Search NASA⌕ Search

SEARCH · Search NASA

Results for “NANOSCIENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Predicting the Rate of Homogeneous Intermetallic Nucleation within Steep Composition Gradients

Simulations of isothermal homogeneous nucleation from deeply undercooled amorphous melts exhibit systematic variations in nucleation behavior depending upon the strength of an imposed composition gradient. Data from molecular dynamics (MD) simulations in a model Ni/Al system permit quantification of the nucleation rate of the NiAl-B2 intermetallic phase and indicate that nucleation proceeds in a polymorphous mode. The nucleation rate decreases with increasing gradient, and nucleation is completely suppressed above a critical gradient. Based on an argument of crystal nucleus stability, a simple estimate provides good prediction of the critical gradient. Here, a modified classical nucleation model parameterized with thermodynamic and kinetic quantities calculated independently predicts the nucleation rates and their variation with the imposed gradient, matching the MD results very well.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Extremely Slow Trap-Mediated Hole Relaxation in Room-Temperature InP/ZnSe/ZnS Quantum Dots

Time-resolved photoluminescence (PL) and transient absorption (TA) spectroscopy have been used to elucidate the hole relaxation dynamics in high-quality InP/ZnSe/ZnS quantum dots (QDs) at room temperature. In QDs having an In/P ratio close to 1:1, hole cooling is fast compared to the ~40 ps time-correlated photon-counting instrument response. However, in QDs that luminesce at wavelengths greater than around 600 nm and have excess indium, a significant fraction of the PL exhibits a slower rise time. In this case, the PL rises over a range of timescales varying from close to the instrument response to approximately 300–400 ps. The time constant of the slowest component increases with increasing InP core size and the fraction of the PL that has the slow rise time increases with excess indium in the particle. In all cases, a slow rise time and any spectral evolution on that timescale are absent in the TA results, indicating that the slow dynamics may be assigned to relaxation in the valence band. QDs emitting at wavelengths below 560 nm show very different dynamics, exhibiting a barely detectable <50 ps rise time. Based on these results and measured elemental compositions, the slow hole relaxation is assigned to the transient population of indium-based traps in the ZnSe shell that are above the valence band edge only for the larger, red-emitting QDs. Here, the relative trap to band edge relaxation rates can be understood in terms of effective mass approximation hole wave function calculations, which show that the relaxation rate is largely determined by the extent to which the hole wave function in the lowest exciton penetrates into the ZnSe shell, overlapping the trapped-hole wave functions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Plasmonics-Enhanced UV Photocatalytic Water Purification

Titanium dioxide (TiO 2 ) is commonly used for photocatalytic decomposition of organic contaminants for the purpose of water purification. One promising method to enhance TiO 2 photocatalysis is the incorporation of surface plasmon resonance on its surface where photocatalytic reactions take place. Herein, a novel methodology using plasmonically tuned aluminum nanostructures to enhance the rate of photodecomposition of aqueous methyl orange is demonstrated. These nanostructures are tuned to the TiO 2 band gap in the UV regime and patterned on TiO 2 -coated substrates using nanosphere lithography. Compared to a blank TiO 2 film, the plasmonics is found to enhance the initial TiO 2 photocatalytic rate by up to 10 times, and further enhancement is possible upon refinement of the plasmonic technology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Resonance Raman Study of Shell Morphology in InP/ZnSe/ZnS Core/Shell/Shell Nanocrystals

Resonance Raman spectra and absolute cross sections of InP/ZnSe/ZnS core/shell/shell nanocrystals have been obtained at excitation wavelengths of 501.7, 457.9, and 410 nm. Eight different structures having nearly the same lowest excitonic absorption wavelength but significantly different stoichiometries are compared. The Raman spectra show phonon features attributable to both the InP core and the ZnSe shell. The largest differences among the structures are seen in the ZnSe phonon region by using excitation at 457.9 nm, on the low-energy edge of the absorption features having significant contributions from the ZnSe shell. Here, structures that are nearly stoichiometric (In:P ratio ≈1.0) show a sharp, strongly polarized peak near the bulk ZnSe phonon frequency (~250 cm –1 ) and a weak lower-frequency shoulder with a higher depolarization ratio. Structures having excess indium show a stronger low-frequency shoulder near 225 cm –1 and lower integrated Raman intensities throughout the ZnSe phonon region. These changes are attributed to the presence of indium atoms in the ZnSe shell. Furthermore, these results support a previous assignment of a slow rise component in the time-resolved photoluminescence spectra of nonstoichiometric structures to transient trapping of holes at indium defects in the shell.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Vapor-Phase Intercalation of Cesium into Black Phosphorous

Cesium vapors were charged into black phosphorous (BP) flakes at varied times and at a temperature gradient of 150 °C. The X-ray diffraction (XRD) measurements of these samples suggest a reduction in the strength of van der Waal interactions between BP layers leading to the loss of coherence of out-of-plane peaks. At the same time, the three main Raman modes of BP (A g 1 , B 2 g , and A g 2 ) steadily redshifted as exposure times were increased, with modes B 2 g and A g 2 shifting faster than A g 1 . After initial rapid downshifts of active BP phonon modes, this intercalation strategy showed its limits following prolonged exposure times. Saturation of BP flakes by Cs vapors ensued and the kinetics was fitted with an exponential decay function. Furthermore, the thermoelectric power (TEP) of cesiated BP exhibited an inversion in sign from positive to negative around 400 K, lending credence to the transformation of as-prepared BP which is a p-type semiconductor to an n-type equivalent due to Cs atom intercalation driven shifting of the Fermi level toward the conduction band of BP and the donation of electrons from Cs. Furthermore, density functional theory (DFT) calculations were used to delve deeper into understanding Cs intercalation on the structural evolution of BP.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In Situ EXAFS-Based Nanothermometry of Heterodimer Nanocrystals under Induction Heating

The ability to heat nanocrystalline materials through magnetic induction has been used in the fields of catalysis, biomedical sciences, and polymer degradation. However, the working temperature to which the inductively coupled material rises is still poorly understood. Herein, we use extended X-ray absorption fine structure spectroscopy in conjunction with thermal imaging to improve the understanding of heating in inductively coupled systems. After extraction of the Debye–Waller factor from the spectroscopy, we obtain the temperature of inductively heated nanocrystals from the correlated Debye model. We combine carbon-supported iron oxide nanocrystals as induction heating agents with platinum nanocrystals as thermal probes. By testing these nanocrystal species as both unattached nanocrystals and heterodimers, we report that nanostructured systems show a significant temperature difference of up to 73.60 °C when compared to their local support environment. Furthermore, this result has implications for inductively heated catalysis, magnetic hyperthermia for targeted cell death, and polymer synthesis.

09 BIOMASS FUELS↗
DOE OSTI2022

Photo-Induced Charge Transfer of Fullerene and Non-Fullerene Conjugated Polymer Blends via Ab Initio Excited-State Dynamics

Organic conjugated polymers (CPs) are promising candidates for organic photovoltaic (OPV) devices due to their unique tunable mechanical and optoelectronic performance. Over the last decade, optoelectronic properties of narrow band gap CPs as a blend with acceptor units are largely optimized, which leads to noticeable progress in OPV technology. However, their power conversion efficiency is still lower than their organic counterparts (i.e., silicon), limiting their practical usage. In this study, we employ ab initio molecular dynamics to explore photo-induced charge transfer (CT) of the diketopyrrolopyrrole-based polymer as a blend with non-fullerene (i.e., ITIC) and fullerene (i.e., PCBM) acceptor units. The results of charge carrier dynamics induced by selected photoexcitation show that hole density redistribution in space is much faster than electron relaxation. We track the relaxation rates of charge carriers over time, where the derivative of the difference between the rate of electron and hole implies the current density at zero voltage. Furthermore, this can be utilized to characterize the CT performance of CPs blended with different acceptor units. Relaxation rate results indicate that CP blend with ITIC promises a better PV performance, illustrating that the current computational approach opens the door to determine bulk heterojunctions’ electronic performance for OPV devices and narrowing down the list of potential donor–acceptor candidates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Structure of Water Adsorbed on Nanocrystalline Calcium Silicate Hydrate Determined from Neutron Scattering and Molecular Dynamics Simulations

Calcium silicate hydrate (C-S-H) is a disordered, nanocrystalline material that acts as a primary binding phase in Portland cement. Thin films of water are present on the surfaces and in nanopores of C-S-H, impacting many of its chemical and mechanical properties, such as ion transport, creep, or thermal behavior. Despite decades of research, a full understanding of the structural details of adsorbed, confined, and bulk water in C-S-H remains elusive. In this work, we applied a multitechnique study involving molecular dynamics (MD) simulations validated by neutron diffraction with isotopic substitution (NDIS) and X-ray scattering methods to investigate the structure of water in C-S-H and C-A-S-H (an Al-bearing, low-CO 2 C-S-H substitute). Direct comparison of NDIS data with the MD results reveals that the structure of confined and interfacial water differs significantly from the bulk water and exhibits a larger degree of mesoscale ordering for more hydrated C-S-H structures. As a result, this observation suggests an important role of water as a stabilizer of the atomistic-level structure of C-S-H.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of Gold Catalyst Surface Morphology on Wetting Behavior and Electrochemical CO 2 Reduction Performance in a Large-Area Zero-Gap Gas Diffusion Electrolyzer

We report catalyst surface area and wetting behavior are key factors in determining the performance of gas diffusion electrode (GDE) electrolyzers for electrochemical CO 2 reduction. In this work, we report the integration of sub-1 μm thick nanoporous gold (npAu) catalyst coatings into a large-area (25 cm 2 ) zero-gap electrolyzer. The npAu coatings were prepared by magnetron sputtering (MS) of thin AgAu alloy films on the microporous carbon layer of a gas diffusion layer (GDL) followed by Ag leaching. Compared to MS Au films of the same thickness, npAu catalyst coatings enable higher Faradaic efficiencies and improved catalyst stability for CO 2 -to-CO reduction with Faradaic efficiencies of up to 88% at 100 mA/cm 2 . For a 800 nm npAu coating, the device level energy efficiency for CO 2 to CO conversion reaches 45% (52% for CO + H 2 ) at 100 mA/cm 2 with a single pass CO 2 conversion efficiency of ~12%. Contact angle measurements reveal that npAu coatings provide a more hydrophobic electrode interface compared to MS Au coatings, suggesting that the more hydrophobic interfacial environment of npAu coatings helps mitigating electrode flooding which is associated with performance deterioration over time.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Tuning the Placement of Pt “Single Atoms” on a Mixed CeO 2 –TiO 2 Support

Defect sites on the oxide supports can be used to anchor and activate "single-atoms" catalysts (SACs). By engineering the anchoring sites for supporting SACs, one can alter their electronic and atomic structures which, in turn, define their activity, selectivity, and stability for catalytic reactions. To create and tune unique sites for Pt SACs on CeO 2 support, in this work, we synthesized a system consisting of CeO 2 decorated on TiO 2 nano-oxides for supporting the Pt SACs and investigated the effect of Pt weight loading. Here, a combination of multiple structural characterization methods including diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were employed to characterize the distribution of charge states of single atoms and evaluate the heterogeneity of their binding sites. We have found that the placement of Pt atoms can be tuned on a mixed oxide surface by changing the weight loading of Pt.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Polariton Formation from Soret Band Excitons in Metal–Organic Frameworks and Plasmonic Lattices

This Letter describes strong coupling between a plasmonic nanoparticle (NP) lattice cavity and Soret excitons in a metal–organic framework (MOF) film. In optical transmission measurements, we observed a lower polariton mode that can be spectrally tuned by infiltrating MOF pores with solvents of different refractive index. Using transient absorption spectroscopy, both the lower and upper polariton modes can be resolved, with an estimated Rabi splitting of ~300 meV, nearly twice that of other plasmonic cavity–organic emitter systems. The polariton modes decay more rapidly than that of the uncoupled exciton. Furthermore, this hybrid system highlights the advantages of open plasmonic cavities for tunable coupling and the use of transient absorption spectroscopy to identify polariton modes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Elucidating the Influence of Metal Surface Composition on Organic Adsorbate Binding Using Active Particle Dynamics

The adsorption strengths of organic compounds on metal surfaces are sensitive to the metal composition, and they play a central role in many catalytic reactions, helping to control the coverage of the reactant and altering the overall reaction rate. While adsorption energies are straightforward to measure and calculate in vacuum and gas-phase environments, adsorption energetics can be dramatically altered by the presence of solvent in liquid-phase reactions. However, the effects of metal composition on binding strengths in a liquid environment are less well understood, primarily due to the difficulty of accurate in situ measurements of organic binding on metal surfaces in the liquid phase. Here, we utilize the motion of active particles in water to probe the adsorption energies of an organic adsorbate (furfural) on a range of metal surfaces (pure Pd, pure Pt, and four PdAu alloy compositions) to elucidate the effect of metal composition. Janus particles with catalytic caps of particular metal compositions all exhibited active motion resulting from consumption of H 2 O 2 ; adsorbate binding was inferred through the decrease in the velocity of active motion and was modeled by a Langmuir adsorption isotherm. The measured adsorption affinities were used to extract the adsorption enthalpy of furfural on the different metals. The Pd surface was found to bind furfural more strongly than the Pt surface by some 10 kJ/mol. Furthermore, the adsorption of furfural on the alloys was found to increase monotonically in magnitude with Pd content. As a result, the data reported herein aid the development of accurate understanding of organic adsorption in the presence of solvent and the role of the metal surface in tuning adsorption strengths to optimize catalytic processes in the liquid phase.

36 MATERIALS SCIENCE↗
DOE OSTI2022

O 2 Oxidation and Sublimation Kinetics of Single Silicon Nanoparticles at 1200–2050 K: Variation of Reaction Rates, Evolution of Structural and Optical Properties, and the Active-to-Passive Transition

Sublimation and O 2 etching kinetics for a series of individual silicon (Si) nanoparticles (NPs) were studied for NP temperatures (T NP ) from 1200 to 2050 K, using a single NP mass spectrometry technique. Sublimation was significant for T NP > 1700 K, with rates reasonably well fit to Arrhenius kinetics, but evolving, particularly during initial heating. O 2 etching efficiencies varied from NP-to-NP and with changing T NP , but also evolved dramatically over time. For T NP ≤ 1500 K, NPs were observed to passivate after losing 30 to 50% of the initial NP mass. At higher T NP , etching efficiency decreased over time, but never passivated. Interestingly, bulk Si passivation has not been observed for the range of T NP and O 2 pressures used here, and a model was developed to test the effects of several NP-specific mechanistic parameters on both the initial and time-dependent etching behavior. As a result, the optical properties of the hot NPs were also found to evolve as the NPs etched, particularly during the initial fast mass loss, and correlations between emission intensities and etching kinetics were examined.

77 NANOSCIENCE AND NANOTECHNOLOGY↗