Search NASA⌕ Search

SEARCH · Search NASA

Results for “Orbital debris”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

AIAA Survivability Technical Committee Draft

A relatively new area of interest in aerospace systems survivability is the growing threat of spacecraft penetration by orbital debris. Orbital debris, or "space junk", is composed of the man-made remnants of non-functioning spacecraft still orbiting the Earth. NASA estimates that there are currently over 100,000 orbital debris particles 1 centimeter in diameter or larger that cannot be tracked by existing radar, with the population growing at approximately 4% per year in low earth orbits. With an average velocity of over 8.7 km/sec, these projectiles can penetrate and disable many vulnerable spacecraft systems. Since the likelihood of spacecraft penetration increases with spacecraft surface area, large spacecraft (such as the International Space Station) and communication satellite fleets (such as Iridium) have begun to adopt survivability enhancement strategies similar to those employed by combat aircraft. Collision avoidance maneuvers are commonly practiced by the Space Shuttle and are planned by the International Space Station to decrease their susceptibility to impact by trackable orbital debris; likewise, improved shielding, internal equipment placement, and improved crew operations following penetration can reduce the vulnerability of spacecraft to loss following orbital debris impact. Computer simulations such as the Manned Spacecraft and Crew Survivability (MSCSurv) program at the NASA-Marshall Space Flight Center have recently been developed to quantify and reduce the likelihood of crew or spacecraft loss following orbital debris penetration. The AIAA Survivability Technical Committee is working to enable the transfer of military-developed survivability technologies to help the aerospace industry cope with this growing threat.

Shipman, Jim↗
NASA NTRS1985

Survey of probable micrometer-sized Earth-orbital debris fragments in the NASA-JSC cosmic dust sample collection

A program to collect extraterrestrial dust samples from the stratosphere using impactors mounted on NASA U-2 and WB-57F aircraft is discussed. Sample collection, preparation, and analysis techniques are described and the particle types found are reviewed. Preliminary examination of the particles indicates that they represent not only extraterrestrial material, but some fraction of terrestrial contamination from both natural and manmade sources. This examination involves a combination of optical microscopy, scanning electron microscopy (SEM) and qualitative bulk elemental analysis using an energy-dispersive X-ray spectrometer (EDS) to characterize each particle. The cosmic dust collection contains samples of at least three classes of material that may present some hazard to extended spacecraft operations in near-Earth orbit: (1) micrometeorites/cosmic dust, (2) aluminum oxide spheres, and (3) alloy spherules and fragments.

Clanton, U. S.↗
NASA NTRS1986

The solar maximum satellite capture cell: Impact features and orbital debris and micrometeoritic projectile materials

The physical properties of impact features observed in the Solar Max main electronics box (MEB) thermal blanket generally suggest an origin by hypervelocity impact. The chemistry of micrometeorite material suggests that a wide variety of projectile materials have survived impact with retention of varying degrees of pristinity. Impact features that contain only spacecraft paint particles are on average smaller than impact features caused by micrometeorite impacts. In case both types of materials co-occur, it is belevied that the impact feature, generally a penetration hole, was caused by a micrometeorite projectile. The typically smaller paint particles were able to penetrate though the hole in the first layer and deposit in the spray pattern on the second layer. It is suggested that paint particles have arrived with a wide range of velocities relative to the Solar Max satellite. Orbiting paint particles are an important fraction of materials in the near-Earth environment. In general, the data from the Solar Max studies are a good calibration for the design of capture cells to be flown in space and on board Space Station. The data also suggest that development of multiple layer capture cells in which the projectile may retain a large degree of pristinity is a feasible goal.

Mckay, D. S.↗
NASA NTRS1993

Resolving LDEF's flux distribution: Orbital (debris?) and natural meteoroid populations

A consistent methodology for the collation of data from both penetration and perforation experiments and from data in the Meteoroid and Debris Special Investigator Group (M-D SIG) data-base has led to the derivation of the average impact flux over LDEF's exposure history 1984-1990. Data are first presented for LDEF's N,S,E,W and Space faces ('offset' by 8 deg and 'tilted' by 1 deg respectively). A model fit is derived for ballistic limits of penetration from 1 micron to 1mm of aluminium target, corresponding to impactor masses from 10(exp -18) kg (for rho sub p = 2g/cu cm) to 10(exp -10) kg (for rho sub p = 1g/cu cm). A second order harmonic function is fitted to the N,S,E, and W fluxes to establish the angular distribution at regular size intervals; this fit is then used to provide 'corrected' data corresponding to fluxes applicable to true N,S,E,W and Space directions for a LEO 28.5 degree inclination orbit at a mean altitude of 465 km.

Mcdonnell, J. A. M.↗
NASA NTRS1973

Impact gages for detecting meteoroid and other orbital debris impacts on space vehicles.

Impacts on space vehicles have been simulated using the McDonnell Douglas Aerophysics Laboratory (MDAL) Light-Gas Guns to launch particles at hypervelocity speeds into scaled space structures. Using impact gages and a triangulation technique, these impacts have been detected and accurately located. This paper describes in detail the various types of impact gages (piezoelectric PZT-5A, quartz, electret, and off-the-shelf plastics) used. This description includes gage design and experimental results for gages installed on single-walled scaled payload carriers, multiple-walled satellites and space stations, and single-walled full-scale Delta tank structures. A brief description of the triangulation technique, the impact simulation, and the data acquisition system are also included.

Mastandrea, J. R.↗
NASA NTRS1983

An Assessment of Potential Detectors to Monitor the Man-made Orbital Debris Environment

Observations using NORAD radar showed that man made debris exceeds the natural environment for large objects. For short times (a few days to a few weeks) after solid rocket motor (SRM) firings in LEO, man made debris in the microparticle size range also appears to exceed the meteoroid environment. The properties of the debris population between these size regimes is currently unknown as there has been no detector system able to perform the required observations. The alternatives for obtaining data on this currently unobserved segment of the population are assessed.

Reynolds, R. C.↗
NASA NTRS1985

Manmade orbital debris studies at NASA Langley

In the past, flight experiments to define the meteoroid environment near the Earth and in interplanetary space were undertaken. The effectiveness of meteoroid bumpers was investigated. These flight experiments were aboard Pioneer 10, Pioneer 11, and Explorer 46. Hypervelocity impact tests were conducted in the laboratory to study protective structures and the composition of meteoroids from the hundreds of meteor spectra obtained. It was also found that manmade debris presented a similar hazard to spacecraft near the Earth. An assessment of that hazard is made in this paper. An analysis of the collision probability problem with much attention given to the population of small untrackable fragments created during explosions is presented.

Humes, D. H.↗
NASA NTRS1985

Examination of returned solar-max surfaces for impacting orbital debris and meteoroids

The thermal insulation of the Solar Maximum Mission launched on 14 February 1980 which consisted of 17 layers of alumized Kapton offers an excellent opportunity to obtain chemistry of impacting particles. To date, approximately 0.7 sq. met. of the insulation and 0.05 sq. met. of the aluminum louvers have been mapped by optical microscope for crater diameters larger than 40 microns. Atomic oxygen has eroded up to 20 microns of the exposed Kapton surfaces removing the older and smaller craters. The crater size distribution found on 3 different Kapton surfaces is shown. About 250 chemical spectra were recorded of particles observed in or around impact pits or in the debris pattern found on the second layer beneath impact holes in the outer layer. The debris populations are listed and discussed.

Kessler, D. J.↗
NASA NTRS1989

Design of an orbital debris radar ground demonstration

A breadboard radar system is being designed and tested at NASA Johnson for dealing with the space debris problem that could present a growing threat to Space Station Freedom. The major design problems are due to the small radar cross section of such debris (below -30 dBm2), the high closing velocities of the particles with respect to the Space Station (10 km/sec and higher), and the stringent weight, power-consumption, maintenance, and reliability constraints on spaceborne systems. Consideration is given to the preliminary implementation of a ground demonstration radar for testing concepts, technologies, and performance envelopes for application to the space-borne debris detection and tracking radar. Simulation results and techniques developed for predicting system performance and for evaluating antenna parameters are given. The design process of the electronically steered phased array antenna is briefly described, and block diagrams for the implementation of the radar system are given.

Paz, I.↗
NASA NTRS1991

On protection of Freedom's solar dynamic radiator from the orbital debris environment. Part 2: Further testing and analyses

Presented here are results of a test program undertaken to further define the response of the solar dynamic radiator to hypervelocity impact (HVI). Tests were conducted on representative radiator panels (under ambient, nonoperating conditions) over a range of velocity. Target parameters are also varied. Data indicate that analytical penetration predictions are conservative (i.e., pessimistic) for the specific configuration of the solar dynamic radiator. Test results are used to define the solar dynamic radiator reliability with respect to HVI more rigorously than previous studies. Test data, reliability, and survivability results are presented.

Rhatigan, Jennifer L.↗
NASA NTRS1990

Augmentation of orbital debris shielding for Space Station Freedom

Augmentation concepts for the Space Station Freedom (SSF) are described in detail and advantages and disadvantages of various proposals are evaluated. It is pointed out that early augmentation of SSF debris shielding, which would take place 6-9 years after the First Element Launch, could provide the greatest advantages to the program in terms of weight, cost, and safety benefits. Potential augmentation concepts include an attached, rigid aluminum second bumper; the multi-shock shield concept; a mesh double bumper concept; a debris shield augmentation element; a multi-shock airbag protection concept for 2-10 cm debris; and a debris sweeper. Requirements for and operation and deployment of these concepts are described in detail and an example of the augmentation effect on cumulative SSF probability of no-failure from debris and meteoroid impacts is given. An estimate of predicted encounter rates between debris and a 100 m radius sphere around SSF is presented.

Christiansen, Eric L.↗
NASA NTRS1990

Radar observations of orbital debris at NASA Johnson Space Center

This paper describes the original Debris Environment Characterization Radar concept and the design verification experiments developed and carried out with the purpose of establishing methods for assessing the hazards to the Space Station Freedom from radar measurements. Three design verification experiments, utilizing the Arecibo, the Goldstone, and the ALCOR radars were performed. Data obtained from RCS measurements of a representative sample of debris from ground-test hypervelocity impacts and from explosions of simulated satellites will be used to establish a relationship between the physical size of a randomly shaped debris object and its RCS.

Stansbery, E. G.↗
NASA NTRS1990

United States studies in orbital debris - Prevention and mitigation

Debris in space has become an issue that has commanded considerable interest in recent years as society has become both more dependent upon space based systems, and more aware of its dependence. After many years of study the United States Space Policy of February 1988 directed that all sectors of the U.S. community minimize space debris. Other space organizations have adopted similar policies. Among the study activities leading to the policy and to subsequent implementing directives were discussions with the ESA, NASDA, and other space operating agencies. The policy derived from technical consensus on the nature of the issues and upon the courses of action available to mitigate the problem, but there remains the concern as to the adequacy of the data to define cost effective strategies. There are now in place mechanisms to continue technical discussions in more formal terms.

Loftus, Joseph P., Jr.↗
NASA NTRS1991

Meteoroid and orbital debris record of the Long Duration Exposure Facility's frame

The gravity stabilization feature of the NASA Long Duration Exposure Facility (LDEF), which was recovered in January 1990 after 5.7 years of continuous exposure to the LEO environment, has allowed the resolution of the flux and trajectories of impacting meteoroids and space-debris particulates. Attention is presently given to the stereoscopic video imaging results obtained for the large impact features on the LDEF's aluminum frame. Extreme directionalities appear to typify impacting particulates larger than 0.1 mm in diameter; this is not explainable in light of current models. Recommendations for further LDEF analyses to ensure the safe design of future spacecraft are presented.

Zolensky, Michael↗
NASA NTRS1992

Orbital debris risk analysis and survivability enhancement for Freedom Station manned modules

This paper briefly reviews how 'probability of penetration' analyses are currently performed at NASA, and discusses extension of this procedure to a 'probability of loss' analysis through identifying penetration hazards and failure modes. It goes on to discuss alternatives for increasing crew safety through redesign and/or augmentation of interior manned module systems, and describes an elementary analysis maximizing crew safety considering one identified penetration-induced failure mode (depressurization) and one interior design factor (number of hatches open).

Williamsen, Joel E.↗