Search NASA⌕ Search

SEARCH · Search NASA

Results for “Operating Mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Study 2.5 final report. DORCA computer program. Volume 5: Analysis report

A modification of the Dynamic Operational Requirements and Cost Analysis Program to perform traffic analyses of the automated satellite program is described. Inherent in the analyses of the automated satellite program was the assumption that a number of vehicles were available to perform any or all of the missions within the satellite program. The objective of the modification was to select a vehicle or group of vehicles for performing all of the missions at the lowest possible cost. A vehicle selection routine and the capability to simulate ground based vehicle operational modes were incorporated into the program.

Campbell, N.↗
NASA NTRS1972

Integrated space program and vehicle system analysis (study B)

Work accomplished in the analysis of systems, space basing concepts, and space shuttle studies and alternative concepts is reported with emphasis on the preparation of cost estimates. It is concluded that space basing, as an operational mode, permits the assembly and maintenance of large space vehicles and payloads in low earth orbit, and may become the basing mode for space exploration.

Source record↗
NASA NTRS1971

Scientific data reduction and analysis plan: PI services

This plan comprises two parts. The first concerns the real-time data display to be provided by MSC during the mission. The prime goal is to assess the operation of the UVS and to identify any problem areas that could be corrected during the mission. It is desirable to identify any possible observations of unusual scientific interest in order to repeat these observations at a later point in the mission, or to modify the time line with respect to the operating modes of the UVS. The second part of the plan discusses the more extensive postflight analysis of the data in terms of the scientific objectives of this experiment.

Feldman, P. D.↗
NASA NTRS1972

Space tug economic analysis study. Volume 1: Executive summary

An economic analysis of space tug operations is presented. The space tug is defined as any liquid propulsion stage under 100,000 pounds propellant loading that is flown from the space shuttle cargo bay. Two classes of vehicles are the orbit injection stages and reusable space tugs. The vehicle configurations, propellant combinations, and operating modes used for the study are reported. The summary contains data on the study approach, results, conclusions, and recommendations.

Source record↗
NASA NTRS1973

Low-thrust mission risk analysis, with application to a 1980 rendezvous with the comet Encke

A computerized failure process simulation procedure is used to evaluate the risk in a solar electric space mission. The procedure uses currently available thrust-subsystem reliability data and performs approximate simulations of the thrust sybsystem burn operation, the system failure processes, and the retargeting operations. The method is applied to assess the risks in carrying out a 1980 rendezvous mission to the comet Encke. Analysis of the results and evaluation of the effects of various risk factors on the mission show that system component failure rates are the limiting factors in attaining a high mission relability. It is also shown that a well-designed trajectory and system operation mode can be used effectively to partially compensate for unreliable thruster performance.

Yen, C. L.↗
NASA NTRS1973

Geosynchronous platform definition study. Volume 1: Executive summary report

A study was undertaken to examine the feasibility of employing space platforms for geosynchronous operations. The basic approach taken was to define two geosynchronous traffic models and to develop a logical pattern of subsequent analyses leading to the definition of system requirements and conceptual platform designs for each model. Alternative geosynchronous programs were defined using various configurations and operational modes, which were then evaluated to determine a recommended geosynchronous program approach. Later, attention was focused on transportation interfaces in order to define the desired match between geosynchronous platforms and transportation system elements.

Source record↗
NASA NTRS1973

Low-thrust mission risk analysis.

A computerized multi-stage failure process simulation procedure is used to evaluate the risk in a solar electric space mission. The procedure uses currently available thrust-subsystem reliability data and performs approximate simulations of the thrust subsystem burn operation, the system failure processes, and the retargetting operations. The application of the method is used to assess the risks in carrying out a 1980 rendezvous mission to Comet Encke. Analysis of the results and evaluation of the effects of various risk factors on the mission show that system component failure rates is the limiting factor in attaining a high mission reliability. But it is also shown that a well-designed trajectory and system operation mode can be used effectively to partially compensate for unreliable thruster performance.

Yen, C. L.↗
NASA NTRS1973

A neutral-atmosphere composition experiment for the Atmosphere Explorer-C, -D, and -E.

The neutral-atmosphere composition experiment instrumentation is designed to obtain in-situ measurements of neutral thermosphere composition from Atmosphere Explorer-C, -D, and -E. The system is based on previously flown OGO-6 and San Marco-3 composition instruments. The mass-spectrometer sensor includes a gold-plated thermalizing chamber and ion source, a hyperbolic rod quadrupole analyzer, and an off-axis electron multiplier. Automatic ion-source sensitivity control and pulse-counting techniques provide density measurement capability from approximately 125 to 1000 km altitude. The normal operating mode includes measurement at all masses in the range of 1 to 44 amu, with emphasis on hydrogen, helium, oxygen, nitrogen, and argon.

Pelz, D. T.↗
NASA NTRS1973

Josephson junction interference grating.

The maximum current through multiple Josephson structures as a function of applied magnetic field is presented. Particular emphasis is placed on the Josephson penetration depth effects and geometrical considerations. The symmetrical and asymmetrical current feed two-, three-, four-, and five-junction gratings are analyzed and discussed. The Josephson penetration depth is shown to control the amplitude of the interference and diffraction patterns of the interference grating. In addition the interior-junction-length/interference-loop-area product is shown to control the operating mode of the interference grating. The dependence of the magnetic field sensitivity and interference pattern amplitude on the number of junctions is discussed.

Stuehm, D. L.↗
NASA NTRS1973

Verification of performance of the Mariner 9 television cameras.

The large volume of picture data produced by the Mariner 9 Television Experiment, in addition to providing a description of the planet Mars, emphasizes the need for in situ verification of camera performance. Such data provide the basis for initial quantitative image interpretation by confirmation of the relevance of preflight measurement. This information must be the result of planned calibration sequences rather than extraction from nominal mission photography. A lack of sufficient numbers of frames restricted Mariner camera verifications to only limited operational modes under optimal conditions and required significant extrapolation over the duration of the mission. The evidence does suggest that measurable photometric changes occurred, whereas agreement with preflight data is observed for other parameters.

Thorpe, T. E.↗
NASA NTRS1973

Theory of some laser noise effects.

A simple version of the semiclassical theory is applied to the shot effect. Considerations of thermal noise reported by Lamb (1965) are extended to take into account amplitude fluctuations. The laser is considered to be a lossy cavity of the Fabry-Perot type in single-mode operation with a circular frequency driven by an inverted population of active atoms. The electric field is taken to be transverse to the cavity axis. The amplitude and phase are assumed to be slowly varying functions which satisfy two self-consistency equations.

Wang, Y. K.↗
NASA NTRS1973

Institutional environmental impact statement (space shuttle development and operations) amendment no. 1

Data are presented to support the environmental impact statement on space shuttle actions at Kennedy Space Center. Studies indicate that land use to accommodate space shuttle operations may have the most significant impact. The impacts on air, water and noise quality are predicted to be less on the on-site environment. Considerations of operating modes indicate that long and short term land use will not affect wildlife productivity. The potential for adverse environmental impact is small and such impacts will be local, short in duration, controllable, and environmentally acceptable.

Source record↗
NASA NTRS1973

Advanced space engine preliminary design

Analysis and design of an optimum LO2/LH2, combustion topping cycle, 88,964 Newtons (20,000-pound) thrust, liquid rocket engine was conducted. The design selected is well suited to high-energy, upper-stage engine applications such as the Space Tug and embodies features directed toward optimization of vehicle performance. A configuration selection was conducted based on prior Air Force Contracts, and additional criteria for optimum stage performance. Following configuration selection, analyses and design of the major components and engine systems were conducted to sufficient depth to provide layout drawings suitable for subsequent detailing. In addition, engine packaging to a common interface and a retractable nozzle concept were defined. Alternative development plans and related costs were also established. The design embodies high-performance, low-weight, low NPSH requirements (saturated propellant inlet conditions at start), idle-mode operation, and autogenous pressurization. The design is the result of the significant past and current LO2/LH2 technology efforts of the NASA centers and the Air Force, as well as company-funded programs.

Zachary, A. T.↗
NASA NTRS1974

Charged Particle lunar Environment Experiment (CPLEE)

Research development in the Charged Particle Lunar Environment Experiment (CPLEE) is reported. The CPLEE is ion-electron spectrometer placed on the lunar surface for the purpose of measuring charged particle fluxes impacting the moon from a variety of regions and to study the interactions between space plasmas and the lunar surface. The principal accomplishments reported include: (1) furnishing design specifications for construction of the CPLEE instruments; (2) development of an advanced computer-controlled facility for automated instrument calibration; (3) active participation in the deployment and past-deployment operational phases with regard to data verification and operational mode selection; and (4) publication of research papers, including a study of lunar photoelectrons, a study of plasmas resulting from man-made lunar impart events, a study of magnetotail and magnetosheath particle populations, and a study of solar-flare interplanetary particles.

Reasoner, D. L.↗
NASA NTRS1974

Reliability model derivation of a fault-tolerant, dual, spare-switching, digital computer system

A computer based reliability projection aid, tailored specifically for application in the design of fault-tolerant computer systems, is described. Its more pronounced characteristics include the facility for modeling systems with two distinct operational modes, measuring the effect of both permanent and transient faults, and calculating conditional system coverage factors. The underlying conceptual principles, mathematical models, and computer program implementation are presented.

Source record↗
NASA NTRS1973

System design of the Pioneer Venus spacecraft. Volume 10: Propulsion/orbit insertion subsystem studies

The Pioneer Venus orbiter and multiprobe missions require spacecraft maneuvers for successful accomplishment. This report presents the results of studies performed to define the propulsion subsystems required to perform those maneuvers. Primary goals were to define low mass subsystems capable of performing the required missions with a high degree of reliability for low cost. A review was performed of all applicable propellants and thruster types, as well as propellant management techniques. Based on this review, a liquid monopropellant hydrazine propulsion subsystem was selected for all multiprobe mission maneuvers, and for all orbiter mission maneuvers except orbit insertion. A pressure blowdown operating mode was selected using helium as the pressurizing gas. The forces associated with spacecraft rotations were used to control the liquid-gas interface and resulting propellant orientation within the tank.

Rosenstein, B. J.↗
NASA NTRS1973

Method of study of the possibility of predicting the quality of treatment in polishing by vibroacoustical processes

The quality of vibroacoustical surface polishing and the deviation formation process of the surfaces were studied using a polishing mill unit. Data cover spectral composition of vibration accelerations and vibration displacements of individual elements, precision rotation of the polishing circle spindle in static and dynamic operation modes, spectral composition of relative vibrations of polishing circle and the part being processed, statistical and dynamic rigidity of individual elements, and APFC of the elastic system of the mill stand. The effect of individual spindle parameters on vibroacoustical characteristics of the system was also discussed as well as the spectrum measurement of the disturbing force.

Trubnikov, V. V.↗
NASA NTRS1974

Skylab extravehicular mobility unit thermal simulator

The analytical methods, thermal model, and user's instructions for the Skylab Extravehicular Mobility Unit (SEMU) routine are presented. This digital computer program was developed for detailed thermal performance predictions of the SEMU on the NASA-JSC Univac 1108 computer system. It accounts for conductive, convective, and radiant heat transfer as well as fluid flow and special component characterization. The program provides thermal performance predictions for a 967 node thermal model in one thirty-sixth (1/36) of mission time when operated at a calculating interval of three minutes (mission time). The program has the operational flexibility to: (1) accept card or magnetic tape data input for the thermal model describing the SEMU structure, fluid systems, crewman and component performance, (2) accept card and/or magnetic tape input of internally generated heat and heat influx from the space environment, and (3) output tabular or plotted histories of temperature, flow rates, and other parameters describing system operating modes.

Hixon, C. W.↗