Search NASA⌕ Search

SEARCH · Search NASA

Results for “OUTPUT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Output orientation in R and D: A better approach?

Research and development management is examined as it might be performed under an output-oriented approach in which the company's needs for innovations in various product and production areas were identified. It is shown that a company's R and D program is the aggregate of its needs in various areas of its business. The planning, programming and budgeting approach is applied to R and D. The state of theory on R and D decision making in economics is summarized. Abstracts of articles concerning R and D in industry are included.

Black, G.↗
NASA NTRS1974

Continuous-output terminal-shock-position sensor for mixed-compression inlets evaluated in wind tunnel tests of YF-12 aircraft inlet

An electronic sensor was built to measure the position of the terminal shock in a supersonic inlet. The sensor uses several static-pressure taps in the inlet wall. The sensor output is continuously proportional to shock position. When the sensor was installed in a YF-12 aircraft flight inlet during wind tunnel tests, it indicated shock position within + or - 5 percent of the total distance covered by the static-pressure-tap region. The maximum error caused by an angle of attack change of 4 deg was less than 25 percent. In the region of normal inlet operation, the angle of attack error is negligible. Frequency-response tests show the amplitude ratio is constant out to 60 Hz, and decreases to about 50 percent at 100 Hz, with a phase lag of 50 deg.

Dustin, M. O.↗
NASA NTRS1975

Scanning NASTRAN output data for maximum and minimum values

A computer program called NASCAN (NASTRAN scan) is described. NASCAN enables users to scan lengthy NASTRAN output files for maximum and minimum values in easy user oriented categories. Areas of high stress or deflections in any of the NASTRAN rigid formats are quickly detected and listed out for project documentations. The NASTRAN model is then revised if necessary by updating an input file tape which is processed through the NASTRAN program.

Walker, D. C.↗
NASA NTRS1974

Linear system identification - The application of Lion's identification scheme to a third order system with noisy input-output measurements

A linear system identification technique developed by Lion is adapted for use on a third-order system with six unknown parameters and noisy input-output measurements. A digital computer is employed so that rapid identification takes place with only two state variable filters. Bias in the parameter estimates is partially eliminated by a signal-to-noise ratio testing procedure.

Brown, C. M., Jr.↗
NASA NTRS1975

Continuous cardiac output measurement - Aspects of Doppler frequency analysis

From the suprasternal notch blood flow velocity in the aorta can be measured non-invasively by a Doppler probe. Integration over systole after frequency analysis gives a measure of stroke volume if a separate diameter observation is incorporated. Frequency analysis by a zero crossing counter or by a set of parallel phaselock loops was less effective than a set of bandpass filters. Observations on dogs, baboons and humans before and after exercise or surgery suggest the indications to be useful. Application to judging heart failure by the effect of introducing a volume load is indicated. Changes in output also are measured in freely moving subjects.

Mackay, R. S.↗
NASA NTRS1975

Example of input-output analysis

The thirty sectors included in the ECASTAR energy input-output model were listed. Five of these belong to energy producing sectors, fifteen to manufacturing industries, two to residential and commercial sectors, and eight to service industries. The model is capable of tracing impacts of an action in three dimensions: dollars, BTU's of energy, and labor. Four conservation actions considered were listed and then discussed separately, dealing with the following areas: increase in fuel efficiency, reduction in fuel used by the transportation and warehousing group, manufacturing of smaller automobiles, and a communications/transportation trade-off.

Source record↗
NASA NTRS1975

Input-output analysis of some sector actions

Selected energy conservation actions previously discussed in depth but separately in the areas of the energy industry, the industry sector, the transportation sector, and the residential and commercial sector, were brought together and assessed as a group. Particular emphasis was devoted to identifying secondary or indirect impacts and multiple interactions. Preliminary results obtained from the ECASTAR energy input-output model suggest that the impacts of energy conservation actions can be grossly misrepresented if secondary impacts are not included in the assessment. A methodology which stresses the importance of secondary and multiple interactions permeates the underlying philosophy of this discussion.

Source record↗
NASA NTRS1976

Computer program for single input-output, single-loop feedback systems

Additional work is reported on a completely automatic computer program for the design of single input/output, single loop feedback systems with parameter uncertainly, to satisfy time domain bounds on the system response to step commands and disturbances. The inputs to the program are basically the specified time-domain response bounds, the form of the constrained plant transfer function and the ranges of the uncertain parameters of the plant. The program output consists of the transfer functions of the two free compensation networks, in the form of the coefficients of the numerator and denominator polynomials, and the data on the prescribed bounds and the extremes actually obtained for the system response to commands and disturbances.

Source record↗
NASA NTRS1976

Digital plus analog output encoder

The disclosed encoder is adapted to produce both digital and analog output signals corresponding to the angular position of a rotary shaft, or the position of any other movable member. The digital signals comprise a series of binary signals constituting a multidigit code word which defines the angular position of the shaft with a degree of resolution which depends upon the number of digits in the code word. The basic binary signals are produced by photocells actuated by a series of binary tracks on a code disc or member. The analog signals are in the form of a series of ramp signals which are related in length to the least significant bit of the digital code word. The analog signals are derived from sine and cosine tracks on the code disc.

Hafle, R. S.↗
NASA NTRS1977

Diodes stabilize LED output

Small-signal diodes are placed in series with light-emitting diodes (LED's) to stabilize LED output against temperature fluctuations. Simple inexpensive method compensates for thermal fluctuations over a broad temperature range. Requiring few components, technique is particularly useful where circuit-board space is limited.

Deters, R. A.↗
NASA NTRS1977

Cold air investigation of 4 1/2-stage turbine with stage loading factor of 4.66 and high specific work output. 1: Overall performance

The turbine developed design specific work output at design speed at a total pressure ratio of 6.745 with a corresponding efficiency of 0.855. The efficiency (0.855)was 3.1 points lower than the estimated efficiency quoted by the contractor in the design report and 0.7 of a point lower than that determined by a reference prediction method. The performance of the turbine, which was a forced vortex design, agreed with the performance determined by the prediction method to about the same extent as did the performance of three reference high stage loading factor turbines, which were free vortex designs.

Whitney, W. J.↗
NASA NTRS1977

Communications technology satellite output-tube design and development

The design and development of a 200-watt-output, traveling-wave tube (TWT) for the Communications Technology Satellite (CTS) is discussed, with emphasis on the design evolution during the manufacturing phase of the development program. Possible further improvements to the tube design are identified.

Connolly, D. J.↗
NASA NTRS1977

Design of turbofan engine controls using output feedback regulator theory

A multivariable control design procedure based on output feedback regulator (OFR) theory is applied to the F100 turbofan engine. Results for the OFR design are compared to a design based on linear quadratic regulator (LQR) theory. The OFR feedback control is designed in the full order state space and thus eliminates any need for model reduction techniques. Using the performance measure and control structure of the LQR design, an equivalent OFR feedback control is obtained. The flexibility of the OFR as a control design procedure is demonstrated, and differing feedback control structures are evaluated.

Merrill, W. C.↗
NASA NTRS1976

The effects of spectral variations on silicon cell output

Spectral measurements of daily, total horizontal radiation were analyzed to determine the magnitude and character of the effects in silicon cell output. Data for different seasons and weather conditions are included. Techniques and results are described.

Boes, E. C.↗
NASA NTRS1977

Output feedback regulator design for jet engine control systems

A multivariable control design procedure based on the output feedback regulator formulation is described and applied to turbofan engine model. Full order model dynamics, were incorporated in the example design. The effect of actuator dynamics on closed loop performance was investigaged. Also, the importance of turbine inlet temperature as an element of the dynamic feedback was studied. Step responses were given to indicate the improvement in system performance with this control. Calculation times for all experiments are given in CPU seconds for comparison purposes.

Merrill, W. C.↗
NASA NTRS1976

A pseudo root-locus method for the design of a class of two-input-two-output systems

This paper presents the design of digital rebalance loops for a tuned-rotor gyro which is intended to be an attitude sensor in a strapdown inertial measurement unit. A tuned-rotor gyro is a two-degree-of-freedom gyro which has two input axes, with cross-coupling between them. The rebalance loop of the gyro serves for two purposes. First, it restores the position of the rotor to its null position after experiencing an attitude input. Second, the rebalancing signal, which is proportional to the attitude change, is calibrated to give the desired attitude information. Since the gyro has more than one input and one output, a multivariable control technique is needed for designing the rebalance loop. The analytic model for the gyro is described and the available design methods are examined. A new root-locus design technique specially developed for the present problem is outlined. The design of the rebalance loop using the new technique is given. The computer simulation result of the designed system is presented and discussed.

Kao, M. K.↗
NASA NTRS1979

Two (or more) rotary outputs from one input

Mechanical sequencing device produces cyclic rotations of two outputs from single cyclic rotary input. Device is useful in automatic assemble apparatus, in food-processing machinery, and as controller for sequentially operated valves.

Appleberry, W. T.↗