in turn, feedback on clouds. Both the CAM5 model and ARM observations show distinct diurnal cycles in total, stratiform and convective cloud fractions; however, they are out-of-phase by 12 hours and the biases vary by site. Our results suggest that biases in deep convection affect the vertical distribution and diurnal cycle of stratiform clouds through the transport of vapor and/or the detrainment of liquid and ice. We also found that the modelled gridmean surface longwave fluxes are systematically larger than site measurements when the grid that the ARM sites reside in is partially covered by ocean. The modeled longwave fluxes at such sites also lack a discernable diurnal cycle because the ocean part of the grid is warmer and less sensitive to radiative heating/cooling compared to land. Higher spatial resolution is more helpful is this regard. Our testbed approach can be easily adapted for the evaluation of new parameterizations being developed for CAM5 or other global or regional model simulations at high spatial resolutions.

Wang, Hailong↗
DOE OSTI2019

NREL's Capabilities in Modeling and Simulation of Thermal and Catalytic Conversion Processes

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility NREL's thermal and catalytic simulation and modeling team integrates experimental and computational capabilities to address the complexities of real biomass and waste streams, enabling development of renewable energy technologies. This fact sheet summarizes the core capabilities and applications.

09 BIOMASS FUELS↗
DOE OSTI2016

A scalable framework for the global offline community land model ensemble simulation

Current earth system models have a large range of uncertainty, owing to differences in the simulation of feedbacks and insufficient information to constrain model parameters. Parameter disturbance experiment provides a straightforward method to quantify the variation (uncertainty) outputs caused by model inputs. Owing to the software complexity and computational intensity of earth system models, a large-scale simulation framework is needed to support ensemble simulation required by parameter disturbance experiment. This paper presents a parallel framework for the community land model ensemble simulation. After a software structure review of the community land model simulation, a single factor parameter disturbance experiment of a reference computational experiment design is used to demonstrate the software design principles, computational characteristics of individual application, parallel ensemble simulation implementation, as well as the weak scalability of this simulation framework on a high-end computer. Lastly, the paper discusses some preliminary diagnostic analysis results of the single factor parameter disturbance experiments. The framework design considerations and implementation details described in this paper can be beneficial to many other research programmes involving large scale, legacy modelling system.

58 GEOSCIENCES↗
DOE OSTI2019

Pan-YANG/RA-ABM

Crowd-sourcing incorporates common citizens as rich sources of data and is promising for environmental monitoring. In this paper, we propose and test the idea of incorporating incentives to crowd-sourcing management for rainfall monitoring. Specifically, we modeled the allocation of incentives (quantitatively measurable and limited rewards) among crowd-sourcing participants for a theoretical rainfall monitoring case. For this purpose, we developed an integrated model comprising a reward allocation component to represent the decision‐making process of a central manager, an agent‐based model to simulate the interactions between the manager and participants, and a rainfall simulation model to evaluate the effectiveness of various reward allocation policies. We simulated six reward allocation policies of varying levels of administrative cost, and consideration of participant and rainfall spatial heterogeneities. The results suggest the performance of each policy to improve with the reward budget and their spatial uniformity. Among the six policies tested, we found that the participant density weighted maximum participation policy yields the most accurate estimation of rainfall intensity due to its more explicit consideration of the spatial distribution of participants; however, this policy associates with a high administrative cost. This highlights the trade‐off between performance and cost in designing effective reward allocation policies. This paper provides a physical and behavior simulation modeling tool to study the feasibility and complexity of reward‐based participant management for crowd-sourcing rainfall monitoring. The proposed crowd-sourcing method is beneficial for a wide range of applications that require rainfall data with fine resolution, such as stormwater management and water availability and biomass assessment for food and energy crops.

Yang, Pan↗
DOE OSTI2015

MEMS 3-DoF gyroscope design, modeling and simulation through equivalent circuit lumped parameter model

Pre-fabrication, behavioural and performance analysis with computer aided design (CAD) tools is a common and fabrication cost effective practice. In light of this we present a simulation methodology for a dual-mass oscillator based 3 Degree of Freedom (3-DoF) MEMS gyroscope. 3-DoF Gyroscope is modeled through lumped parameter models using equivalent circuit elements. These equivalent circuits consist of elementary components which are counterpart of their respective mechanical components, used to design and fabricate 3-DoF MEMS gyroscope. Complete designing of equivalent circuit model, mathematical modeling and simulation are being presented in this paper. Behaviors of the equivalent lumped models derived for the proposed device design are simulated in MEMSPRO T-SPICE software. Simulations are carried out with the design specifications following design rules of the MetalMUMPS fabrication process. Drive mass resonant frequencies simulated by this technique are 1.59 kHz and 2.05 kHz respectively, which are close to the resonant frequencies found by the analytical formulation of the gyroscope. The lumped equivalent circuit modeling technique proved to be a time efficient modeling technique for the analysis of complex MEMS devices like 3-DoF gyroscopes. The technique proves to be an alternative approach to the complex and time consuming couple field analysis Finite Element Analysis (FEA) previously used.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Modeling and Simulation Supporting Material Control and Accounting for Advanced Reactors: Task 2: Safeguards Modeling and Simulation Assessment

Commercial interest in advanced reactors for power production in the United States is increasing. A variety of advanced reactor designs are being developed, and many of them use non-traditional fuel forms. Therefore, the material control and accounting (MC&A) methods that will be required for these advanced reactor systems also need to be developed to ensure that the necessary safeguards are implemented. To provide information that can be leveraged to explore different MC&A approaches, three representative advanced reactor types were evaluated from a technical safeguards perspective. These reactor designs were selected to encompass common materials and configurations that could affect safeguards considerations. The three designs evaluated were a molten salt reactor (MSR), a gas-cooled reactor (GCR), and a heat pipe-cooled microreactor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2014

Assessment of uncertainties in the response of the African monsoon precipitation to land use change simulated by a regional model

Land use and land cover over Africa have changed substantially over the last sixty years and this change has been proposed to affect monsoon circulation and precipitation. This study examines the uncertainties on the effect of these changes on the African Monsoon system and Sahel precipitation using an ensemble of regional model simulations with different combinations of land surface and cumulus parameterization schemes. Furthermore, the magnitude of the response covers a broad range of values, most of the simulations show a decline in Sahel precipitation due to the expansion of pasture and croplands at the expense of trees and shrubs and an increase in surface air temperature.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Multi-dimensional Vlasov simulations and modeling of trapped-electron-driven filamentation of electron plasma waves

Kinetic simulations of two-dimensional finite-amplitude electron plasma waves are performed in a one-wavelength long system. A systematic study of the most unstable linear sideband mode, in particular its growth rate γ and wavenumber k{sub y}, is carried out by scanning the amplitude and wavenumber of the initial wave. Simulation results are compared with numerical and analytical solutions to a two-dimensional nonlinear Schrödinger model [H. A. Rose and L. Yin, Phys. Plasmas 15, 042311 (2008)] and to the reduced model by Kruer et al. [Phys. Rev. Lett. 23, 838 (1969)] generalized to two dimensions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗