SEARCH · Search NASA
Results for “Oxides”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Rapid Laser Processing of Thin Sr-Doped LaCrO 3– δ Interconnects for Solid Oxide Fuel Cells
Not provided.
In situ liquid SIMS analysis of uranium oxide
Trace analysis of nuclear materials in solid particles collected in the environment or particles in liquid slurry generated in nuclear material manufacturing processes can pinpoint elemental, organic, and isotopic signatures of nuclear fuel cycle activities and processes. Such information can support nuclear safeguards programs by increasing our ability to detect undeclared nuclear materials, routine activities for safeguarding at declared facilities, and illicit activities. However, trace radioactive material analysis in liquids and slurries is challenging using bulk approaches. For example, one drawback of sensitive analysis such as inductively coupled plasma mass spectrometry (ICP-MS) is that sample is consumed or destroyed as a result of the technical approach. We developed a vacuum compatible microfluidic interface to enable surface analysis of liquids and liquid-solid interactions using time-of-flight secondary ion mass spectrometry (ToF-SIMS). In this work, we illustrate initial results of liquid standards containing uranium using in situ liquid SIMS. Specifically a series of diluted uranium standards used for ICPMS analysis were studied and the limit of detection was estimated. Since the liquid SIMS analysis is almost nondestructive, the same sample can be analyzed by other more destructive approaches afterwards or saved for future references. Consequently, multimodal analysis is possible. Our results demonstrate that in situ liquid SIMS can be used as a new approach to analyze radioactive materials in liquid and slurry forms of relevance to the IAEA safeguards missions.
In situ structural study of manganese and iron oxide promoted rhodium catalysts for oxygenate synthesis
Explore the source record for details and available documents.
Elucidating the role of $\mathrm{Fe}$-$\mathrm{Mo}$ interactions in the metal oxide precursors for Fe promoted $\mathrm{Mo/ZSM}$-5 catalysts in non-oxidative methane dehydroaromatization
Literature shows that adding Fe as a separate phase to MoO 3 /ZSM-5 catalysts can improve benzene selectivity in methane dehydroaromatization (MDA), but only when added in small quantities, making it difficult to characterize the state of Fe in the catalyst and understand the role of Fe-Mo interactions on the catalytic properties. We explore how the nature of the Mo-Fe interactions in the catalyst precursor can influence the stability and product selectivity in MDA, by employing for the first time Fe 2 (MoO 4 ) 3 /ZSM-5 as a catalyst precursor in MDA. We have compared the activity of Fe 2 (MoO 4 ) 3 /ZSM-5 with monometallic MoO 3 /ZSM-5 and mixed MoO 3 + Fe 2 O 3 /ZSM-5 containing equivalent Mo and Fe loadings and found that Fe 2 (MoO 4 ) 3 /ZSM-5 shows higher benzene selectivity than the mixed MoO 3 + Fe 2 O 3 /ZSM-5 catalyst and exhibits higher stability in reaction compared to the monometallic MoO3/ZSM-5 catalyst. Structural characterization suggests that Fe 2 (MoO 4 ) 3 partially segregates to Fe 2 O 3 and amorphous MoO x during thermal pretreatment. The MoO x species migrate into the zeolite channels during pretreatment, while Fe oxides remain on the external surface of the zeolite. Gas adsorption/desorption techniques and density functional theory calculations demonstrate that the preexisting Fe 2 O 3 phases on the external surface of the zeolite in the mixed MoO 3 + Fe 2 O 3 /ZSM-5 precursor trap (MoO 3 ) 3 clusters preventing them from migrating into the zeolite channels during pretreatment, whereas gradual formation of amorphous MoOx together with the segregation of the Fe 2 O 3 phase when using the Fe 2 (MoO 4 ) 3 precursor diminishes trapping of (MoO 3 ) 3 and consequently enhances migration and anchoring of the MoO x species in the zeolite channels, boosting selectivity to benzene. Characterization of used catalysts suggests that the presence of Fe promotes formation of structured carbon nanofibers which reduce the rate of catalyst deactivation.
Oxide dispersoid coherency of a ferritic-martensitic 12Cr oxide-dispersion-strengthened alloy under self-ion irradiation
Ferritic-martensitic oxide-dispersion-strengthened (ODS) alloy has shown excellent mechanical property and high radiation tolerance. However, the stability of dispersoids during displacive irradiation in the individual ferritic and martensitic phases is unclear. In this work, the correlation among dispersoid coherency, size, density, and matrix phase are studied in dual-phase 12Cr ODS after 100 peak displacements-per-atom (dpa) irradiation at 475°C, using 3.5 MeV Fe 2+ self-ions. The size and density changes of coherent and incoherent dispersoids were analyzed as a function of irradiation depth. The average dispersoid size decreased after irradiation in both phases, and the large incoherent dispersoids in the tempered martensite phase underwent a more dramatic change than those in the ferrite phase. The dispersoid density significantly increased in the ferrite phase within the irradiated region, mostly resulting in an increase in coherent dispersoid density. On the other hand, only a small change in density was observed in the tempered martensite phase for both coherent and incoherent dispersoids. This study shows that dispersoid evolution is dramatically different in ferrite and tempered martensite phases.
Intrinsic Li Distribution in Layered Transition-Metal Oxides Using Low-Dose Scanning Transmission Electron Microscopy and Spectroscopy
Understanding Li distribution in layered lithium transition-metal oxide (LiTMO) cathodes in Li-ion batteries has been a major challenge at the atomic scale and nanoscale. Li is extremely difficult to study by transmission electron microscopy (TEM) because the high-energy electrons impart significant energy and cause massive migration. Here, we directly map the intrinsic spatial distribution and bonding of Li in LiNiO 2 -layered cathode materials using low-dose and low-loss electron energy loss spectroscopy (EELS). EELS spectra of the Li–K edge are measured simultaneously with O–K and Ni–L, M 3,2 edges from layered, cation-mixed, and rock-salt phases and directly matched with atomic-resolution scanning TEM images to correlate the changes in peak intensities and positions to the stoichiometry changes with continual loss of Li and O. Changes in the Li content in the LiNiO 2 particles as a function of electron beam dose are studied by sequential Li spectroscopic mapping. We show that the “intrinsic” Li distribution can be observed using a total dose of less than ~1.5 × 10 8 e – nm –2 at an accelerating voltage of 80 kV. The method of nanoscale mapping of Li distribution introduced in this study is applicable to high-Ni LiTMO cathode materials (>89% of Ni) as well as LiNiO 2 . Further study on the extra peaks of the Li–K edge reveals that the peak at ~59 eV is from the Li ions intercalated in between NiO 2 layers barely interacting with each other with less Li K shell electrons pulled to the L shell electrons in NiO 2 . Furthermore, the results shown here provide improved low-loss TEM characterization approaches that can be used to understand the intrinsic fundamental behaviors in Li-ion batteries.
Local and Bulk Probe of Vanadium-Substituted α-Manganese Oxide (α-KxVyMn8-yO16) Lithium Electrochemistry
Explore the source record for details and available documents.
Enhanced Oxide Reduction by Hydrogen at Cuprous Oxide–Copper Interfaces near Ascending Step Edges
We report that understanding the dynamic processes involved in the interaction of hydrogen with oxides is of fundamental importance in catalysis. This paper probes the reduction of Cu 2 O-‘29’ surfaces by hydrogen at room temperature combining in situ ambient pressure scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. Reduction of the atomic layer thin Cu 2 O film is observed to be preferentially initiated2 at step edges and terrace defects, where perfect Cu 2 O(111) terraces are found to be stable towards hydrogenation under the same conditions. After a long induction period, regions of partially reduced Cu 2 O-‘29’ and metallic Cu co-exist before the surface is fully reduced to Cu(111). The reduction rate strongly depends on the nature of nearby Cu step edges. We propose a mechanism for the reduction of Cu 2 O-‘29’ by hydrogen where free copper atoms from ascending metallic step edges facilitate the formation of active ensembles for H 2 dissociation and transfer H to the edges of Cu2O regions
Surface Reactions and Catalytic Activities for Small Alcohols over LaMnO3(100) and La0.7Sr0.3MnO3(100): Dehydrogenation, Dehydration, and Oxidation
Explore the source record for details and available documents.
Spin-Selective Oxygen Evolution Reaction in Chiral Iron Oxide Nanoparticles: Synergistic Impact of Inherent Magnetic Moment and Chirality
Electron spin polarization is identified as a promising avenue for enhancing the oxygen evolution reaction (OER), which is the bottleneck that limits the energy efficiency of water-splitting. Here, in this work, we report that both ferrimagnetic (f-Fe 3 O 4 ) and superparamagnetic iron oxide (s-Fe 3 O 4 ) catalysts can exhibit external magnetic field (Hext)-induced OER enhancement, and the activity is proportional to their intrinsic magnetic moment. Additionally, the chirality-induced spin selectivity (CISS) effect was utilized in synergy with Hext to get a maximum enhancement of up to 89% improvement in current density (at 1.8 V vs RHE) with a low onset potential of 270 mV in s-Fe 3 O 4 catalysts. Spin polarization and the resultant spin selectivity suppress the production of H 2 O 2 and promote the formation of ground state triplet O 2 during the OER. Furthermore, the design of chiral s-Fe 3 O 4 with synergistic spin potential effect demonstrates a high spin polarization of ∼42%, as measured using conductive atomic force microscopy (c-AFM).
Synthesis of [60]- and [70]Fullerene-Fused Tetrahydroquinoxaline Derivatives by Oxidative [4 + 2] Cycloaddition with Unusual Reactivity and Regioselectivity
The oxidative [4 + 2] reaction of o-phenylenediamine-derived disulfonamides with fullerene C 60 and C 70 is reported, in which electron-deficient reactants showed high reactivity. The reaction of C 70 exhibited unusual regioselectivity, yielding a [5,6]-adduct as the major product, which was characterized by 1 H, 13 C NMR and single-crystal X-ray diffraction. Here, DFT calculations revealed the reaction is an inverse-electron-demand Diels–Alder (IEDDA) reaction, and the [5,6]-adduct of C 70 is a kinetic product.
Glassy Carbon Substrate Oxidation Effects on Electrode Stability for Oxygen Evolution Reaction Catalysis Stability Benchmarking
Employing benchmarking metrics to capture the activity and stability of electrocatalysts for the oxygen evolution reaction (OER) in acid is a critical practice that enables meaningful comparison of catalyst material candidates reported throughout the literature. In this work, we find that ubiquitously used glassy carbon electrode substrates oxidize under typical OER operating conditions, forming a pacified, electrically insulating, and oxygen-rich surface layer that causes drastic loss of current density over the course of extended chronoamperometric stability tests at an anodic potential of 1.7 VRHE. We show that the experimentally observed stability of glassy carbon-based electrodes is approximately two orders of magnitude lower than that expected solely from dissolution-based catalyst intrinsic stability of Ir-based catalysts. We additionally find that glassy carbon-based electrode stability measured by chronoamperometric holds is greatly impacted by catalyst loading, with high catalyst loadings improving the stability of the overall electrode via a protective effect on the glassy carbon substrate. Altogether, our investigation highlights that glassy carbon is not electrochemically inert under OER conditions on the timescale of common stability tests, which can cause electrodes to exhibit performance losses that do not reflect the intrinsic stability of the actual catalyst material being investigated. In light of our findings, we underscore the usefulness of metrics, such as the S-number, to reflect intrinsic catalyst material stability.
Solid Electrolytes for Li–S Batteries: Solid Solutions of Poly(ethylene oxide) with Li x PON- and Li x SiPON-Based Polymers
We report here efforts to synthesize free-standing, dry polymer electrolytes that exhibit superior ionic conductivities at ambient for Li–S batteries. Co-dissolution of poly(ethylene oxide) (PEO) (M n 900k) with Li x PON and Li x SiPON polymer systems at a ratio of approximately 3:2 followed by casting provides transparent, solid-solution films 25–50 μm thick, lowering PEO crystallinity, and providing measured impedance values of 0.1–2.8 × 10 –3 S/cm at ambient. These values are much higher than simple PEO/Li + salt systems. These solid-solution polymer electrolytes (PEs) are (1) thermally stable to 100 °C; (2) offer activation energies of 0.2–0.5 eV; (3) suppress dendrite formation; and (4) enable the use of lithium anodes at current densities as high as 3.5 mAh/cm 2 . Here, galvanostatic cycling of SPAN/PEs/Li cell (SPAN = sulfurized, carbonized polyacrylonitrile) shows discharge capacities of 1000 mAh/g sulfur at 0.25C and 800 mAh/g sulfur at 1C with high coulumbic efficiency over 100 cycles.
Laponite-Incorporated UiO-66-NH2-Polyethylene Oxide Composite Membranes for Protection against Chemical Warfare Agent Simulants
A strategy is developed to enhance the barrier protection of polyethylene oxide (PEO)-metal–organic framework (MOF) composite films against chemical warfare agent simulants. To achieve enhanced protection, an impermeable high-aspect-ratio filler in the form of Laponite RD (LRD) clay platelets was incorporated into a composite PEO film containing MOF UiO-66-NH 2 . The inclusion of the platelets aids in mitigating permeation of inert hydrocarbons (octane) and toxic chemicals (2-chloroethyl ethyl sulfide, 2-CEES) of dimensions/chemistry similar to prominent vesicant threats while still maintaining high water vapor transport rates (WVTR). By utilizing small-angle neutron scattering, small-angle X-ray scattering, and wide-angle X-ray scattering, the LRD platelet alignment of the films was determined, and the structure of the films was correlated with performance as a barrier material. Performance of the membranes against toxic chemical threats was assessed using permeation testing of octane and 2-CEES, a common simulant for the vesicant mustard gas, and breathability of the membranes was assessed using WVTR measurements. To assess their robustness, chemical exposure (in situ diffuse reflectance infrared Fourier transform spectroscopy) and mechanical (tensile strength) measurements were also performed. It was demonstrated that the barrier performance of the film upon inclusion of the LRD platelets exceeds that of other MOF-polymer composites found in the literature and that this approach establishes a new path for improving permselective materials for chemical protection applications.
Compressive Strain Reduces the Hydrogen Evolution and Oxidation Reaction Activity of Platinum in Alkaline Solution
Explore the source record for details and available documents.